Search NASA⌕ Search

SEARCH · Search NASA

Results for “Newton-Raphson”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

An algorithm and computer program to locate real zeros of real polynomials

A method for reliably extracting real zeros of real polynomials using an expanded two-point secant and bisection method is formed into an algorithm for a digital computer, and a computer program based on this algorithm is presented. The results obtained with the program show that the proposed method compares favorably with the Laguerre, Newton-Raphson, and Jenkins-Traub methods when the polynomial has all real zeros, and is more efficient when the polynomial has complex zeros.

Hedgley, D. R., Jr.↗
NASA NTRS1975

A triangular thin shell finite element: Nonlinear analysis

Aspects of the formulation of a triangular thin shell finite element which pertain to geometrically nonlinear (small strain, finite displacement) behavior are described. The procedure for solution of the resulting nonlinear algebraic equations combines a one-step incremental (tangent stiffness) approach with one iteration in the Newton-Raphson mode. A method is presented which permits a rational estimation of step size in this procedure. Limit points are calculated by means of a superposition scheme coupled to the incremental side of the solution procedure while bifurcation points are calculated through a process of interpolation of the determinants of the tangent-stiffness matrix. Numerical results are obtained for a flat plate and two curved shell problems and are compared with alternative solutions.

Thomas, G. R.↗
NASA NTRS1975

Flight instrumentation specification for parameter identification: Program user's guide

A set of four digital computer programs is presented which can be used to investigate the effects of instrumentation errors on the accuracy of aircraft and helicopter stability-and-control derivatives identified from flight test data. The programs assume that the differential equations of motion are linear and consist of small perturbations about a quasi-steady flight condition. It is also assumed that a Newton-Raphson optimization technique is used for identifying the estimates of the parameters. Flow charts and printouts are included.

Mohr, R. L.↗
NASA NTRS1974

Optimization of self-acting herringbone journal bearings for maximum stability

The stability of herringbone grooved journal bearings was increased by optimizing the groove depth, width, length, and angle. Optimization was performed on the basis of a small-eccentricity infinite-groove analysis in combination with a previously developed Newton-Raphson procedure for bearings with the smooth member rotating or with the grooved member rotating at low compressibility numbers. A newly-developed vector technique for bearings with the grooved member rotating at high compressibility numbers also was used in the analysis. The design curves obtained are suitable for choosing the optimum bearing for a wide range of operating conditions (compressibility numbers from 0 to 80, length to diameter ratios from 1/4 to 2, and smooth or grooved member rotating). Compared to bearings optimized for maximum load, bearings optimized for maximum stability are shown to provide a drastic increase in bearing-supported mass. Bearings with grooved member rotating are substantially more stable than bearing with smooth member rotating, particularly at high compressibility numbers.

Fleming, D. P.↗
NASA NTRS1975

A two-level trajectory decomposition algorithm featuring optimal intermediate target selection

A decomposition algorithm is presented that optimizes complex missions by partitioning the trajectory into natural segments such as ascent or entry. Each segment defines a full-rank targeting subproblem. These are solved sequentially using the Newton-Raphson algorithm. The master problem, representing the complete mission, is to determine subproblem targets and master-problem controls that optimize the mission objective subject to intersegment constraints. The gradient projection algorithm solves this problem using derivatives obtained analytically from finite-difference subproblem sensitivities. Thus, the mission is optimized by coordinating the solution of tractible subproblems. Computational results for a synchronous equatorial mission are included.

Petersen, F. M.↗
NASA NTRS1976

Symmetric stiffness matrix for incompressible hyperelastic materials

Symmetric structure matrices are derived for solving plane strain and axisymmetric problems involving incompressible hyperelastic materials. An infinite hollow cylinder subjected to internal pressure is considered as an example. Displacement and hydrostatic pressure profiles are calculated using the Newton-Raphson iteration technique. The results are in good agreement with the exact curves.

Takamatsu, T.↗
NASA NTRS1976

TAP 1: A Finite Element Program for Steady-State Thermal Analysis of Convectively Cooled Structures

The program has a finite element library of six elements: two conduction/convection elements to model heat transfer in a solid, two convection elements to model heat transfer in a fluid, and two integrated conduction/convection elements to represent combined heat transfer in tubular and plate/fin fluid passages. Nonlinear thermal analysis due to temperature dependent thermal parameters is performed using the Newton-Raphson iteration method. Program output includes nodal temperatures and element heat fluxes. Pressure drops in fluid passages may be computed as an option. A companion plotting program for displaying the finite element model and predicted temperature distributions is presented. User instructions and sample problems are presented in appendixes.

Thornton, E. A.↗
NASA NTRS1976

Optimal reusable-tug and expendable-kickstage trajectories for high-energy planetary missions including correction for nodal precession

Equations are derived by using branched trajectory optimization techniques and the maximum principle to maximize the payload capability of a reusable tug/expendable kickstage vehicle configuration for planetary missions. The two stages and the payload are launched into a low earth orbit by a single space shuttle. The analysis includes correction for precession of the orbit. This correction is done by the tug. The tug propels the payload and the kickstage to an energy beyond earth escape and returns within a specified time to the precessed orbit. After separating from the tug, the kickstage accelerates the payload to the required injection conditions. Planetary injection conditions are specified by the mission energy and a fixed declination and right ascension of the outgoing asymptote. The multipoint boundary value problem resulting from the analysis is solved by a Newton-Raphson iteration technique. Partial derivatives of the boundary conditions are obtained by perturbing the initial conditions one at a time, integrating the trajectory and adjoint equations, and observing the changes in boundary conditions. Maximum payload capability is derived for two typical mission energies. In addition, the variations of several mission and stage parameters are also examined.

Borsody, J.↗
NASA NTRS1976

Voltage profile program for the Kennedy Space Center electric power distribution system

The Kennedy Space Center voltage profile program computes voltages at all busses greater than 1 Kv in the network under various conditions of load. The computation is based upon power flow principles and utilizes a Newton-Raphson iterative load flow algorithm. Power flow conditions throughout the network are also provided. The computer program is designed for both steady state and transient operation. In the steady state mode, automatic tap changing of primary distribution transformers is incorporated. Under transient conditions, such as motor starts etc., it is assumed that tap changing is not accomplished so that transformer secondary voltage is allowed to sag.

Source record↗
NASA NTRS1977

The terminal area automated path generation problem

The automated terminal area path generation problem in the advanced Air Traffic Control System (ATC), has been studied. Definitions, input, output and the interrelationships with other ATC functions have been discussed. Alternatives in modeling the problem have been identified. Problem formulations and solution techniques are presented. In particular, the solution of a minimum effort path stretching problem (path generation on a given schedule) has been carried out using the Newton-Raphson trajectory optimization method. Discussions are presented on the effect of different delivery time, aircraft entry position, initial guess on the boundary conditions, etc. Recommendations are made on real-world implementations.

Hsin, C.-C.↗
NASA NTRS1978

Predicting surface heat flux

Report presents technique involving single embedded thermocouple used to predict flux and temperature for high-or-low conductivity materials that have temperature-and-pressure dependent properties. Technique solves for heat rate and temperature at given surface at each time step, rather than for entire history. Newton-Raphson technique is used for temperature solutions; then quadratic fit is employed. Report contains representative graphs and tables.

Curry, D. M.↗
NASA NTRS1977

A two-level trajectory decomposition algorithm featuring optimal intermediate target selection

A decomposition algorithm is presented which optimizes complex missions by partitioning the trajectory into natural segments such as ascent or entry. Each segment defines a full-rank targeting subproblem. These are solved sequentially using the Newton-Raphson algorithm. The master problem, representing the complete mission, is to determine subproblem targets and master-problem controls that optimize the mission objective subject to intersegment constraints. The gradient projection algorithm solves this problem using derivatives obtained analytically from finite-difference subproblem sensitivities. Thus, the mission is optimized by coordinating the solution of tractible subproblems. Computational results for a synchronous equatorial mission are included.

Petersen, F. M.↗
NASA NTRS1978

A finite element thermal analysis procedure for several temperature-dependent parameters

A finite-element thermal analysis procedure for elements with several temperature-dependent thermal parameters is presented. The procedure, based on an application of the Newton-Raphson iteration technique, is formulated by resolving element matrices into component matrices, one component for each thermal parameter. Component conductance matrices are evaluated by assuming constant thermal parameters within an element and are computed once per unit thermal parameter. Significant savings in computer time result from the unit thermal parameter concept. The solution procedure applied to a convectively cooled structure with significantly varying thermal parameters converged in four iterations.

Thornton, E. A.↗
NASA NTRS1980

TAP 2: A finite element program for thermal analysis of convectively cooled structures

A finite element computer program (TAP 2) for steady-state and transient thermal analyses of convectively cooled structures is presented. The program has a finite element library of six elements: two conduction/convection elements to model heat transfer in a solid, two convection elements to model heat transfer in a fluid, and two integrated conduction/convection elements to represent combined heat transfer in tubular and plate/fin fluid passages. Nonlinear thermal analysis due to temperature-dependent thermal parameters is performed using the Newton-Raphson iteration method. Transient analyses are performed using an implicit Crank-Nicolson time integration scheme with consistent or lumped capacitance matrices as an option. Program output includes nodal temperatures and element heat fluxes. Pressure drops in fluid passages may be computed as an option. User instructions and sample problems are presented in appendixes.

Thornton, E. A.↗
NASA NTRS1980

Testing of turbulent seals for rotodynamic coefficients

A test program developed for dynamic testing of straight and convergent-tapered seals, with the capability of separately determining both direct and cross-coupled stiffness, damping, and added mass coefficients is described. The test apparatus causes the seal journal to execute small-eccentricity centered circular orbits within its bearings. Dynamic measurements are made and recorded of the seal-displacement-vector components, and of the pressure field. The pressure field is integrated to yield seal reaction force components. The displacement and force vector components are analyzed via a generalized Newton-Raphson procedure to yield the desired seal dynamic coefficients. Representative test data are provided and discussed.

Childs, D. W.↗
NASA NTRS1979

A general algorithm for the solution of Kepler's equation for elliptic orbits

An efficient algorithm is presented for the solution of Kepler's equation f(E)=E-M-e sin E=0, where e is the eccentricity, M the mean anomaly and E the eccentric anomaly. This algorithm is based on simple initial approximations that are cubics in M, and an iterative scheme that is a slight generalization of the Newton-Raphson method. Extensive testing of this algorithm has been performed on the UNIVAC 1108 computer. Solutions for 20,000 pairs of values of e and M show that for single precision, 42.0% of the cases require one iteration, 57.8% two and 0.2% three. For double precision one additional iteration is required.

Ng, E. W.↗
NASA NTRS1979

NLSCIDNT user's guide maximum likehood parameter identification computer program with nonlinear rotorcraft model

A nonlinear, maximum likelihood, parameter identification computer program (NLSCIDNT) is described which evaluates rotorcraft stability and control coefficients from flight test data. The optimal estimates of the parameters (stability and control coefficients) are determined (identified) by minimizing the negative log likelihood cost function. The minimization technique is the Levenberg-Marquardt method, which behaves like the steepest descent method when it is far from the minimum and behaves like the modified Newton-Raphson method when it is nearer the minimum. Twenty-one states and 40 measurement variables are modeled, and any subset may be selected. States which are not integrated may be fixed at an input value, or time history data may be substituted for the state in the equations of motion. Any aerodynamic coefficient may be expressed as a nonlinear polynomial function of selected 'expansion variables'.

Source record↗