Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nickel oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Thermogravimetric study of the reduction of oxides of nickel and chromium

The controlled hydrogen, carbon, and hydrogen-carbon reductions of the oxides of nickel and chromium were evaluated by thermogravimetric means. The materials studied were nickel (nickelous) oxide (NiO) and chromic sesquioxide (Cr2O3), mixed NiO-Cr2O3, and oxidized nickel - 20-percent chromium (Ni-20Cr). NiO was effectively reduced by all three atmospheres, Cr2O3 only by hydrogen-carbon, NiO-Cr2O3 by hydrogen and hydrogen-carbon, and oxidized Ni-20Cr by hydrogen and hydrogen-carbon and to a considerable extent by carbon alone. The results suggest that the presence of nickel promotes the reduction of Cr2O3. However, no definite explanation could be reached for the effectiveness of the hydrogen-carbon reduction of Cr2O3.

Herbell, T. P.↗
DOE OSTI2023

Influence of Single-Crystalline Morphology on the Electrochemical Behavior of High-Nickel Layered Oxide Cathodes

High-Nickel layered oxides are being pursued for their high specific capacities. With increasing nickel content, the layered oxides also suffer from structural and morphological instabilities, which degrade the electrochemical performance. Single-crystalline morphology presents an attractive solution to these problems, simultaneously reducing surface area available for parasitic reactions and preventing electrolyte penetration into the bulk with the removal of grain boundaries. Single-crystal cathodes have already shown promising results with NMC composition cathodes, but there are still gaps in the fundamental understanding of how single-crystalline morphology alters electrochemical behavior. We attempt to fill some of these gaps by studying in detail the electrochemical operation of polycrystalline and single-crystalline LiNiO 2 (LNO). Single-crystal LNO is prepared through a molten salt method yielding high-quality, distinct crystals with comparable lattice chemistry to polycrystalline LNO. The single-crystal LNO achieves far greater stability during long-term cycling, reaching 500 cycles with 82.5% capacity retention. Interestingly, the single-crystalline LNO also displays superior rate performance, delivering 157 mA h g −1 at 10C discharge rate. Investigation of the phase evolution behavior during cycling strongly suggests that the absence of grain boundaries in single-crystalline LNO is responsible for the superior performance.

25 ENERGY STORAGE↗
DOE OSTI2021

A Cobalt– and Manganese–Free High–Nickel Layered Oxide Cathode for Long–Life, Safer Lithium–Ion Batteries

High-nickel LiNi 1–x–y Mn x Co y O 2 and LiNi 1–x–y Co x Al y O 2 cathodes are receiving growing attention due to the burgeoning demands on high-energy-density lithium-ion batteries. The presence of both cobalt and manganese in them, however, triggers multiple issues, including high cost, high toxicity, rapid surface deterioration, and severe transition-metal dissolution. Herein, a Co- and Mn-free ultrahigh-nickel LiNi 0.93 Al 0.05 Ti 0.01 Mg 0.01 O 2 (NATM) cathode that exhibits 82% capacity retention over 800 deep cycles in full cells, outperforming two representative high-Ni cathodes LiNi 0.94 Co 0.06 O 2 (NC, 52%) and LiNi 0.90 Mn 0.05 Co 0.05 O 2 (NMC, 60%) is presented. It is demonstrated that a titanium-enriched surface along with aluminum and magnesium as the stabilizing ions in NATM not only ameliorates unwanted side reactions with the electrolyte and structural disintegrity, but also mitigates transition-metal dissolution and active lithium loss on the graphite anode. As a result, the graphite anode paired with NATM displays an ultrathin (≈8 nm), monolayer anode-electrolyte interphase architecture after extensive cycling. Furthermore, NATM displays considerably enhanced thermal stability with an elevated exothermic temperature (213 °C for NATM vs 180 and 190 °C for NC and NMC, respectively) and remarkably reduced heat release. This work sheds light on rational compositional design to adopt ultrahigh-Ni cathodes in lithium-based batteries with low cost, long service life, and improved thermal stability.

25 ENERGY STORAGE↗
DOE OSTI2023

Enhanced Urea Oxidation Electrocatalytic Activity by Synergistic Cobalt and Nickel Mixed Oxides

In this study, exploring reactive and selective Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy conversion technologies. Herein, synergistic interactions in Ni/Co mixed oxides/hydroxides enhanced the UOR with low onset potential, fast reaction kinetics, and good selectivity against oxygen evolution reaction (OER). Our electrochemical measurements and theoretical calculations signified the collaborative interaction of Ni/Co mixed oxide/hydroxide heterostructures to enhance UOR activity. Our results showed that Ni 3+ species, formed at high anodic potential, produced a high anodic current primarily from unwanted OER. Instead, the Ni/Co heterostructures with dominant Ni 2+ and Co 3+ species remained stable at low anodic potential and exhibited anodic current exclusively attributed to UOR. This work highlights the importance of tuning valence charges for designing high-performance and selective UOR electrocatalysts to benefit the environmental remediation of urea runoff and enable urea electrolysis for hydrogen production by replacing conventional OER with UOR at the anode.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Formation and Detriments of Residual Alkaline Compounds on High-Nickel Layered Oxide Cathodes

High-nickel layered oxides LiNi x M 1-x O 2 (x ≥ 0.9) have emerged as promising cathode materials for automotive batteries due to their high energy density and lower cost. However, the formation and accumulation of surface alkaline compounds during storage hinder their mass production and commercialization. Here, in this study, a validated chemical method is employed to deconvolute and quantify the evolution of each residual lithium compound in four representative cathodes during ambient-air storage, viz., LiNiO 2 (LNO), LiNi 0.95 Co 0.05 O 2 (NC), LiNi 0.95 Mn 0.05 O 2 (NM), and LiNi 0.95 Al 0.05 O 2 (NA). Furthermore, the activation energy of the reaction between water and the cathode is determined by measuring the leached LiOH concentration at various temperatures. While residual lithium and time-of-flight secondary-ion mass spectrometry measurements collectively reveal that the air stability overall follows the trend of NM > NA ≈ NC > LNO, the aged NM exhibits the highest charge-transfer resistance and the worst electrochemical performance among the cathodes. In situ, X-ray diffraction and scanning transmission electron microscopy unveil that the aged NM is plagued by a large area of resistive spinel-like M 3–x Li x O 4 phases, leading to aggravated particle reaction heterogeneity. Finally, a one-step recalcination method is demonstrated effective in fully restoring the degraded cathodes. This work provides insights into overcoming air sensitivity issues of high-Ni cathodes.

(S)TEM↗
DOE OSTI2025

Delineating the Factors Impacting the Electrochemical Behavior of Single-Crystal High-Nickel Layered Oxide Cathodes

High-nickel (Ni) (≥80%) single-crystal LiNi 1-x-y Mn x Co y O 2 (NMCs) have garnered recent interest as cathodes in lithium (Li)-ion batteries (LIBs). However, capacity fade at high voltages, particularly after the onset of the H2–H3 phase transition, hampers their viability. In this study, single-crystal LiNi 0.8 Mn x Co 0.2-x O 2 (x = 0.2, 0.1, 0) are synthesized and tested in LiPF 6 in ethyl methyl carbonate-based electrolytes, with and without monofluoroethylene carbonate and LiF 2 PO 2 additives, to clarify the effects of Co/Mn ratio and surface stabilization on high-voltage cycling degradation. By imposing a kinetic barrier to the accessible H2–H3 capacity, surface reconstruction is identified as the primary driver of high-voltage capacity loss, being greater in the Co-free cathode and in the absence of fluorinated electrolyte components. This is attributed to a synergy between increased mechanical stress due to worsened bulk and interfacial H2–H3 kinetics and decreased interfacial stability due to the poor passivating capability of the electrolyte. Here, the findings highlight the importance of limiting cathode impedance growth during high-voltage cycling, which can be achieved by tuning bulk dopants and electrolyte chemistry.

25 ENERGY STORAGE↗
DOE OSTI2024

LDRD poster - Identifying the speciation of salt-based actinides in the presence of contaminants

Molten salt reactors (MSRs) are among the most promising Generation IV nuclear reactors. The salts used in these reactors exhibit a high affinity for moisture and oxygen, and heating does not eliminate the oxides that are formed. Additionally, due to the high operating temperatures, reactor parts experience pronounced corrosion, and the resulting corrosion products integrate into the fuel salt system. It is hypothesized that the speciation of f-elements in molten salts would change in the presence of oxides and corrosion products. These changes in local structure can alter the rheological properties, which are critical to the operational and safety parameters of the reactors. Therefore, an in-depth understanding of how corrosion products influence lanthanide/actinide speciation is crucial. To test this hypothesis, lanthanides (as surrogates for actinides) and actinide chlorides were mixed with oxides (such as nickel oxide and lithium oxide) and/or corrosion products (e.g., nickel chloride) and reacted in molten salts. The resulting phases were analyzed using techniques such as powder X-ray diffraction, Raman spectroscopy, UV-Visible spectroscopy, and nuclear magnetic resonance spectroscopy. In the presence of oxides, due to the high oxophilicity of f-elements, these elements capture oxygen from the oxides, forming lanthanide/actinide oxide or oxychloride phases. Specifically, with cerium chloride, the introduction of lithium oxide to the formation of various final products depending on the oxide concentration. At lower oxide concentrations, cerium oxychloride (CeOCl) in the +3 oxidation state was observed, while an increase in the oxide concentration led to the formation of cerium dioxide (CeO2), where cerium is in the +4 oxidation state. In contrast, with nickel oxide, CeOCl formation was consistently observed, regardless of the oxide concentration. This project successfully determined that the speciation of f-elements change in the presence of oxides and different oxides in molten salts result in different final products. When the influence of nickel chloride was examined, changes in f-element speciation were not observed. However, it reacted with lithium chloride to generate a lithium-nickel-chloride (Li6NiCl8) phase, which was also observed when nickel oxide was reacted. Computational models were developed to simulate the phases anticipated under experimental conditions.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
NASA NTRS2018

Effect of Additives: Gamma-Ray Sensors Based on Ionizing Organic Nanocomposites

We have developed ionizing organic-based composites which have demonstrated great promise for radiation sensing. Nickel oxide has been proven as an active material for detecting high energy radiation. The oxidation state of unusual oxides such as nickel oxide in nanocomposites of ionizing organics changes much faster than thin film or bulk, and hence increases the sensitivity for radiation sensing. The resistivity of the oxide composite increases following sequential irradiation processes because of the decrease in holes' concentration. In this paper, we will present the effect of additional oxidizing agent on the morphology, processing and sensing of gamma-rays by oxides - urea based nanocomposites. It was observed that addition of MnO2 decreases the sensitivity. However, it recovers to original properties after irradiation much faster than undoped composites.

Vishall Dayal↗
DOE OSTI2023

Insights into Active Sites and Mechanisms of Benzyl Alcohol Oxidation on Nickel–Iron Oxyhydroxide Electrodes

The electrochemical oxidation of bio-derived molecules has recently garnered interest for its potential in opening electrified synthetic pathways toward value-added products. Herein, we investigate the electrochemical conversion of benzyl alcohol (BA) to benzaldehyde and benzoate on nickel–iron (Fe ~ 7–18%) electrodes as a model system to understand reaction mechanisms and environmental conditions that can transform these molecules. Our results indicate a strong correlation between benzyl alcohol oxidation (BAO) onset potentials and Ni(II/III) redox peak positions, highlighting the potential role that lower oxidation states of nickel, i.e., Ni 3+ , can play in BAO catalysis. Our work on the Ni 2+/3+ system complements mechanisms that involve higher oxidation states of Ni as reported by others. We note that the Ni redox position and thus BAO onset is impacted by Fe incorporation during electrochemistry from unpurified electrolytes, which can resemble standard reactor operating conditions. We perform a systematic computational investigation into BAO and provide density functional theory (DFT) insights into how the redox mechanism has been such a prominent focus of alcohol oxidations. This includes the mode of BA adsorption and the nature of the adsorption site; upon conversion of the Ni 2+ surface to active Ni 3+ via hydroxyl deprotonation, BAO is thermodynamically downhill. Our DFT study also introduces the possibility of a vacancy-driven mechanism, though expected to be less prevalent during catalysis than the redox mechanism for a Ni 3+ surface. Through the systematic investigation of experimental reaction conditions and computational free energy thermodynamics, we have gained valuable insights into BAO reaction mechanisms that inform catalytic activity. Our study opens avenues for further design and development of catalyst active sites for the oxidation of related organic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cobalt-free, high-nickel layered oxide cathodes for lithium-ion batteries: Progress, challenges, and perspectives

High-nickel layered oxides are enabling extraordinary growth of electric vehicles market due to its high energy density. Nonetheless, leading battery manufacturers are trying to cut down the manufacturing costs further by eliminating the dependency on cobalt in cathode materials. In this perspective, we explore several aspects that need to be considered to develop cobalt-free high-Ni layered oxides by reviewing the fundamental properties of LiNiO2. Furthermore, critical key factors for exploring alternative dopants and substituents are discussed for designing stable and inexpensive Co-free high-Ni layered oxides from a viewpoint of materials science and electrochemistry. Lastly, a perspective on the future research direction on Co-free high-Ni layered oxides are highlighted with respect to practical considerations.

25 ENERGY STORAGE↗
NASA NTRS1993

Applications of x ray absorption fine structure to the in situ study of the effect of cobalt in nickel hydrous oxide electrodes for fuel cells and rechargeable batteries

Electronic and structural aspects of composite nickel-cobalt hydrous oxides have been examined in alkaline solutions using in situ X-ray absorption fine structure (XAFS). The results obtained have indicated that cobalt in this material is present as cobaltic ions regardless of the oxidation state of nickel in the lattice. Furthermore, careful analysis of the Co K-edge Extended X-ray absorption fine structure data reveals that the co-electrodeposition procedure generates a single phase, mixed metal hydrous oxide, in which cobaltic ions occupy nickel sites in the NiO2 sheet-like layers and not two intermixed phases each consisting of a single metal hydrous oxide.

Kim, Sunghyun↗
DOE OSTI2024

Factors Influencing Gas Evolution from High‐Nickel Layered Oxide Cathodes in Lithium‐Based Batteries

Abstract Gas evolution from high‐nickel layered oxide cathodes (>90% Ni) remains a major issue for their practical application. Gaseous species, such as CO 2 , O 2 , and CO, that are evolved at high states of charge (SOC) worsen the overall safety of batteries, as pressure build‐up within the cell may lead to cell rupture. Since these gasses are produced during cathode degradation, tracking the formation of gasses is also important in diagnosing cathode failure. Online electrochemical mass spectrometry (OEMS) is a powerful in situ technique to study gas evolution from the cathode during high‐voltage charge. However, the differences in the OEMS experimental setups between different groups make it challenging to compare results between groups. In this perspective, the various factors that influence gas evolution based on the OEMS results collected in this group are presented. The focus is on the conditions that lead to gas release, with a particular emphasis on reactive oxygen formation and subsequent chemical reactions with the electrolyte. Promising strategies, such as electrolytes, compositional tuning, and surface coatings that are effective at suppressing gas evolution from the cathode are highlighted. Critical insights into mitigating cathode degradation and gas evolution are provided to guide the development of safer, high‐energy batteries.

Chemistry↗
NASA NTRS1976

Thermogravimetric study of reduction of oxides present in oxidized nickel-base alloy powders

Carbon, hydrogen, and hydrogen plus carbon reduction of three oxidized nickel-base alloy powders (a solid solution strengthened alloy both with and without the gamma prime formers aluminum and titanium and the solid solution strengthened alloy NiCrAlY) were evaluated by thermogravimetry. Hydrogen and hydrogen plus carbon were completely effective in reducing an alloy containing chromium, columbium, tantalum, molybdenum, and tungsten. However, with aluminum and titanium present the reduction was limited to a weight loss of about 81 percent. Carbon alone was not effective in reducing any of the alloys, and none of the reducing conditions were effective for use with NiCrAlY.

Herbell, T. P.↗
DOE OSTI2021

Electrolyte Regulating toward Stabilization of Cobalt-Free Ultrahigh-Nickel Layered Oxide Cathode in Lithium-Ion Batteries

Cobalt (Co)-free ultrahigh-nickel (Ni) layered oxides exhibit a double-edged competitive advantages in reducing the cathode cost and boosting the energy density, promising the sustainable development of batteries for electric vehicles. However, the increased Ni content, resultantly more highly oxidative Ni 4+ , potentially induces severe capacity fading due to the aggravated side reactions, limiting the practical applications. Here, we evaluate the compatibility of two localized high-concentration electrolytes (LHCEs) with LiNi 0.96 Mg 0.02 Ti 0.02 O 2 (NMT) cathode under a high charging voltage of 4.4 V in lithium ion batteries. The LHCE with EC additive enables the formation of stable interfacial layers on both NMT cathode and graphite anode, thus realizing a capacity retention of 97.2% over 200 cycles at 25 °C and high reversible capacities of ~180.2 and ~185.8 mAh g -1 , respectively, at 5C charge rate and 5C discharge rate. This study offers a promising approach to enable Co-free ultrahigh-Ni layered oxides for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Heuristics for Molten-Salt Synthesis of Single-Crystalline Ultrahigh-Nickel Layered Oxide Cathodes

In pursuit of Li-ion batteries with higher energy density, ultrahigh-nickel layered oxides are a leading candidate for next-generation cathode materials. Single-crystalline morphology offers a neat solution to the poor stability of ultrahigh-Ni cathodes; a lower active surface area mitigates electrolyte decomposition at high voltages, and the elimination of grain boundaries improves mechanical resilience and increases volumetric energy density. However, single-crystal cathodes possess their own challenges, several of which originate from synthesis at elevated temperatures meant to induce grain growth. Molten-salt synthesis is an alternative method for obtaining single crystals, accelerating grain growth through the presence of a molten flux without the need for increased temperature. Herein, we offer heuristic guidelines for molten-salt synthesis, discussing key factors for designing reaction mixtures and the necessary exploratory research for novel molten salt/cathode systems. Here, the influence of different salts and synthesis conditions on the morphology and properties of single-crystal LiNiO 2 is presented. It is found that oxidative salts, such as Li 2 O 2 and LiNO 3 , are crucial to supplementing dissolution of gaseous oxygen into the molten phase. Through these discussions, this work aims to provide a set of overarching principles for obtaining higher-quality single-crystal layered oxide cathodes and engender more rigorous and impactful investigation into their fundamental nature and applications.

25 ENERGY STORAGE↗