Search NASA⌕ Search

SEARCH · Search NASA

Results for “Novel Electrical Insulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development of Li–S Battery Cells with High Energy Density and Long Cycling Life

Lithium–sulfur (Li–S) batteries are considered one of the most promising next-generation energy storage technologies for electric vehicles, owing to their high energy density (up to three times greater than current lithium-ion batteries) and the low cost of sulfur (approximately 100 times cheaper than conventional cobalt oxide). However, several challenges hinder their commercial viability, including the electronically and ionically insulating nature of sulfur, polysulfide dissolution, and lithium dendrite growth. These issues significantly limit battery energy density and cycle life and must be addressed to enable successful commercialization. Current strategies involving porous carbon structures, additives, and electrocatalyst engineering have not fully resolved the polysulfide dissolution problem. While polysulfide-free cathode materials offer a promising solution, they often suffer from low sulfur content, leading to reduced discharge capacity and sluggish reaction kinetics. To overcome these limitations, we have developed novel soluble-polysulfide-free sulfur cathode active materials with a high sulfur content (>50 wt%). By integrating these cathodes with functional binders, optimized electrolyte formulations, and refined electrode fabrication techniques, we demonstrate Li–S batteries with both high energy density and long cycle life. This advancement brings the realization of low-cost, high-energy Li–S batteries significantly closer to practical application.

25 ENERGY STORAGE↗
DOE OSTI2020

Intrinsic thermal interfacial resistance measurement in bonded metal–polymer foils

Heat conduction through bonded metal–polymer interfaces often limits the overall heat transfer in electronic packaging, batteries, and heat recovery systems. To design the thermal circuit in such systems, it is essential to measure the thermal interfacial resistance (TIR) across ~1 µm to 100 µm junctions. Previously reported TIR of metal–polymer junctions utilize ASTM E1530-based two-block systems that measure the TIR by applying pressure across the interface through external heating and cooling blocks. Here, we report a novel modification of the ASTM-E1530 technique that employs integrated heaters and sensors to provide an intrinsic TIR measurement of an adhesively bonded metal–polymer junction. We design the measurement technique using finite element simulations to either passively suppress or actively compensate the lateral heat diffusion through the polymer, which can minimize the systematic error to ≲5%. Through proof-of-concept experiments, we report the TIR of metal–polymer interfaces made from DuPont’s Pyralux double-side copper-clad laminates, commonly used in flexible printed circuit boards. Our TIR measurement errors are <10%. We highlight additional sources of errors due to non-idealities in the experiment and discuss possible ways to overcome them. Our measurement technique is also applicable to interfaces that are electrically insulating such as adhesively joined metal–metal junctions and sputter-coated or welded metal–polymer junctions. Altogether, the technique is capable of measuring TIR ≳10 –5 m 2 KW –1 in bonded metal–polymer foils and can be tailored for in situ measurements in flexible electronics, circuit packaging, and other hybrid metal–polymer systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Flexible Fabric-Based IDC Sensors for Conformal Curved Surface Applications

Interdigital capacitor (IDC) sensors are attractive in-situ sensors that can be used to measure permittivity variations in materials. Such sensors could be powerful enablers for cable insulation aging detection. Since insulation aging is correlated with a change in its material permittivity an IDC can measure that change via its measured capacitance. A new thin, flexible fabric-based IDC sensor is introduced for application on conformal curved surfaces such as an electrical cable surface. A multielectrode IDC and its backplane were fabricated using conductive copper polyester taffeta fabrics that were adhesively bonded to nonconductive polyester fabric. The sensor because of its soft flexible structure eliminates the problem of sensor conductor damage which is common for printed circuit board (PCB) type sensors when conformed to the surface of a cable. It also significantly reduces the airgap between the electrodes and the surface that they must contact in order to measure the capacitance. Airgap reduction and consistency are important in order to accurately predict permittivity variations in cable insulation material due to aging. Both PCB-based sensors and the new fabric-based sensors were built and tested on unaged cables and cables that underwent accelerated aging. Results demonstrate the proposed advantages of the novel fabric-based IDC sensor.

interdigital capacitor sensor, IDC, NDE, PCB senso↗
DOE OSTI2025

Driven Majorana modes: A route to synthetic $p_x +ip_y$ superconductivity

We propose a protocol to realize synthetic $p_x +ip_y$ superconductors in one-dimensional topological systems that host Majorana fermions. By periodically driving a localized Majorana mode across the system, our protocol realizes a topological pumping of Majorana fermions, analogous to the adiabatic Thouless pumping of electrical charges. Importantly, similar to the realization of a Chern insulator through Thouless pumping, we show that pumping of Majorana zero modes could lead to a $p_x +ip_y$ superconductor in the two dimensions of space and synthetic time. The Floquet theory is employed to map the driven one-dimensional system to a two-dimensional synthetic system by considering frequency as a new dimension. We demonstrate such Floquet $p_x +ip_y$ superconductors using the Kitaev $p$-wave superconductor chain, a prototypical 1D topological system, as well as its more realistic realization in the 1D Kondo lattice model as examples. We further show the appearance of Majorana $π$ mode at the Floquet zone boundary in an intermediate drive frequency region. Our work suggests a driven magnetic spiral coupled to a superconductor as a promising platform for the realization of novel topological superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

STRUCTURAL STABILITY OF MAGNETIC TUNNEL JUNCTION BASED MOLECULAR SPINTRONICS DEVICES (MTJMSD)

Harnessing the exotic properties of molecular level nanostructures to produce novel sensors, metamaterials, and futuristic computer devices can be technologically transformative. In addition, connecting the molecular nanostructures to ferromagnetic electrodes bring the unprecedented opportunity of making spin property based molecular devices. We have demonstrated that magnetic tunnel junction based molecular spintronics device (MTJMSD) approach to address numerous technological hurdles that have been inhibiting this field for decades. MTJMSD approach is based on producing a capacitor like a testbed where two metal electrodes are separated by an ultrathin insulator and subsequently bridging the molecule nanostructure across the insulator to transform a capacitor into a molecular device. Our prior work showed that MTJMSDs produced extremely intriguing phenomenon such as room temperature current suppression by six orders, spin photovoltaic effect, and evolution of new forms of magnetic metamaterials arising due to the interaction of the magnetic a molecule with two ferromagnetic thin films. However, making robust and reproducible electrical connections with exotic molecules with ferromagnetic electrodes is full of challenges and requires attention to MTJMSD structural stability. This paper focuses on MTJMSD stability by describing the overall fabrication protocol and the associated potential threat to reliability. MTJMSD is based on microfabrication methods such as (a) photolithography for patterning the ferromagnetic electrodes, (b) sputtering of metallic thin films and insulator, and (c) at the end electrochemical process for bridging the molecules between two ferromagnetic films separated by ~ 2nm insulating gap.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Durability Evaluation of Advanced Fenestration Technologies

In the U.S., more than 40% of primary energy and 70% of electricity is consumed in residential and commercial buildings, resulting in annual energy costs of more than $430 billion. Approximately 35% of this consumption can be attributed to losses through the building envelope, of which windows are currently the weakest link. Multiple technologies are under development to improve this performance. This includes dynamic and photovoltaic glazing as well as emerging highly insulating technologies including vacuum insulating glass (VIG), aerogels and thin-glass based multi-pane configurations. While windows are specified based on expected performance as installed, the energy savings realized by high performance windows are delivered over time. This makes it critical to understand and maximize the durability of high-performance windows to ensure those projected energy savings are delivered. Present methods for evaluating durability are based on existing technologies. These methods may not apply or be adequate for newer emerging technologies which often present novel failure mechanisms that need to be understood and evaluated differently. In this presentation, we will discuss our efforts to define appropriate methods to improve the evaluation of many existing technologies as well as evaluate the durability of emerging window technologies. This work results from the combination of an extensive review of various international standards as well as existing scientific literature. In addition, input was gathered from multiple industry stakeholders regarding present practice as well as feedback on proposed improvements to existing methods. Here we will share these findings and present proposed improvements to developing and existing durability evaluation protocols.

building envelope↗
DOE OSTI2025

Recent trends in all-organic polymer dielectrics for high-temperature electrostatic energy storage capacitors

Electrostatic energy storage (EES) capacitors are critical for renewable energy and high-power systems, driving the search for dielectric materials that combine superior electrical insulation, mechanical flexibility, low density, cost-effectiveness, and processability. Polymer-based dielectrics have emerged as leading candidates, particularly for high electric field applications. However, conventional polymers often fail to meet the demands of high-temperature environments due to increased electrical conductivity and reduced discharged energy density at elevated temperatures, resulting in energy loss and reduced performance. High glass transition temperature (T g) polymers show promise but require further optimization to enhance their energy storage capabilities under thermal and electrical stress. This review provides a comprehensive update on recent advancements in high-T g polymer-based dielectrics for EES capacitors, focusing on both intrinsic polymers and all-organic composites. It outlines key design principles, critical performance parameters, and innovative strategies—such as nanofiller doping, layered architectures, physical blending, and chemical crosslinking—to improve electrical, thermal, and mechanical properties. The review also highlights emerging trends, including the integration of machine learning algorithms to explore novel polymer structures and expand the chemical design space. By bridging the gap between academic research and industrial application, this review aims to accelerate the development of next-generation dielectric materials capable of balancing multiple performance metrics for high-temperature EES capacitors.

Xie, Zongliang↗
DOE OSTI2024

Insulator‐to‐Metal Transition and Isotropic Gigantic Magnetoresistance in Layered Magnetic Semiconductors

Magnetotransport, the response of electrical conduction to external magnetic field, acts as an important tool to reveal fundamental concepts behind exotic phenomena and plays a key role in enabling spintronic applications. Magnetotransport is generally sensitive to magnetic field orientations. In contrast, efficient and isotropic modulation of electronic transport, which is useful in technology applications such as omnidirectional sensing, is rarely seen, especially for pristine crystals. Here a strategy is proposed to realize extremely strong modulation of electron conduction by magnetic field which is independent of field direction. GdPS, a layered antiferromagnetic semiconductor with resistivity anisotropies, supports a field-driven insulator-to-metal transition with a paradoxically isotropic gigantic negative magnetoresistance insensitive to magnetic field orientations. This isotropic magnetoresistance originates from the combined effects of a near-zero spin–orbit coupling of Gd 3+ -based half-filling ƒ-electron system and the strong on-site f – d exchange coupling in Gd atoms. These results not only provide a novel material system with extraordinary magnetotransport that offers a missing block for antiferromagnet-based ultrafast and efficient spintronic devices, but also demonstrate the key ingredients for designing magnetic materials with desired transport properties for advanced functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Optimizing Insulation Design for Transformers in Medium Voltage Power Conversion Systems

Medium-frequency transformers (MFTs) play a crucial role in medium-voltage (MV) solidstate transformer (SST) systems, particularly in extreme fast charging applications. Achieving partial discharge (PD)-free operation while maintaining high power density is a significant challenge due to the high electric field (E-field) stresses inherent in MV applications. This dissertation focuses on the insulation design and optimization of MFTs used in both the main power electronics circuits and auxiliary power supplies. The study begins with an overview of insulation testing methodologies, including high potential tests, basic insulation level tests, and PD tests, which are critical for evaluating MFT insulation reliability. Given the importance of PD-free operation for long-term reliability, particular emphasis is placed on understanding PD mechanisms, including void, corona, and surface discharge, and their mitigation strategies. A high voltage isolated auxiliary power supply is then introduced, utilizing a gapped transformer encapsulated in silicone gel. This design achieves PD-free insulation up to 18 kV RMS while maintaining low coupling capacitance to minimize common-mode current. The proposed solution ensures reliable operation in MV environments and offers a scalable approach for auxiliary power in cascaded SST architectures. To improve MFT insulation in main power conversion circuits, a novel structure is developed using polypropylene sheets and potting compounds to create a void-free air gap, effectively mitigating E-field intensity. A prototype transformer with this insulation structure is built and achieves PD-free operation up to 30 kV RMS. This design is experimentally validated in a resonant converter operating at 46 kW, demonstrating its feasibility for MV SST applications. Further optimization is implemented to enhance MFT performance for dual-active-bridge(DAB) converters by integrating a semiconductive shielding layer within the insulation structure. This shielding layer improves the magnetic coupling coefficient while effectively confining the E-field within high insulation materials, thereby reducing eddy current losses. The optimized MFT achieves PD-free operation at 12.6 kV RMS and is successfully tested in a DAB converter operating at 43 kW, which meets the insulation requirements for a 13.2 kV SST system. This dissertation advances MFT insulation design by introducing and experimentally validating novel approaches that improve high voltage insulation while optimizing magnetic coupling and manufacturability. The proposed insulation structures enable PD-free operation while minimizing insulation material usage and simplifying assembly, making them ideal for high power, high voltage applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Manipulating topological properties in Bi 2 Se 3 / BiSe /transition metal dichalcogenide heterostructures with interface charge transfer

Heterostructures of topological insulator Bi 2 Se 3 on transition metal dichalcogenides (TMDCs) offer a new materials platform for studying novel quantum states by exploiting the interplay among topological orders, charge orders and magnetic orders. Here, the diverse interface attributes, such as material combination, charge re-arrangement, defect and strain, can be utilized to manipulate the quantum properties of this class of materials. Recent experiments of Bi 2 Se 3 /NbSe 2 heterostructures show signatures of strong Rashba band splitting due to the presence of a BiSe buffer layer, but the atomic level mechanism is not fully understood. We conduct first-principles studies of the Bi 2 Se3/BiSe/TMDC heterostructures with five different TMDC substrates (1T phase VSe 2 , MoSe 2 , TiSe 2 , and 2H phase NbSe 2 , MoSe 2 ). We find significant charge transfer at both BiSe/TMDC and Bi 2 Se 3 /BiSe interfaces driven by the work function difference, which stabilizes the BiSe layer as an electron donor and creates interface dipole. The electric field of the interface dipole breaks the inversion symmetry in the Bi 2 Se 3 layer, leading to the giant Rashba band splitting in two quintuple layers and the recovery of the Dirac point in three quintuple layers, with the latter otherwise only occurring in thicker samples with at least six Bi 2 Se 3 quintuple layers. Besides, we find that strain can significantly affect the charge transfer at the interfaces. Our study presents a promising avenue for tuning topological properties in heterostructures of two-dimensional materials, with potential applications in quantum devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Giant Domain Wall Conductivity in Self‐Assembled BiFeO 3 Nanocrystals

Abstract Ever‐increasing demand on electronic devices with ultrahigh‐density non‐volatile data storage has attracted great interest in novel ferroelectric memories based on conductive ferroelectric domain walls. Embedded in an insulating material, ferroelectric domain walls have the capability of being (re)created, displaced, erased, and altered in their spatial configurations and electronic characteristics. However, the domain wall conductivities are in most cases not yet sufficiently high to ensure the current density required to drive read‐out circuits operating at high speeds. In this work, a giant domain wall current (>10 µA) of a single charged domain wall is obtained through conductive atomic force microscopy with a bias field of 4 V. This is achieved in self‐assembled BiFeO 3 nanocrystals grown by sol‐gel method on Nb‐doped SrTiO 3 substrates. Local configurations of domains and domain wall types are studied using vector piezoresponse force microscopy and high‐resolution transmission electronic microscopy. The enhancement of the wall current is shown to be due to the formation of conducting pathways of charged defects accumulated along domain walls and traversing the nanocrystals. The diverse domain walls can be manipulated by electric field in a perpendicular architecture. The perpendicular array structure of BiFeO 3 nanocrystals should have great potentials for developing perpendicular nanoelectronic prototypes.

Liu, Lisha↗
DOE OSTI2023

Ultrafast snapshots of terahertz electric potentials across ring-shaped quantum barriers

Probing the time evolution of the terahertz electric field within subwavelength dimensions plays a crucial role in observing the nanoscale lightwave interactions with fundamental excitations in condensed-matter systems and in artificial structures, such as metamaterials. Here, we propose a novel probing method for measuring terahertz electric potentials across nanogaps using a combination of optical and terahertz pulse excitations. To achieve this, we employ ring-shaped nanogaps that enclose a metallic island, allowing us to capture tunneling charges when subjected to terahertz electromagnetic pulse illumination. By controlling and manipulating the terahertz tunneling charges through a focused optical gate pulse, we can obtain the terahertz potential strength as a function of spatial coordinates and time delays between pulses. To accurately quantify the time evolution of terahertz electric potential across quantum barriers, we carefully calibrate the recorded nonlinear tunneling current. Its on-resonance and off-resonance behaviors are also discussed, providing valuable insights into the antenna’s characteristics and performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Metal–insulator transition tuned by oxygen vacancy migration across TiO2/VO2 interface

Abstract Oxygen defects are essential building blocks for designing functional oxides with remarkable properties, ranging from electrical and ionic conductivity to magnetism and ferroelectricity. Oxygen defects, despite being spatially localized, can profoundly alter global properties such as the crystal symmetry and electronic structure, thereby enabling emergent phenomena. In this work, we achieved tunable metal–insulator transitions (MIT) in oxide heterostructures by inducing interfacial oxygen vacancy migration. We chose the non-stoichiometric VO 2-δ as a model system due to its near room temperature MIT temperature. We found that depositing a TiO 2 capping layer on an epitaxial VO 2 thin film can effectively reduce the resistance of the insulating phase in VO 2 , yielding a significantly reduced R OFF /R ON ratio. We systematically studied the TiO 2 /VO 2 heterostructures by structural and transport measurements, X-ray photoelectron spectroscopy, and ab initio calculations and found that oxygen vacancy migration from TiO 2 to VO 2 is responsible for the suppression of the MIT. Our findings underscore the importance of the interfacial oxygen vacancy migration and redistribution in controlling the electronic structure and emergent functionality of the heterostructure, thereby providing a new approach to designing oxide heterostructures for novel ionotronics and neuromorphic-computing devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetization Dependent In-plane Anomalous Hall Effect in a Low-dimensional System

Anomalous Hall Effect (AHE) response in magnetic systems is typically proportional to an out-of-plane magnetization component because of the restriction imposed by system symmetries, which demands that the magnetization, applied electric field, and induced Hall current are mutually orthogonal to each other. Here, we report experimental realization of an unconventional form of AHE in a low-dimensional heterostructure, wherein the Hall response is not only proportional to the out-of-plane magnetization component but also to the in-plane magnetization component. By interfacing a low-symmetry topological semimetal (TaIrTe4) with the ferromagnetic insulator (Cr2Ge2Te6), we create a low-dimensional magnetic system, where only one mirror symmetry is preserved. We show that as long as the magnetization has a finite component in the mirror plane, this last mirror symmetry is broken, allowing the emergence of an AHE signal proportional to in-plane magnetization. Our experiments, conducted on multiple devices, reveal a gate-voltage-dependent AHE response, suggesting that the underlying mechanisms responsible for the Hall effect in our system can be tuned via electrostatic gating. A minimal microscopic model constrained by the symmetry of the heterostructure shows that both interfacial spin-orbit coupling and time-reversal symmetry breaking via the exchange interaction from magnetization are responsible for the emergence of the in-plane AHE. Our work highlights the importance of system symmetries and exchange interaction in low-dimensional heterostructures for designing novel and tunable Hall effects in layered quantum systems.

FOS: Physical sciences↗
DOE OSTI2022

Theory of optical axion electrodynamics and application to the Kerr effect in topological antiferromagnets

Abstract Emergent axion electrodynamics in magneto-electric media is expected to provide novel ways to detect and control material properties with electromagnetic fields. However, despite being studied intensively for over a decade, its theoretical understanding remains mostly confined to the static limit. Here, we introduce a theory of axion electrodynamics at general frequencies. We define a proper optical axion magneto-electric coupling through its relation to optical surface Hall conductivity and provide ways to calculate it in lattice systems. By employing our formulas, we show that axion electrodynamics can lead to a significant Kerr effect in thin-film antiferromagnets at wavelengths that are seemingly too long to resolve the spatial modulation of magnetism. We identify the wavelength scale above which the Kerr effect is suppressed. Our theory is particularly relevant to materials like MnBi 2 Te 4 , a topological antiferromagnet whose magneto-electric response is shown here to be dominated by the axion contribution even at optical frequencies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pareto Optimization of Oligomer Polarizability and Dipole Moment Using a Genetic Algorithm

High-performance electronic components are highly sought after in order to produce increasingly smaller and cheaper electronic devices. Drawing inspiration from inorganic dielectric materials, in which both polarizability and polarization contribute, organic materials can also maximize both. For a large set of small molecules drawn from PubChem, a Pareto-like front appears between the polarizability and dipole moment, indicating the presence of an apparent trade-off between these two properties. We tested this balance in π-conjugated materials by searching for novel conjugated hexamers with simultaneously large polar- izabilities and dipole moments with potential use for dielectric materials. Using a genetic algorithm (GA) screening technique in conjunction with an approximate density functional tight-binding method for property calculations, we were able to efficiently search chemical space for optimal hexamers. Given the scope of chemical space, using the GA technique saves considerable time and resources by speeding up molecular searches compared to a systematic search. Here, we also explored the underlying structure–function relationships, including sequence and monomer properties, that characterize large polarizability and dipole moment regimes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spreading resistance effects in tunneling spectroscopy of α–RuCl 3 and Ir 0.5 Ru 0.5 Cl 3

The Mott insulating state is the progenitor of many interesting quantum phases of matter including the famous high-temperature superconductors and quantum spin liquids. A recent candidate for novel spin liquid phenomena is α–RuCl 3 , a layered honeycomb Mott insulator whose electronic structure has been a source of mystery. In particular, scanning tunneling spectroscopy has indicated a Mott gap in α–RuCl 3 that is much lower than the 2-eV value observed in photoemission measurements. Here, we show that the origin of this discrepancy is a spreading resistance artifact associated with tunneling into highly resistive materials by comparing with prior experiments and numerical modeling. Furthermore, a similar phenomenon is also observed in a substitutional alloy, Ir 0.5 Ru 0.5 Cl 3 , that has a higher resistivity than the parent compound. While the tunneling measurements cannot be used to accurately measure the sample density of states for these materials, we can take advantage of the spreading resistance sensitivity to quantify the anisotropic resistivity of these layered materials and connect to previous macroscopic transport observations.

2-dimensional systems↗
DOE OSTI2023

Fundamental studies of thermal and electrical transport in microporous metal-organic frameworks

In this work, we established porous metal-organic frameworks (MOFs) as designer conductors of electrons and ions relevant to fundamental research and technological applications. MOFs are porous, crystalline materials composed of organic linkers and inorganic nodes. While most MOFs are insulating with respect to ionic and electronic charge carriers, a number of exceptions have been reported in recent years. Electrically conductive MOFs are highly attractive for applications including electrical energy storage, chemiresistive sensing, and optoelectronics because of their high surface areas and tunable chemical properties. Ion-conducting MOFs are desirable for the synthetically tunable size, shape, and polarity of their pore environments, allowing for the tailored development of solid state electrolytes for metal-ion batteries. We developed systematic strategies for the design of MOFs that conduct ions and electrons. For each objective, we leveraged the versatile chemistry of these materials to obtain frameworks with targeted properties towards electronic or ionic charge carriers. We studied the factors that govern electrical transport in MOFs in order to gain fundamental knowledge of this emerging class of materials. We took several approaches to tackle this problem from multiple angles. Namely, we synthesized and characterized new frameworks, investigated post-synthetic modifications to enhance conductivity, and correlated theory and experiment to uncover new mechanistic findings. These results, which put forth new design principles for conductive MOFs, move the field toward one of the DOE Basic Energy Sciences Grand Challenges: to “design and perfect atom- and energy-efficient synthesis of revolutionary new forms of matter with tailored properties.” In addition to investigating the movement of electrons in MOFs, we also studied the movement of other charged species in MOFs, such as protons, lithium, and magnesium. Proton-conducting frameworks could be appealing materials for solid state electrolytes in fuel cells. In addition, they contain crystallographically defined proton-conducting channels, in contrast with state-of-the-art polymer membranes such as Nafion, which are amorphous. Controlling pore size and polarity in MOFs can thus shed light on proton and other ion transport mechanisms, ultimately enabling the design of more advanced electrolyte materials and potentially novel electrical energy storage materials.

36 MATERIALS SCIENCE↗