Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Validation of numerical models for seismic fluid-structure-interaction analysis of nuclear, safety-related equipment

Seismic design, qualification, and risk assessment of nuclear safety-related vessels filled with liquid will have to consider the interaction between the vessel (tank), the contained liquid, and submerged components, if any. Seismic fluid-structure-interaction (FSI) analysis of nuclear vessels will rely on numerical models, which are required to be verified and validated. This study validates previously-verified numerical models using test data generated from earthquake-simulator experiments involving a cylindrical tank. Two solvers in LS-DYNA for FSI simulations are used for the numerical analysis: Arbitrary-Lagrangian-Eulerian (ALE) and Incompressible Computational Fluid Dynamics (ICFD). Numerical and test results are compared for responses critical to seismic design of advanced reactor vessels: hydrodynamic pressures on the tank wall, reactions at the support, and wave heights of the contained liquid. Analysis is performed for one-, two-, and three-directional seismic inputs with a range of intensity, and rocking motions. The accuracy of the numerical results and different methods for outputting wave heights are discussed. Recommendations for validation of seismic FSI numerical models of advanced reactors are provided. As a result, the validation exercise presented in this study is broadly applicable to cylindrical tanks, regardless of industry sector.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

NUMERICAL MODELING OF CATHODE CONTACT MATERIAL DENSIFICATION

Numerical modeling was used to simulate the constrained sintering process of the cathode contact layer during assembly of solid oxide fuel cells (SOFCs). A finite element model based on the continuum theory for sintering of porous bodies was developed and used to investigate candidate low-temperature cathode contact materials. Constitutive parameters for various contact materials under investigation were estimated from dilatometry screening tests, and the influence of processing time, processing temperature, initial grain size, and applied compressive stress on the free sintering response was predicted for selected candidate materials. The densification behavior and generated stresses within a 5-cell planar SOFC stack during sintering, high temperature operation, and room temperature shutdown were predicted. Insufficient constrained densification was observed in the stack at the proposed heat treatment, but beneficial effects of reduced grain size, compressive stack preload, and reduced thermal expansion coefficient on the contact layer densification and stresses were observed.

30 DIRECT ENERGY CONVERSION↗

Numerical modeling of an arcjet thruster

A numerical model of an arcjet thruster was developed and the results of calculations using this model are compared to the experimental data from a 30 kW arcjet using ammonia as a propellant. The model contains equations for the conservation of mass, radial, axial, and azimuthal momentum, energy, and the radial component of the magnetic field and provides a solution for three components of velocity, temperature, and the axial and radial current as a function of position in an axisymmetric flowfield. The model predicts 12 percent more specific impulse than the experiment when the mass flow and power input are constrained to the experimental values. A major conclusion of this study is that improved procedures for calculating transport properties are necessary if the accuracy of the model is to be improved.

Rhodes, Robert P.↗

Dynamics of the Antarctic Circumpolar Current. Evidence for Topographic Effects from Altimeter Data and Numerical Model Output

Geosat altimeter data and numerical model output are used to examine the circulation and dynamics of the Antarctic Circumpolar Current (ACC). The mean sea surface height across the ACC has been reconstructed from height variability measured by the altimeter, without assuming prior knowledge of the geoid. The results indicate locations for the Subantarctic and Polar Fronts which are consistent with in situ observations and indicate that the fronts are substantially steered by bathymetry. Detailed examination of spatial and temporal variability indicates a spatial decorrelation scale of 85 km and a temporal e-folding scale of 34 days. Empirical Orthogonal Function analysis suggests that the scales of motion are relatively short, occuring on 1000 km length-scales rather than basin or global scales. The momentum balance of the ACC has been investigated using output from the high resolution primitive equation model in combination with altimeter data. In the Semtner-Chervin quarter-degree general circulation model topographic form stress is the dominant process balancing the surface wind forcing. In stream coordinates, the dominant effect transporting momentum across the ACC is bibarmonic friction. Potential vorticity is considered on Montgomery streamlines in the model output and along surface streamlines in model and altimeter data. (AN)

Gille, Sarah T.↗

Foundation heat exchangers for residential ground source heat pump systems Numerical modeling and experimental validation

A new type of ground heat exchanger that utilizes the excavation often made for basements or foundations has been proposed as an alternative to conventional ground heat exchangers. This article describes a numerical model that can be used to size these foundation heat exchanger (FHX) systems. The numerical model is a two-dimensional finite-volume model that considers a wide variety of factors, such as soil freezing and evapotranspiration. The FHX numerical model is validated with one year of experimental data collected at an experimental house located near Oak Ridge, Tennessee. The model shows good agreement with the experimental data-heat pump entering fluid temperatures typically within 1 C (1.8 F) - with minor discrepancies due to approximations, such as constant moisture content throughout the year, uniform evapotranspiration over the seasons, and lack of ground shading in the model.

15 GEOTHERMAL ENERGY↗

Numerical Modeling of Propellant Boil-Off in a Cryogenic Storage Tank

A numerical model to predict boil-off of stored propellant in large spherical cryogenic tanks has been developed. Accurate prediction of tank boil-off rates for different thermal insulation systems was the goal of this collaboration effort. The Generalized Fluid System Simulation Program, integrating flow analysis and conjugate heat transfer for solving complex fluid system problems, was used to create the model. Calculation of tank boil-off rate requires simultaneous simulation of heat transfer processes among liquid propellant, vapor ullage space, and tank structure. The reference tank for the boil-off model was the 850,000 gallon liquid hydrogen tank at Launch Complex 39B (LC- 39B) at Kennedy Space Center, which is under study for future infrastructure improvements to support the Constellation program. The methodology employed in the numerical model was validated using a sub-scale model and tank. Experimental test data from a 1/15th scale version of the LC-39B tank using both liquid hydrogen and liquid nitrogen were used to anchor the analytical predictions of the sub-scale model. Favorable correlations between sub-scale model and experimental test data have provided confidence in full-scale tank boil-off predictions. These methods are now being used in the preliminary design for other cases including future launch vehicles

Majumdar, A. K.↗

n-Propylbenzene Droplet Combustion: Experiments and Numerical Modeling

n-Propylbenzene (PB, C9H12, 432K boiling point) is important as a constituent in surrogates for some transportation fuels but little is understood about its droplet burning characteristics. We present an experimental and numerical study of a fuel droplet burning under conditions where the sole means of gas transport is fuel evaporation at the droplet surface thereby creating a one-dimensional gas transport that is amenable to detailed numerical modeling. The one-dimensional gas transport that results is amenable to detailed numerical modeling. Initial droplet diameters (Do) ranged from 0.3 mm to about 5 mm to better understand the mechanisms that control burning over such a wide range of Do. For Do < 1 mm droplets were burned while anchored to 14 m SiC fibers within a sealed container in free-fall during which time the droplets were ignited by spark discharge and the burning process recorded by video cameras. Larger and free-floating droplets were studied in the spaced-based platform of the orbiting International Space Station for Do > 1.0 mm which provided unlimited times for experimental observation. Measurements of droplet, flame and soot shell diameters were made and are discussed in the presentation. The experimental results showed formation of optically thick soot clouds developing during burning that required a robust image analysis algorithm to enable measurement of droplet diameter. The measured droplet diameters were well predicted by a numerical model that included soot formation, a PB kinetic mechanism comprising 576 species and 27369 reactions, unsteady gas and liquid transport, variable properties and radiative transport. Flame diameters showed more variability compared to the simulations, depending on how the flame was defined (peak gas temperature and OH concentration). Droplets burned slower as Do was increased and the PB sooting propensity increased with Do. Flame extinction was observed for Do > 3.3 mm indicating a strong effect of radiation as Do was increased compared to the smaller droplet diameters examined where extinction was not experimentally observed. For the largest droplets examined the possibility that the observed extinction is indicative of a transition to cool flame burning is still under investigation.

Guo, Songtao↗

Interactive applications of satellite observations and mesoscale numerical models

The impact of numerical weather prediction (NWP) and satellite meteorology on operational weather forecasting has become overwhelming in the past few years. The paper looks toward the merger of these technologies in making short range 6-18 h forecasts through the use of mesoscale NWP models. A short-range (2-18 h) mesoscale forecast system envisioned for the near future is described that includes four components: hydrodynamic numerical models, large-scale and mesoscale; satellites, polar orbiting for high latitudes and geostationary for low latitudes; mesoclimatology, derived in large part from satellite data; and special-purpose simple models and empirical relations. It is important that the components of the forecast system be developed in parallel rather than in series if the system is to be completed within five years. There is enough evidence to substantiate the revolution in the mesoscale weather prediction in the next five years.

Kreitzberg, C. W.↗

Numerical modeling of groundwater flow in the Navajo sandstone aquifer at the Tuba city, Arizona, disposal site - 15167

A numerical model is being developed to describe groundwater flow in the Navajo Sandstone aquifer that underlies the US DOE Office of Legacy Management Tuba City disposal site that is located near Tuba City, Arizona. The site is a former uranium-ore processing mill that operated from 1956 until 1966. Resulting groundwater contamination extends approximately 457 meters (1,500 feet) off the site. The primary contaminants are nitrate, sulfate, and uranium. Onsite solid waste encapsulation was completed by 1990 and pump-and-treat groundwater remediation was implemented in 2002. A site conceptual model, along with an approach to numerically simulate groundwater flow and advective transport of contaminants at the site, is being developed. Numerical model calibration will address transient periods of active and inactive groundwater withdrawal during the remedial action. The calibrated model will be applied to forecast contaminant capture under the current and hypothetical groundwater extraction scenarios. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A process to verify numerical models for seismic fluid-structure interaction in advanced reactor vessels

Seismic design and qualification of a liquid-filled advanced nuclear reactor will have to account for fluid-structure interaction (FSI). Interaction between the tank, internal components, and contained liquid will rely on analysis of numerical models that must be verified and validated. Here this study demonstrates a verification process for models of a base-supported cylindrical tank by comparing numerical predictions and analytical solutions. The numerical models are consistent with the assumptions made to derive analytical solutions, namely, either a rigid or a linear elastic tank, ideal fluid, and small-amplitude, unidirectional, horizontal inputs. One software platform is used to illustrate the process. Seismic FSI analysis is performed using the Arbitrary Lagrangian-Eulerian (ALE) and Incompressible Computational Fluid Dynamics (ICFD) solvers in LS-DYNA. Reported responses are those used for design, including hydrodynamic pressures on the tank wall, shear forces and moments at the tank base, and wave heights of the contained liquid. The accuracy of the numerical results is discussed. The numerical models are verified for calculating the pressures on the tank wall and reactions at its base. Accurate simulation of wave action is challenging for both solvers. Recommendations for modeling, code development, and steps for verification are provided. Although focused on reactor vessels and one software platform, the verification process described herein is broadly applicable to liquid-filled vessels and other finite element codes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Supernova remnant revolution in an inhomogeneous medium. I - Numerical models

The first numerical simulations of supernova remnant evolution in an inhomogeneous gas are presented. Evolution in the lowest density substrate (the intercloud) is assumed to be spherically symmetric with a large intercloud filling factor and many dense regions (clouds) within the remnant; however, mass momentum and energy transfer between cloud and intercloud are included and the position and morphology of individual clouds tracked. Evolution is considered in several different models of the interstellar medium, both those in which the intercloud gas is diffuse (0.001 to 0.01/cu cm) and those in which it is relatively dense (n approximately 0.3/cu cm) under a variety of assumptions about the efficiency of thermal evaporation from the clouds into the intercloud medium.

Cowie, L. L.↗

IRAS high resolution studies and modeling of closely interacting galaxies. Galaxy collisions: Infrared observations and analysis of numerical models. UV spectroscopy of massive young stellar populations in interacting galaxies

The Final Technical Report covering the period from 15 Aug. 1989 to 14 Aug. 1991 is presented. Areas of research included Infrared Astronomy Satellite (IRAS) high resolution studies and modeling of closely interacting galaxies; galaxy collisions: infrared observations and analysis of numerical models; and UV spectroscopy of massive young stellar populations in interacting galaxies. Both observational studies and theoretical modelling of interacting galaxies are covered. As a consequence the report is divided into two parts, one on each aspect of the overall project.

Lamb, Susan A.↗

Development of a numerical model for simulating stress corrosion cracking in spent nuclear fuel canisters

Abstract Prediction and detection of the chloride-induced stress corrosion cracking (CISCC) in Type 304 stainless steel spent nuclear fuel canisters are vital for the lifetime extension of dry storage canisters. This paper conducts a critical review that focuses on the numerical modeling and simulation on the research progress of the CISCC. The numerical models emphasizing the residual stress, susceptible microstructure, and corrosive environment are summarized individually. Meanwhile, the simulation studies on the role of hydrogen-assisted cracking are reviewed. Finally, a multi-physical numerical model, which combines the different fields is proposed based on our recent investigation.

Materials Science↗

Monitoring and Numerical Modeling of Shallow CO 2 Injection, Greene County, Missouri

The project titled Monitoring and Numerical Modeling of Shallow CO 2 Injection, Greene County, Missouri provided training for three graduate students in areas related to carbon capture and storage. Numerical modeling of CO 2 injection into the St. Francois aquifer at the Southwest Power Plant Site in Greene County, Missouri indicates that up to 4.1 x 10 5 metric tons of CO 2 per year could be injected for 30 years without exceeding a 3 MPa differential injection pressure. The injected CO 2 would remain sequestered below the top of the overlying caprock (St. Francois confining unit) for more than 1000 years. Geochemical modeling indicates that portions of the injected CO 2 will react rapidly with trace minerals in the aquifer to form various solid carbonate mineral phases. These minerals would store significant portions of injected CO 2 over geologic time scales. Finally, a GIS data base on the pore-fluid chemistry of the overlying aquifer system in Missouri, the Ozark aquifer, was compiled from many sources. This data base could become useful in monitoring for leakage from future CO 2 sequestration sites.

54 ENVIRONMENTAL SCIENCES↗

Numerical modeling of quasi-static coronal loops. I - Uniform energy input

A quasi-static numerical model for coronal loops is considered for the case of a uniform energy input per unit volume into the loops. A line dipole model is used to represent the loop magnetic field, and the variations in loop cross section observed in X-ray photographs are parameterized by the ratio between the cross-sectional areas at the loop apex and base. The results of numerical modeling indicate that for an area ratio greater than unity, increases in the area ratio of a loop with a given length and apex area cause a general rise in electron density and a fall in the temperature gradient, leading to large increases in the differential emission factor at high temperatures. The differential function obtained is significantly different from that predicted by analytical models; however, analytical predictions for the temperature-electron density relations are comparable to numerical results. It is also concluded that even a symmetrical loop may have a maximum temperature away from the apex.

Vesecky, J. F.↗

Numerical Model Studies of the Martian Mesoscale Circulations

The study objectives were to evaluate by numerical modeling various possible mesoscale circulation on Mars and related atmospheric boundary layer processes. The study was in collaboration with J. Tillman of the University of Washington (who supported the study observationally). Interaction has been made with J. Prusa of Iowa State University in numerical modeling investigation of dynamical effects of topographically-influenced flow. Modeling simulations included evaluations of surface physical characteristics on: (i) the Martian atmospheric boundary layer and (ii) their impact on thermally and dynamically forced mesoscale flows. Special model evaluations were made in support of selection of the Pathfinder landing sites. J. Tillman's finding of VL-2 inter-annual temperature difference was followed by model simulations attempting to point out the forcing for this feature. Publication of the results in the reviewed literature in pending upon completion of the manuscripts in preparation as indicated later.

Segal, Moti↗

Efficient Multi-Scale, Thermo-Hydro-Mechanical Numerical Model for Simulation of Long-Term Stability of Rooms for Nuclear Waste Disposal

This project demonstrated the feasibility of developing a numerical modeling tool that provides an efficient and unique approach to analyze the geomechanical performance of a deep geological repository (DGR) for high-level nuclear waste. The numerical modeling tool is physics-based and models the thermo-hydro-mechanical (THM) processes during the required time (up to one million years) for a DGR. The unique capability of the developed code is explicit representation of fracturing and a discrete fracture network (DFN) in the model that includes the entire repository layout for simulated time of one million years. Therefore, it can potentially address one of the challenges of analysis of a DGR, which is efficient numerical simulation of a multi-scale, physics-based models.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Numerical Model Development and Validation for the WECCOMP Control Competition: Preprint

This paper details the development and validation of a numerical model of the Wavestar wave energy converter (WEC) in WEC-Sim. This numerical model was developed in support of the WEC Control Competition (WECCCOMP), an open competition with the objective of maximizing WEC power production through innovative control strategies. WECCCOMP has two stages: numerical implementation of control strategies, and experimental implementation. The work presented in this paper is for support of the stage one numerical implementation, where contestants are provided a WEC-Sim model of the Wavestar device to develop their control algorithms.

16 TIDAL AND WAVE POWER↗