SEARCH · Search NASA

Results for “Numerical entropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Entropy condition satisfying approximations for the full potential equation of transonic flow

A class of conservative difference approximations for the steady full potential equation was presented. They are, in general, easier to program than the usual density biasing algorithms, and in fact, differ only slightly from them. Rigorous proof indicated that these new schemes satisfied a new discrete entropy inequality, which ruled out expansion shocks, and that they have sharp, steady, discrete shocks. A key tool in the analysis is the construction of a new entropy inequality for the full potential equation itself. Results of some numerical experiments using the new schemes are presented.

Osher, S.↗

NASA NTRS1990

Encoding Y,I,Q component estimates of an NTSC composite signal

Several new techniques for reducing the entropy of a Y,I,Q component digital transmission are presented. A discussion of each technique is presented along with objective and subjective analysis. For a set of four test pictures, the average Y,I,Q entropy/pixel was reduced by nearly 80 percent. An initial component system entropy of 11.08 bits/pixel was reduced to 2.33 bits/pixel. Although exact numeric results are dependent on the separation technique used, the methods presented may be applied to systems using other component separation methods.

Border, David A.↗

NASA NTRS1997

Interactive Educational Tool for Turbofan and Afterburning Turbojet Engines

A workstation-based, interactive educational computer program has been developed at the NASA Lewis Research Center to aid in the teaching and understanding of turbine engine design and analysis. This tool has recently been extended to model the performance of two-spool turbofans and afterburning turbojets. The program solves for the flow conditions through the engine by using classical one-dimensional thermodynamic analysis found in various propulsion textbooks. Either an approximately thermally perfect or calorically perfect gas can be used in the thermodynamic analysis. Students can vary the design conditions through a graphical user interface; engine performance is calculated immediately. A variety of graphical formats are used to present results, including numerical results, moving bar charts, and student-generated temperature versus entropy (Ts), pressure versus specific volume (pv), and engine performance plots. The package includes user-controlled printed output, restart capability, online help screens, and a browser that displays teacher-prepared lessons in turbomachinery. The program runs on a variety of workstations or a personal computer using the UNIX operating system and X-based graphics. It is being tested at several universities in the midwestern United States; the source and executables are available free from the author.

Benson, Thomas J.↗

NASA NTRS1994

On the Dynamics of TVD Schemes

The dynamics of a class of TVD schemes for model hyperbolic and parabolic equations is studied numerically using a highly parallel supercomputer (CM-5). The objective is to utilize the highly parallel property of the CM-5 to reveal the reliable time step and entropy parameter ranges, and the degree of compressible flux limiters to avoid slow convergence and the production of nonphysical numerical solutions. We choose to study the nonlinear stability property of TVD schemes numerically since it is otherwise not amenable analytically.

Yee, H. C.↗

NASA NTRS1972

Flow field predictions for a slab delta wing at incidence

Theoretical results are presented for the structure of the hypersonic flow field of a blunt slab delta wing at moderately high angle of attack. Special attention is devoted to the interaction between the boundary layer and the inviscid entropy layer. The results are compared with experimental data. The three-dimensional inviscid flow is computed numerically by a marching finite difference method. Attention is concentrated on the windward side of the delta wing, where detailed comparisons are made with the data for shock shape and surface pressure distributions. Surface streamlines are generated, and used in the boundary layer analysis. The three-dimensional laminar boundary layer is computed numerically using a specially-developed technique based on small cross-flow in streamline coordinates. In the rear sections of the wing the boundary layer decreases drastically in the spanwise direction, so that it is still submerged in the entropy layer at the centerline, but surpasses it near the leading edge. Predicted heat transfer distributions are compared with experimental data.

Conti, R. J.↗

NASA NTRS1988

Integral equation solution for transonic and subsonic aerodynamics

Two methods are presented to solve for the subsonic and transonic flows around airfoils. The first method is based on the integral solution of the full-potential equation with a shock-capturing technique only or with shock capturing-shock fitting technique. In the second method, the integral soluton of the full potential equation is coupled with an embedded region of Euler equations around the shock location. The second method is a computationally efficient technique for flows with strong shocks where the entropy increase and vorticity production across the shock are not small. Several numerical examples are presented and compared with the experimental data and other computational results.

Kandil, Osama A.↗

NASA NTRS1973

Sonic boom analysis for high altitude flight at high Mach number

Numerical programs are presented which take into account the nonlinear effects of high Mach number, the entropy change across the shock, the entropy and enthalpy variations in the atmospheric layer and the gravitational effect. Extension of the programs for the axisymmetric problems to handle nonaxisymmetric terms is described. The asymmetry can be caused by the geometry of the body, the lift and also the fact that the variations in the atmospheric layer are two-dimensional. Numerical results demonstrating the influences of these effects and comparison with existing approximate theories are presented.

Ferri, A.↗

NASA NTRS1976

Nonlinear sonic boom analysis including the asymmetric effects

A numerical program is developed which takes into account the nonlinear effects of high Mach number, the entropy change across the shock, the entropy and enthalpy variations in the atmospheric layer and the gravitational effect. The program differs from the existing ones by accounting for non-axisymmetric terms. The asymmetry can be caused by the geometry of the body, the lift and also the fact that the variations in the atmospheric layer are two-dimensional. Numerical results demonstrate that the influence of these asymmetric effects tends to lower the pressure signature.

Ferri, A.↗

NASA NTRS1983

A numerical method based on the Fourier-Fourier transform approach for modeling 1-D electron plasma evolution

A numerical method is presented for studying one-dimensional electron plasma evolution under typical interplanetary conditions. The method applies the Fourier-Fourier transform approach to a plasma model that is a generalization of the electrostatic Vlasov-Poisson system of equations. Conservation laws that are modified to include the plasma model generalization and also the boundary effects of nonperiodic solutions are given. A new conservation law for entropy in the transformed space is then introduced. These conservation laws are used to verify the numerical solutions. A discretization error analysis is presented. Two numerical instabilities and the methods used for their suppression are treated. It is shown that in interplanetary plasma conditions, the bump-on-tail instability produces significant excitation of plasma oscillations at the Bohm-Gross frequency and its second harmonic. An explanation of the second harmonic excitation is given in terms of wave-wave coupling during the growth phase of the instability.

Klimas, A. J.↗

NASA NTRS1991

Shock wave interaction with an abrupt area change

The wave patterns that occur when a shock wave interacts with an abrupt area changed are analyzed in terms of the incident shock wave Mach number and area-jump ratio. The solutions predicted by a semi-similar models are in good agreement with those obtained numerically from the quasi-one-dimensional time-dependent Euler equations. The entropy production for the wave system is defined and the principle of minimum entropy production is used to resolve a nonuniqueness problem of the self-similar model.

Salas, Manuel D.↗

NASA NTRS2012

The Outer Limits of Galaxy Clusters: Observations to the Virial Radius with Suzaku, XMM,and Chandra

The outskirts of galaxy clusters, near the virial radius, remain relatively unexplored territory and yet are vital to our understanding of cluster growth, structure, and mass. In this presentation, we show the first results from a program to constrain the sate of the outer intra-cluster medium (ICM) in a large sample of galaxy clusters, exploiting the strengths of three complementary X-ray observatories: Suzaku (low, stable background), XMM-Newton (high sensitivity),and Chandra (good spatial resolution). By carefully combining observations from the cluster core to beyond r200, we are able to identify and reduce systematic uncertainties that would impede our spatial and spectral analysis using a single telescope. Our sample comprises nine clusters at z is approximately 0.1-0.2 fully covered in azimuth to beyond r200, and our analysis indicates that the ICM is not in hydrostatic equilibrium in the cluster outskirts, where we see clear azimuthal variations in temperature and surface brightness. In one of the clusters, we are able to measure the diffuse X-ray emission well beyond r200, and we find that the entropy profile and the gas fraction are consistent with expectations from theory and numerical simulations. These results stand in contrast to recent studies which point to gas clumping in the outskirts; the extent to which differences of cluster environment or instrumental effects factor in this difference remains unclear. From a broader perspective, this project will produce a sizeable fiducial data set for detailed comparison with high-resolution numerical simulations.

Miller, Eric D.↗

NASA NTRS2022

Interaction of a Tunnel-like Acoustic Disturbance Field with a Blunt Cone Boundary Layer at Mach 8

The existing measurements of laminar-to-turbulent transition over circular cones in conventional (i.e., “noisy”) hypersonic wind tunnels have established that the transition location moves downstream when the nose radius is increased from zero. However, this initially downstream movement slows down and ultimately reverses beyond a critical value of the nose radius, and may be related to external forcing in the form of freestream disturbances and/or surface roughness. To understand the effects of freestream acoustic disturbances on transition reversal over a blunt body, hypersonic boundary-layer receptivity to broadband freestream acoustic disturbances from the nozzle wall of a digital conventional wind tunnel is investigated by both direct numerical simulations (DNS) and modal and nonmodal stability analysis. A Mach 8 flow over a 7 deg half-angle cone with a nose radius of 𝑅 𝑛 = 5.2mm and freestream Reynolds number of 12.2 × 10 6 m -1 is considered. The results show that the broadband tunnel noise in the free stream of a convectional hypersonic wind tunnel (i.e., outside of the nozzle-wall turbulent boundary layer) can be well represented by an acoustic model with an ansatz of slow acoustic waves. With successful calibration of the model parameters against the precursor tunnel DNS, such an acoustic ansatz can successfully reproduce both the frequency-wavenumber spectra and the temporal evolution of the broadband tunnel noise radiated from the nozzle wall. Additionally, the DNS of the Mach 8 blunt cone with tunnel-like acoustic input above the bow shock showed that the spectra of wall-pressure and heat-transfer fluctuations recovers the signature of the axisymmetric waves predicted by the nonmodal analysis. Furthermore, the azimuthal wavenumber and frequency spectrum of the temperature fluctuations as a function of the wall-normal distance show higher amplitudes for three-dimensional waves above the boundary-layer edge. The numerical schlieren contours show the inclined structures commonly observed in blunt cone experiments, demonstrating that they correspond to three-dimensional structures due to freestream disturbances in the presence of an entropy layer.

Boundary-layer transition↗

NASA NTRS1995

Investigation of computational and spectral analysis methods for aeroacoustic wave propagation

Most computational fluid dynamics (CFD) schemes are not adequately accurate for solving aeroacoustics problems, which have wave amplitudes several orders of magnitude smaller yet with frequencies larger than the flow field variations generating the sound. Hence, a computational aeroacoustics (CAA) algorithm should have minimal dispersion and dissipation features. A dispersion relation preserving (DRP) scheme is, therefore, applied to solve the linearized Euler equations in order to simulate the propagation of three types of waves, namely: acoustic, vorticity, and entropy waves. The scheme is derived using an optimization procedure to ensure that the numerical derivatives preserve the wave number and angular frequency of the partial differential equations being discretized. Consequently, simulated waves propagate with the correct wave speeds and exhibit their appropriate properties. A set of radiation and outflow boundary conditions, compatible with the DRP scheme and derived from the asymptotic solutions of the governing equations, are also implemented. Numerical simulations are performed to test the effectiveness of the DRP scheme and its boundary conditions. The computed solutions are shown to agree favorably with the exact solutions. The major restriction appears to be that the dispersion relations can be preserved only for waves with wave lengths longer than four or five spacings. The boundary conditions are found to be transparent to the outgoing disturbances. However, when the disturbance source is placed closer to a boundary, small acoustic reflections start appearing. CAA generates enormous amounts of temporal data which needs to be reduced to understand the physical problem being simulated. Spectral analysis is one approach that helps us in extracting information which often can not be easily interpreted in the time domain. Thus, three different methods for the spectral analysis of numerically generated aeroacoustic data are studied. First, the capabilities of two traditional methods for spectral analysis, namely, the Blackman-Tukey method and periodogram method, are compared in estimating the spectra of a simple-periodic process. The periodogram is then applied to analyze transitory-deterministic processes. Finally, these two methods are compared with a more recent method, referred as the Weighted-Overlapped-Segment-Averaging (WOSA) method, in estimating the spectra of a chaotic (random-like) process. From the demonstrative case for the spectral analyses of data generated by simple-periodic process, the periodogram method is found to give a better estimate of the steep-sloped spectra than the Blackman-Tukey method. Also, for this problem, the Hanning window is found to perform better with the periodogram method than with the Blackman-Tukey method. Finally, for the spectral analysis of data generated by the chaotic process, the periodogram method does not perform well, whereas, the WOSA and Blackman-Tukey methods give equivalently good results.

Vanel, Florence O.↗

NASA NTRS2001

High Order Difference Method for Low Mach Number Aeroacoustics

A high order finite difference method with improved accuracy and stability properties for computational aeroacoustics (CAA) at low Mach numbers is proposed. The Euler equations are split into a conservative and a symmetric non- conservative portion to allow the derivation of a generalized energy estimate. Since the symmetrization is based on entropy variables, that splitting of the flux derivatives is referred to as entropy splitting. Its discretization by high order central differences was found to need less numerical dissipation than conventional conservative schemes. Owing to the large disparity of acoustic and stagnation quantities in low Mach number aeroacoustics, the split Euler equations are formulated in perturbation form. The unknowns are the small changes of the conservative variables with respect to their large stagnation values. All nonlinearities and the conservation form of the conservative portion of the split flux derivatives can be retained, while cancellation errors are avoided with its discretization opposed to the conventional conservative form. The finite difference method is third-order accurate at the boundary and the conventional central sixth-order accurate stencil in the interior. The difference operator satisfies the summation by parts property analogous to the integration by parts in the continuous energy estimate. Thus, strict stability of the difference method follows automatically. Spurious high frequency oscillations are suppressed by a characteristic-based filter similar to but without limiter. The time derivative is approximated by a 4-stage low-storage second-order explicit Runge-Kutta method. The method has been applied to simulate vortex sound at low Mach numbers. We consider the Kirchhoff vortex, which is an elliptical patch of constant vorticity rotating with constant angular frequency in irrotational flow. The acoustic pressure generated by the Kirchhoff vortex is governed by the 2D Helmholtz equation, which can be solved analytically using separation of variables.

Mueller, B.↗

NASA NTRS2019

Efficient Entropy Stable Gauss Collocation Methods

The construction of high-order entropy stable collocation schemes on quadrilateral and hexahedral elements has relied on the use of Gauss-Legendre-Lobatto collocation points and their equivalence with summation-by-parts (SBP) finite difference operators. In this work, we show how to efficiently generalize the construction of semidiscrete, entropy stable schemes on tensor product elements to Gauss points and generalized SBP operators. Numerical experiments suggest 8 that the use of Gauss points significantly improves accuracy on curved meshes.

Jesse Chan↗

NASA NTRS1986

The discrete one-sided Lipschitz condition for convex scalar conservation laws

Physical solutions to convex scalar conservation laws satisfy a one-sided Lipschitz condition (OSLC) that enforces both the entropy condition and their variation boundedness. Consistency with this condition is therefore desirable for a numerical scheme and was proved for both the Godunov and the Lax-Friedrichs scheme--also, in a weakened version, for the Roe scheme, all of them being only first order accurate. A new, fully second order scheme is introduced here, which is consistent with the OSLC. The modified equation is considered and shows interesting features. Another second order scheme is then considered and numerical results are discussed.

Brenier, Yann↗

NASA NTRS2020

Entropy Stable Nonconforming Discretizations with the Summation-By-Parts Property for Curvilinear Coordinates

The entropy conservative/stable algorithm of Friedrichet al.(2018) for hyperbolic conservation laws on nonconforming p-refined/coarsened Cartesian grids, is extended to curvilinear grids for the compressible Euler equations. The primary focus is on constructing appropriate coupling procedures across the curvilinear nonconforming interfaces. A simple and flexible approach is proposed that uses interpolation operators from one element to the other. On the element faces,the analytic metrics are used to construct coupling terms, while metric terms in the volume are approximated to satisfy a discretization of the geometric conservation laws. The resulting scheme is entropy conservative/stable, elementwise conservative, and freestream preserving. The accuracy and stability properties of the resulting numerical algorithm are shown to be comparable to those ofthe original conforming scheme (∼p+ 1 convergence) in the context of the isentropic Euler vortex and the inviscid Taylor–Green vortex problems on manufactured high order grids.

David Del Rey Fernandez↗

NASA NTRS1979

Feature selection via entropy minimization: An example using LANDSAT satellite data

The author has identified the following significant results. The minimum entropy model may provide several useful advantages over traditional techniques for processing LANDSAT data. Total computer time to conduct a complete pattern recognition process is reduced. Subjective (transformed image), as well as statistically derived information is made available to the analyst/user much earlier in the analysis process. A rapid feedback loop in which numerous training set combinations can be tested for difference and representativeness is available. Additional tests of LANDSAT data processing using the minimum entropy model are clearly justified.

Zandonella, A.↗