Search NASA⌕ Search

SEARCH · Search NASA

Results for “OCEANOGRAPHIC DATA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

The geoid spectrum from altimetry

Preliminary estimates of the global spectrum of the sea surface and geoid are made using altimeter data from the GEOS 3 and Skylab spacecraft. In all, the equivalent of about seven revolutions of data has served from the 'global' estimates. It is found that the power spectrum of the sea surface generally follows the expected values from Kaula's rule applied to the geoid. Analysis of overlapping altimetry arcs (and oceanographic data) reveals that the surface spectrum is dominated by the geoid to about 500 cycles, but the sea state departures are significant starting at about 250 cycles. At less than 500 cycles (40 km half-wavelength) the total power in the marine geoid may be negligible (much less than 20 cm).

Wagner, C. A.↗

Oceanic transports of mass, heat, and salt in the western North Pacific

An optimum orbit of the satellite will be presented for confirmation of estimates of tides and interpolation errors. Hydrographic surveys complementary to the routine surveys will be planned in Phase 1 by using research vessels belonging to Japanese universities. Direction measurements of oceanic transports with moored current meters and shipborne acoustic Doppler velocimeters will be planned for selected sections as an activity of the Japan-WOCE (World Ocean Circulation Experiment) Project. In the operational phase of TOPEX/POSEIDON, the delivered altimeter data will be used for the computation of surface geostrophic velocities to be applied in the hydrographic sections of the Japan Meteorological Agency, Hydrographic Department, Japan Fisheries Agency, and the universities. The estimates of transports are made by the co-investigators of each agency. The composite of the transports in the circulations will be made at the Japan Oceanographic Data Center. The direct measurements of current velocity and transports will be made mainly by the principal investigator.

Taira, K.↗

Assessment of Model Hub Height Wind Speed Performance Using DOE Lidar Buoy Data

As the offshore wind industry continues to gain momentum both in the U.S. and globally, reanalysis products remain essential tools for the lifecycle of a wind farm. From project siting and production estimates to determining construction and maintenance windows, reanalysis products play an important role. These regional and global long-term models also serve as inputs to higher resolution models. With such wide-ranging impacts on the offshore wind industry, the need for validation of reanalysis products is strong, particularly at typical turbine hub heights. Pacific Northwest National Laboratory (PNNL) operates two AXYS WindSentinelTM buoys for the U.S. Department of Energy (DOE) in order to collect meteorological and oceanographic data, including hub height wind speed, in areas of interest for offshore wind development. This work uses DOE buoy observations off the coasts of New Jersey and Virginia to evaluate the performance of Modern Era Retrospective Analysis for Research and Applications-2 (MERRA-2), the North American Regional Reanalysis (NARR), the European Center for Medium-Range Weather Forecasts (ECMWF) Reanalysis 5th generation (ERA5), and the National Oceanic and Atmospheric Administration (NOAA) assimilation system Rapid Refresh (RAP). Biases and degrees of correspondence are determined for each reanalysis product in order to provide insights on the performance and uncertainty for long-term wind resource characterization. With the baseline metrics determined, this work proceeds with an investigation into the sources of large deviations between the modeled and observed hub height wind speeds during the East Coast lidar buoy deployments. Consistent sources of reanalysis model error include stably stratified flow conditions, high wind shear, flow parallel to the coastline, and tropical and winter storms. For the near shore New Jersey location, offshore winds (i.e. blowing from land to water) tend to be associated with model overestimation of observed hub height wind speed, while winds parallel to the coastline are correlated with model underestimation of wind speed. Similarly, near the Virginia buoy, during southerly winds (parallel to the coastline) models underestimate the observed wind speed due to coastal upwelling. Reanalysis model wind speeds underestimate the hub height winds with increasing stable atmospheric stratification. Reanalysis model biases are seen when the observed wind speeds approach or exceed typical turbine cut-out speeds (around 20 m s-1). Large model errors during winter and tropical storm events, high wind speed events, and ramp events are often the result of wind speed timing and magnitude offsets. Overall, ERA5 provides the most successful representation of observed offshore hub height wind speeds at the U.S. East Coast buoy locations and is therefore best suited as an input boundary condition for model case studies. ERA5 performs well for a variety of atmospheric phenomena, including storms and sea breezes, however RAP, the next most successful reanalysis model, performs best in capturing the frequency of ramp events.

17 WIND ENERGY↗

Data Management as a Cluster Middleware Centerpiece

Through earth and space modeling and the ongoing launches of satellites to gather data, NASA has become one of the largest producers of data in the world. These large data sets necessitated the creation of a Data Management System (DMS) to assist both the users and the administrators of the data. Halcyon Systems Inc. was contracted by the NASA Center for Computational Sciences (NCCS) to produce a Data Management System. The prototype of the DMS was produced by Halcyon Systems Inc. (Halcyon) for the Global Modeling and Assimilation Office (GMAO). The system, which was implemented and deployed within a relatively short period of time, has proven to be highly reliable and deployable. Following the prototype deployment, Halcyon was contacted by the NCCS to produce a production DMS version for their user community. The system is composed of several existing open source or government-sponsored components such as the San Diego Supercomputer Center s (SDSC) Storage Resource Broker (SRB), the Distributed Oceanographic Data System (DODS), and other components. Since Data Management is one of the foremost problems in cluster computing, the final package not only extends its capabilities as a Data Management System, but also to a cluster management system. This Cluster/Data Management System (CDMS) can be envisioned as the integration of existing packages.

Zero, Jose↗

Ocean Variability Beneath the Filchner-Ronne Ice Shelf Inferred From Basal Melt Rate Time Series

Fourteen phase-sensitive radars (ApRES) were deployed on the Filchner-Ronne Ice Shelf (FRIS) to measure variability in its basal melt rate. Melt rates from sites along the Ronne Depression vary seasonally, consistent with the dynamics of the propagation of seasonal dense water from the western ice front into the cavity. Several sites at the back of the FRIS cavity feature a signal with two seasonal maxima. Sub-ice shelf oceanographic data available from one of the sites indicate that this signal is caused by two different pathways followed by the same source water. Inter-annual variability is strongest along a direct flow pathway between western Ronne Ice Front and western Berkner Island. Highest melting occurred in 1999 and 2018, following anomalously low summer sea-ice concentrations in front of the ice shelf. Inter-annual melt rate variability at the back of the FRIS cavity is limited. If present, it is expressed as a suppression or delay in the arrival of the seasonal melt rate minimum, which can be understood in terms of inter-annual stratification changes and variable inflow pathways toward the sites. Long term mean ApRES melt rates agree with estimates from satellite data over eastern FRIS. However, the satellite estimates overstate the area of active basal freezing in the western part of the ice shelf. Furthermore, the temporal melt rate variability from the satellite estimates exaggerates the range of variability at both seasonal and inter-annual time scales with any correspondence between the in-situ and remotely derived inter-annual variability being limited to a single site.

54 ENVIRONMENTAL SCIENCES↗

Powering the Blue Economy Foundational Research & Development Topics Reliability for Marine Energy Power Systems

Ocean observing platforms are deployed across the world’s oceans to collect meteorological and oceanographic data. Current technology makes use of solar panels and battery banks to provide power to these platforms, which can be challenging at high latitudes due to lack of solar insolation and cold temperatures. Marine renewable energy (MRE) generation offers a potential improvement in consistent power generation throughout the year for this use on ocean observation buoys. This report analyzes existing reliability of high latitude coastal weather buoys and tsunami detection buoys to determine performance standards that MRE generation sources must meet to become viable power sources for these remote systems. Using measurements recorded from the U.S. National Data Buoy Center’s coastal weather buoys and tsunami detection buoys, the analysis calculated the historic data availability – or the percentage of time a measurement is recorded – to evaluate the reliability of ocean observation buoys. The results show that coastal weather buoys operate at 74% data availability and the tsunami detection systems operate at an average 72% data availability. The results describe the total reliability of the system, including many different types of failures not associated with the power system such as mooring failures or equipment failures caused by extreme weather. Power system outages may only account for a small portion of the system failures. Reliability is an important design criterion for the power system of ocean observation platforms. Future power systems that would be designed for these buoys, such as an MRE generator, need to have a minimum reliability of 72% and 74% to meet the overall performance of the weather buoys and tsunami buoys, respectively. However, power system reliability likely needs to be much higher than overall system reliability, so that power system outages do not negatively impact the overall performance of the buoy.

42 ENGINEERING↗

NDBC Buoy 46011

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are a part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46012

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46013

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46014

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are a part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46022

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46025

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46026

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46027

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46028

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46042

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46047

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗

NDBC Buoy 46053

The purpose of this dataset is to provide filtered, averaged buoy surface meteorological and oceanographic data and standardize the data format into NetCDF. The buoy was deployed by NDBC. These data are part of the observational database created for supporting the floating offshore wind project within the DOE-funded ORACLE project.

17 WIND ENERGY↗