Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ocean Deployment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Air deployed expendable probes in oceanographic research

Physical oceanographic instrumentation is both nonexpendable and expendable. Expendable instruments for both shipboard and aircraft use were developed which yield moderate accuracy and precision at a low or moderate unit cost and which may be deployed by less trained personnel on less specialized platforms both in more extreme environmental conditions and while underway. While shipboard expendables are familiar to many researchers, most are not familiar with the variety of air deployable expendables available, although the quasi-synoptic, 3-D view of the ocean that aerial studies yield can be very valuable in oceanographic research. As well as acoustic oriented probes, air deployed sensors exist for the measurement of temperature, sound speed, currents, and optical properties, and work is underway to develop probes measuring simultaneous conductivity and temperature. In addition, low cost drifting buoys with both oceanographic and meteorological sensors are available, and ice penetrating probes are being developed for arctic research. Characteristics of these instruments are presented, along with examples of their use and a discussion of some of their not so well publicized shortcomings.

Boyd, Janice D.↗

Testing the Deployment Repeatability of a Precision Deployable Boom Prototype for the Proposed SWOT Karin Instrument

NASA's proposed Surface Water Ocean Topography (SWOT) mission, scheduled to launch in 2020, would provide critical information about Earth's oceans, ocean circulation, fresh water storage, and river discharge. The mission concept calls for a dual-antenna Ka-band radar interferometer instrument, known as KaRIn, that would map the height of water globally along two 50 km wide swaths. The KaRIn antennas, which would be separated by 10 meters on either side of the spacecraft, would need to be precisely deployable in order to meet demanding pointing requirements. Consequently, an effort was undertaken to design build and prototype a precision deployable Mast for the KaRIn instrument. Each mast was 4.5-m long with a required dilitation stability of 2.5 microns over 3 minutes. It required a minimum first mode of 7 Hz. Deployment repeatability was less than +/- 7 arcsec in all three rotation directions. Overall mass could not exceed 41.5 Kg including any actuators and thermal blanketing. This set of requirements meant the boom had to be three times lighter and two orders of magnitude more precise than the existing state of the art for deployable booms.

boom↗

The Surface Longwave Downward Fluxes of the NASA GEWEX SRB Release 4.0 IP Products: Validation Against the Surface-Based BSRN and PMEL Observed Data

Since the NASA Global Energy Water Exchanges (GEWEX) Surface Radiation Budget (SRB) project released its 3rd version of products in 2010, the GEWEX Data Assessments Panel (GDAP) has been working on integrating various data products to address issues in the closing of the global energy and water cycles. The 4th version of the SRB products, Rel. 4.0-IP, has integrated data products from the cloud, aerosol, atmosphere, ocean surface, and land surface projects, coordinating within GDAP, to produce a long-term time series of TOA and surface radiative estimates. The Rel. 4-IP shortwave products span 34 years continuously from July 1983 to June 2017 on a quasi-equal-area 1degree longitude by 1degree latitude grid system. The longwave products are for land only from 1983-07 to 1987-12; for both land and ocean from 1988-01 to 2009-12; and ocean only from 2010-01 to 2017-06. The data are provided at 3 hourly, 3-hourly-monthly, daily and monthly means. The ISCCP HXS clouds and radiances are the key cloud input of the current GEWEX SRB algorithms. In addition, the longwave algorithm has also made changes in cloud microphysical property, surface skin temperature input, surface emissivity, atmospheric profile, adding longwave aerosol optical properties, revising cloud overlap procedure, and so on. Details of changes in both inputs and algorithms are documented in a NASA Algorithm Theoretical Basis Document (ATBD). We have validated the surface longwave downward fluxes against the surface-based Baseline Surface Radiation Network (BSRN) and the Pacific Marine Environmental Laboratory (PMEL) buoy data. As of 2020, the BSRN archive has 12,116 site-months of observed records from 73 stations on all seven continents, and as of 2017, PMEL archive has 4389 buoy months of observed records from 64 buoys deployed in the tropics of Pacific, Atlantic and Indian Oceans. This paper presents how the SRB Rel. 4.0-IP surface longwave downward fluxes compare with these surface-based measurements and how the comparison statistics differ from that of Rel. 3.0.

GEWEX SRB↗

AERONET-OC: Strengths and Weaknesses of a Network for the Validation of Satellite Coastal Radiometric Products

The Ocean Color component of the Aerosol Robotic Network (AERONET-OC) has been implemented to support long-term satellite ocean color investigations through cross-site consistent and accurate measurements collected by autonomous radiometer systems deployed on offshore fixed platforms. The ultimate purpose of AERONET-OC is the production of standardized measurements performed at different sites with identical measuring systems and protocols, calibrated using a single reference source and method, and processed with the same code. The AERONET-OC primary data product is the normalized water leaving radiance determined at center-wavelengths of interest for satellite ocean color applications, with an uncertainty lower than 5% in the blue-green spectral regions and higher than 8% in the red. Measurements collected at 6 sites counting the northern Adriatic Sea, the Baltic Proper, the Gulf of Finland, the Persian Gulf, and, the northern and southern margins of the Middle Atlantic Bay, have shown the capability of producing quality assured data over a wide range of bio-optical conditions including Case-2 yellow substance- and sedimentdominated waters. This work briefly introduces network elements like: deployment sites, measurement method, instrument calibration, processing scheme, quality-assurance, uncertainties, data archive and products accessibility. Emphases is given to those elements which underline the network strengths (i.e., mostly standardization of any network element) and its weaknesses (i.e., the use of consolidated, but old-fashioned technology). The work also addresses the application of AERONET-OC data to the validation of primary satellite radiometric products over a variety of complex coastal waters and finally provides elements for the identification of new deployment sites most suitable to support satellite ocean color missions.

Zibordi, Giuseppe↗

The Impact of Dry Saharan Air on Tropical Cyclone Intensification

The controversial role of the dry Saharan Air Layer (SAL) on tropical storm intensification in the Atlantic will be addressed. The SAL has been argued in previous studies to have potential positive influences on storm development, but most recent studies have argued for a strong suppressing influence on storm intensification as a result of dry air, high stability, increased vertical wind shear, and microphysical impacts of dust. Here, we focus on observations of Hurricane Helene (2006), which occurred during the NASA African Monsoon Multidisciplinary Activities (NAMMA) experiment. Satellite and airborne observations, combined with global meteorological analyses depict the initial environment of Helene as being dominated by the SAL, although with minimal evidence that the SAL air actually penetrated to the core of the disturbance. Over the next several days, the SAL air quickly moved westward and was gradually replaced by a very dry, dust-free layer associated with subsidence. Despite the wrapping of this very dry air around the storm, Helene intensified steadily to a Category 3 hurricane suggesting that the dry air was unable to significantly slow storm intensification. Several uncertainties remain about the role of the SAL in Helene (and in tropical cyclones in general). To better address these uncertainties, NASA will be conducting a three year airborne campaign called the Hurricane and Severe Storm Sentinel (HS3). The HS3 objectives are: To obtain critical measurements in the hurricane environment in order to identify the role of key factors such as large-scale wind systems (troughs, jet streams), Saharan air masses, African Easterly Waves and their embedded critical layers (that help to isolate tropical disturbances from hostile environments). To observe and understand the three-dimensional mesoscale and convective-scale internal structures of tropical disturbances and cyclones and their role in intensity change. The mission objectives will be achieved using two Global Hawk (GH) Unmanned Airborne Systems (UASs) with separate comprehensive environmental and over-storm payloads. The GH flight altitudes (>16.8 km) allow overflights of most convection and sampling of upper-tropospheric winds. Deployments from Goddard s Wallops Flight Facility and ~26-hour flight durations will provide coverage of the entire Atlantic Ocean basin, and on-station times up to 5-22 h depending on storm location. Deployments will be in September of 2012 and from late-August to late- September 2013-2014, with up to eleven 26-h flights per deployment.

Braun, Scott A.↗

Physics of greenhouse effect and convection in warm oceans

Sea surface temperature (SST) in roughly 50% of the tropical Pacific Ocean is warm enough (SST greater than 300 K) to permit deep convection. This paper examines the effects of deep convection on the climatological mean vertical distributions of water vapor and its greenhouse effect over such warm oceans. The study, which uses a combination of satellite radiation budget observations, atmospheric soundings deployed from ships, and radiation model calculations, also examines the link between SST, vertical distribution of water vapor, and its greenhouse effect in the tropical oceans. Since the focus of the study is on the radiative effects of water vapor, the radiation model calculations do not include the effects of clouds. The data are grouped into nonconvective and convective categories using SST as an index for convective activity. On average, convective regions are more humid, trap significantly more longwave radiation, and emit more radiation to the sea surface. The greenhouse effect in regions of convection operates as per classical ideas, that is, as the SST increases, the atmosphere traps the excess longwave energy emitted by the surface and reradiates it locally back to the ocean surface. The important departure from the classical picture is that the net (up minus down) fluxes at the surface and at the top of the atmosphere decrease with an increase in SST; that is, the surface and the surface-troposphere column lose the ability to radiate the excess energy to space. The cause of this super greenhouse effect at the surface is the rapid increase in the lower-troposphere humidity with SST; that of the column is due to a combination of increase in humidity in the entire column and increase in the lapse rate within the lower troposphere. The increase in the vertical distribution of humidity far exceeds that which can be attributed to the temperature dependence of saturation vapor pressure; that is, the tropospheric relative humidity is larger in convective regions. The positive coupling between SST and the radiative warming of the surface by the water vapor greenhouse effect is also shown to exist on interannual time scales.

Inamdar, A. K.↗

Verification of Airborne Radar and Radiometer Measurements Obtained in TOGA COARE

The NASA/JPL Airborne Rain Mapping Radar (ARMAR) on board the NASA DC-8 aircraft, several airborne multi-channel radiometers on board the NASA ER-2 aircraft, and the doppler radars on board the NOAA P-3 aircraft were deployed for rainfall observations collected over the Western Pacific Ocean during the TOGA/COARE experiment in January and February of 1993. Results of rain system observations are given.

radar meteorology rain system mapping radiometers ↗

Thermal Deformation and RF Performance Analyses for the SWOT Large Deployable Ka-Band Reflectarray

A large deployable antenna technology for the NASA Surface Water and Ocean Topography (SWOT) Mission is currently being developed by JPL in response to NRC Earth Science Tier 2 Decadal Survey recommendations. This technology is required to enable the SWOT mission due to the fact that no currently available antenna is capable of meeting SWOT's demanding Ka-Band remote sensing requirements. One of the key aspects of this antenna development is to minimize the effect of the on-orbit thermal distortion to the antenna RF performance. An analysis process which includes: 1) the on-orbit thermal analysis to obtain the temperature distribution; 2) structural deformation analysis to get the geometry of the antenna surface; and 3) the RF performance with the given deformed antenna surface has been developed to accommodate the development of this antenna technology. The detailed analysis process and some analysis results will be presented and discussed by this paper.

thermal distorsion↗

Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) Mission Overview and Science Return

The Low-Earth Orbit (LEO) Flight Test of an Inflatable Decelerator (LOFTID) mission was the culmination of two decades of research and development led by NASA Langley Research Center for Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. A HIAD aeroshell can be hard packed into a small volume for launch and then deployed prior to atmospheric entry for stable aerodynamic deceleration through the atmosphere. Much larger than traditional fixed diameter aeroshells that are constrained by the size of launch vehicle shrouds, inflatable decelerators create more drag and start the deceleration process in the upper reaches of the atmosphere with greater efficiency and stability. Large deployable heatshields enable spacecraft to carry bigger, heavier payloads, including scientific instruments and human support systems for planetary landing and exploration. The success of the LOFTID mission could enable new NASA missions to Mars (including access to higher altitudes than currently possible), Venus, and most solar system destinations with atmospheres, as well as cost-effective payload returns to Earth. With its unique 6m diameter inflatable heatshield, LOFTID was the first-of-a-kind orbital reentry flight, and the largest blunt body atmospheric entry of any kind. On November 10, 2022, the LOFTID aeroshell endured the harsh environments of atmospheric reentry while exhibiting stable aerodynamics through the entire spectrum of hypersonic, supersonic, transonic, and subsonic flight. The demonstration confirmed the HIAD technology structural and thermal performance as the aeroshell protected the 1100 kg Reentry Vehicle (RV) entering Earth’s atmosphere at 8 km/s, reaching Mach 30, and experiencing 9.5 g deceleration before deploying parachutes and gently splashing down in the Pacific Ocean, where it was recovered in excellent condition. The LOFTID aeroshell was exposed to an aeroheating environment representative of many Mars and LEO HIAD applications, and successfully demonstrated the ability of the heat-affected inflatable structure to withstand aerodynamic forces that exceeded those expected at Mars. This mission further demonstrated the viability of HIAD technology to deliver large payloads safely and accurately through an atmosphere via a controlled entry, descent, and landing. Whereas LOFTID was indeed a first-of-a-kind flight for an inflatable heatshield, its remarkable performance assured that it will not be the last of its kind.

J M Dinonno↗

Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) Mission Overview and Science Return

The Low-Earth Orbit (LEO) Flight Test of an Inflatable Decelerator (LOFTID) mission was the culmination of two decades of research and development led by NASA Langley Research Center for Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. A HIAD aeroshell can be hard packed into a small volume for launch and then deployed prior to atmospheric entry for stable aerodynamic deceleration through the atmosphere. Much larger than traditional fixed diameter aeroshells that are constrained by the size of launch vehicle shrouds, inflatable decelerators create more drag and start the deceleration process in the upper reaches of the atmosphere with greater efficiency and stability. Large deployable heatshields enable spacecraft to carry bigger, heavier payloads, including scientific instruments and human support systems for planetary landing and exploration. The success of the LOFTID mission could enable new NASA missions to Mars (including access to higher altitudes than currently possible), Venus, and most solar system destinations with atmospheres, as well as cost-effective payload returns to Earth. With its unique 6m diameter inflatable heatshield, LOFTID was the first-of-a-kind orbital reentry flight, and the largest blunt body atmospheric entry of any kind. On November 10, 2022, the LOFTID aeroshell endured the harsh environments of atmospheric reentry while exhibiting stable aerodynamics through the entire spectrum of hypersonic, supersonic, transonic, and subsonic flight. The demonstration confirmed the HIAD technology structural and thermal performance as the aeroshell protected the 1100 kg Reentry Vehicle (RV) entering Earth’s atmosphere at 8 km/s, reaching Mach 30, and experiencing 9.5 g deceleration before deploying parachutes and gently splashing down in the Pacific Ocean, where it was recovered in excellent condition. The LOFTID aeroshell was exposed to an aeroheating environment representative of many Mars and LEO HIAD applications, and successfully demonstrated the ability of the heat-affected inflatable structure to withstand aerodynamic forces that exceeded those expected at Mars. This mission further demonstrated the viability of HIAD technology to deliver large payloads safely and accurately through an atmosphere via a controlled entry, descent, and landing. Whereas LOFTID was indeed a first-of-a-kind flight for an inflatable heatshield, its remarkable performance assured that it will not be the last of its kind.

John M DiNonno↗

The Southern Ocean Carbon and Climate Observations and Modeling (SOCCOM) Project: A Review

The Southern Ocean serves as the primary gateway through which the intermediate, deep, and bottom waters of the ocean interact with the surface ocean (and thus the atmosphere), and it has a profound influence on the oceanic uptake of anthropogenic carbon and heat as well as nutrient resupply from the abyss to the surface. Yet it has been the least observed and understood region of the world ocean. The Southern Ocean Carbon and Climate Observations and Modeling (SOCCOM) project was implemented in 2014 with a goal to help remedy this deficit in observations and understanding. The SOCCOM project is based on two major advances that have the potential to transform understanding of the Southern Ocean. The first is the development of new biogeochemical sensors mounted on autonomous profiling floats that allow sampling of ocean biogeochemistry in 3-dimensional space. Floats may detect processes with a temporal resolution that ranges from hours to years. The second is that the climate modeling community finally has the computational resources and physical understanding to develop fully coupled climate models that can represent crucial, mesoscale processes in the Southern Ocean, as well as corresponding models that assimilate observations to produce a state estimate. The observational component, based on deployment of profiling floats with oxygen, nitrate, pH and bio-optical sensors, is generating vast amounts of new biogeochemical data that provide a year-round view of the Southern Ocean from the surface to 2000 m. The modeling effort is applying these observations and enhancing our understanding of the current ocean, and reducing uncertainty in projections of future carbon and nutrient cycles and climate. After nine years of operation, including a project renewal in the sixth year, the SOCCOM project has deployed more than 260 profiling floats. These floats have collected over 27,000 vertical profiles throughout the Southern Ocean. A data-assimilating biogeochemical state estimate model has been implemented. Here, the design of the SOCCOM project is reviewed and the scientific results that have been obtained are described. The project’s capability to help meet the observing system priorities outlined for a notional UN Decade for Ocean Sciences Southern Ocean observing system is assessed.

Jorge L. Sarmiento↗

An Analysis of Coordinated Observations from NOAA's Ronald Brown Ship and G-IV Aircraft in a Landfalling Atmospheric River over the North Pacific During CalWater-2015

To gain a more complete observational understanding of atmospheric rivers (ARs) over the data-sparse open ocean, we used a diverse suite of mobile observing platforms deployed on NOAAs Ronald H. Brown (RHB) research vessel and G-IV research aircraft during the CalWater-2015 field campaign to describe the structure and evolution of a long-lived AR modulated by six frontal waves over the northeastern Pacific on 20-25 January 2015. Satellite observations and reanalysis diagnostics provided synoptic-scale context, illustrating the warm, moist southwesterly airstream within the quasi-stationary AR situated between an upper-level trough and ridge. The AR remained offshore of the U.S. West Coast but made landfall across British Columbia where heavy precipitation fell. Forty-seven rawinsondes launched from the RHB provided a comprehensive thermodynamic and kinematic depiction of the AR, including uniquely documenting an upward intrusion of strong water-vapor transport in the low-level moist southwesterly flow during the passage of frontal waves 2 through 6. A collocated 1290-MHz wind profiler showed an abrupt frontal transition from southwesterly to northerly flow below 1 km MSL coinciding with the tail-end of AR conditions. Shipborne radar and disdrometer observations in the AR uniquely captured key microphysical characteristics of shallow warm rain, convection, and deep mixed-phase precipitation. Novel observations of sea-surface fluxes in a midlatitude AR documented persistent ocean-surface evaporation and sensible-heat transfer into the ocean. The G-IV aircraft flew directly over the ship, with dropsonde and radar spatial analyses complementing the temporal depictions of the AR from the RHB. The AR characteristics varied, depending on the location of the cross section relative to the frontal waves.

atmospheric rivers↗

TOPEX/Poseidon - The ocean topography experiment

The configuration of the TOPEX/Poseidon mission is discussed in an overview of the launch and experimental objectives related to the deployment planned for 1992. The spacecraft carries equipment for radar altimetry and precise orbit determination, and the instruments are expected to provide precise observations of global ocean dynamics. Six scientific instruments are described including the Laser Retroreflector Array, the Tracking System Receiver, and GPS Demonstration Receiver. Also described are the orbit configuration of the satellite, verification of system performance, and the techniques for data processing. The observations from the TOPEX/Poseidon experiment can provide data that is free of sea-level variabilities and describes the general circulation of the ocean and its variability.

Fu, Lee-Lueng↗

Rapidly Deployable Enclosure

Balloons expand to surround and seal off equipment. Housing of undeployed enclosure encircles equipment to be enclosed. Deployed enclosure surrounds equipment and seals it from environment. Fully deployed within few seconds. Conceived to shield rocket booster from ocean water when dropped after launching spacecraft, adapted to suit terrestrial equipment that must be shielded quickly against impending immersion.

Rournier, Walter L.↗

Electrical design and analysis of the TOPEX/Poseidon solar array

TOPEX/Poseidon, a scientific satellite to be launched into low earth orbit, will map the surface topography of the earth's oceans. The satellite derives its primary electrical power from a deployable, sun tracking, rigid, single wing, rectangular solar array with overall dimensions of approximately 26 by 11 ft. The requirements which affect the electrical performance of the solar array and the method by which each requirement is satisfied are addressed. The worst-case power calculations used to size the solar array and to verify power capability are discussed. Also included is a detailed description of the solar array configuration and a summary of the qualification and acceptance testing.

Roufberg, Lew↗

[MODIS Investigation]

The objectives of the last six months were: (1) Revise the algorithms for the Fluorescence Line Height (FLH) and Chlorophyll Fluorescence Efficiency (CFE) products, especially the data quality flags; (2) Revise the MOCEAN validation plan; (3) Deploy and recover bio-optical instrumentation at the Hawaii Ocean Time-series (HOT) site as part of the Joint Global Ocean Flux Study (JGOFS); (4) Prepare for field work in the Antarctic Polar Frontal Zone as part of JGOFS; (5) Submit manuscript on bio-optical time scales as estimated from Lagrangian drifters; (6) Conduct chemostat experiments on fluorescence; (7) Interface with the Global Imager (GLI) science team; and (8) Continue development of advanced data system browser. We are responsible for the delivery of two at-launch products for AM-1: Fluorescence line height (FLH) and chlorophyll fluorescence efficiency (CFE). We also considered revising the input chlorophyll, which is used to determine the degree of binning. We have refined the quality flags for the Version 2 algorithms. We have acquired and installed a Silicon Graphics Origin 200. We are working with the University of Miami team to develop documentation that will describe how the MODIS ocean components are linked together.

Abbott, Mark R.↗

Apollo-Era Life Rafts Save Hundreds of Sailors

The space shuttle is unique among spacecraft in that it glides back to Earth and lands like an airplane, usually touching ground near where it launched at Kennedy Space Center, but sometimes, in poor weather, gliding into the back-up landing site at Dryden Flight Research Center and then catching a ride back to the Cape on the back of a modified Boeing 747. Before NASA began flying the shuttle, though, astronauts had a longer, more involved trip back to base after a mission. Their capsule, called the command module, would plunge through the atmosphere before releasing a series of parachutes that would slow the craft enough for it to land on the water without too significant of an impact. Called a splashdown, this type of landing put the astronauts out in the ocean, where a specially designated U.S. Navy ship would then deploy a helicopter to retrieve the space travelers. Waiting for the rescue, the astronauts would release a highly visible marker dye into the water, then leave the command module and climb aboard a life raft. These early space pioneers had traveled thousands of miles and then landed safely back on Earth. The journey s end was in sight, but they had one more obstacle. The rotor downdraft from the helicopter coming to retrieve them, reaching sometimes as much as 100 knots per hour, was enough to flip a typical flat-bottomed life raft. Not willing to be thwarted after coming so far, NASA engineers began devising a solution. They knew they needed a highly stable inflatable raft capable of riding out the rough winds, and the solution was to make use of the most abundant resource available: water. Engineers at NASA s Johnson Space Center went to work designing and patenting a hydrodynamically stabilized ballast system that would prevent a life raft from tipping in choppy seas and fierce winds.

Source record↗