Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oil & Gas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Regional Oil and gas Aerial Methane Synthesis model (ROAMS) v2.0

The Regional Oil and gas Aerial Methane Synthesis model is a tool to convert the results of wide-area, source-resolved aerial methane remote sensing surveys of oil and natural gas infrastructure in a given region into methane emissions inventories (estimates of the magnitude and breakdown of methane emissions from the surveyed infrastructure). The tool leverages databases of source-resolved methane emissions detected in aerial surveys, aerial survey coverage information (which areas were measured and when), data summarizing surveyed oil and natural gas infrastructure and production (derived from third-party databases), as well as state-of-the-art mechanistic emissions simulation tools to characterize emissions too small for the aerial system to see. The regional methane emissions estimates produced by this tool are much more granular in both space and asset type than common satellite- or flux tower-based regional estimates. Unlike other tools for converting site-level measurements into regional emissions estimates, our unique geostatistical approach integrates aerially measured emissions with limited need for statistical extrapolation, which can be highly sensitive to modeler assumptions. As a result, ROAMS-based estimates of regional methane emissions from oil and gas activity are widely viewed as highly credible, as evidenced by the success of Dr. Sherwin's recent paper in Nature.

Sherwin, Evan [Lawrence Berkeley National Laborato↗
NASA NTRS1994

Oil-And-Gas-Fire Snubber

Flame diverted and extinguished without explosives. Oil-and-gas-fire snubber consists of pipe with two exit branches and large selector valve, positioned over well, on path of escaping fuel. Flame moved to one side; then flow of fuel moved to other side, away from flame. Two versions of snubber have different uses. First used only to extinguish fire. Exit branch only long enough to keep fuel away to prevent reignition. Second needed if well not capped after fire at well extinguished and oil and gas remained present in problem quantities. Exit branch long enough to extend to oil-storage tank, and gas separated from oil and vented or burned at convenient location.

Weinstein, Leonard M.↗
DOE OSTI2025

Computational Fluid Dynamics-Based Modeling of Methane Flows Around Oil and Gas Equipment

Recent studies estimate that emissions from oil and gas production facilities contribute between 20 and 50% of the total methane ( CH 4 ) emitted in the US; therefore, quantifying and reducing these emissions are crucial for achieving climate goals. Methane quantification depends on both measuring methane concentrations and converting them to emissions through a modeling framework. Currently, simple atmospheric dispersion models are primarily used to quantify emissions and concentrations, but these estimates are highly uncertain when quantifying emissions from complex aerodynamic sources, such as oil and gas facilities. This investigation used a CFD modeling approach, which can account for aerodynamic complexity but has hitherto not been used to model methane concentrations downwind of a methane release of a known rate, and compared it against in situ measurements. High-time-resolution (1 Hz) methane concentration and meteorological data were measured during experiments conducted at the METEC on 21 March and 11 July 2024. The METEC site configuration, measured wind data, and controlled emission rates were used as input for the CONVERGE CFD model to model downwind CH 4 concentration. The modeling was carried out between 20 and 70 m, from two different points of release in two separate controlled-release experiments, one from a separator and another from a wellhead. In these experiments, we found that the CFD model could predict the CH 4 concentrations downwind of the release to a good degree. The model was evaluated on multiple metrics to assess its performance in estimating methane concentrations at typical fence line distances (∼30 m). These results help us to understand external flows and the ability of CFD models to predict downwind concentrations in aerodynamically complex environments.

03 NATURAL GAS↗
DOE OSTI2026

Seasonality and Declining Intensity of Methane Emissions from the Permian and Nearby US Oil and Gas Basins

We quantify weekly methane emissions and trends from oil and gas production in the US Permian Basin for 2019-2023, and in nearby basins for 2022-2023, by analytical inversion of Tropospheric Monitoring Instrument (TROPOMI) satellite observations with the Integrated Methane Inversion (IMI) at 25 km resolution. Permian oil and gas emissions averaged 4.0 ± 1.1 Tg a-1 over 2019-2023, with large seasonal variation but little interannual variability. Methane intensity fell from 5.2 to 3.2% as production surged. Intensity in the New Mexico Permian fell from 4.5 to 2.1%, approaching the state's 2026 target of <2%. Emissions were on average 50 ± 10% higher in winter than summer, which we corroborate with Permian Basin Tower Network measurements, Insight M aircraft data, and GHGSat satellite observations. This seasonality may be driven in part by higher winter emissions from liquid storage tanks due to decreased separator efficiency in cold conditions. Similar but weaker seasonality along with decreasing emissions and intensities is found in weekly inversions for the Anadarko, Barnett, Eagle Ford, and Haynesville basins in 2022-2023. Our work suggests that better weatherization of oil and gas facilities could significantly reduce methane emissions.

Permian↗
DOE OSTI2026

Locating Undocumented Wells Using Historical Oil and Gas Exploration Maps: A Case Study in Osage County, Oklahoma

Undocumented oil and gas wells lack reliable information about their locations and characteristics, making them difficult to identify. These wells can result in unanticipated delays and costs in the development of nearby surface and subsurface resources, and, if improperly plugged, can cause contamination. This study leverages historical petroleum exploration maps to locate such wells, focusing on Osage County, Oklahoma. Two sets of early 20th century oil and gas exploration maps by the United States Geological Survey were georeferenced and analyzed using a computer vision model to detect well symbols. The locations of detected wells were compared to the location of known wells in the database from the Bureau of Indian Affairs Osage Agency to identify potential undocumented wells. The analysis yielded over 500 potential undocumented wells, with dry holes constituting the largest fraction. Field verification confirmed the presence of some undocumented wells. Comparison with prior work revealed limited overlap, underscoring the complementary value of historical oil and gas maps for locating undocumented wells. This approach demonstrates the utility of integrating historical cartographic resources with modern geospatial and machine learning techniques to improve the identification and management of undocumented wells.

Energy - Petroleum↗
DOE OSTI2026

Mechanistic Modeling of TEG Dehydrator Emissions in Oil and Gas Industry

This work presents a mechanistic modeling approach for simulating methane emissions from triethylene glycol (TEG) dehydrators used in oil & gas (O&G) operations. The model was developed as a modular component of the Mechanistic Air Emissions Simulator (MAES) tool, incorporating species-specific absorption and emission dynamics through two-level, second-order polynomial regression (PR) models trained on ProMax simulation data: (1) species-level regression models that track the transfer rates of individual gas species within the dehydrator unit streams, and (2) outlet flow stream regression models that predict the fraction of inlet gas distributed among the outlet streams of the dehydrator unit. These behaviors were characterized over a range of glycol circulation ratios, wet gas pressures, and temperatures. The model was validated using root mean square error (RMSE) analysis. The species-level PR achieved low root mean square error (RMSE) values (<0.03) for light hydrocarbon species across all dehydrator components, ranging from 0.0009 for methane to 0.029 for normal pentane. Similarly, the outlet-level PR yielded RMSE values below 0.002 for the dry gas fraction, 0.001 for the flash tank fraction, and 0.002 for the still vent fraction, demonstrating strong agreement between predicted and reference ProMax values. When deployed at field facilities, the model significantly improved MAES-simulated dehydrator emissions, revealing that gas-assisted glycol pump emissions are the dominant contributors to both dehydrator-level and site-level methane emissions under uncontrolled conditions. Further analysis of the 154 dehydrator units reported by operators under the AMI 2024 project showed that 54 units (31%) used gas-driven glycol pumps, of which 6 units (11%) operated with uncontrolled flash tanks, and 22 units (40.7%) were identified as potentially oversized. Of the six dehydrator units with uncontrolled gas-assisted pumps, pump emissions accounted for 90.25% of total dehydrator emissions and 63.10% of total site-level emissions. These findings highlight substantial opportunities for emissions mitigation through equipment upgrades.

MAES↗
DOE OSTI2025

Regional Oil and gas Aerial Methane Synthesis model (Analytica) (ROAMS Analytica) v1.5.2

The Regional Oil and gas Aerial Methane Synthesis model (Analytica) is a tool to convert the results of wide-area, source-resolved aerial methane remote sensing surveys of oil and natural gas infrastructure in a given region into methane emissions inventories (estimates of the magnitude and breakdown of methane emissions from the surveyed infrastructure). This version is written in the Analytica programming language, and this version accompanies a correction in preparation for submission to Sherwin et al. 2024 (Nature). The tool leverages databases of source-resolved methane emissions detected in aerial surveys, aerial survey coverage information (which areas were measured and when), data summarizing surveyed oil and natural gas infrastructure and production (derived from third-party databases), as well as state-of-the-art mechanistic emissions simulation tools to characterize emissions too small for the aerial system to see. The regional methane emissions estimates produced by this tool are much more granular in both space and asset type than common satellite- or flux tower-based regional estimates. Unlike other tools for converting site-level measurements into regional emissions estimates, our unique geostatistical approach integrates aerially measured emissions with limited need for statistical extrapolation, which can be highly sensitive to modeler assumptions. As a result, ROAMS-based estimates of regional methane emissions from oil and gas activity are widely viewed as highly credible, as evidenced by the success of Dr. Sherwin's recent paper in Nature.

Sherwin, Evan [Lawrence Berkeley National Laborato↗
DOE OSTI2022

Offshore Oil and Gas Infrastructure Reuse for CCS: Opportunities and Challenges in the U.S. Gulf of Mexico

The United States Gulf of Mexico has historically been a significant oil and gas producing region and continues to produce hydrocarbons today. As such, significant investments have been made to install oil and gas infrastructure such as pipelines, platforms, and wells. As these assets reach the end of their useful life or production associated with the assets is curtailed, the assets become a liability for both the owner/operators and the U.S. and state governments responsible for regulating the assets. There are costs and risks associated with safely decommissioning the assets, and in some cases, the assets may be abandoned (e.g., the owner is no longer a going concern). In parallel, carbon capture and storage (CCS) technology has developed in the United States and interest and incentives for CCS projects have accelerated in recent years, with many public announcements of CCS projects in development in the U.S. Gulf of Mexico region. The region is particularly well-suited to CCS due to the high density of industry on the coastline (i.e., CO 2 sources) and favorable geology in the near-offshore region. CCS also requires the use of many of the same assets required for oil and gas production (pipelines, platforms, wells) and the oil and gas industry has direct experience with CO 2 transport and injection (i.e., EOR). Therefore, the combination of existing infrastructure in close proximity to potential CCS project sites appears to provide a potential “win-win” solution for re-use of existing oil and gas assets. This paper presents a high-level evaluation of oil and gas infrastructure in the Gulf of Mexico with the goals of identifying the scale of the opportunity (e.g., how much existing infrastructure is realistically re-usable), identifying gaps in knowledge/policy/information required to evaluate existing infrastructure for re-use, and proposing key actions that could be pursued to further the assessment of existing infrastructure re-use for CCS.

Infrastructure, reuse, re-purpose, oil and gas, pi↗
NASA NTRS2017

Surface Ozone in the Colorado Northern Front Range and the Influence of Oil and Gas Development During FRAPPE/DISCOVER-AQ in Summer 2014

High mixing ratios of ozone (O3) in the northern Front Range (NFR) of Colorado are not limited to the urban Denver area but were also observed in rural areas where oil and gas activity is the primary source of O3 precursors. On individual days, oil and gas O3 precursors can contribute in excess of 30 ppb to O3 growth and can lead to exceedances of the EPA O3 National Ambient Air Quality Standard. Data used in this study were gathered from continuous surface O3 monitors for June-August 2013-2015 as well as additional flask measurements and mobile laboratories that were part of the FRAPPE/DISCOVER-AQ field campaign of July-August 2014. Overall observed O3 levels during the summer of 2014 were lower than in 2013, likely due to cooler and damper weather than an average summer. This study determined the median hourly surface O3 mixing ratio in the NFR on summer days with limited photochemical production to be approximately 45-55 ppb. Mobile laboratory and flask data collected on three days provide representative case studies of different O3 formation environments in and around Greeley, Colorado. Observations of several gases (including methane, ethane, CO, nitrous oxide) along with O3 are used to identify sources of O3 precursor emissions. A July 23 survey demonstrated low O3 (45-60 ppb) while August 3 and August 13 surveys recorded O3 levels of 75-80 ppb or more. August 3 exemplifies influence of moderate urban and high oil and gas O3 precursor emissions. August 13 demonstrates high oil and gas emissions, low agricultural emissions, and CO measurements that were well correlated with ethane from oil and gas, suggesting an oil and gas related activity as a NOx and O3 precursor source. Low isoprene levels indicated that they were not a significant contributor to O3 precursors measured during the case studies.

Pollution↗
DOE OSTI2023

Procedure for locating oil and gas wells in the Appalachian Basin

Locating undocumented (or poorly documented) oil and gas wells for environmental assessment is often difficult. Remnant features that confirm the presence of a well (intact casing/wellhead, well bore, etc.) are typically less than a meter in size and often are obscured from direct observation on the ground or from the air (by dense vegetation, for example). To efficiently find such features, it is useful to first systematically compile publicly available digital data at progressively smaller scales prior to embarking on field campaigns. Further, the information presented here describes the procedure developed and used by the U.S. Department of Energy's National Energy Technology Laboratory to locate potential oil and gas well sites for follow-up field verification and characterization. Digital data are first compiled from national and state resources such as well location/production databases, historical topographic maps, historical aerial photographs, and LiDAR data. Although each data set is likely to be incomplete or inaccurate to some extent, combining the data resources using geographic information system technology can generate potential well site targets with a higher degree of confidence, which improves the efficiency of fieldwork activities. This workflow was developed in the Appalachian Basin region, and although certain aspects may be unique, the general process would be applicable to locating undocumented wells in other regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Unraveling the ecological success of Iodidimonas in a bioreactor treating oil and gas produced water

Iodidimonas sp., a bacterium found in bioreactors treating oil and gas produced water as well as iodide-rich brines, has garnered attention for its unique ability to oxidize iodine. However, little is known about the metabolic capabilities that enable Iodidimonas sp. to thrive in certain unique ecological niches. In this study, we isolated, characterized, and sequenced three strains belonging to the Iodidimonas genus from the sludge of a membrane bioreactor used for produced water treatment. We investigated the genomic features of these isolates and compared them with the four publicly available isolate genomes from this genus, as well as a metagenome-assembled genome from the source bioreactor. Our Iodidimonas isolates had several genes associated with mitigating salinity, heavy metal, and organic compound stress, which likely help these bacteria to survive in produced water. Phenotyping tests revealed that while the isolates could utilize a wide variety of simple carbon substrates, they failed to degrade aliphatic or aromatic hydrocarbons, consistent with the lack of genes associated with common hydrocarbon degradation pathways in their genomes. We hypothesize that these microbes may lead a scavenging lifestyle in the bioreactor and similar iodide-rich brines. IMPORTANCE: Occupying a niche habitat and having few representative isolates, the genus Iodidimonas is a relatively understudied alphaproteobacterial group. Its ability to corrode pipes in iodine production facilities has economic implications, and its ability to generate potentially carcinogenic iodinated organic compounds during treatment of oil and gas produced water may cause environmental and health concerns with the recycling of treated water. Therefore, detailed characterization of the metabolic potential of the Iodidimonas isolates in this study both sheds light on their adaptation to the environmental conditions they inhabit and has environmental and economic significance.

Acharya, Shwetha M↗
DOE OSTI2024

Characterization of Oil and Gas Drill Cuttings for Critical Mineral Recovery and Reuse Potential as Soil Supplements

Expansion of unconventional oil and natural gas production over the last decade in the United States has resulted in record production of natural gas and oil in 2024. Millions of tons of drill cuttings generated from shale gas development are currently disposed of in landfills. Converting these cuttings into value product(s) such as critical minerals (CMs) and soil supplements, has the potential of reducing environmental impact of fossil fuel exploration. In this study we characterize the CM distribution and extractability from collected drill cuttings and core samples from major U.S. shale formations. A four-step sequential extraction, consisting of a sonicated soap step, sonicated EDTA step , mildly reducing agent, and a oxidizing agent, was developed to simultaneously extract CMs and convert the drill cuttings into soil supplements. Viability of converted drill cuttings as soil supplement was determined with a seedling growth experiment. Results show high concentrations of vanadium (V) (up to 1575 ppm, barite (up to 5 wt. %), and rare earth elements (REE) concentrations (up to 253 ppm). High extractability of selected critical minerals such as REE (19-50%) and Ba (10-58%) show promising results. Preliminary results show seedling growth in a mixture of converted drill cuttings with soil. These results show the potential for recovery of CMs from drill cuttings as an alternative domestic and the reduction of the environmental impact of fossil fuel production.

Barczok, Maximilian↗
DOE OSTI2024

Air quality impacts from the development of unconventional oil and gas well pads: Air toxics and other volatile organic compounds

Unconventional oil and natural gas development (UOGD) has expanded rapidly across the United States in recent decades and raised concerns about associated air quality impacts. While significant effort has been made to quantify methane emissions, relatively few observations have been made of Volatile Organic Compounds (VOCs), especially during drilling and completion of new wells. Extensive air monitoring during development of several large, multi-well pads in Broomfield, Colorado, in the Denver-Julesburg Basin, provides a novel opportunity to examine changes in local air toxics and other VOC concentrations during well drilling and completions and production. These operations offer an especially useful case to study as several management practices were implemented to reduce emissions (e.g., electrified, grid-powered drill rigs and closed loop fluid handling systems to reduce truck traffic and limit fluid handling on the pad). With simultaneous measurements of methane and 50 VOCs from October 2018 to December 2022 at as many as 19 sites near well pads, in adjacent neighborhoods, and at a more distant reference location, we identify impacts from each phase of well development and production. Use of weekly, time-integrated canisters, a Proton Transfer Reaction Mass Spectrometer (PTR-MS), continuous photoionization detectors (PID) to trigger canister collection upon detection of VOC-rich plumes, and an instrumented vehicle, provided a powerful suite of measurements to characterize both transient plumes and longer-term changes in air quality. Prior to the start of well development, VOC gradients were small across Broomfield. Once drilling commenced, concentrations of oil and gas (O&G) related VOCs, including alkanes and aromatics, increased around active well pads. Concentration increases were clearly apparent during certain operations, including drilling, coil tubing/millout operations, and production tubing installation. Emissions of C 8 –C 10 n-alkanes during drilling operations highlighted the importance of VOC emissions from synthetic drilling mud chosen to reduce odor impacts. More than 90 samples were collected of transient plumes. Using composition measurements, meteorological data, and information about well pad activities, these plumes were connected with specific UOGD operations including drilling, flowback, and production equipment maintenance. The chemical signatures of these plumes differed by operation type (e.g., C 8 –C 10 n-alkanes constituted a larger fraction of measured VOCs in drilling-related plumes). Concentrations of individual, oil and gas-related VOCs in these plumes were often several orders of magnitude higher than in background air, with maximum ethane and benzene concentrations of 79,600 and 819 ppbv, respectively. Because these plumes typically impact a monitoring site for just several minutes, they are easily missed by slower-responding instruments. Study measurements highlight future emission mitigation opportunities during UOGD operations, including better control of emissions from shakers that separate drill cuttings from drilling mud, production separator maintenance operations, and periodic emptying of sand cans during flowback operations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Environmental risks and opportunities of orphaned oil and gas wells in the United States

Abstract Hundreds of thousands of documented and undocumented orphaned oil and gas wells exist in the United States (U.S.). These wells have the potential to contaminate water supplies, degrade ecosystems, and emit methane and other air pollutants. Thus, orphaned wells present risks to climate stability and to environmental and human health, which can be reduced by plugging. To quantify environmental risks and opportunities of well plugging at the national level, we analyze data on 81 857 documented orphaned wells across the U.S. We find that > 4.6 million people live within 1 km of a documented orphaned well. 35% of the documented orphaned wells are located within 1 km of a domestic groundwater well, yet only 8% of the wells have groundwater quality data within a 1 km radius. Methane emissions from the documented orphaned wells represent approximately 3%–6% of total U.S. methane emissions from abandoned oil and gas wells, but this estimate is based on measurements at < 0.03% of U.S. abandoned wells. 91% of the documented orphaned wells overlie formations favorable for geologic storage of carbon dioxide and hydrogen, meaning that orphaned well plugging can reduce leakage risks from future storage projects. Finally, we estimate plugging costs for documented orphaned wells to exceed the $4.7 billion federal funding by 30%–80%, emphasizing the importance of prioritizing federal spending on wells with large remediation benefits. Overall, environmental monitoring data are not extensive enough to quantify risks, especially those related to air and water quality and human health. Plugging orphaned wells can provide opportunities for geologic storage of carbon dioxide and hydrogen and geothermal energy development, thereby facilitating efforts to transition to net-zero energy systems. Our analysis on environmental risks and opportunities of orphaned wells provides a framework that can be used to manage the millions of documented and undocumented orphaned wells in the U.S. and abroad.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Datasets and U-Net Model for "A Deep Learning Based Framework to Identify Undocumented Orphaned Oil and Gas Wells from Historical Maps: a Case Study for California and Oklahoma"

This dataset has results and the model associated with the publication Ciulla et al., (2024). It contains a U-Net semantic segmentation model (unet_model.h5) and associated code implemented in tensorflow 2.0 for the model training and identification of oil and gas well symbols in USGS historical topographic maps (HTMC). Given a quadrangle map (7.5 minutes), downloadable at this url: https://ngmdb.usgs.gov/topoview/, and a list of coordinates of the documented wells present in the area, the model returns the coordinates of oil and gas symbols in the HTMC maps. For reproducibility of our workflow, we provide a sample map in California and the documented well locations for the entire State of California (CalGEM_AllWells_20231128.csv) downloaded from https://www.conservation.ca.gov/calgem/maps/Pages/GISMapping2.aspx. Additionally, the locations of 1,301 potential undocumented orphaned wells identified using our deep learning framework or the counties of Los Angeles and Kern in California, and Osage and Oklahoma in Oklahoma are provided in the file found_potential_UOWs.zip. The results of the visual inspection of satellite imagery in Osage County is in the file visible_potential_UOWs.zip. The dataset also includes a custom tool to validate the detected symbols in the HTMC maps (vetting_tool.py). More details about the methodology can be found in the associated paper: Ciulla, F., Santos, A., Jordan, P., Kneafsey, T., Biraud, S.C., and Varadharajan, C. (2024) A Deep Learning Based Framework to Identify Undocumented Orphaned Oil and Gas Wells from Historical Maps: a Case Study for California and Oklahoma. Accepted for publication in Environmental Science and Technology. The geographical coordinates provided correspond to the locations of potential undocumented orphaned oil and gas wells (UOWs) extracted from historical maps. The actual presence of wells need to be confirmed with on-the-ground investigations. For your safety, do not attempt to visit or investigate these sites without appropriate safety training, proper equipment, and authorization from local authorities. Approaching these well sites without proper personal protective equipment (PPE) may pose significant health and safety risks. Oil and gas wells can emit hazardous gasses including methane, which is flammable, odorless and colorless, as well as hydrogen sulfide, which can be fatal even at low concentrations. Additionally, there may be unstable ground near the wellhead that may collapse around the wellbore. This dataset was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor the Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or the Regents of the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof or the Regents of the University of California.

Artificial Intelligence↗
DOE OSTI2020

Daily Satellite Observations of Methane from Oil and Gas Production Regions in the United States

Production of oil and natural gas in North America is at an all-time high due to the development and use of horizontal drilling and hydraulic fracturing. Methane emissions associated with this industrial activity are a concern because of the contribution to climate radiative forcing. We present new measurements from the space-based TROPOspheric Monitoring Instrument (TROPOMI) launched in 2017 that show methane enhancements over production regions in the United States. In the Uintah Basin in Utah, TROPOMI methane columns correlated with in-situ measurements, and the highest columns were observed over the deepest parts of the basin, consistent with the accumulation of emissions underneath inversions. In the Permian Basin in Texas and New Mexico, methane columns showed maxima over regions with the highest natural gas production and were correlated with nitrogen-dioxide columns at a ratio that is consistent with results from in-situ airborne measurements. The improved detail provided by TROPOMI will likely enable the timely monitoring from space of methane emissions associated with oil and natural gas production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Limited increases in Arctic offshore oil and gas production with climate change and the implications for energy markets

Climate change impacts on sea ice thickness is opening access to offshore Arctic resources. The degree to which these resources are exploited will depend on sea-ice conditions, technology costs, international energy markets, and the regulatory environment. We use an integrated human-Earth system model, GCAM, to explore the effects of spatial–temporal patterns of sea-ice loss under climate change on future Arctic offshore oil and gas extraction, considering interactions with global energy markets and emission reduction scenarios. We find that under SSP5, a “fossil-fueled development” scenario, the effects of sea-ice loss are larger for Arctic offshore oil production than gas. Under SSP5, future extraction of Arctic offshore oil and gas through 2100 adds roughly 0.8–2.6 EJ/year to oil and gas markets but does not have large impacts on global oil and gas markets. Surprisingly, a low-carbon scenario results in greater Arctic offshore oil production to offset the more emissions-intensive unconventional oil production.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

High performance polymers for oil and gas applications

Proper material selection has been one of the most important aspects in the design of chemical process equipment. In particular, the oil and gas industry has transitioned from using metals to non-metals (e.g. advanced and high performance polymeric materials) in most of their structural components, coatings, equipment parts, and the like. It is therefore imperative to understand the advantages and limitations of these polymer materials before they can be effectively used for a specific application. This review article aims to provide an overview of the properties, applications, and durability against reactivity and degradation of high performance polymers commonly used in the oil and gas industry. These include polysulfone, polyetherimide, polyphenylene sulfide, polyetheretherketone, fluoropolymers, and other high performance thermosets, elastomers, and polymer nanocomposites. Further, this article covers the current research efforts in improving the properties of high performance polymers and expanding their applications (including 3D printing or additive manufacturing) in the oil and gas industry.

36 MATERIALS SCIENCE↗