Search NASA⌕ Search

SEARCH · Search NASA

Results for “One”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Demonstration of Orbit Determination for the Lunar Reconnaissance Orbiter Using One-Way Laser Ranging Data

We used one-way laser ranging data from International Laser Ranging Service (ILRS) ground stations to NASA's Lunar Reconnaissance Orbiter (LRO) for a demonstration of orbit determination. In the one-way setup, the state of LRO and the parameters of the spacecraft and all involved ground station clocks must be estimated simultaneously. This setup introduces many correlated parameters that are resolved by using a priori constraints. More over the observation data coverage and errors accumulating from the dynamical and the clock modeling limit the maximum arc length. The objective of this paper is to investigate the effect of the arc length, the dynamical and modeling accuracy and the observation data coverage on the accuracy of the results. We analyzed multiple arcs using lengths of 2 and 7 days during a one-week period in Science Mission phase 02 (SM02,November2010) and compared the trajectories, the post-fit measurement residuals and the estimated clock parameters. We further incorporated simultaneous passes from multiple stations within the observation data to investigate the expected improvement in positioning. The estimated trajectories were compared to the nominal LRO trajectory and the clock parameters (offset, rate and aging) to the results found in the literature. Arcs estimated with one-way ranging data had differences of 5-30 m compared to the nominal LRO trajectory. While the estimated LRO clock rates agreed closely with the a priori constraints, the aging parameters absorbed clock modeling errors with increasing clock arc length. Because of high correlations between the different ground station clocks and due to limited clock modeling accuracy, their differences only agreed at the order of magnitude with the literature. We found that the incorporation of simultaneous passes requires improved modeling in particular to enable the expected improvement in positioning. We found that gaps in the observation data coverage over 12h (approximately equals 6 successive LRO orbits) prevented the successful estimation of arcs with lengths shorter or longer than 2 or 7 days with our given modeling.

Bauer, S.↗

Kepler Planet Detection Metrics: Window and One-Sigma Depth Functions for Data Release 25

This document describes the window and one-sigma depth functions relevant to the Transiting Planet Search (TPS) algorithm in the Kepler pipeline (Jenkins 2002; Jenkins et al. 2017). The window function specifies the fraction of unique orbital ephemeris epochs over which three transits are observable as a function of orbital period. In this context, the epoch and orbital period, together, comprise the ephemeris of an orbiting companion, and ephemerides with the same period are considered equivalent if their epochs differ by an integer multiple of the period. The one-sigma depth function specifies the depth of a signal (in ppm) for a given light curve that results in a one-sigma detection of a transit signature as a function of orbital period when averaged over all unique orbital ephemerides. These planet detection metrics quantify the ability of TPS to detect a transiting planet signature on a star-by-star basis. They are uniquely applicable to a specific Kepler data release, since they are dependent on the details of the light curves searched and the functionality of the TPS algorithm used to perform the search. This document describes the window and one-sigma depth functions relevant to Kepler Data Release 25 (DR25), where the data were processed (Thompson et al. 2016) and searched (Twicken et al. 2016) with the SOC 9.3 pipeline. In Section 4, we describe significant differences from those reported in Kepler Data Release 24 (Burke Seader 2016) and document our verification method.

Planet Detection Metrics↗

The NASA Twins Study: The Effect of One Year in Space on Long-Chain Fatty Acid Desaturases and Elongases

Background: To date, there is no clear understanding of the effect of long-duration spaceflight on the major enzymes that govern the metabolism of omega-6 and omega-3 fatty acids. To address this gap in knowledge, we used data from the NASA Twins Study, which includes a multi-scale omic investigation of the changes that occurred during a year-long (340 days) human spaceflight. Embedded within the NASA Twins data are specific analytes associated with fatty acid metabolism. Objectives: To examine the long-chain fatty acid desaturases and elongases in a single human during one year in space. Method: One male twin was on board the International Space Station (ISS) for one year, while his monozygotic twin served as a genetically matched ground control. Longitudinal assessments included the genome, epigenome, transcriptome, proteome, metabolome, microbiome, and immunome during the mission, as well as six months before and after. The gene-specific fatty acid desaturase and elongase transcriptome data (FADS1, FADS2, ELOVL2 and ELOVL5) were extracted from untargeted RNA-seq measurements derived from white blood cell fractions. Results: Most data from the elongases and desaturases exhibited relatively similar expression profiles (R2>0.6) over time for the CD8, CD19, and LD cell fractions, indicating overall conservation of function within and between the subjects. Both cell-type and temporal specificity was observed in some cases, and some differences were also apparent between the poly-adenylated fraction (polyA) of processed RNAs vs. the ribo-depleted (ribo-) fraction. The flight subject showed a stronger enrichment of the Fatty Acid Metabolic processes pathway across almost all cell types (columns, CD4, CD8, CPT, LD), most especially in the ribodepleted fraction of RNA, but also with the polyA+ fraction of RNA. GSEA enrichment measures across three related Fatty Acid Metabolism pathways showed a differential between the ground and flight subject. Conclusions: There appears to be no persistent alteration of desaturase and elongase gene expression associated with one year in space. However, these data provide evidence that cellular lipid metabolism can be responsive and dynamic to spaceflight, even though it appears cell-type- and context-specific, most notably in terms of the fraction of RNA measured and the collection protocols. These results also provide new evidence of mid-flight spikes in expression of selected genes, which may indicate transient responses to specific insults during spaceflight.

Elongase↗

NASA Space Communications and Navigation: One Network Evolution

The NASA Space Communications and Navigation (SCaN) Program is responsible for providing the essential connectivity to robotic and human space explorers. The missions relying on SCaN range from suborbital and balloon missions to those traveling beyond the edge of the solar system. The demands for communications and navigation services enabled by SCaN (and its affiliated partners) are projected to increase and outpace the current network capacity. At the same time, the Agency finds itself surrounded by a burgeoning commercial space marketplace, technological advancement, and other government agencies that share common interests in space resiliency, robustness, and performance. As a result, SCaN has begun pivoting toward commercial services and collaborating with partners to close capacity and capability gaps. Given these growing demands of the Agency there is increasing need for multi-network solutions. Future mission concepts will rely on both government and commercial capabilities, both Near Space Network capacity and Deep Space Network capacity. Integrating these diverse support services together from a technical, programmatic and implementation standpoint will be key to meet the growing needs of the future. To accomplish this, a more substantive shift is required, and SCaN is reshaping itself to be a customer-centric, service-oriented, high-performance leader in the space communications community. This paper outlines the SCaN One Team, One Mission, One Network approach, and provides a vision for future mission community experience that includes streamlined mission commitment interfaces and clear processes, dynamic network scheduling and load balancing, and higher efficiency data transport and delivery through the integration of cloud infrastructure and services.

Near Space Network↗

Davidon-Broyden rank-one minimization methods in Hilbert space with application to optimal control problems

The Davidon-Broyden class of rank one, quasi-Newton minimization methods is extended from Euclidean spaces to infinite-dimensional, real Hilbert spaces. For several techniques of choosing the step size, conditions are found which assure convergence of the associated iterates to the location of the minimum of a positive definite quadratic functional. For those techniques, convergence is achieved without the problem of the computation of a one-dimensional minimum at each iteration. The application of this class of minimization methods for the direct computation of the solution of an optimal control problem is outlined. The performance of various members of the class are compared by solving a sample optimal control problem. Finally, the sample problem is solved by other known gradient methods, and the results are compared with those obtained with the rank one quasi-Newton methods.

Straeter, T. A.↗

A one way Doppler tracking system for satellite to satellite tracking

An S-band tracking system employing one way Doppler applicable to the tracking and data relay system (TDRS) was evaluated. This evaluation is limited to the measurement system parameters. The analysis assumes state-of-the-art components such as spacecraft oscillator long term stability of one part in 10 to the 8th power and ground station oscillator stability of one part in 10 to the 11th power. Signal characteristics comparable with the present ranging systems are utilized in the analysis. Predicated upon measurement system parameters, position uncertainties for the low orbiting spacecraft vary from 5 meters to 2 kilometers along track, 4 meters to 1 kilometer cross track, and 1 meter to 180 meters radially depending upon the tracking geometry and the high satellite position and velocity error assumptions.

Bryan, J. W.↗

One-dimensional numerical analysis of the transient thermal response of multilayer insulative systems

A one-dimensional numerical analysis of the transient thermal response of multilayer insulative systems has been developed. The analysis can determine the temperature distribution through a system consisting of from one to four layers, one of which can be an air gap. Concentrated heat sinks at any interface can be included. The computer program based on the analysis will determine the thickness of a specified layer that will satisfy a temperature limit criterion at any point in the insulative system. The program will also automatically calculate the thickness at several points on a vehicle and determine total system mass.

Pittman, C. M.↗

Aerodynamic Characteristics of an A-4B Aircraft with Simulated and Actual Gunfire Damage to One Wing

The aerodynamic characteristics of a damaged McDonnell Douglas A-4B aircraft were studied in the Ames Research Center's 40- by 80-Foot Wind Tunnel. A standard fuselage and three different wings were used. The first wing tested was an undamaged one in which holes had been cut and detachable cover plates installed. Removal of one or more cover plates gave one of fourteen different simulated damage cases. The other two wings tested were damaged by actual gunfire at an Air Force range.

Betzina, M. D.↗

One-man electrochemical air revitalization system evaluation

A program to evaluate the performance of a one man capacity, self contained electrochemical air revitalization system was successfully completed. The technology readiness of this concept was demonstrated by characterizing the performance of this one man system over wide ranges in cabin atmospheric conditions. The electrochemical air revitalization system consists of a water vapor electrolysis module to generate oxygen from water vapor in the cabin air, and an electrochemical depolarized carbon dioxide concentrator module to remove carbon dioxide from the cabin air. A control/monitor instrumentation package that uses the electrochemical depolarized concentrator module power generated to partially offset the water vapor electrolysis module power requirements and various structural fluid routing components are also part of the system. The system was designed to meet the one man metabolic oxygen generation and carbon dioxide removal requirements, thereby controlling cabin partial pressure of oxygen at 22 kN/sq m and cabin pressure of carbon dioxide at 400 N/sq m over a wide range in cabin air relative humidity conditions.

Schbert, F. H.↗

Numerical method for solution of systems of non-stationary spatially one-dimensional nonlinear differential equations

A computational scheme and a standard program is proposed for solving systems of nonstationary spatially one-dimensional nonlinear differential equations using Newton's method. The proposed scheme is universal in its applicability and its reduces to a minimum the work of programming. The program is written in the FORTRAN language and can be used without change on electronic computers of type YeS and BESM-6. The standard program described permits the identification of nonstationary (or stationary) solutions to systems of spatially one-dimensional nonlinear (or linear) partial differential equations. The proposed method may be used to solve a series of geophysical problems which take chemical reactions, diffusion, and heat conductivity into account, to evaluate nonstationary thermal fields in two-dimensional structures when in one of the geometrical directions it can take a small number of discrete levels, and to solve problems in nonstationary gas dynamics.

Morozov, S. K.↗

Tropical sea surface temperature - An interactive one-dimensional atmosphere-ocean model

It is shown that the (cumulus) convective processes in the tropics may be described by a one-dimensional cloud model, while the near-surface ocean may similarly be described by a one-dimensional mixed-layer model. The coupling is achieved through a sea surface flux budget combined with the flux parameterizations implied by Monin-Obukhov similarity theory. The coupled one-dimensional atmosphere-ocean model is applied to the equilibrium situation in which all temperatures reach a steady state. For the ocean, the fluxes must vanish in equilibrium, but the atmosphere maintains a stable lapse rate by balancing cumulonimbus heating against net radiative cooling. All water precipitating from cumulonimbus clouds must have evaporated from the sea. It is shown that this equilibrium system is closed and determinable solely in terms of the solar constant.

Sarachik, E. S.↗

Effect of ice-albedo feedback on global sensitivity in a one-dimensional radiative-convective climate model

The feedback between the ice albedo and temperature is included in a one-dimensional radiative-convective climate model. The effect of this feedback on global sensitivity to changes in solar constant is studied for the current climate conditions. This ice-albedo feedback amplifies global sensitivity by 26 and 39%, respectively, for assumptions of fixed cloud altitude and fixed cloud temperature. The global sensitivity is not affected significantly if the latitudinal variations of mean solar zenith angle and cloud cover are included in the global model. The differences in global sensitivity between one-dimensional radiative-convective models and energy balance models are examined. It is shown that the models are in close agreement when the same feedback mechanisms are included. The one-dimensional radiative-convective model with ice-albedo feedback included is used to compute the equilibrium ice line as a function of solar constant.

Wang, W.-C.↗

One millimeter continuum observations of high redshift quasars

Upper limits to the one-millimeter continuum flux densities of the high redshift quasars B2 1225 + 31, Ton 490, and PHL 957 are presented. The upper limit to the power observed from these quasars at 1 mm is, on the average, one half of the observed power in the continuum at L-alpha. These observations are used to constrain the temperature of a hypothetical dust shell which reddens the quasar line and continuum emission by an extinction optical depth sufficient to account for the anomalously low L-alpha/H-alpha emission line ratio observed in each of these quasars. For the quasars studied, dust shell temperatures between 25 K and 50 to 95 K are prohibited by the present data. A dust shell at a temperature within this span reradiating all the power absorbed from the quasar ultraviolet continuum would produce a one-millimeter flux density greater than the measured upper limit. The average radius of the model dust shell cannot be between 70 kpc and 1 Mpc.

Ennis, D. J.↗

A rule for selecting analytical boundary conditions for the conservative quasi-one-dimensional nozzle flow equations

For the one-dimensional nozzle flow equations, the number of analytical boundary conditions that may be applied corresponds to the number of exterior characteristics reaching the boundary points. Since the slopes of the characteristics are the characteristic speeds u, u+c, and u-c, one concludes that two analytical boundary conditions are required at a subsonic inflow boundary and one at a subsonic outflow boundary. However, using this guideline alone can lead to nonunique solutions in subsonic cases. This paper presents a rule for selecting analytical boundary conditions for the dependent variables which will yield unique solutions if they exist.

Wornom, S. F.↗

Two-dimensional optical processing using one-dimensional input devices

Two-dimensional optical processing architectures that are implemented with one-dimensional input spatial light modulators are reviewed. The advanced state of the art of available one-dimensional devices and the flexibility that exists in the design of two-dimensional architectures with one-dimensional transducers leads to the implementation of the most powerful and versatile optical processors. Signal and image processing architectures of this type are discussed.

Psaltis, D.↗

Specification for wide channel bandwidth one-inch video tape

Standards and controls are established for the procurement of wide channel bandwidth one inch video magnetic recording tapes for Very Long Base Interferometer (VLBI) system applications. The Magnetic Tape Certification Facility (MTCF) currently maintains three specifications for the Quality Products List (QPL) and acceptance testing of magnetic tapes. NASA-TM-79724 is used for the QPL and acceptance testing of new analog tapes; NASA-TM-80599 is used for QPL and acceptance testing of new digital tapes; and NASA-TM-100702 is used for the QPL and acceptance testing of new IBM/IBM compatible 3480 magnetic tape cartridges. This specification will be used for the QPL and acceptance testing of new wide channel bandwidth one inch video magnetic recording tapes. The one inch video tapes used by the Jet Propulsion Lab., the Deep Space Network and the Haystack Observatory will be covered by this specification. These NASA stations will use the video tapes for their VLBI system applications. The VLBI system is used for the tracking of quasars and the support of interplanetary exploration.

Perry, Jimmy L.↗

Performance characteristics of a one-third-scale, vectorable ventral nozzle for SSTOVL aircraft

Several proposed configurations for supersonic short takeoff, vertical landing aircraft will require one or more ventral nozzles for lift and pitch control. The swivel nozzle is one possible ventral nozzle configuration. A swivel nozzle (approximately one-third scale) was built and tested on a generic model tailpipe. This nozzle was capable of vectoring the flow up to + or - 23 deg from the vertical position. Steady-state performance data were obtained at pressure ratios to 4.5, and pitot-pressure surveys of the nozzle exit plane were made. Two configurations were tested: the swivel nozzle with a square contour of the leading edge of the ventral duct inlet, and the same nozzle with a round leading edge contour. The swivel nozzle showed good performance overall, and the round-leading edge configuration showed an improvement in performance over the square-leading edge configuration.

Esker, Barbara S.↗

Performance characteristics of a one-third-scale, vectorable ventral nozzle for SSTOVL aircraft

Several proposed configurations for supersonic short takeoff, vertical landing aircraft will require one or more ventral nozzles for lift and pitch control. The swivel nozzle is one possible ventral nozzle configuration. A swivel nozzle (approximately one-third scale) was built and tested on a generic model tailpipe. This nozzle was capable of vectoring the flow up to + or - 23 deg from the vertical position. Steady-state performance data were obtained at pressure ratios to 4.5, and pitot-pressure surveys of the nozzle exit plane were made. Two configurations were tested: the swivel nozzle with a square contour of the leading edge of the ventral duct inlet, and the same nozzle with a round leading edge contour. The swivel nozzle showed good performance overall, and the round-leading-edge configuration showed an improvement in performance over the square-leading-edge configuration.

Esker, Barbara S.↗