Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

MeV-scale performance of water-based and pure liquid scintillator detectors

This paper presents studies of the performance of water-based liquid scintillators (WbLS) in both 1-kt and 50-kt detectors. In this work, performance is evaluated in comparison to both pure water Cherenkov detectors and a nominal model for pure scintillator detectors. Performance metrics include energy, vertex, and angular resolution, along with a metric for the ability to separate the Cherenkov from the scintillation signal as being representative of various particle identification capabilities that depend on the Cherenkov/scintillation ratio. We also modify the time profile of scintillation light to study the same performance metrics as a function of rise and decay time. We go on to interpret these results in terms of their impact on certain physics goals, such as solar neutrinos and the search for Majorana neutrinos. This work supports and validates previous results, and the assumptions made therein, and serves as a significant stepping stone to complete detector design studies by using a more detailed detector model and full reconstruction, with a primarily data-driven optical model, and fewer model assumptions. With this model, a high-coverage 50-kt detector achieves better than 10 (1)% precision on the flux of neutrinos from the Carbon-Nitrogen-Oxygen cycle with a water-based liquid scintillator (pure LS) target in five years of data taking. A 1-kt LS detector, with a conservative 50% fiducial volume of 0.5 kt, can achieve better than 5% detection. A liquid scintillator detector has sensitivity into the normal hierarchy region for Majorana neutrinos with half-life sensitivity of $T^{0νββ}_{1/2}$ > 1.4 × 10 28 years at 90% C.L. for 10 years of data taking with a Te-loaded target.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Energy-dependent optimization of the prompt fission neutron spectrum with CGMF

Throughout the course of FY21, significant effort was put into investigating models within the LANL developed Hauser-Feshbach fission fragment decay code, CGMF, to understand and potentially solve the long-standing challenge of a too-soft prompt fission neutron spectrum, PFNS. Several inputs and models to CGMF were investigated, including the discrete nuclear levels, the optical model potential, level densities, and the fission fragment initial conditions. Some of the global models within CGMF led to a slight hardening of the neutron spectrum—particularly the likely incomplete discrete levels in through which γ-rays decay—but none of the changes where large enough for the tail of the PFNS to reproduce experimental data. A significant hardening of the spectrum tail was observed when the fission fragment initial conditions were optimized based on their sensitivities to the PFNS data for thermal incident neutrons. In this way, the parameters for the CGMF mass and total kinetic energy distributions, along with the spin cutoff factor were adjusted to better reproduce the experimental PFNS measurements. This optimization hardened the tail of the PFNS slightly but led to unphysical mass distributions for the fission fragments before neutron emission. It was clear from the above that we do not expect to be able to produce an evaluation-quality PFNS with CGMF in the near future. Challenges at thermal will persist–and possibly worsen–with increasing incident energy, where more models are needed to completely describe the fission. Basic-science research funding exceeding the amount available and scope of our NCSP funds would be needed to tackle this decade-long challenge impacting many fission-fragment event generator. And, in fact, Amy Lovell won LDRD ECR funding to do so over the next few years. Therefore, we focused in FY22 on extending evaluation capabilities beyond thermal incident neutrons, to take into account the incident energy dependence of the PFNS and fission fragment initial condition distributions in CGMF. We chose to set up the evaluation methodology to perform PFNS evaluations with CGMF across incident-neutron energies, in order to have it readily available for future NCSP evaluations when the PFNS from CGMF has improved. In this report, we outline the evaluation methodology, along with the results of the optimization, including full model calculations with CGMF using the evaluated parameters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Four-dimensional dynamics of multirotational transition stimulated rotational Raman scattering in air

Stimulated rotational Raman scattering in air is a powerful parasitic process that degrades high intensity laser beams and pulses propagated over significant distances. Conversely, it is used beneficially in the context of Raman lasers. Through this inelastic scattering process, laser photons are converted to higher (anti-Stokes) or lower (Stokes) energies, according to rotational mode transitions in nitrogen and oxygen diatomic molecules. The full wave-mixing problem involves numerous frequencies, and it is consistently assumed that only one rotational mode contributes to the conversion process. We instead present a dynamic 4D multirotational model that is implemented in a parallelized manner within the Virtual Beamline++ optical modeling package allowing high-resolution 4D studies. We highlight the effect that spontaneous emission plays in large and small beam-width setups, even in the highly saturating regime. The weaker transition modes play a large role in the persistent dynamics and can lead to complex spatiotemporal coupling through nonlinear competition of the modes. We highlight how and why these weaker modes persist, how the size and shape of speckle patterns depends highly on the initial beam profile, and how weaker modes can transiently become stronger as a result of such competition.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Bifacial Vertical Testbed and Ground Irradiance Data in Golden, Colorado

This data was collected for Tonita et al., “Vertical bifacial photovoltaic system model validation: study with field data, various orientations, and latitudes,” for validation of optical models for vertically-oriented photovoltaics under high albedo. Ground irradiance data for vertical PV arrays modeling in agrivoltaics is also provided. The dataset is provided for further use or study as open source. For any questions on the dataset, email silvana.ovaitt@nlr.gov.

14 SOLAR ENERGY↗
DOE OSTI2026

Optimization and stabilization of Fermilab Booster using hybrid Bayesian/RL framework

PIPII project will raise Fermilab Booster intensity and ramp rate. Beam losses will limit average power and are hard to simulate. Presently, Booster uses operator-guided empirical tuning. This task is challenging due to high dimensionality, multiple objectives, critical safety constraints, and drifts. We developed a synergistic suite of Bayesian optimization (BO) and reinforcement learning (RL) tools to optimize and stabilize beam losses. First, active learning was used to build a rough model. Data was collected parasitically using two novel safety constraint types – nonlinear input space restrictions (based on optics model), and uncertainty constraints (to stop bad steps/beam aborts). We then applied online multi-objective BO with scalarized objectives and fitting to improve/rebalance losses, increasing safety margins by 25%. Using BO model as a safety veto, we tried several on/off-policy RL agents for long term stabilization; SAC had best performance. We found that adding contextual (state) information further improved performance, eventually integrating key knobs like linac phase and temperature into the parameter space. Long term testing is ongoing to enable operational use.

Kuklev, Nikita [Fermilab]↗
DOE OSTI2023

Uncertainty-quantified phenomenological optical potentials for single-nucleon scattering

Optical-model potentials (OMPs) continue to play a key role in nuclear reaction calculations. However, the uncertainty of phenomenological OMPs in widespread use—inherent to any parametric model trained on data—has not been fully characterized, and its impact on downstream users of OMPs remains unclear. Here we assign well-calibrated uncertainties for two representative global OMPs, those of Koning-Delaroche and Chapel Hill '89, using Markov-chain Monte Carlo for parameter inference. By comparing the canonical versions of these OMPs against the experimental data originally used to constrain them, we show how a lack of outlier rejection and a systematic underestimation of experimental uncertainties contributes to bias of, and overconfidence in, best-fit parameter values. Our updated, uncertainty-quantified versions of these OMPs address these issues and yield complete covariance information for potential parameters. Scattering predictions generated from our ensembles show improved performance both against the original training corpora of experimental data and against a new “test” corpus comprising many of the experimental single-nucleon scattering data collected over the last twenty years. Finally, we apply our uncertainty-quantified OMPs to two case studies of application-relevant cross sections. We conclude that, for many common applications of OMPs, including OMP uncertainty should become standard practice. Furthermore, to facilitate their immediate use, digital versions of our updated OMPs and related tools for forward uncertainty propagation are included as Supplemental Material.

150 ≤ A ≤ 189↗
DOE OSTI2025

Model of photoemission and framework for relating quantum efficiency to stoichiometry

Simulating the quantum efficiency (QE) from photocathodes used in accelerators and photoinjectors requires accounting for the properties of the photoemissive material, the optical properties, scattering coefficients, and doping concentrations of which are dependent upon the stoichiometry. We present a rapid and flexible optical model that can be used to investigate the consequences of changes in the dielectric properties and their impact on the QE through such factors as reflectivity and laser penetration depth. Differences in materials can then be characterized by changes to parameters used to evaluate the dielectric function in a Lorentz–Drude–Resonant model. A method to characterize data is motivated by the example of copper and vetted by application to an exact analytical model. The effects of changes in parameters describing the resonant terms, which aggregate in the visible and UV regions of the spectrum, are shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

System Advisor Model (SAM) Improvements for Emerging Solar Thermal Applications

The System Advisor Model (SAM) is an open-source tool developed by NREL to simulate the techno-economic performance of technologies like photovoltaics, solar thermal, wind, and geothermal. NREL has recently completed, active, and planned projects to improve the solar thermal models in SAM and its underlying code base to represent emerging component technologies, systems, and applications. This poster describes new capabilities in the SolarPILOT optical modeling tool, supercritical carbon dioxide (sCO2) power cycles, and solar industrial process heat.

14 SOLAR ENERGY↗
DOE OSTI2021

Reduction of the neutron imaginary potential off the stability line and its possible impact on neutron capture rates

The effect of the isovector imaginary optical potential has been studied experimentally by using the particle-evaporation technique for the 11 B + 48 Ca reaction with a 21.8 MeV 11 B beam. Spectra of neutron, proton, and α particles emitted from the neutron-rich compound nucleus 59 Mn have been measured and analyzed with traditional optical model potentials with their original parametrizations as well as with adjusted isovector imaginary components. It is shown that the isovector component of the imaginary potential is indispensable in the reproduction of proton and α-particle yields from this reaction and even needs to be enhanced compared with the suggestions of the original model parametrizations. Furthermore, this can lead to important consequences for astrophysical reaction-rate calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Optical galaxy cluster mock catalogs with realistic projection effects: Validations with the SDSS clusters

Galaxy clusters identified in optical imaging surveys suffer from projection effects: Physically unassociated galaxies along a cluster’s line of sight can be counted as its members and boost the observed richness (the number of cluster members). To model the impact of projection on cluster cosmology analyses, we apply a halo occupation distribution model to 𝑁-body simulations to simulate the red galaxies contributing to cluster members, and we use the number of galaxies in a cylinder along the line of sight (counts in cylinders) to model the impact of projection on cluster richness. We compare three projection models: uniform, quadratic, and Gaussian, and we convert between them by matching their effective cylinder volumes. We validate our mock catalogs using SDSS redMaPPer clusters’ data vectors, including counts vs richness, stacked lensing signal, spectroscopic redshift distribution of member galaxies, and richness remeasured on a redshift grid. We find the former two are insensitive to the projection model, while the latter two favor a quadratic projection model with a width of ≈180 ℎ −1 Mpc (equivalent to the volume of a uniform model with a width of 100 ℎ −1 Mpc and a Gaussian model with a width of 110 ℎ −1 Mpc, or a Gaussian redshift error of 0.04). Furthermore, our framework provides an efficient and flexible way to model optical cluster data vectors, paving the way for a simulation-based joint analysis for clusters, galaxies, and shear.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Properties of isoscalar giant multipole resonances in medium-heavy closed-shell nuclei: A semimicroscopic description

The semimicroscopic particle-hole dispersive optical model (PHDOM) is implemented to describe main properties of Isoscalar Giant Multipole Resonances (up to L=3) in medium-heavy closed-shell nuclei. Here, the main properties are characterized by the strength distribution, transition density, partial and total probabilities of direct one-nucleon decay. Calculation results obtained for the 208 Pb nucleus are compared with available experimental data.

190 ≤ A ≤ 219↗
DOE OSTI2021

High-Brightness Ultraviolet Lasers for Leap-Ahead National Security Applications

In this project we endeavored to improve the state-of-the-art in UV lasers diodes. We made important advancements in several fronts from modeling, to epitaxial growth, to fabrication, and testing. Throughout the project it became clear that polarization doping would be able to help advance the state of laser diode design in terms of electrical performance, but the optical design would need to be investigated to ensure that a 2D guided mode would be supported. New capability in optical modeling using commercial software demonstrated that the new polarization doped structures would be viable. New capability in pulsed testing was established to reach the current and voltage required. Our fabricated devices had some parasitic electrical paths which hindered performance that we were ultimately unable to overcome in the project timeframe. We do believe that future projects will be able to leverage the advancements made under this project.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantum simulation of an extended Dicke model with a magnetic solid

Abstract The Dicke model describes the cooperative interaction of an ensemble of two-level atoms with a single-mode photonic field and exhibits a quantum phase transition as a function of light–matter coupling strength. Extending this model by incorporating short-range atom–atom interactions makes the problem intractable but is expected to produce new physical phenomena and phases. Here, we simulate such an extended Dicke model using a crystal of ErFeO 3 , where the role of atoms (photons) is played by Er 3+ spins (Fe 3+ magnons). Through terahertz spectroscopy and magnetocaloric effect measurements as a function of temperature and magnetic field, we demonstrated the existence of a novel atomically ordered phase in addition to the superradiant and normal phases that are expected from the standard Dicke model. Further, we elucidated the nature of the phase boundaries in the temperature–magnetic-field phase diagram, identifying both first-order and second-order phase transitions. These results lay the foundation for studying multiatomic quantum optics models using well-characterized many-body solid-state systems.

Marquez Peraca, Nicolas↗
DOE OSTI2023

Semimicroscopic description of isoscalar giant multipole resonances in medium-mass closed-shell nuclei

Main properties of isoscalar giant multipole resonances (up to L=3), including L=0,and 2 overtones, in medium-mass closed-shell nuclei are described within the semimicroscopic particle-hole dispersive optical model. Further, main properties are characterized by the energy-averaged strength distribution, projected (one-body) transition density, and probabilities of direct one-nucleon decay. Calculation results obtained for characteristics of the mentioned resonances in the 48 Ca, 90 Zr, and 132 Sn nuclei are compared with available experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Mechanism of Mesoscale Woodpile Development via Photoelectrochemical Deposition of Se–Te

A combination of experiments and optical modeling provided insight into the mechanism of mesoscale woodpile formation in response to an orthogonal shift in polarization during photoelectrochemical deposition of Se–Te. Cathodic deposition of semiconducting Se–Te using spatially uniform, linearly polarized illumination produced arrays of lamellae that were aligned parallel to the optical E-field oscillation. Continued deposition in conjunction with an orthogonal shift in the polarization direction then produced aligned bridging features that spanned the void space between, and were orthogonal to, the preexisting lamellae. The height and pitch, respectively, in each layer of the woodpile were a function of the charge density and illumination wavelength during deposition. A Monte Carlo model, in which material addition was scaled by the absorption magnitude obtained from electromagnetic simulations, produced morphologies that were nominally identical to those observed experimentally. Here, the formation of mesoscale woodpiles is consistent with a mechanism that involves a series of spontaneously initiated, concerted light–matter interactions during the photoelectrochemical deposition process.

absorption↗
DOE OSTI2022

Wildfire Smoke Demonstrates Significant and Predictable Black Carbon Light Absorption Enhancements

Abstract Black carbon (BC) is estimated to have the second largest anthropogenic radiative forcing in earth‐systems models (ESMs), but there is significant uncertainty in its impact due to complex mixing with organics. Laboratory‐generated particles show that co‐mixed non‐absorbing material enhances absorption by BC by a factor of 2–3.5 as predicted by optical models. However, weak or no enhancements are often reported for field studies. The cause of lower‐than‐expected absorption is not well understood and implies a lower radiative impact of BC compared to how many ESMs currently treat aerosols. By analyzing BC aerosol particle‐by‐particle we reconcile observed and expected absorption for ambient smoke plumes varying in geographic origin, fuel types, burn conditions, atmospheric age and transport. Although particle‐by‐particle tracking is computationally prohibitive for sophisticated ESMs we show that realistic BC absorption is reliably estimated by bulk properties of the plume providing a suitable parameterization to constrain black carbon radiative forcing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Bayesian analysis of the Zn 70 ( d , He 3 ) Cu 69 transfer reaction

Transfer reactions provide information about the single-particle nature of nuclear levels. In particular, the differential cross sections from these measurements are sensitive to the angular momentum of the transferred particle and the spectroscopic factor of the populated level. However, the process of extracting these properties is subject to uncertainties, both from experimental and theoretical sources. By integrating the distorted wave Born approximation into a Bayesian model, we propagate these uncertainties through to the spectroscopic factors and orbital angular momentum values. We use previously reported data of the proton pickup reaction Zn 70 ( d , He 3 ) Cu 69 as an example. By accounting for uncertainties in the experimental data, optical model parameters, and reaction mechanism, we find that the extracted spectroscopic factors for low-lying states of 69 Cu are subject to large, asymmetric uncertainties ranging from 35 to 108%. Additionally, Bayesian model comparison is employed to assign probabilities to each of the allowed angular momentum transfers. This method confirms the assignments for many states, but suggests that the data for a state lying at 3.70 MeV are better characterized by an ℓ =3 transfer, rather than the previously reported ℓ =2 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Bulk Spray and Individual Plume Characterization of LPG and Iso-Octane Sprays at Engine-Like Conditions

This study presents experimental and numerical examination of directly injected (DI) propane and iso-octane, surrogates for liquified petroleum gas (LPG) and gasoline, respectively, at various engine like conditions with the overall objective to establish the baseline with regards to fuel delivery required for future high efficiency DI-LPG fueled heavy-duty engines. Sprays for both iso-octane and propane were characterized and the results from the optical diagnostic techniques including high-speed Schlieren and planar Mie scattering imaging were applied to differentiate the liquid-phase regions and the bulk spray phenomenon from single plume behaviors. The experimental results, coupled with high-fidelity internal nozzle-flow simulations were then used to define best practices in CFD Lagrangian spray models. Optical imaging revealed that unlike iso-octane, propane’s spray propagation was fed by its flash boiling, spray collapse, and high degree of vaporization, resulting in a direct proportionality of propane’s penetration length to temperature. These unique features of propane and its variation from iso-octane’s spray pattern, contributed to its classification as an unconventional spray. Appropriate corrections to the injection and breakup models were developed to reproduce the under-expanded jet dynamics and to mimic the flash boiling-driven spray development observed with propane sprays. The simulation results were found to be sensitive to cone and inclusion angles of the blob injector. The current work represents a first assessment of the capability of the commonly available models for engine-spray simulations and highlights the fact that, despite the reasonable agreement obtained in the fuel vapor morphology, the representation of the liquid phase lacks accuracy and requires further model development.

02 PETROLEUM↗