Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optimized electrodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Revealing nanomechanical deformation at the interface and degradation in all-thin-film inorganic electrochromic devices

Recently, progress in electrochromic (EC) devices has been made in optimizing electrode and device configurations and performance. However, the ion insertion/de-insertion induced charge transfer (CT) nanomechanical effect has remained unexplored, i.e., repetitive electrode size changes at the nanoscale and stress/strain generated during electrochemical cycling, which is the focus of this work due to its intimate correlation with the elastic and plastic deformation at the interface. Considering the intervalence electrons, excellent electrochemical kinetics, and dramatic color changes, tungsten oxide (WO 3 ) and nickel oxide (NiO) films are configured as the EC cathode and anode materials, respectively, within a full device. Upon extended cycles (>10 000), the void generation and delamination that occurred at the interface account for performance decay. Encouraged by the findings, nanoindentation mechanical tests and electrical kelvin probe force microscopy were employed to investigate the CT induced effects at the interface. There is a dramatic increase of up to 45% in the elastic Young's modulus in colored/charged WO 3 at ~40 mC cm -2 . Here, the correlation between CT and synergistic mechanical effect is interpreted by the Lippman equation. Interestingly, despite the charged state (colored; lithiated) with a relatively flat morphology bringing an ~3.4 times higher electrostatic surface potential, the electrical work function unexpectedly decreases, arising from the dominant effect of the dipole layer potential over the chemical potential. The interatomic cohesive energy and equilibrium distance increase bury the seeds for mechanical deformation in the long run. This work provides fundamental insights into electro-chemo mechanics and interdisciplinary concerted interfacial effects at the nano/atomic level. The dependence of surface potential, stress, work function, and cohesive energy on electrochemical kinetics has been interpreted.

36 MATERIALS SCIENCE↗

Microstructure of V-based ohmic contacts to AlGaN/GaN heterostructures at a reduced annealing temperature

Ohmic contacts with V/Al/Ni/Au and V/Ni/Au metalization schemes were deposited on AlGaN/GaN heterostructures. The dependence of the specific contact resistance on the annealing conditions and the V:Al thickness ratio was shown. For an optimized electrode stack, a low specific contact resistance of 8.9 × 10{sup −6} Ω cm{sup 2} was achieved at an annealing temperature of 650 °C. Compared to the conventional Ti/Al/Ni/Au contact, this is a reduction of 150 K. The microstructure and contact formation at the AlGaN/metal interface were investigated by transmission electron microscopy including high-resolution micrographs and energy dispersive X-ray analysis. It was shown that for low-resistive contacts, the resistivity of the metalization has to be taken into account. The V:Al thickness ratio has an impact on the formation of different intermetallic phases and thus is crucial for establishing ohmic contacts at reduced annealing temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determining Proton Transport in Pseudo Catalyst Layers Using Hydrogen Pump DC and AC Techniques

Optimizing electrode morphology with a more uniform ionomer distribution is key to reducing ohmic losses and increasing electrocatalyst utilization in polymer electrolyte fuel cells (PEFCs). Inherent ionomer conductivity, volume fraction and tortuosity determine effective ionic conductivity. We use hydrogen pump (HP) method to measure effective ionic conductivity of a pseudo catalyst layer (PCL) comprised of Vulcan XC-72 carbon black and 3M 825 EW ionomer with ionomer to carbon (I/C) ratios of 0.6, 1 and 1.4 and relative humidity (RH) range of 50 to 120%. These direct current (DC) experiments are then compared with electrochemical impedance spectroscopy (EIS). Both DC and EIS methods show good agreement, indicating that EIS can be used as an alternative to DC method in HP experiment. Ionic conductivity for PCL with I/C of 1 and 1.4 was found to be about one order of magnitude higher than I/C of 0.6 for most of the RH range. At 90% RH tortuosities for I/C = 1 and 1.4 were close to 1, whereas tortuosity for I/C = 0.6 was 3. With decrease in relative humidity tortuosities increased linearly and at 50% relative humidity a PCL with I/C = 0.6 had the highest tortuosity of 6.1.

25 ENERGY STORAGE↗

Rechargeable Micro-Batteries

The quest for efficient power sources for small sensors has led to a growing interest in rechargeable micro-batteries, offering the potential to harness energy from various sources for extended periods. This project delves into a multifaceted project aimed at enhancing the performance and viability of rechargeable micro-batteries in this context. The Pacific Northwest National Laboratory (PNNL) has leveraged its expertise in primary micro-battery development, evolving into a software-driven approach for designing cylindrical micro-batteries. This project addresses the cycle life issue through innovative cell design, electrode optimization, and electrolyte refinement. A case study of the MB1842 rechargeable micro-battery demonstrates the promising outcomes of these advancements, showcasing a capacity of 0.32 mAh at ~1C (0.35 mA) and remarkable cycle performance, extending the cycle life to 510-570 cycles at 80% end-of-life (EOL), 710-760 cycles at 70% EOL and 840-940 cycles at 60% EOL, thereby ensuring a service life of 10 years for these rechargeable micro-batteries. This endeavor represents a significant stride towards unlocking the full potential of rechargeable micro-batteries, paving the way for their widespread application in small sensor technologies. The outcome from this project also successfully supports the award of a new project: 80621 - Self-Powered Modular Acoustic Telemetry System with Sensing.

25 ENERGY STORAGE↗

Advanced Anion Exchange Membranes with Tunable Water Transport for PGM-Free AEMFCs

This project advanced the synthesis, characterization, and testing of anion exchange membranes for use in fuel cells. Our goal was to improve the water transport in anion exchange membrane fuel cells to improve their performance and durability. Through the work in this project we: 1) developed new composite anion exchange membranes through polymer synthesis and membrane casting into mechanical supports; 2) optimized electrode architecture and cell conditions to achieve; 3) demonstrated an integrated approach to achieving over 1 W/cm 2 in an operating device. While we did not achieve 1000 hours of continuous operation, we demonstrated multiple runs of more than 300 hours of device performance at steady-state.

08 HYDROGEN↗

Electrochemical Oxidation of Seawater for Renewable Energy Generation and Storage in Coastal Areas

In this work, we demonstrated how the Clean Sustainable Electrochemical Treatment process can be used to process seawater while simultaneously generating molecular hydrogen. The specific goal of this project is to (1) demonstrate selective removal of chemical oxygen demand over the oxygen and chlorine evolution reactions, (2) optimize electrode composition to improve electrochemical performance, and (3) demonstrate long-term (>100 h) stability experiments.

08 HYDROGEN↗

Durable, Ultra-Thin Diaphragms for Liquid Alkaline Water Electrolysis

W. L. Gore & Associates assembled a world class team (De Nora Tech, LLC; New York University; and thyssenkrupp nucera) to develop durable, ultra-low resistance diaphragms that dramatically improve system efficiency, dynamic response, and operational flexibility. To enable the use of ultra-thin diaphragms, an optimized electrode package was chosen as part of an electrode down select study. Ultra-thin diaphragms based on microporous polymer scaffolds imbibed with zirconia nanoparticles were developed and tested. Performance and durability on par with incumbent materials was demonstrated. A transparent electrolyzer to directly observe in-situ diaphragm-bubble interactions was designed and built, and simultaneous optical and electrochemical performance tests were performed. A Pressurized Alkaline Water Electrolysis (PAWE) single cell test station was designed to support advanced R&D in high-pressure electrolysis, particularly for evaluating novel electrode and separator configurations under elevated temperature and pressure operating conditions. Due to early project termination, the original scope could not be fully achieved.

08 HYDROGEN↗

Designing Low Tortuosity Electrodes through Pattern Optimization for Fast-Charging

The development of fast-charging technologies is crucial for expediting the progress and promotion of electric vehicles. In addition to innovative material exploration, reduction in the tortuosity of electrodes is a favored strategy to enhance the fast-charging capability of lithium-ion batteries by optimizing the ion-transfer kinetics. To realize the industrialization of low-tortuosity electrodes, a facile, cost-effective, highly controlled, and high-output continuous additive manufacturing roll-to-roll screen printing technology is proposed to render customized vertical channels within electrodes. Extremely precise vertical channels are fabricated by applying the as-developed inks, using LiNi 0.6 Mn 0.2 Co 0.2 O 2 as the cathode material. Additionally, the relationship between the electrochemical properties and architecture of the channels, including the pattern, channel diameter, and edge distance between channels, is revealed. The optimized screen-printed electrode exhibited a seven-fold higher charge capacity (72 mAh g -1 ) at a current rate of 6 C and superior stability compared with that of the conventional bar-coated electrode (10 mAh g -1 , 6 C) at a mass loading of 10 mg cm -2 . Finally, this roll-to-roll additive manufacturing can potentially be applied to various active materials printing to reduce electrode tortuosity and enable fast charging in battery manufacturing.

42 ENGINEERING↗

Process Optimization of Carbon Electrode Materials Manufacturing by Experimental Study and Machine Learning Techniques

Electrospun carbon fibers from coal have been investigated as electrodes for batteries and supercapacitors. Despite the excellent properties of coal-derived carbon fibers (CCNF) for energy storage devices, there still lacks systematic understanding on how various process parameters affect final electrode performances, which poses challenges to scale from pilot to high volume manufacturing. The goals of this project are twofold. First, we focuse on process optimization for converting a new precursor from powder river basin (PRB) coal, referred to as coal-based polyurethane (CPU) to CCNF using electrospinning. Second, different machine learning techniques will be examined using experimental data from this work and open literature. Specifically, for CPU the following process parameters need to be characterized and optimized in order to produce CCNFs with desirable mechanical integrity and physiochemical properties: precursor composition and viscosity, operating voltage and distance, oxidation and carbonization temperature and duration. Consequently, physiochemical properties of the fibers were characterized to correlate these process parameters with desirable electrochemical performance. Given the complex nature of the fiber production process, ML models are assessed for their ability to capture the nonlinear relationship between process parameters and the electrochemical properties in applications including supercapacitors. As such, we applied various machine learning techniques, to determine which technique produces a model that best predicts device function.

Cincotta, Robert E.F.↗

Self-Adhesive Ionomers for Alkaline Electrolysis: Optimized Hydrogen Evolution Electrode

Hydrogen produced through low-temperature water electrolysis using anion exchange membranes (AEM) combines the benefits of liquid-electrolyte alkaline electrolysis and solid-polymer proton exchange membrane electrolysis. The anion conductive ionomers in the oxygen-producing anode and hydrogen-producing cathode are a critical part of the three-dimensional electrodes. The ionomer in the hydrogen-producing cathode facilitates hydroxide ion conduction from the cathode catalyst to the anode catalyst, and water transport from the anode to the cathode catalyst through the AEM. This ionomer also binds the catalyst particles to the porous transport layer. Here in this study, the cathode durability was improved by use of a self-adhesive cathode ionomer to chemically bond the cathode catalyst particles to the porous transport layer. It was found that the cathode ionomers with high ion exchange capacity (IEC) were more effective than low IEC ionomers because of the need to transport water to the cathode catalyst and transport hydroxide away from the cathode. The cathode durability was improved by using ionomers which were soluble in the spray-coated cathode ink. Optimization of the catalyst and ionomer content within the cathode led to electrolysis cells which were both mechanically durable and operated at low voltage.

08 HYDROGEN↗

Optimization of Oxygen Electrode Combined with Soluble Catalyst to Enhance the Performance of Lithium-Oxygen Battery

Lithium-air batteries possess a high theoretical energy density among the current battery technologies, and are expected to become the driving power for electric vehicles. However, the practical application of lithium air batteries is handicapped by their poor cycle life, high over-charge potential and low energy efficiency. Numerous studies have performed to improve the kinetics of the electrochemical reaction. Making a good oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalyst system is under intense scrutiny. In this work, we report a rational design of air electrode, which derives from biomass and presents a three-dimensional porous carbon architecture with high specific surface and large volume expansion coefficient. Combining with a soluble catalyst, this oxygen electrode presents an ultrahigh areal specific capacity of 7.95 mAh/cm 2 and a long cycling life up to 1000 cycles with suppressed polarization (about 0.46 V). Finally, the greatly improved overall performance is due to the synergetic effect of the novel designed oxygen electrode capable of mediating the redox mediators to trigger the ORR and OER process.

25 ENERGY STORAGE↗

Design Studies for a TPC Readout Plane Using Zigzag Patterns With Multistage GEM Detectors

Here, new design studies have been carried out for a readout plane for gas electron multiplier detectors using zigzag patterns that can significantly reduce the readout channel count while preserving excellent spatial resolution for tracking detectors. While zigzag patterns have been used in a number of applications, these studies were designed to investigate the fundamental limits of charge sharing between the electrodes to optimize the spatial resolution and minimize the nonuniformities across the readout plane, while exploring the limits of manufacturing capabilities for producing the readout board. Simulation studies were carried out to optimize the readout electrode structure, and readout boards were produced with similar zigzag designs that were tested in the laboratory using a scanning X-ray source. These studies were aimed at developing a readout board for the new time projection chamber for the sPHENIX experiment at relativistic heavy ion collider, but can readily be used in other applications, including various micropattern gas detectors, such as Micromegas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

AMTEC cell testing, optimization of rhodium/tungsten electrodes, and tests of other components

Electrodes, current collectors, ceramic to metal braze seals, and metallic components exposed to the high 'hot side' temperatures and sodium liquid and vapor environment have been tested and evaluated in laboratory cells running for hundreds of hours at 1100-1200 K. Rhodium/tungsten electrodes have been selected as the optimum electrodes based on performance parameters and durability. Current collectors have been evaluated under simulated and actual operating conditions. The microscopic effects of metal migration between electrode and current collector alloys as well as their thermal and electrical properties determined the suitability of current collector and lead materials. Braze seals suitable for long term application to AMTEC devices are being developed.

Williams, Roger M.↗

Extreme Fast Charging Lithium-Ion Batteries (Final Technical Report)

The objective of this research project is to develop, design, fabricate, and demonstrate lithium ion battery cells that optimize energy density, reduce cost, and demonstrate eXtreme Fast Charging (XFC) capabilities. The XFC capability of the cell will be determined by the final specific energy of the cell after completing 500 6C charge /1C discharge cycles. Over the first 18 months of the project, over 800 cells were produced in groups of 20 cells to determine the optimum configuration of following parameters to optimized XFC performance: (1) Graphite anode material optimization (2) Electrolyte and additive optimization (3) Electrode and cell design optimization. In the final 6 months of the project, over 200 optimized cells were produced that featured optimized parameters from each of the independent studies. The final optimized cells exhibited a final specific energy of 150 Wh/kg, meeting the DOE project goal, but failing to meet the initial specific energy requirement of 180 Wh/kg.

25 ENERGY STORAGE↗