Search NASA⌕ Search

SEARCH · Search NASA

Results for “Organic electrode materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Factors Defining the Intercalation Electrochemistry of CaFe 2 O 4 -Type Manganese Oxides

Oxides with the CaFe 2 O 4 -type structure have been predicted as being suitable hosts for reactions of intercalation of light cations such as Li and Mg because of their favorable cationic diffusion. Although Li has been shown to intercalate into the Mn 2 O 4 variant, the key structure property correlations determining function are not fully ascertained. This basic information is needed before attempting the intercalation of divalent cations, which face comparably higher migration barriers. For this purpose, here the electrode function of CaFe 2 O 4 -type Li 0.8 Mn 2 O 4 was compared for materials made by a direct high-pressure route or through cation exchange from NaMn 2 O 4 . X-ray diffraction and absorption spectroscopy revealed that, despite having largely the same bulk structure, the presence of surface defects blocked Li + transfer in Li 0.8 Mn 2 O 4 made at high pressure. These defects were not present in the cation-exchanged material, which resulted in highly reversible Li intercalation with very fast kinetics in micrometric crystals. Delithiated electrodes from the cation-exchange synthesis were subsequently reduced in an ionic liquid electrolyte containing Mg 2+ . The process induced topotactic changes in the bulk, strongly suggesting the existence of intercalation, but it is accompanied by severe reactivity with the electrolyte that impedes reversibility. This study uncovers that defects affect the fundamentals of cation intercalation in this novel class of materials. The ability of the cation-exchanged material to conduct fast reactions with Li is consistent with calculated activation energy barriers and creates promise for their use as Mg hosts, provided that novel electrolytes enhanced stability at high potential can be realized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Low-cost & Energy Dense Batteries for Transportation

The project sought to explore development of novel polymer separator materials and additives for Li-S and Li-ion batteries that would solve critical failure modes and performance bottlenecks for these chemistries. This technology presented significant advanced manufacturing challenges and opportunities in getting to scale, including materials synthesis scale-up, large-area polymer processing techniques, electrode formulation, and the development of coin and pouch cells for electrochemical energy storage. Specific accomplishments included synthesis of organic molecular and polymer materials designed to solve outstanding challenges in electrochemical cells. The primary focus of new materials design was aimed at improving longevity, power, cost reduction, and environmental sustainability of said electrochemical devices. The project also involved assembly and characterization of electrochemical devices with standard galvanostatic and potentiostatic techniques as well as electrochemical impedance spectroscopy.

25 ENERGY STORAGE↗
DOE OSTI2020

Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes

Layered Na-based oxides with the general composition of Na x TMO 2 (TM: transition metal) have attracted significant attention for their high compositional diversity that provides tunable electrochemical performance for electrodes in sodium-ion batteries. The various compositions bring forward complex structural chemistry that is decisive for the layered stacking structure, Na-ion conductivity, and the redox activity, potentially promising new avenues in functional material properties. In this work, we have explored the maximum Na content in P2-type layered oxides and discovered that the high-content Na in the host enhances the structural stability; moreover, it promotes the oxidation of low-valent cations to their high oxidation states (in this case Ni 2+ ). This can be rationalized by the increased hybridization of the O(2p)-TM(3d-e g *) states, affecting both the local TM environment as well as the interactions between the NaO 2 and TMO 2 layers. These properties are highly beneficial for the Na storage capabilities as required for cathode materials in sodium-ion batteries. It leads to excellent Na-ion mobility, a large storage capacity (>100 mAh g –1 between 2.0-4.0 V), yet preventing the detrimental sliding of the TMO 2 layers (P2–O2 structural transition), as reflected by the ultralong cycle life (3000 (dis)charge cycles demonstrated). These findings expand the horizons of high Na-content P2-type materials, providing new insights of the electronic and structural chemistry for advanced cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Progresses and Perspectives of All‐Iron Aqueous Redox Flow Batteries

Abstract Redox flow batteries (RFBs) are a promising option for long‐duration energy storage (LDES) due to their stability, scalability, and potential reversibility. However, solid‐state and non‐aqueous flow batteries have low safety and low conductivity, while aqueous systems using vanadium and zinc are expensive and have low power and energy densities, limiting their industrial application. An approach to lower capital cost and improve scalability is to utilize cheap Earth‐abundant metals such as iron (Fe). Nevertheless, all‐iron RFBs have many complications, involving voltage loss from ohmic resistance, side reactions such as hydrogen evolution, oxidation, and most significantly electrode plating, and dendrite growth. To address these issues, researchers have begun to examine the effects of various alterations to all‐iron RFBs, such as adding organic ligands to form Fe complexes and using a slurry electrode instead of common materials such as graphite or platinum rods. Overall, progress in improving aqueous all‐iron RFBs is at its infant stage, and new strategies must be introduced, such as the utilization of nanoparticles, which can limit dendrite growth while increasing storage capacity. This review provides an in‐depth overview of current research and offers perspectives on how to design the next generation of all‐iron aqueous RFBs.

Belongia, Shawn↗
DOE OSTI2020

Critical Practices in Rigorously Assessing the Inherent Activity of Nanoparticle Electrocatalysts

Accurate activity measurements for electrocatalytic materials are the backbone of impactful electrocatalyst research. Inherent to accurate measurements is the correct accounting of the active catalyst sites and the design of experiments to ensure that these sites are participating in the measured reaction. Improvements in electrocatalyst activity for fuel cell reactions (hydrogen oxidation and oxygen reduction) are essential for the widespread adoption of this carbon-neutral energy source. Activities for these half-reactions can be reported in a variety of ways including specific activities, mass activities, volumetric activities, and half-wave potentials. These values are traditionally measured with a rotating disk electrode (RDE) in which the electrocatalyst is supported on a porous active layer film attached to the RDE. To accurately measure electrocatalyst activity with an RDE, two major sources of errors must be addressed: (i) accurate electrochemical surface area (ECSA) quantification and (ii) fast diffusion of reactants through the active layer film. In this contribution, we first aim to detail through RDE experiments and mass transport modeling the potential errors that can be observed when these factors are not properly addressed. We then present recommendations and discuss techniques for properly constructing electrocatalyst thin films and characterizing the ECSA on monometallic and novel alloy electrocatalysts. These practices, when adopted, ensure greater confidence and reliability in reports of electrocatalyst activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Influence of Annealing Temperature on the OER Activity of NiO(111) Nanosheets Prepared via Microwave and Solvothermal Synthesis Approaches

Earth-abundant transition metal oxides are promising alternatives to precious metal oxides as electrocatalysts for the oxygen evolution reaction (OER) and are intensively investigated for alkaline water electrolysis. OER electrocatalysis, like most other catalytic reactions, is surface-initiated, and the catalyst performance is fundamentally determined by the surface properties. Most transition metal oxide catalysts show OER activities that depend on the predominantly exposed crystal facets/surface structure. Therefore, the design of synthetic strategies to obtain the most active crystal facets is of significant research interest. In this work, rock salt NiO OER catalysts with (111) predominantly exposed facets were synthesized by a solvothermal (ST) method either heated under supercritical or microwave-assisted (MW) conditions. Particular emphasis was placed on the influence of the post annealing temperature on the structural configuration and OER activity to compare their catalytic performances. The as-prepared electrocatalysts are pure α-Ni hydroxides which were converted to rock salt NiO (111) nanosheets with hexagonal pores after heat treatment at different temperatures. The OER activity of the electrodes has been evaluated in 0.1 M KOH using geometric and intrinsic current densities via normalization by the disk area and BET area, respectively. The lowest overpotential at a geometric current density of 10 mA/cm 2 is found for samples pretreated by heating between 400 and 500 °C with a catalyst loading of 115 μg/cm 2 . Despite the very similar nature of the catalysts obtained from the two methods, the ST electrodes show a higher geometric and intrinsic current density for 500 °C pretreatment. The MW electrodes, however, achieve an optimal geometric current density for 400 °C pretreatment, while their intrinsic current density requires pretreatment over 600 °C. Interestingly, pretreated electrodes show consistently higher OER activity as compared to the poorly crystalline/less ordered hydroxide as-prepared electrocatalysts. Thus, our study highlights the importance of the synthesis method and pretreatment at an optimal temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advancing the Performance of Lithium-Rich Oxides in Concert with Inherent Complexities: Domain-Selective Substitutions

Historically, modifications to Li- and Mn-rich (LMR) cathodes have been studied in relation to their efficacy in solving challenges such as oxygen loss and voltage fade, which are inherent to the activation process of these electrodes. However, even in the presence of these phenomena, well-optimized LMR cathodes show considerable promise as earth-abundant options, particularly if other barriers to implementation can be overcome or mitigated. As the complex mechanisms of LMR electrodes are known to stem from the local, chemical inhomogeneities that define the nanocomposite domain nature of these oxides, strategies aimed at manipulating the performance of activated electrodes, irrespective of voltage fade, through domain-selective modifications, could prove instructive. In this work, we use a novel synthesis process aimed at influencing the site occupancy of substituted Sn 4+ , as an example 4+ cation, into a Co-free Li 1.13 Mn 0.57(1–x) Sn 0.57x Ni 0.3 O 2 LMR oxide. We show that Sn 4+ can be selectively substituted into Li-rich environments. The consequences are revealed to be both chemical and morphological, and the domain-selective doping strategy provides a knob for directed control of the low state-of-charge impedance behavior. In conclusion, these results reveal new clues and insights with respect to further advancing the practical relevance of LMR cathode particles and electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Impact of ferromagnetic electrode length and thickness on Magnetic Tunnel Junction-Based Molecular Spintronic Devices (MTJMSD)

A knowledge gap exists about the impact of variation in length and thickness of ferromagnetic(FM) electrodes on molecular spintronics devices’ ability to manifest molecular coupling impact. Magnetic Tunnel Junction-Based Molecular Spintronic Devices (MTJMSDs) are potential candidates for inventing highly correlated materials and devices and investigating the fundamental science of organic spintronics. This paper reports our experi- mental observations providing the dramatic impact of variation in ferromagnetic electrode length and thickness on paramagnetic molecule-based MTJMSD. Room temperature transport studies were performed to investigate the effect of FM electrode thickness. On the other hand, magnetic force microscopy measurements were con- ducted to understand the effect of FM electrode length extending beyond the molecular junction area, i.e., the site where paramagnetic molecules bridged between two FM. In the strong molecular coupling regime, transport study suggested thickness variation caused ~1000 to million-fold differences in junction conductivity. MFM study revealed near-zero magnetic contrast for pillar-shaped MTJMSD without any extended FM electrode. However, MFM images showed a multitude of microscopic magnetic phases on cross junction shaped MTJMSD where FM electrodes extended beyond the junction area. To understand the intriguing experimental results, we conducted an in-depth theoretical study using Monte Carlo Simulation (MCS) approach. MCS study utilized a Heisenberg atomic model of cross junction shaped MTJMSD to gain insights about room temperature transport and MFM experimental observations of microscopic MTJMSD. To make this study applicable for a wide variety of MTJMSDs, we systematically studied the effect of variation in molecular coupling strength between magnetic molecules and ferromagnetic (FM) electrodes of various dimensions. Here, our theoretical results suggest 25 atoms thick FM electrode show very weak molecular coupling impact and of the same order of experimentally studied FM electrode dimensions showing weak effect. Also, MCS results agree with experimentally observed multiple magnetic phases on lengthy FM electrodes of an MTJMSD.

42 ENGINEERING↗
DOE OSTI2022

Spin injection by spin–charge coupling in proximity induced magnetic graphene

Abstract Within the field of spintronics major efforts are directed towards developing applications for spin-based transport devices made fully out of two-dimensional materials. In this work we present an experimental realization of a spin-valve device where the generation of the spin signal is exclusively attributed to the spin-dependent conductivity of the magnetic graphene resulting from the proximity of an interlayer antiferromagnet, chromium sulfide bromide (CrSBr). We clearly demonstrate that the usage of the conventional air-sensitive 3D magnetic contacts can be fully avoided when graphene/CrSBr heterostructures are employed. Moreover, apart from providing exceptionally long spin relaxation length, the usage of graphene for both generation and transport of the spin allows to automatically avoid the conductivity mismatch between the source and the channel circuits that has to be considered when using conventional low-resistive contacts. Our results address a necessary step in the engineering of spintronic circuitry out of layered materials and precede further developments in the area of complex spin-logic devices. Moreover, we introduce a fabrication procedure where we designed and implemented a recipe for the preparation of electrodes via a damage-free technique that offers an immediate advantage in the fields of air-sensitive and delicate organic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Scalable and Highly-Efficient Microbial Electrochemical Reactor for Hydrogen Generation from Wastes

The overall goal of this project was to develop a scalable and highly efficient hybrid microbial electrochemical reactor for hydrogen recovery from waste streams at a cost of less than $\$$2/kg H₂. The specific objectives were: (1) to design and fabricate a scalable and highly efficient microbial electrochemical cell (MEC) reactor, and (2) to determine the techno-economic feasibility of the system for H₂ generation from organic-rich waste streams. We achieved the first objective by (a) developing low-cost electrode materials, (b) synthesizing a highly efficient cathode catalyst in a scalable manner, (c) evaluating and validating the developed electrode material and catalyst in MEC reactors, and (d) designing and fabricating a larger reactor that incorporates (a) to (c). We met the second objective by (a) identifying the impacts of wastewater composition and operational conditions on H₂ production, and (b) developing a cost-performance model that identified critical parameters affecting the system's performance and cost, providing a pathway for further improvement.

08 HYDROGEN↗
DOE OSTI2023

Utilizing Conjugated Imine Polymers to Stabilize Nanoparticle Silicon Anodes

Silicon anodes provide a compelling route towards delivering high-capacity lithium-ion batteries, however they are notoriously difficult to stabilize in conventional liquid electrolytes that are compatible with high performance cathodes. Furthermore, the drastic changes in volume that occur as silicon is lithiated and delithiated can lead to rapid cell failure and novel polymeric binders are known to help mitigate mechanical issues. We have recently developed a novel method to synthesize the conjugated polymer phenylmethylimine (polyPMI) using an imine metathesis reaction. We have demonstrated that this polymer can be used to stabilize silicon nanoparticles to produce a composite lithium-ion battery anode that is electrochemically stable for hundreds of lithiation and delithiation cycles with a Coulombic efficiency that is greater than 99.95% in a traditional carbonate liquid electrolyte. This work covers the structure and properties of polyPMI within the context of the unique mechanical and electrochemical requirements of nanoparticle silicon anodes. The electrochemical behavior of this polymer also offers new opportunities as an organic lithium-coordinating material that can be used to stabilize a variety of other battery electrodes. More broadly, we posit that this solution-processed, ionically conductive, and electronically conductive polymer is applicable for a variety of energy storage and conversion technologies. Finally, this work demonstrates how this novel polymer chemistry provides additional opportunities for tuning electrode architecture to target high energy full cells.

conjugated polymers↗
DOE OSTI2021

UiO-66 Metal–Organic Framework as an Anode for a Potassium-Ion Battery: Quantum Mechanical Analysis

The natural abundance of potassium in the earth’s crust is 1000 times higher than that of lithium, so energy technologies built on potassium are more sustainable. Potassium-ion batteries have attracted considerable attention because of their relatively low cost and high operating potential, but questions remain about the best anode material for such batteries. Here, in this paper, we report first-principles computations based on density functional theory to investigate the performance of the UiO-66 metal–organic framework as an anode material for potassium-ion batteries; the goal is to provide a fundamental understanding of metal–organic framework (MOF)-based electrodes to guide the design and development of high-performance potassium-ion batteries. Our study includes the stability and electronic properties of potassiated structures and the mechanisms of potassium intercalation and diffusion in the framework. The results indicate that UiO-66 has a maximum specific capacity of 644 mAh/g as the anode of a potassium-ion battery. During potassiation, we observe charge transfer from potassium to carbon or oxygen of UiO-66 near the intercalated K. During K diffusion, the K migrates along the UiO-66 framework with a maximal migration energy barrier of 0.377 eV in the optimal pathway, which is much lower than the barriers for Li and Na diffusion in UiO-66. The diffusion coefficient of K in the anode is several orders of magnitude larger than those of Li and Na. This favors potassium ions over lithium ions or sodium ions when UiO-66 is the anode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Promises and Challenges of Next-Generation “Beyond Li-ion” Batteries for Electric Vehicles and Grid Decarbonization

The tremendous improvement in performance and cost of lithium-ion batteries (LIBs) have made them the technology of choice for electrical energy storage. While established battery chemistries and cell architectures for Li-ion batteries achieve good power and energy density, LIBs are unlikely to meet all the performance, cost, and scaling targets required for energy storage, in particular, in large-scale applications such as electrified transportation and grids. The demand to further reduce cost and/or increase energy density, as well as the growing concern related to natural resource needs for Li-ion have accelerated the investigation of so-called "beyond Li-ion" technologies. In this review, we will discuss the recent achievements, challenges, and opportunities of four important "beyond Li-ion" technologies: Na-ion batteries, K-ion batteries, all-solid-state batteries, and multivalent batteries. Here, the fundamental science behind the challenges, and potential solutions toward the goals of a low-cost and/or high-energy-density future, are discussed in detail for each technology. While it is unlikely that any given new technology will fully replace Li-ion in the near future, "beyond Li-ion" technologies should be thought of as opportunities for energy storage to grow into mid/large-scale applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Insights into the Interaction of Redox Active Organic Molecules and Solvents with the Pristine and Defective Graphene Surfaces from Density Functional Theory

A systematic study is reported on the interaction of two representative redox active organic molecules and two solvent molecules with pristine and defective graphene surfaces as a model of an electrode surface of a redox flow battery (RFB). The redox active molecules include a catholyte, 2,5-di-tert-butyl-1,4-dimethoxybenzene (DDB), and an anolyte molecule, benzothiadiazole (BTZ), and the solvent molecules include acetonitrile (MeCN) and ethylene carbonate (EC). The graphene defects investigated include a single vacancy, double vacancy, zigzag step edge, and armchair step edge. Computations suggest that the interactions of all molecules with a pristine graphene surface are relatively weak (0.2 to 0.8 eV) and dominated by van der Waals effects; therefore, these molecules are chemically stable upon interacting with pristine nondefective graphene. The BTZ, DDB, MeCN, and EC molecules interact strongly (1.5 to 5.5 eV) with the single vacancy and zigzag step edges of graphene that leads to the possible decomposition of the molecules with strength of interaction in the order of MeCN > BTZ > DDB > EC and MeCN > EC > BTZ > DDB, respectively. Calculations show that the BTZ, DDB, MeCN, and EC molecules interact less strongly (0.2 to 1.4 eV) to the double vacancy and armchair step edge than to the single vacancy and zigzag step edge. The binding energies of the molecules were significantly reduced when interacting with the passivated defects, suggesting that the passivation of the defects could help prevent unwanted chemical interactions between the neutral molecules and the electrode surface. In all organic RFBs, one of the crucial bottlenecks is the stability of the constituent molecules with the electrode material, and this study provides insights into the chemical interaction of selected candidate species with a model carbon electrode.

Howard, Jason D.↗
DOE OSTI2021

Operando Analysis of Gas Evolution in TiNb 2 O 7 (TNO)-Based Anodes for Advanced High-Energy Lithium-Ion Batteries under Fast Charging

TiNb 2 O 7 (TNO) is regarded as one of the promising next-generation anode materials for lithium-ion batteries (LIBs) due to its high rate capabilities, higher theoretical capacity, and higher lithiation voltage. Furthermore, this enables the cycling of TNO-based anodes under extreme fast charging (XFC) conditions with a minimal risk of lithium plating compared to that of graphite anodes. Here, the gas evolution in real time with TNO-based pouch cells is first reported via operando mass spectrometry. The main gases are identified to be CO 2 , C 2 H 4 , and O 2 . A solid–electrolyte interphase is detected on TNO, which continues evolving, forming, and dissolving with the lithiation and delithiation of TNO. The gas evolution can be significantly reduced when a protective coating is applied on the TNO particles, reducing the CO 2 and C 2 H 4 evolution by ~2 and 5 times, respectively, at 0.1C in a half-cell configuration. The reduction on gas generation in full cells is even more pronounced. The surface coating also enables 20% improvement in capacity under XFC conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗