The development of a miniaturized heater for thin film oxygen partial pressure sensors
Miniature heater for zinc oxide thin film oxygen partial pressure sensor
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Miniature heater for zinc oxide thin film oxygen partial pressure sensor
Carbon-fiber reinforced SiC (C/SiC) composites are proposed for leading edge applications of hypersonic vehicles due to the superior strength of carbon fibers at high temperatures (greater than 1500 C). However, the vulnerability of the carbon fibers in C/SiC to oxidation over a wide range of temperatures remains a problem. Previous oxidation studies of C/SiC have mainly been conducted in air or oxygen, so that the oxidation behavior of C/SiC at reduced oxygen partial pressures of the hypersonic flight regime are less well understood. In this study, both carbon fibers and C/SiC composites were oxidized over a wide range of temperatures and oxygen partial pressures to facilitate the understanding and modeling of C/SiC oxidation kinetics for hypersonic flight conditions.
Cyclotron resonance mass spectrometer for quantitative measuring of partial pressure analysis in high vacuum
Respiratory response to exposure of increased alveolar partial pressure of oxygen in presence or absence of nitrogen
Solution of breakdown problem at partial pressures in Apollo LEM transceiver
Morphological composition of peripheral blood in mice exposed to various periods of increased partial pressure of oxygen
Erythropoiesis response to exposure of atmosphere with increased oxygen partial pressure
Feasibility of miniaturized heater for zinc oxide thin film oxygen partial pressure sensor
A computer program for determining the partial pressures of various gases from residual-gas-analyzer data is given. The analysis of the ion currents of 18 m/e spectrometer peaks allows the determination of 12 gases simultaneously. Comparison is made to ion-gage readings along with certain other control information. The output data are presented in both tabular and graphical form.
Voltage breakdown threshold of electronic equipment in partial pressure environment of nitrogen and water vapor
An introduction to the fundamentals of total and partial pressure measurement in the vacuum regime (760 x 10 to the -16th power Torr) is presented. The instrument most often used in scientific fields requiring vacuum measurement are discussed with special emphasis on ionization type gauges and quadrupole mass spectrometers. Some attention is also given to potential errors in measurement as well as calibration techniques.
The detection limit for helium (He) partial pressure monitoring via the Penning discharge optical emission diagnostic, mainly used for tokamak divertor effluent gas analysis, is shown here to be possible for He concentrations down to 0.1% in predominantly deuterium effluents. This result from a dedicated laboratory study means that the technique can now be extended to intrinsically (non-injected) He produced as fusion reaction ash in deuterium-tritium experiments. The paper also examines threshold ionization mass spectroscopy as a potential backup to the optical technique, but finds that further development is needed to attain with plasma pulse-relevant response times. Both these studies are presented in the context of continuing development of plasma pulse-resolving, residual gas analysis for the upcoming JET deuterium-tritium campaign (DTE-2) and for ITER.
Clinical physiological effect of exposure to atmosphere of increased oxygen partial pressure and nitrogen
A global database of approximately 1.7 million observations of the partial pressure of carbon dioxide in surface ocean waters (pCO2) collected between 1970 and 2003 is used to estimate its spatial autocorrelation structure. The patterns of the lag distance where the autocorrelation exceeds 0.8 is similar to patterns in the spatial distribution of the first baroclinic Rossby radius of deformation indicating that ocean circulation processes play a significant role in determining the spatial variability of pCO2. For example, the global maximum of the distance at which autocorrelations exceed 0.8 averages about 140 km in the equatorial Pacific. Also, the lag distance at which the autocorrelation exceed 0.8 is greater in the vicinity of the Gulf Stream than it is near the Kuroshio, approximately 50 km near the Gulf Stream as opposed to 20 km near the Kuroshio. Separate calculations for times when the sun is north and south of the equator revealed no obvious seasonal dependence of the spatial autocorrelation scales. The pCO2 measurements at Ocean Weather Station (OWS) 'P', in the eastern subarctic Pacific (50 N, 145 W) is the only fixed location where an uninterrupted time series of sufficient length exists to calculate a meaningful temporal autocorrelation function for lags greater than a few days. The estimated temporal autocorrelation function at OWS 'P', is highly variable. A spectral analysis of the longest four pCO2 time series indicates a high level of variability occurring over periods from the atmospheric synoptic to the maximum length of the time series, in this case 42 days. It is likely that a relative peak in variability with a period of 3-6 days is related to atmospheric synoptic period variability and ocean mixing events due to wind stirring. However, the short length of available time series makes identifying temporal relationships between pCO2 and atmospheric or ocean processes problematic.
A particle-in-cell/Monte Carlo model is developed to study and analyze the electrical characteristics of the nonequilibrium plasma created by radio frequency (RF) discharge in Ar/O{sub 2} mixtures in the presence of crossed electric and magnetic fields. The method of collision treatment is based on an optimized estimation of the free time flight. The needed basic data--more specifically, the ion-neutral cross sections--are determined first. The simulation conditions are 50 mTorr for the total gas pressure and 200 V for the peak of the RF voltage at a frequency of 13.56 MHz. The magnetic field is varied from 0 to 50 G. The effect of the partial pressure ratio of O{sub 2} in the mixture and the effect of the magnitude of the magnetic field are discussed. In particular, the results show an increase of the plasma density that is ten times higher in the presence of a magnetic field.
In this paper, the magnetic properties of these films which deposited and annealed at different atmospheres were investigated. The experimental results show that the magnetic properties of yttrium iron garnet films prepared by rf magnetron sputtering method can be tuned with oxygen partial pressure in sputtering and annealing processes. The optimal condition is depositing in atmosphere of R=0 and annealing at 0.5 Pa O{sub 2}, or depositing in atmosphere of R=2% and annealed in vacuum.
Using in situ synchrotron measurements of total reflection x-ray fluorescence, we find evidence of strontium surface segregation in (001)-oriented La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films over a wide range of temperatures (25-900 deg. C) and oxygen partial pressures (pO{sub 2}=0.15-150 Torr). The strontium surface concentration is observed to increase with decreasing pO{sub 2}, suggesting that the surface oxygen vacancy concentration plays a significant role in controlling the degree of segregation. Interestingly, the enthalpy of segregation becomes less exothermic with increasing pO{sub 2}, varying from -9.5 to -2.0 kJ/mol. In contrast, the La{sub 0.7}Sr{sub 0.3}MnO{sub 3} film thickness and epitaxial strain state have little impact on segregation behavior.
An in situ stress measurement setup using an optical 2-beam curvature technique is described which is compatible with the stringent growth conditions of pulsed laser deposition (PLD) of perovskite oxides, which involves high substrate temperatures of 1000 K and oxygen partial pressures of up to 1 × 10{sup −4} millibars. The stress measurements are complemented by medium energy electron diffraction (MEED), Auger electron spectroscopy, and additional growth rate monitoring by a quartz microbalance. A shielded filament is used to allow for simultaneous stress and MEED measurements at high substrate temperatures. A computer-controlled mirror scans an excimer laser beam over a stationary PLD target. This avoids mechanical noise originating from rotating PLD targets, and the setup does not suffer from limited lifetime issues of ultra high vacuum (UHV) rotary feedthroughs.