Search NASA⌕ Search

SEARCH · Search NASA

Results for “PARTICLE THEORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Soft gluon emission at two loops in full color

The soft emission factor is a central ingredient in the factorization of generic n-particle gauge theory amplitudes with one soft gluon in the external state. We present the complete two-loop soft factor, capturing the leading power behavior in the soft-gluon momentum. At two loops, the color structure and the kinematic dependence of the soft factor become nontrivial as the soft gluon can couple to three hard partons for the first time (tripole terms). The nontrivial kinematic dependence of the tripole terms is of uniform, maximal transcendental weight, and can be expressed (in a “Euclidean” region) in terms of single-valued harmonic polylogarithms. Our results are consistent with the behavior of the recently computed symbol of the two-loop five-particle amplitude in $Ν$ = 4 super-Yang-Mills theory. In the limit where the outgoing soft gluon is also collinear with an incoming hard parton, potentially dangerous factorization-violating terms can arise.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Inelastic peridynamic model for molecular crystal particles

The peridynamic theory of solid mechanics is applied to modeling the deformation and fracture of micrometer-sized particles made of organic crystalline material. A new peridynamic material model is proposed to reproduce the elastic–plastic response, creep, and fracture that are observed in experiments. The model is implemented in a three-dimensional, meshless Lagrangian simulation code. In the small deformation, elastic regime, the model agrees well with classical Hertzian contact analysis for a sphere compressed between rigid plates. Under higher load, material and geometrical nonlinearity is predicted, leading to fracture. Finally, the material parameters for the energetic material CL-20 are evaluated from nanoindentation test data on the cyclic compression and failure of micrometer-sized grains.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Model for Independent Particle Motion

Independent particle model in nuclear physics assumes that the nucleon in the nucleus moves in the average (mean field) potential generated by all other nucleons. This chapter gives a short overview of basic features of the independent particle motion in atomic nuclei and its theoretical realization in the framework of shell models for spherical, deformed, and rotating nuclei as well as in more sophisticated approaches such as microscopic+macroscopic model and density functional theories. Independent particle motion of nucleons leads to global and single-particle consequences. The global ones manifest themselves in the shell structure, and its consequences for the global structure of nuclear landscape, the existence of superheavy nuclei, and the superdeformation at high spin are briefly reviewed. Finally, the latter shows itself in the single-particle properties such as energies, alignments, and densities; their manifestations are illustrated on specific examples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Involving the new generations in Fermilab endeavors

Since 1984 the Italian groups of the Istituto Nazionale di Fisica Nucleare (INFN) and Italian Universities, collaborating with the DOE laboratory of Fermilab (US) have been running a two-month summer training program for Italian university students. While in the first year the program involved only four physics students of the University of Pisa, in the following years it was extended to engineering students. This extension was very successful and the engineering students have been since then extremely well accepted by the Fermilab Technical, Accelerator, and Scientific Computing Division groups. Over the many years of its existence, this program has proven to be the most effective way to engage new students in Fermilab endeavors. Many students have extended their collaboration with Fermilab with their Master’s Thesis and PhD. Since 2004 the program has been supported in part by DOE in the frame of an exchange agreement with INFN. Over its almost 40 years of history, the program has grown in scope and size and has involved more than 550 Italian students from more than 20 Italian Universities, Several Institutes of Research, including ASI and INAF in Italy, and the ISSNAF Foundation in the US, have provided additional financial support. Since the program does not exclude appropriately selected non-Italian students, a handful of students from European and non-European Universities were also accepted over the years. Each intern is supervised by a Fermilab Mentor responsible for performing the training program. Training programs spanned from Tevatron, CMS, Muon (g-2), Mu2e, and Short Baseline Neutrino Experiments and DUNE design and experimental data analysis, development of particle detectors (silicon trackers, calorimeters, drift chambers, neutrino and dark matter detectors), design of electronic and accelerator components, development of infrastructures and software for exascale data handling, research on superconductive elements and on accelerating cavities, and theory of particle accelerators. Since 2010, within an extended program supported by the Italian Space Agency and the Italian National Institute of Astrophysics, a total of 30 students in physics, astrophysics, and engineering have been hosted for two months in the summer at US space science Research Institutes and laboratories. In 2015 the University of Pisa included these programs within its educational programs. Accordingly, Summer School students are enrolled at the University of Pisa for the duration of the internship and are identified and ensured as such. At the end of the internship, the students are required to write summary reports on their achievements. After positive evaluation by a University Examining Board, interns are acknowledged credits for their Diploma Supplement. The program was canceled in 2020 and 2021 due to the pandemic but restarted successfully in 2022. We believe this program can be taken as a model and easily adopted by interested institutions.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Momentum shift and on-shell constructible massive amplitudes

We construct tree-level amplitude for massive particles using on-shell recursion relations based on two classes of momentum shifts: an all-line transverse shift that deforms momentum by its transverse polarization vector, and a massive Britto-Cachazo-Feng-Witten-type shift. We illustrate that these shifts allow us to correctly calculate four-point and five-point amplitudes in massive QED, without an ambiguity associated with the contact terms that may arise from a simple “gluing” of lower-point on-shell amplitudes. We discuss various aspects and applicability of the two shifts, including the large-z behavior and complexity scaling. We show that there exists a “good” all-line transverse shift for all possible little group configurations of the external particles, which can be extended to a broader class of theories with massive particles such as massive QCD and theories with massive spin-1 particles. The massive Britto-Cachazo-Feng-Witten-type shift enjoys more simplicity, but a “good” shift does not exist for all the spin states due to the specific choice of spin axis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Particle production by time-varying dark energy and the end of cosmic expansion

We consider various possible consequences of time-varying dark energy due to a quintessence scalar field whose energy density is partially converted to particles as the field evolves down its potential. This particle production acts as a source of thermal friction on the field that can make it difficult to distinguish whether dark energy is due to a radiating field rolling down a steep potential, a purely self-interacting field moving down a flatter potential, or a cosmological constant. By reducing the acceleration of the scalar field, thermal friction increases the amount of accelerated expansion and can cause a sizable bump in the quintessence equation of state. We take special interest in the case where a steep potential rapidly changes from positive to negative as the field evolves, resulting in the end of cosmic expansion and the beginning of contraction. Even in this case, we find that thermal friction lengthens the period of accelerated expansion and consequently delays the end of cosmic expansion, making it challenging to detect the impending transition to contraction using conventional cosmological tests. However, particle production can also provide alternative avenues for detection by generating a background of thermal dark radiation, partly comprised of neutrinos or other particles, whose energy density exceeds the remnant photon energy density.

cosmological neutrinos↗
DOE OSTI2023

CCN data from TAMU TRACER campaign in the Houston TX region from July to September 2022

During TRACER, the Texas A&M Rapid Onsite Atmospheric Measurements Van (ROAM-V) was deployed to capture airmasses behind (maritime) and ahead (continental) of the passage of the sea-breeze front through Houston. On select sampling days, ROAM-V sampled in the morning/mid-day on the coast and then transited to a second inland site for the afternoon/evening. The suite of instruments deployed on ROAM-V included a Condensation Particle Counter (CPC; GRIMM Model 5.403 CPC), Scanning Mobility Particle Sizer (SMPS; TSI 3750 detector, TSI 3082 classifier, TSI 3088 neutralizer, TSI 3081A Differential Mobility Analyzer), Cloud Condensation Nuclei counter (Droplet Measurement Technologies CCN Counter), micro pulse lidar (Droplet Measurement Technologies Micro Pulse LiDAR (miniMPL)), and a Davis Rotating Uniform size-cut Monitor (DRUM; DRUMAir 4-DRUM). Before sampling at each location, the latitude and longitude were recorded using the GPS on the phone application “My Altitude”. Onboard the ROAM-V, aerosol samples are drawn through a shared isokinetic inlet at a flow rate ranging from 3.5 to 7.0 LPM. A portion of this flow is directed through a cyclone impactor (Brechtel, Inc. Model SCC 0.732) and 0.5 LPM is directed to the CCN. To calculate particle losses, we used a two-step method. First, the measured SMPS size distributions were used to calculate particle loss through the inlet during sampling. Second, the corrected SMPS data was used to calculate the average of the total losses per scan down the CCN line. Then, the correction was applied to the CCN data. This calculation was done separately for each deployment location due to changes in the measured size distributions between locations. Particle loss from diffusion (based on Kesten, 1991 and Gormley, 1949), inertial impaction in 90-degree bends (based on Aerosol Measurement, 2011 and Crane, 1977), and cyclone impactor efficiency (based on Dirgo, 1985) were included in the loss calculation. When the SMPS was not sampling at a location (in the case of an instrument malfunction or operator error), the reported CPC data was corrected with an average of the total losses for the entire campaign at the specified deployment location (e.g., if we needed to correct Galveston data, then the average of all calculated losses at Galveston was taken). These flatline corrections were used for all data on 22/07/13, 22/07/20, 22/07/22, and the data from Galveston on 22/08/09. The supersaturation uncertainty is estimated conservatively at +/- 0.03%, where variation in the inlet temperature, pressure, and calibration technique prevents a more accurate measurement. Confidence in the reported supersaturation measurements is based on a pre-campaign calibration (following the methods from our previous work and Deng, 2014 based on Rose, 2008) in addition to inter-comparisons with the DOE for two days (22/08/18 and 22/09/01) where TAMU was co-located with AMF1. The inter-comparisons show good agreement between our instrument and the DOEs instrument on both days at all supersaturations. After the last inter-comparison on 22/09/01, there was no indication of a malfunction by our instrument through the rest of the campaign. Unfortunately, the instrument was dropped during demobilization. A post-campaign calibration was conducted, which showed a substantial departure from the pre-campaign calibration. The drop may have damaged the instrument’s ability to produce the desired supersaturations. Therefore, we do consider the data after 22/09/01 to be correct, but it should be used with caution. The CCN counter sampled for 3 minutes at each supersaturation setpoint (0.2, 0.4, 0.6, 0.8, 1.0, and 1.2%). At the end of a cycle, the instrument was set to 0.01% supersaturation for 5 minutes. The data is comprised of the last 60 seconds of each supersaturation set point (0.2, 0.4, 0.6, 0.8, 1.0, and 1.2%) to ensure the instrument stabilized and was able to reach thermal equilibrium. We removed the data during the periods where there were operational difficulties, setup, or maintenance. This data was collected for ARM Field Campaign AFC07055 and supported by DOE ASR grant DE-SC0021047. For any further questions, please feel free to contact the instrument PI, Sarah D. Brooks, sbrooks@tamu.edu. Rose et. al. Calibration and Measurement Uncertainties of a Continuous-Flow Cloud Condensation Nuclei Counter (DMT-CCNC): CCN Activation of Ammonium Sulfate and Sodium Chloride Aerosol Particles in Theory and Experiment. Atmos. Chem. Phys., 8, 1153-1179, 2008. Deng et. al. Using Raman Microspectroscopy to Determine Chemical Composition and Mixing State of Airborne Marine Aerosols over the Pacific Ocean. Aerosol Science and Technology, Vol 48, Issue 2, 2014. Kesten et. al. Calibration of a TSI Model 3025 Ultrafine Condensation Particle Counter. Aerosol Science and Technology, 15:2, 107-111, 1991. Gormley et. al. Diffusion from a Stream Flowing through a Cylindrical Tube. Proceedings of the Royal Irish Academy, Vol 52, 163-169, 1948. Aerosol Measurement: Principles, Techniques, and Applications, Third Edition. John Wiley & Sons, Inc, 2011. Crane et. al. Inertial Deposition of Particles in a Bent Pipe. Journal of Aerosol Science, Vol 8, 161-170, 1977. Dirgo et. al. Cyclone Collection Efficiency: Comparison of Experimental Results with Theoretical Predictions. Aerosol Science and Technology, 4:4, 401-415, 1985.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Metal Oxide Particles as Atmospheric Nuclei: Exploring the Role of Metal Speciation in Heterogeneous Efflorescence and Ice Nucleation

Mineral dust can indirectly impact climate by nucleation of atmospheric solids, for example, by heterogeneously nucleating ice in mixed-phase clouds or by impacting the phase of aerosols and clouds through contact nucleation. The effectiveness toward nucleation of individual components of mineral dust requires further study. Here, the nucleation behavior of metal oxide nanoparticle components of atmospheric mineral dust is investigated. A long-working-distance optical trap is used to study contact and immersion nucleation of ammonium sulfate by transition-metal oxides, and an environmental chamber is used to probe depositional ice nucleation on metal oxide particles. Previous theory dictates that ice nucleation and heterogeneous nucleation of atmospheric salts can be impacted by several factors including morphology, lattice match, and surface area. Here, we observe a correlation between the cationic oxidation states of the metal oxide heterogeneous nuclei and their effectiveness in causing nucleation in both contact efflorescence mode and depositional freezing mode. In contrast to the activity of contact efflorescence, the same metal oxide particles did not cause a significant increase in efflorescence relative humidity when immersed in the droplet. In conclusion, these experiments suggest that metal speciation, possibly as a result of cationic charge sites, may play a role in the effectiveness of nucleation that is initiated at particle surfaces.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Integrated modeling methodology for ash agglomeration in poly-disperse fluidized beds using particle population framework

This article discusses a unique agglomeration modeling methodology developed based on binary collisions to combine the effects of heterogeneity in ash chemistry and granular physics. A simple population balance is defined to find changes in the particle size distribution (PSD) of a fluidized bed. Thermodynamic equilibrium calculations and a computational fluid dynamics (CFD) code, are used to obtain hydrodynamic parameters. A method to calculate and use a distribution of collision frequencies in fluidized beds, corresponding to a poly-disperse particle size distribution, was developed in order to incorporate the particle level heterogeneities. A distribution of collision frequencies obtained for poly-dispersed particles showed a three orders of magnitude higher collision frequency amongst the smaller particles than the coarser ones, at the initiation of agglomeration. Ash agglomeration occurred when the slag amount (binder) was less than 10 wt% at temperatures <850 °C for Pittsburgh No. 8 coal.

42 ENGINEERING↗
DOE OSTI2025

Efficient use of quantum computers for collider physics

Most observables at particle colliders involve physics at a wide variety of distance scales. Due to asymptotic freedom of the strong interaction, the physics at short distances can be calculated reliably using perturbative techniques, while long distance physics is non-perturbative in nature. Factorization theorems separate the contributions from different scales, allowing to identify the pieces that can be determined perturbatively from those that require non-perturbative information, and if the non-perturbative pieces can be reliably determined, one can use experimental measurements to extract the short distance effects, sensitive to possible new physics. Without the ability to compute the non-perturbative ingredients from first principles one typically identifies observables for which the non-perturbative information is universal in the sense that it can be extracted from some experimental observables and then used to predict other observables. In this paper we argue that the future ability to use quantum computers to calculate non-perturbative matrix elements from first principles will allow to make predictions for observables with non-universal non-perturbative long-distance physics.

Algorithms and Theoretical Developments↗
DOE OSTI2022

Cannibalism's lingering imprint on the matter power spectrum

The early universe may have contained internally thermalized dark sectors that were decoupled from the Standard Model. In such scenarios, the relic dark thermal bath, composed of the lightest particle in the dark sector, can give rise to an epoch of early matter domination prior to Big Bang Nucleosynthesis, which has a potentially observable impact on the smallest dark matter structures. This lightest dark particle can easily and generically have number-changing self-interactions that give rise to “cannibal” behavior. We consider cosmologies where an initially sub-dominant cannibal species comes to temporarily drive the expansion of the universe, and we provide a simple map between the particle properties of the cannibal species and the key features of the enhanced dark matter perturbation growth in such cosmologies. Finally, we further demonstrate that cannibal self-interactions can determine the small-scale cutoff in the matter power spectrum even when the cannibal self-interactions freeze out prior to cannibal domination.

cosmological perturbation theory↗
DOE OSTI2020

Common origin of warm dark matter and dark radiation

We consider a cosmological scenario where a relativistic particle and a stable massive particle are simultaneously produced from the decay of a late-decaying particle after Big-Bang Nucleosynthesis but before matter-radiation equality. The relativistic and massive particles behave as dark radiation and warm dark matter, respectively. Due to a common origin, the warmness and abundances are closely related. We refer to the models that lead to such a scenario as Common Origin of Warm and Relativistic Decay Products (COWaRD). We show that COWaRD predicts a correlation between the amount of dark radiation and suppression of the large scale structure, which can be tested in future precision cosmology observations. Furthermore, we demonstrate that COWaRD is realized, as an example, in a class of supersymmetric axion models and that future observations by the next generation Cosmic Microwave Background, Large Scale Structure, and 21-cm surveys can reveal the structure of the theory.

cosmology of theories beyond the SM↗
DOE OSTI2022

Axially-deformed solution of the Skyrme-Hartree-Fock-Bogoliubov equations using the transformed harmonic oscillator basis (IV) HFBTHO (v4.0): A new version of the program

We describe the new version 4.0 of the code HFBTHO that solves the nuclear Hartree-Fock-Bogoliubov problem by using the deformed harmonic oscillator basis in cylindrical coordinates. In the new version, we have implemented the restoration of rotational, particle number, and reflection symmetry for even-even nuclei. The restoration of rotational symmetry does not require using bases closed under rotation. Furthermore, we added the SeaLL1 functional and improved the calculation of the Coulomb potential. Finally, we refactored the code to facilitate maintenance and future developments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Recycled dark matter

Here, we outline a new production mechanism for dark matter that we dub “recycling”: dark sector particles are kinematically trapped in the false vacuum during a dark phase transition; the false pockets collapse into primordial black holes (PBHs), which ultimately evaporate before Big Bang Nucleosynthesis (BBN) to reproduce the dark sector particles. The requirement that all PBHs evaporate prior to BBN necessitates high scale phase transitions and hence high scale masses for the dark sector particles in the true vacuum. Our mechanism is therefore particularly suited for the production of ultra heavy dark matter (UHDM) with masses above ~10 12 GeV. The correct relic density of UHDM is obtained because of the exponential suppression of the false pocket number density. Recycled UHDM has several novel features: the dark sector today consists of multiple decoupled species that were once in thermal equilibrium and the PBH formation stage has extended mass functions whose shape can be controlled by IR operators coupling the dark and visible sectors.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Photons from dark photon solitons via parametric resonance

Wave-like dark matter made of spin-1 particles (dark photons) is expected to form ground state clumps called "vector solitons", which can have different polarizations. Here, in this work, we consider the interaction of dark photons with photons, expressed as dimension-6 operators, and study the electromagnetic radiation that arises from an isolated vector soliton due to parametric resonant amplification of the ambient electromagnetic field. We characterize the directional dependence and polarization of the outgoing radiation, which depends on the operator as well as the polarization state of the underlying vector soliton. We discuss the implications of this radiation for the stability of solitons and as a possible channel for detecting mergers of vector solitons through astrophysical observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Variational nonlinear WKB in the Eulerian frame

Nonlinear WKB is a multiscale technique for studying locally plane-wave solutions of nonlinear partial differential equations (PDEs). Its application comprises two steps: (1) replacement of the original PDE with an extended system separating the large scales from the small and (2) reduction of the extended system to its slow manifold. In the context of variational fluid theories with particle relabeling symmetry, nonlinear WKB in the mean Eulerian frame is known to possess a variational structure. This much has been demonstrated using, for instance, the theoretical apparatus known as the generalized Lagrangian mean. On the other hand, the variational structure of nonlinear WKB in the conventional Eulerian frame remains mysterious. By exhibiting a variational principle for the extended equations from step (1) above, here we demonstrate that nonlinear WKB in the Eulerian frame is in fact variational. Remarkably, the variational principle for the extended system admits loops of relabeling transformations as a symmetry group. Noether’s theorem therefore implies that the extended Eulerian equations possess a family of circulation invariants parameterized by S 1 . As an illustrative example, we use our results to systematically deduce a variational model of high-frequency acoustic waves interacting with a larger-scale compressible isothermal flow.

97 MATHEMATICS AND COMPUTING↗