Search NASA⌕ Search

SEARCH · Search NASA

Results for “PH VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The Effects of Lithium Ions and pH on the Function of Polyacrylic Acid Binder for Silicon Anodes

Binder plays a critical role in the performance of silicon anodes for lithium-ion batteries, specifically by connecting particles of active material and promoting adhesion to the current collector. Recent studies have differed on the relative cycle life of silicon anodes made from water-based polyacrylic acid (PAA) vs LiOH-PAA binders. Differences between the two may be due to the pH value or the extra Li + in the binder, both of which change when LiOH is added to PAA. Here we investigate the impact of these two variables on the performance of silicon anodes. Regarding the effect of Li + , cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results confirm our hypothesis that the extra Li + facilitates ion transport. Regarding pH, we find that high pH in binders is detrimental to the electrode mechanical integrity, as observed in peeling tests and cross-sectional imaging. However, viscosity tests reveal that increased pH benefits the coating and mixing process. Further, our cycling results show that LiOH-PAA binder maintains greater cell capacity than does PAA, and further that LiOH-PAA at pH 4.5 leads to a cell with the highest capacity. Therefore, an intermediate pH is an optimal compromise between benefits observed for the low and high pH experiments.

25 ENERGY STORAGE↗
DOE OSTI2020

Fate of arsenic during up to 4.5 years of aging of Fe III -As V coprecipitates at acidic pH: Effect of reaction media (Nitrate vs. Sulfate), Fe/As molar ratio, and pH

Iron-arsenate (Fe III -As V ) coprecipitate generated in acid mine drainage and hydrometallurgical practices is one of the potential sources of As contamination in the environment. However, the As behavior as well as the transformation process of the Fe III -As V coprecipitate is still not fully understood under acidic conditions. This work systematically studied the effect of reaction media (sulfate vs. nitrate), Fe/As molar ratios, and acidic pH values on the transformation rates, routes, and products of the Fe III -As V coprecipitates at different temperatures during up to 4.5 years of aging. X-ray diffraction (XRD), transmission electron spectroscopy (TEM), Raman spectroscopy, and extended X-ray absorption fine structure spectroscopy (EXAFS) results showed that the Fe III -As V coprecipitates with Fe/As = 2 transformed to scorodite at pH 4 in both sulfate and nitrate media with poorly crystalline ferric arsenate as precursor. In comparison, for the Fe/As = 4 samples, parascorodite and hematite were formed in sulfate and nitrate media, respectively. We note arsenic was released into the liquid phase during the aging process for the samples with Fe/As = 2 and 4. The aqueous As concentrations ([As] aq ) in sulfate media were larger than those in nitrate media for both the Fe/As = 2 and 4 samples. In addition, the transformation products were goethite and Na-jarosite at Fe/As = 8 and 16, pH 2.5 with the decrease of [As] aq . The results also indicated that 6-line ferrihydrite was a common intermediate for many Fe-As transformation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

An Active‐Site Sulfonate Group Creates a Fast Water Oxidation Electrocatalyst That Exhibits High Activity in Acid

Abstract The storage of solar energy in chemical bonds will depend on pH‐universal catalysts that are not only impervious to acid, but actually thrive in it. Whereas other homogeneous water oxidation catalysts are less active in acid, we report a catalyst that maintained high electrocatalytic turnover frequency at pH values as low as 1.1 and 0.43 ( k cat =1501±608 s −1 and 831±254 s −1 , respectively). Moreover, current densities, related to catalytic reaction rates, ranged from 15 to 50 mA cm −2 mM −1 comparable to those reported for state‐of‐the‐art heterogeneous catalysts and 30 to 100 times greater than those measured for two prominent literature homogeneous catalysts at pH 1.1 and 0.43. The catalyst also exhibited excellent durability when a chemical oxidant was used (Ce IV , 7400 turnovers, TOF 0.88 s −1 ). Preliminary computational studies suggest that the unusual active‐site sulfonate group acts a proton relay even in strong acid, as intended.

Nash, Aaron G.↗
DOE OSTI2020

An Active–Site Sulfonate Group Creates a Fast Water Oxidation Electrocatalyst That Exhibits High Activity in Acid

The storage of solar energy in chemical bonds will depend on pH–universal catalysts that are not only impervious to acid, but actually thrive in it. Whereas other homogeneous water oxidation catalysts are less active in acid, we report a catalyst that maintained high electrocatalytic turnover frequency at pH values as low as 1.1 and 0.43 (k cat = 1501±608 s –1 and 831±254 s –1 , respectively). Moreover, current densities, related to catalytic reaction rates, ranged from 15 to 50 mA cm –2 mM –1 comparable to those reported for state–of–the–art heterogeneous catalysts and 30 to 100 times greater than those measured for two prominent literature homogeneous catalysts at pH 1.1 and 0.43. The catalyst also exhibited excellent durability when a chemical oxidant was used (Ce IV , 7400 turnovers, TOF 0.88 s –1 ). Here, preliminary computational studies suggest that the unusual active–site sulfonate group acts a proton relay even in strong acid, as intended.

14 SOLAR ENERGY↗
DOE OSTI2024

Characterizing cobalt sequestration in manganese-rich coal mine drainage treatment solids

This study investigates Co adsorption on synthesized birnessites over a wide pH range and in sulfate-rich solution to simulate CMD treatment conditions. Langmuir and Freundlich adsorption isotherms of Co at pH values of 3.5, 4.5, and 6.5 at 25°C onto Na-and H-birnessite were generated. Cobalt concentrations in supernatants were determined by ICP-MS and chelation ion chromatography. Mineralogy and morphology of pre- and post-adsorption experiment solids characterization by X-ray diffraction and scanning electron microscopy will be presented. These experiments suggest that cobalt sulfate complexes and pH of CMD, as well as the Mn-oxide mineral structures present in treatment beds, will impact cobalt adsorption in CMD solids, and can be used as calibration points for equilibrium and kinetic modeling approaches that are critical for developing effective and implementable remediation processes and to better inform future Co recovery efforts from CMD solids.

Schaffer, Camille↗
DOE OSTI2020

Enhanced carbon-transfer and -utilization efficiencies achieved using membrane carbonation with gas sources having a range of CO 2 concentrations

The economic viability of microalgal biofuels relies on increasing productivity in a cost-effective manner. As microalgal biomass contains > 50% carbon, a high rate of CO 2 delivery is required for high productivity, and inefficient CO 2 delivery amplifies operating costs. Membrane carbonation using non-porous hollow fiber membranes can ideally deliver CO 2 without bubble formation and high carbon transfer efficiency. Because CO 2 streams from industrial resources are not 100% CO 2 , the buildup of inert gasses can significantly lower the CO 2 delivery rate when the distal end of the membrane is closed. To overcome the buildup of inert gases, we managed the distal end of the membranes with three different approaches: fully open end, restricted bleed valve, and restricted bleed valve with pH-actuated venting. For all approaches, CO 2 was delivered to membranes ondemand based on a pH set point. Evaluating a wide range of CO 2 concentrations (10% to 100%), we found that all approaches eliminated the buildup of inert gases, could maintain target pH values and gave the same biomass productivities and carbon distributions. However, carbon transfer efficiency depended on the operation of the distal end. Fully open-end operation gave a poor carbon transfer efficiency because of excessive loss of CO 2 from the distal end. However, restricting the exit flow rate to ≤4 cm 3 /min mitigated the problems of excessive CO 2 loss, but without incurring a large loss of CO 2 -delivery flux. For the continuous cultivation, combining a restricted bleed valve with pH-actuated venting improved the carbon-transfer efficiency and -utilization efficiencies up to 85% and 67%, respectively, with a sufficient CO 2 delivery flux.

42 ENGINEERING↗
DOE OSTI2020

Soil chemistry data across a catena in the Luquillo Experimental Forest, Puerto Rico

Landscape topography can influence biogeochemical processes across the wet tropical forest soils. This dataset contains soil chemistry data such as pH and dissolved organic carbon (DOC) from April 1, 2017 to May 1, 2018 across a catena in the Luquillo Experimental Forest, Puerto Rico. The attached CSV file contains information on sampling date, location (El Verde field station) in LEF, topographic positions (ridge, slope, and valley, respectively), field replicate number, laboratory replicate number, water extractable pH, CaCl2 extractable pH, and DOC (unit: mg/g). Overall, soil pH values were highest in the valley, followed by slope, and lowest in the ridge topographic positions. However, DOC values followed the opposite trend: ridge>slope>valley. This dataset can facilitate our understanding of the biogeochemical cycling of carbon and nutrient associated with complex topography in wet tropical forest soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Non-Fouling, Low Cost Electrolytic Coagulation & Disinfection for Treating Flowback and Produced Water for Reuse

Executive Summary This Final Report is composed of two major sections. The first section presents experimental results obtained in the laboratory during Budget Period 1. The second section presents results from the field test conducted during Budget Period 2. Laboratory Results This research investigated a novel electrochemical process for producing a ferric iron coagulant for use in treating flowback and produced water from hydraulic fracturing and oil production operations. The treatment system improves the effectiveness and lowers the cost of coagulation processes using Fe3+ as the coagulant. The electrolytic coagulant generation (ECG) system uses an electrochemical cell to produce acid and base from oilfield brine solutions. The acid is used to dissolve scrap iron to provide a Fe3+ coagulating agent. The base is used to neutralize the treated water. Compared to conventional electrocoagulation (EC), the main advantage of the ECG system is an order of magnitude lower cost for the source of iron. The second advantage over conventional EC is that it can deliver Fe3+ doses greater than 1 mM, since it is not limited by the amount of dissolved oxygen in the water required to oxidize ferrous to ferric iron. The capital costs for conventional EC and the ECG system are similar, but the operational costs for the ECG system are an order of magnitude lower than conventional EC. The combined costs for iron and electrical energy for treating 1 m3 of FPW with 1 mM Fe3+ is estimated to be $0.87 for conventional EC, and $0.087 for the ECG system. The estimated all-in cost for treating FPW with a 2 mM Fe3+ dose is $0.73/m3 ($0.12/bbl). Field Test Results The field test was conducted at the Paul Foster Central Tank Battery (CTB) in Lea County, New Mexico from November 10, 2022 through December 15, 2022. The feed water to the system was produced water from the Tatanka 1H formation. After approximately two weeks of testing, the initial batch of produced water had been treated and no untreated produced water was available. Thus, after this time, the feed water to the system consisted of previously treated water (i.e., recycled water). The recycled water had nearly all colloidal particles removed, and had a much lower alkalinity due to precipitation of carbonate minerals during the first pass through the system. Although the recycled water was not an ideal test solution due to its low particulate concentrations, its lower alkalinity did allow us to identify the main problem with the treatment system. The main problem with the treatment system was caused by the high alkalinity of the initial feed water (5.4 meq/L) that consumed a significant fraction of the electrochemically generated acid. This resulted in pH values exiting the iron contact tank that were too high to dissolve enough iron to effectively treat the produced water. Tests performed with recycled water with lower alkalinity did not have this issue, and dissolved iron concentrations greater than 20 mM could be achieved. One consistent observation was that effluent water from the iron contact tank was always free of particulates, even when fed with circumneutral solutions. This suggests that there is no need to dissolve high concentrations of iron if all the water to be treated is passed through the scrap iron canister. In this case, dissolved O2 and hypochlorous acid can promote sufficient iron corrosion to provide an effective coagulating agent – even in neutral pH water. This solves the problem resulting from highly alkaline produced water. Modifications to the design of the treatment system were made based on the field test results. These modifications will add minimal additional cost, and were tested in bench-scale laboratory experiments. In short-term testing, the modified treatment process was able to remove colloidal FeS particulates to levels below detection. Long-term, steady state testing will be required to determine whether the modified process is suitable for commercial treatment systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

At-source Recovery of Rare Earth Elements from Coal Mine Drainage

Conventional acid mine drainage (AMD) treatment consists of pH adjustment, oxidation, and separation of solid precipitates from discharge quality water. Alkaline addition increases the pH to the range 7 to 9 to precipitate the regulated metals Al and Mn ions as hydroxides. Mechanical or chemical oxidation then converts the reduced iron species Fe 2+ to Fe 3+ which precipitates at a low pH value as ferric hydroxide (Fe(OH) 3 ). Co-precipitation of Rare Earth Elements (REEs) with hydroxides creates a gangue-rich matrix from which REEs must be separated. Fe(OH)3 is generally the most abundant gangue-forming metal. Current research by the project team has shown raw, untreated AMD has an average total rare earth element content (TREE) of about 287 μg/L (0.287 ppm). Operators of AMD-producing facilities are obliged to treat it to neutralize acidity and remove regulated metals (e.g., iron (Fe), aluminum (Al), and manganese (Mn)) prior to discharge. Ongoing research indicates conventional AMD treatment concentrates TREE in resulting precipitates (AMD sludge) by an average factor of 2,635x to an average dry weight, elemental concentration of 708 g/t (ppm). While the economics of recovering REEs from AMD sludge are appealing, much of the cost of REE recovery would be incurred during separation of REEs from the gangue metals: Fe, Al, and Mn. Significant gains can be made by precipitating REEs when most of these gangue metals are still in solution. Significant improvements in REE extraction efficiency can be obtained through separation of REEs from the aqueous phase AMD, upstream of conventional AMD treatment by: 1) creating an enriched REE feedstock, 2) producing a more consistent feedstock, 3) reducing transportation costs to an REE refinery, 4) reducing acid consumption in the acid leaching step, and 5) reducing the volume of waste produced at the ALSX plant. This project is exploring two novel approaches for extracting REEs upstream of the conventional AMD treatment plants to create a purified REE feedstock while leaving the bulk of the Fe, Al, and Mn in solution for subsequent treatment. While the average TREE concentration of raw AMD is low and individual sites range between 10 and 2,200 μg/L, successful at-source REE separation will generate a superior feedstock to a conventional ALSX process and significantly improve the economics and environmental performance of REE extraction from AMD. AMD can be classified into two types: type A is net acid and iron is partly oxidized while type B is net alkaline, and iron occurs in the reduced, ferrous state. In Case A, the pH is raised slightly, which will precipitate Fe 3+ and Al 3+ but not REEs. The other important type of AMD is net alkaline water found in flooded, anoxic deep mines. These generally have a pH > 6.0 and are net alkaline. REE concentrations are also much lower than those found in acidic AMD while the volumes and flux are much higher. Most of these are pumped discharges with almost no Al. Case B AMD is strongly reduced and, like Case A water, Fe and Mn ions are similarly reduced and therefore soluble at pH <9.0. REEs and an array of transition ions will be the only trivalent cations in this type of AMD. In Case B, both upward pH adjustment under reducing conditions and application of an electrochemically stimulated supported liquid membrane strategy to separate REEs from ferrous ion will be explored.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Ion Transport in Carbon Nanotube Porins with a pH-Switchable Entrance Gate

Molecular transport in nanofluidic channels often differs drastically from conventional bulk transport. Strong confinement in those channels amplifies the roles of surface transport, surface defects, and molecular gates. Here, in this study, we introduce a chemical functionality at the nanotube rim that acts as a pH-triggered molecular gate by forming a movable lid that blocks the pore entrance. We use ion and proton transport measurements to show that these sub-1 nm diameter fluorescent ultrashort carbon nanotube porins (FUNPs) modulate ion transport by switching between the “open” and “closed” conformations of this gate. Specifically, at neutral pH the channel lid is open, allowing unimpeded ion transport through the gate, whereas at acidic pH values the lid forms a “closed” conformation that blocks transport through the nanotube. We also report first-principles MD simulations that confirm this gating mechanism and reveal molecular details of the ion and proton transport processes in these functional nanopores.

Carbon nanotubes↗
DOE OSTI2025

Impact of Advances in Anion Exchange Membranes and Ionomers on Alkaline Fuel Cells

Abstract The operation of low‐temperature electrochemical energy conversion systems (fuel cells, electrolyzers) at high pH values is of perennial interest due to the possibility of moving away from expensive platinum group metal catalysts and reducing cost. Historically, the anion exchange membranes (AEMs) and ionomers have been hampered by performance (ionic conductivity, mechanical strength) and chemical stability issues. In this context, select developments over the past decade in alternate AEM chemistries, water management methods, and production of membrane electrode assemblies (MEAs) that have enabled a significant leap in performance of alkaline fuel cells are examined. These developments are linked to performance improvements in alkaline H 2 /O 2 fuel cells and also consider developments in alkaline fuel cells using nitrogen‐containing fuels (ammonia, hydrazine), carbon‐containing fuels (alcohols, glycols), and boron‐containing fuels (sodium borohydride, ammonia borane). Finally, current challenges and bottlenecks are identified, and potential solutions are proposed.

Chemistry↗
DOE OSTI2024

Uptake of arsenic and selenium on iron-doped Pb resin

We report the uptake of the radioisotopes 73 As and 75 Se was characterized on Fe 3+ -doped Pb resin (Eichrom Technologies) from pH 1 to 12. There is good uptake of arsenic and selenium over a wide pH range (~ 1 to 10) with a decrease only at high pH (~ 12). Column experiments were performed to demonstrate the separations of these elements from solutions with near neutral pH values (~ 6 to 8) with high yields and high radiopurity. These separations may be relevant for a wide variety of applications especially isotope harvesting research.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Large-area nanostructured surfaces with tunable zeta potentials

Through a refined fabrication protocol based on block-copolymer self-assembly we synthesize nanostructured surfaces with conical nanopillars of different height (60, 120, and 200 nm) in hexagonal arrays with uniform spacing (~50 nm) over large areas (>cm 2 ). While the nanostructured surfaces fabricated on silicon substrates display superhydrophilic behavior, superhydrophobic properties are attained by coating with octadecyltrichlorosilane (OTS). Negative zeta potentials for all the studied surfaces are reported by electrokinetic flow measurements with aqueous KCl solutions at different concentrations (1 and 10 mM) and pH values between 4 and 8. While the surface nanostructure reduces the zeta potential magnitude, the hydrophobic OTS coating enhances it. Experimental results can be accounted for by a site-dissociation model for the surface charge density. The reported wetting properties and zeta potential tunability makes the studied surfaces particularly relevant for applications such as energy conversion and storage, membrane-based water treatment and molecular separation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Porous transport electrodes for oxygen evolution reaction in proton exchange membrane water electrolysis -cells: Materials, designs, and diagnoses

H 2 production using proton exchange membrane (PEM) water electrolysis (PEMWE) cells has received considerable attention because of the high efficiencies of these cells and no harmful emissions from the related process. In PEMWE cells, porous transport electrodes (PTEs) composed of a catalyst layer (CL) comprising O 2 evolution reaction (OER) catalysts, porous transport layer (PTL), and PEM play key roles in the stack performance and lifetime. Herein, Ir-based and non-precious-metal OER catalysts that are highly active and stable at low pH values and high anodic potentials are reviewed to understand their OER mechanisms. Various strategies are proposed for engineering CLs and PTLs to improve the interfacial properties and mass transfers of reactants and products to and from the active sites. Additionally, diagnoses of PTEs is significantly crucial for interpreting electrochemical processes and addressing their current challenges. Therefore, half-cell analyses, including diffusion electrode (DE), floating electrode (FE), and modified rotating disk electrode (MRDE) techniques, are explored, and membrane electrode assembly (MEA)-based analyses, such as the polarization technique, electrochemical impedance spectroscopy, and magnetic field analysis, are established. In conclusion, this study aims to provide an overview of recent technologies used for the engineering and diagnostic tools of PEMWE cells and insights into the advanced components and systems to be developed in this field.

Diagnosis of PEMWE Cells↗
DOE OSTI2021

Strain hardening magnesium-silicate-hydrate composites (SHMSHC) reinforced with short and randomly oriented polyvinyl alcohol microfibers

Magnesium-silicate-hydrate (M-S-H) cement has emerged as an alternative binder with potentially lower energy requirements and emissions. Due to the intrinsically low pH values of its matrix, however, normal steel reinforcement is not appropriate for M-S-H system. To toughen the matrix and to overcome the brittle nature of the material, a new strain hardening magnesium-silicate-hydrate composite (SHMSHC) is developed for the first time by incorporating 2 vol% short and randomly oriented polyvinyl alcohol (PVA) microfibers. The resulting SHMSHC exhibits significant strain hardening with a tensile strain capacity of more than 3%, a compressive strength beyond 50 MPa and a tensile strength of around 3 MPa. Remarkably, saturated multiple cracking with a tight crack width less than 10 μm invisible to the human naked eyes was observed. The newly developed SHMSHC addresses the fundamental challenge of M-S-H binder and is expected to widen possible application areas of M-S-H system.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Trends in electrocatalytic activity and stability of transition-metal nitrides

Transition metal nitrides (TMNs) are a class of electrocatalyst support materials similar to transition metal carbides (TMCs) with the advantage of avoiding the issues arising from graphitic carbon surface deposits during synthesis. Inspired by previous studies suggesting that TMCs could be used to reduce Pt loading for the hydrogen evolution reaction (HER), this work explored the feasibility of TMN-supported Pt and Au as HER electrocatalysts. Here this study established a volcano-like trend between electrochemical HER activity and hydrogen-binding energy (HBE) calculated from density functional theory. The Pt/TiN and Au/TiN materials were used to extend knowledge from well-characterized thin films to powder catalysts. In situ X-ray absorption spectroscopy (XAS) measurements provided additional characterization of the Pt/TiN and Au/TiN catalysts under HER conditions. Trends in the electrochemical stability of TMNs were also investigated over a wide range of potentials and pH values, which can be used to guide future studies for TMN-supported electrocatalysts.

58 GEOSCIENCES↗
DOE OSTI2022

Te(IV) immobilization by siderite: Reaction kinetics, mechanism, and Te isotopic fractionation

Mining and industrial use over recent decades have released tellurium (Te) into the environment where it potentially contaminates soils, water supplies and food sources. Therefore, it is important to find ways of removing mobile and bioavailable Te from aqueous environments. Here, we report aqueous Te(IV) removal by siderite at varying Te concentrations (2, 6 and 10 mg mL –1 Te(IV)) and pH values (7, 7.9 and 9), together with associated isotope fractionation (ε 130 Te/ 125 Te). Our results show effective immobilization of Te(IV) that follows pseudo-first order rate kinetics. Formation of magnetite indicates reduction of Te(IV) on siderite surfaces and the formation of Te(0). The overall isotope fractionation (ε) is small (–0.23 ± 0.06‰) providing evidence that it is primarily controlled by adsorption of Te(IV) occurring simultaneously with reduction of Te(IV). Therefore, Te(IV) removal by siderite under mildly reducing ferruginous conditions may be identifiable by the characteristically small isotopic fractionation during both natural attenuation and active remediation. To our knowledge, this is the first study reporting reaction mechanisms of Te(IV) immobilization by an environmentally relevant Fe(II) mineral.

58 GEOSCIENCES↗
DOE OSTI2024

Effects of spatial variability in vegetation phenology, climate, landcover, biodiversity, topography, and soil property on soil respiration across a coastal ecosystem

Coastal terrestrial-aquatic interfaces (TAIs) are crucial contributors to global biogeochemical cycles and carbon exchange. A systematic evaluation of the interaction between coastal catchment properties and carbon dioxide (CO2) emission by soil respiration is significant for assessing carbon dynamics and predicting the future trajectory of atmospheric CO2 concentrations in coastal TAIs. The soil CO2 efflux in these transition zones is however poorly understood due to the high spatiotemporal dynamics of TAIs, as various sub-ecosystems in this region are compressed and expanded by complex influences of tides, changes in river levels, climate, and land use. We focus on the Chesapeake Bay region to (i) investigate the spatial heterogeneity of the coastal ecosystem and identify spatial zones with similar environmental characteristics based on the spatial data layers, including vegetation index (kNDVI), climate, landcover, diversity, topography, soil property, and relative tidal elevation; (ii) understand the primary driving factors affecting soil respiration within sub-ecosystems of the coastal ecosystem. Specifically, we employed hierarchical clustering analysis to identify spatial regions with distinct environmental characteristics, followed by the determination of main driving factors using Random Forest regression and SHapley Additive exPlanations. Maximum and minimum temperature are the main drivers common to all sub-ecosystems, while each region also has additional unique major drivers that differentiate them from one another. Precipitation exerts an influence on vegetated lands, while soil pH value holds importance specifically in forested lands. In croplands characterized by high clay content and low sand content, the significant role is attributed to bulk density. Wetlands demonstrate the importance of both elevation and sand content, with clay content being more relevant in non-inundated wetlands than in inundated wetlands. The topographic wetness index significantly contributes to the mixed vegetation areas, including shrub, grass, pasture, and forest. Additionally, our research reveals that dense vegetation land covers and urban/developed areas exhibit distinct soil property drivers. Overall, there is no one-size-fits-all approach to modeling carbon fluxes in coastal TAIs, and our study highlights the importance of further research and monitoring practices to improve our understanding of carbon dynamics and promote the sustainable management of coastal TAIs.

54 ENVIRONMENTAL SCIENCES↗