SEARCH · Search NASA

Results for “PHYSICAL FITNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Low energy neutron light output characterization of EJ301D and deuterated stilbene with a comparison of light output characterization methods

The neutron-induced light yield of a 2.54 cm diameter by 2.54 cm long right circular cylinder of EJ301D and a (5.08 cm)3 custom made cube of deuterated trans-stilbene-d12 (d-stilbene) were measured over incident neutron energies from 300 keV to 2.2 MeV and 200 keV to 2.4 MeV, respectively. The measurements were performed using a time-of-flight experiment with a Cf-252 source and an approximately 1.5 m flight path. We compare three light output spectrum full energy deposition edge estimation methods: (1) simulating the neutron energy spectrum edge and fitting it to the light output spectrum, (2) using the inflection point of the light output spectrum edge (derivative method, a.k.a. Kornilov’s method), and (3) using an empirical model fit to the edge of the light output spectrum. Both the derivative and equation fit methods do not account for physical processes such as multiple neutron scattering in the detectors. They instead rely on assumptions about the linear shape continuum shape of the light output spectrum and the direct correlation between the location of the spectrum’s inflection point and maximum energy deposition. These assumptions were found to introduce bias into those methods when tested against simulated spectra with known edge locations. When tested against measured spectra the derivative method was found to differ from the simulation fit by greater than 30% at low energies with large discontinuities for adjacent data points above 800 keV incident neutron energy. The empirical equation fitting method was found to also exhibit bias of a similar magnitude, but with significantly more continuous behavior, especially with the lower count data of the smaller volumed EJ301D scintillator. Experimental light output yield for this neutron energy range is reported using the simulated spectrum fitting method because it includes physics neglected by the other methods, and did not exhibit the bias observed in the other methods

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2025

The effects of continuum fitting on Lyman-α forest correlations

Correlations of fluctuations of the flux in Lyman-α forests of high-redshift quasars have been observed by the Baryonic Acoustic Oscillation Spectroscopy Survey (BOSS) and the Dark Energy Spectroscopy Instrument (DESI) survey where they have revealed the effects of baryon acoustic oscillations (BAO). In order to fit the correlation functions to a physical model and thereby constrain cosmological parameters, it is necessary to take into account the effects of fitting the observed spectra to a template about which the fluctuations are measured. In this paper we use mock spectra to test the distortion matrix technique that has been used since the final BOSS data release to appropriately distort the models. We show that while percent-level effects on the derived forest bias parameters may be present, the technique works sufficiently well that the determination of the BAO peak position is not affected at the percent level. We introduce modifications in the technique used by DESI that were not in the original applications and suggest further possibilities for improvements.

Lyman alpha forest↗

DOE OSTI2024

The separate effect of halo mass and stellar mass on the evolution of massive disc galaxies

ABSTRACT We analyse a sample of massive disc galaxies selected from the fourth-generation Sloan Digital Sky Survey/Mapping Nearby Galaxies at Apache Point Observatory survey to investigate how the evolution of these galaxies depends on their stellar and halo masses. We applied a semi-analytic spectral fitting approach to the data from different regions in the galaxies to derive several of their key physical properties. From the best-fitting model results, together with direct observables such as morphology, colour, and the Mgb/〈Fe〉 index ratio measured within 1Re, we find that for central galaxies both their stellar and halo masses have a significant influence in their evolution. For a given halo mass, galaxies with higher stellar mass accumulate their stellar mass and become chemically enriched earlier than those with smaller stellar mass. Furthermore, at a given stellar mass, galaxies living in more massive haloes have longer star formation time-scales and are delayed in becoming chemically enriched. In contrast, the evolution of massive satellite galaxies is mostly determined by their stellar mass. The results indicate that both the assembled halo mass and the halo assembly history impact the evolution of central galaxies. Our spatially resolved analysis indicates that only the galaxy properties in the central region (0.0–0.5Re) show the dependencies described above. This fact supports a halo-driven formation scenario since the galaxies’ central regions are more likely to contain old stars formed along with the halo itself, keeping a memory of the halo formation process.

Zhou, Shuang (ORCID:0000000289996814)↗

DOE OSTI2022

Computational Tools and Workflows for Quantitative Risk Assessment and Decision Support for Geologic Carbon Storage Sites: Progress and Insights from the U.S. DOE’s National Risk Assessment Partnership

The 2005 Intergovernmental Panel on Climate Change (IPCC) Special Report on CCS raised the profile of CO2 capture and storage (CCS) as an important technology for reducing greenhouse gas (GHG) emissions. CCS is now recognized as a key component of most climate change mitigation scenarios. Since publication of that report the international research, development, and deployment (RD&D) community has advanced key technical aspects, clarified regulatory requirements, explored value chain and infrastructure solutions, and developed incentive paradigms to enable and promote large-scale deployment of CCS. These efforts have included research to better characterize geologic storage resources, to improve injection performance and storage efficiency, to assess and manage subsurface environmental risks, and to advance monitoring technologies to assure system conformance. These efforts have helped to build confidence in the viability of geologic carbon storage (GCS), but stakeholder concerns about long-term risks and liability associated with GCS remain a hurdle to broad acceptance and large-scale deployment of CCS. Since 2010, the U.S. DOE’s National Risk Assessment Partnership (NRAP) – a research collaboration between five contributing national laboratories – has worked to establish and demonstrate methods and tools to quantify and manage the subsurface environmental risks associated with GCS, amidst uncertainty. This work supports the Office of Fossil Energy and Carbon Management Carbon Transport and Storage Program’s goal of advancing safe and secure commercial-scale GCS deployment. To address the technical challenge of simulating the physical response of the GCS site to large-scale CO2 injection, NRAP has adopted an approach that relies on coupling computationally efficient reduced-order and/or data-driven proxy models of important system components (i.e., storage reservoir, sealing caprock, leakage pathways, intermediate formations, overlying groundwater aquifers, and the atmosphere) in integrated assessment framework. That integrated model of the physical system is complemented with fit-for purpose functionality to support site characterization and risk-related decisions. The recently released NRAP Phase II toolset includes the Open-Source Integrated Assessment Model (NRAP-Open-IAM) for evaluation of trends in leakage risk and potential impact, tools to support monitoring design optimization (Designs for Risk Evaluation and Management – DREAM v3.0 and Passive Seismic Monitoring Tool - PSMT), and tools for state of stress evaluation (State-of-Stress Analysis Tool - SOSAT) and forecasting induced seismicity risk. The NRAP team has also released a pair of reports describing conceptual workflows to incorporate physics-based, quantitative risk assessment into many of the design, planning, operation, and closure decisions for GCS projects. An online catalogue highlights published studies where these tools and methods are demonstrated. In this presentation, the utility of these products to assess risks and address key stakeholder questions will be highlighted through examples, and related insights about the safety and security of geologic carbon storage in qualified storage sites will be discussed. The prospect of rapid, large-scale deployment of GCS technology to aggressively reduce anthropogenic CO2 emissions requires careful consideration of interference between multiple commercial-scale storage projects within a basin. Going forward, NRAP is expanding and adapting site-scale risk quantification tools and methods to enable assessment of risks and inform management decisions for basin-scale deployment. Increasingly, this work will leverage next-generation approaches for surrogate modelling, fast prediction, and advanced visualization enabled by machine learning and artificial intelligence to promote virtual learning, scenario evaluation, and augment risk-based decision making.

quantitative risk assessment, geologic carbon stor↗

DOE OSTI2024

EFIT-Prime: Probabilistic and physics-constrained reduced-order neural network model for equilibrium reconstruction in DIII-D

We introduce EFIT-Prime, a novel machine learning surrogate model for EFIT (Equilibrium FIT) that integrates probabilistic and physics-informed methodologies to overcome typical limitations associated with deterministic and ad hoc neural network architectures. EFIT-Prime utilizes a neural architecture search-based deep ensemble for robust uncertainty quantification, providing scalable and efficient neural architectures that comprehensively quantify both data and model uncertainties. Physically informed by the Grad–Shafranov equation, EFIT-Prime applies a constraint on the current density J tor and a smoothness constraint on the first derivative of the poloidal flux, ensuring physically plausible solutions. Furthermore, the spatial location of the diagnostics is explicitly incorporated in the inputs to account for their spatial correlation. Extensive evaluations demonstrate EFIT-Prime's accuracy and robustness across diverse scenarios, most notably showing good generalization on negative-triangularity discharges that were excluded from training. Timing studies indicate an ensemble inference time of 15 ms for predicting a new equilibrium, offering the possibility of plasma control in real-time, if the model is optimized for speed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Relations between b → cτν decay modes in scalar models

As a consequence of the Ward identity for hadronic matrix elements, we find relations between the differential decay rates of semileptonic decay modes with the underlying quark-level transition b → cτν, which are valid in scalar models. The decay-mode dependent scalar form factor is the only necessary theoretical ingredient for the relations. Otherwise, they combine measurable decay rates as a function of the invariant mass-squared of the lepton pair $q^2$ in such a way that a universal decay-mode independent function is found for decays to vector and pseudoscalar mesons, respectively. This can be applied to the decays $B → D^{\ast}τv, B_s → D^\ast_sτv, B_c → J/ψτv$ and $B → Dτv, B_s → D_sτv, B_c → η_cτv$, with implications for $R(D^{(\ast)}), R(D^{(\ast)}_s), R(J/ψ), R(η_c)$, and $\mathcal{B}(B_c → τv)$. The slope and curvature of the characteristic $q^2$-dependence is proportional to scalar new physics parameters, facilitating their straight forward extraction, complementary to global fits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

“Unification” of BSM searches and SM measurements: the case of lepton+E T and m W

We develop the idea that the unprecedented precision in Standard Model (SM) measurements, with further improvement at the HL-LHC, enables new searches for physics Beyond the Standard Model (BSM). As an illustration, we demonstrate that the measured kinematic distributions of the ℓ + E T final state not only determine the mass of the W boson, but are also sensitive to light new physics. Such a search for new physics thus requires a simultaneous fit to the BSM and SM parameters, “unifying” searches and measurements at the LHC and Tevatron. In this paper, we complete the program initiated in our earlier work [1]. In particular, we analyze (i) novel decay modes of the W boson with a neutrinophilic invisible scalar or with a heavy neutrino; (ii) modified production of W bosons, namely, associated with a hadrophilic invisible Z′ gauge boson; and (iii) scenarios without an on-shell W boson, such as slepton-sneutrino production in the Minimal Supersymmetric Standard Model (MSSM). Here, we complement our previous MSSM analysis in [1] by considering a different kinematic region. Our results highlight that new physics can still be directly discovered at the LHC, including light new physics, via SM precision measurements. Furthermore, we illustrate that such BSM signals are subtle, yet potentially large enough to affect the precision measurements of SM parameters themselves, such as the W boson mass.

Electroweak Precision Physics↗

DOE OSTI2020

Electron and proton conductivity of Fe-N-C cathodes for PEM fuel cells: A model-based electrochemical impedance spectroscopy measurement

Impedance spectra of a PEM fuel cell with three Fe-N-C cathodes have been measured under the H 2 /N 2 testing regime. The spectra have been fitted using a recently developed physics-based impedance model, which takes into account finite proton ($σ_p$) and electron ($σ_e$) conductivity of the oxygen-free cathode catalyst layer. Fitting allowed to extract numerical data for $σ_p$, $σ_e$, the double layer capacitance, and the inductance of cables used for measuring impedance spectra. The values of σp and σe are close to what previously found for standard Pt/C electrodes, which is found for the first time using PGM-free catalysts. The method enables simultaneous measurement of reference proton and electron conductivity of PEMFC cathode.

25 ENERGY STORAGE↗

DOE OSTI2023

Ab initio quantum scattering calculations and a new potential energy surface for the HCl( X 1Σ+)–O2(X3Σg−) system: Collision-induced line shape parameters for O2-perturbed R(0) 0–0 line in H35Cl

The remote sensing of abundance and properties of HCl—the main atmospheric reservoir of Cl atoms that directly participate in ozone depletion—is important for monitoring the partitioning of chlorine between “ozone-depleting” and “reservoir” species. Such remote studies require knowledge of the shapes of molecular resonances of HCl, which are perturbed by collisions with the molecules of the surrounding air. In this work, we report the first fully quantum calculations of collisional perturbations of the shape of a pure rotational line in H35Cl perturbed by an air-relevant molecule [as the first model system we choose the R(0) line in HCl perturbed by O2]. The calculations are performed on our new highly accurate HCl(X1Σ+)–O2(X3Σg−) potential energy surface. In addition to pressure broadening and shift, we also determine their speed dependencies and the complex Dicke parameter. This gives important input to the community discussion on the physical meaning of the complex Dicke parameter and its relevance for atmospheric spectra (previously, the complex Dicke parameter for such systems was mainly determined from phenomenological fits to experimental spectra and the physical meaning of its value in that context is questionable). We also calculate the temperature dependence of the line shape parameters and obtain agreement with the available experimental data. We estimate the total combined uncertainties of our calculations at 2% relative root-mean-square error in the simulated line shape at 296 K. This result constitutes an important step toward computational population of spectroscopic databases with accurate ab initio line shape parameters for molecular systems of terrestrial atmospheric importance.

Chemistry↗

DOE OSTI2024

Assessing equation of state-independent relations for neutron stars with nonparametric models

Relations between neutron star properties that do not depend on the nuclear equation of state offer insights on neutron star physics and have practical applications in data analysis. Such relations are obtained by fitting to a range of phenomenological or nuclear physics equation of state models, each of which may have varying degrees of accuracy. In this study we revisit commonly used relations and reassess them with a very flexible set of phenomenological nonparametric equation of state models that are based on Gaussian processes. Our models correspond to two sets: equations of state which mimic hadronic models, and equations of state with rapidly changing behavior that resemble phase transitions. Here we quantify the accuracy of relations under both sets and discuss their applicability with respect to expected upcoming statistical uncertainties of astrophysical observations. We further propose a goodness-of-fit metric which provides an estimate for the systematic error introduced by using the relation to model a certain equation-of-state set. Overall, the nonparametric distribution is more poorly fit with existing relations, with the I–Love–Q relations retaining the highest degree of universality. Fits degrade for relations involving the tidal deformability, such as the binary-Love and compactness-Love relations, and when introducing phase transition phenomenology. For most relations, systematic errors are comparable to current statistical uncertainties under the nonparametric equation of state distributions.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Baryonic effects in the Effective Field Theory of Large-Scale Structure and an analytic recipe for lensing in CMB-S4

Upcoming Large-Scale Structure surveys will likely become the next leading sources of cosmological information, making it crucial to have a precise understanding of the influence of baryons on cosmological observables. The Effective Field Theory of Large-Scale Structure (EFTofLSS) provides a consistent way to predict the clustering of dark matter and baryons on large scales, where their leading corrections in perturbation theory are given by a simple and calculable functional form even after the onset of baryonic processes. In this paper, we extend the two-fluid-like system up to two-loop order in perturbation theory. Along the way, we show that a new linear counterterm proportional to the relative velocity of the fluids could generically be present, but we show that its effects are expected to be small in our universe. Regardless, we show how to consistently perform perturbation theory in the presence of this new term. We find that the EFTofLSS at two-loop order can accurately account for the details of baryonic processes on large scales. Additionally, we compare our results to a hydrodynamical N-body simulation at many redshifts and find that the counterterms associated with the leading corrections to dark matter and baryons start to differ between redshifts z ≈ 3 and z ≈ 2, signaling the onset of star-formation physics. We then use these fits to compute the lensing power spectrum, show that the understanding of baryonic processes will be important for analyzing CMB-S4 data, and show that the two-loop EFTofLSS accurately captures these effects for ℓ ≲ 2000. Our results are also potentially of interest for current and future weak lensing surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Outflowing photoionized plasma in Circinus X-1 using the high-resolution X-ray spectrometer Resolve onboard XRISM and the radiative transfer code cloudy

High-resolution X-ray spectroscopy is a key to understanding the mass inflow and outflow of compact objects. Spectral lines carry information about the ionization, density, and velocity structures through their intensity ratios and profiles. They are formed in non-local thermodynamic equilibrium conditions under the intense radiation field from the compact objects; thus radiative transfer (RT) calculation is a requisite for proper interpretations. We present such a study for a low-mass X-ray binary, Circinus X-1, from which the P Cygni profile was discovered using the X-ray grating spectrometer onboard Chandra. We observed the source using the X-ray microcalorimeter onboard XRISM at an orbital phase of 0.93–0.97 and revealed many spectral features unidentified before: the higher series transitions ($n{\rightarrow }1$; $n>2$) of highly ionized (H- and He-like) S, Ca, Ar, and Fe in emission and absorption, the Fe K$\alpha$ and K$\beta$ inner-shell excitation absorption of mildly ionized (O- to Li-like) Fe, and resolved fine-structure level transitions in the Fe Ly$\alpha$ and He$\alpha$ complexes. They blend with each other at different velocity shifts on top of apparently variable continuum emission that changed its flux by an order of magnitude within a 70 ks telescope time. Despite such complexity in the observed spectra, most of them can be explained by a simple model consisting of the photoionized plasma outflowing at $\sim$300 km s$^{-1}$ and the variable blocking material in the line of sight of the incident continuum emission from the accretion disk. We demonstrate this with the aid of the RT code cloudy for the line ratio diagnostics and spectral fitting. We further constrain the physical parameters of the outflow and argue that the outflow is launched close to the outer edge of the accretion disk and can be driven radiatively by being assisted by the line force calculated using the RT simulation.

X-rays: binaries↗

DOE OSTI2024

Improving resbos for the precision needs of the LHC

The resummation calculation (esos) is a widely used tool for the simulation of single vector boson production at colliders. In this work, we develop a significant improvement over the esos code by increasing the accuracy from NNLL + NLO to N 3 LL + NNLO and release the esos v2.0 code. Furthermore, we propose a new nonperturbative function that includes information about the rapidity of the system (IFY). The IFY functional form was fitted to data from fixed target experiments, the Tevatron, and the LHC. We find that the nonperturbative function has mild rapidity dependence based on the results of the fit. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Adaptive Ensemble Refinement of Protein Structures in High Resolution Electron Microscopy Density Maps with Radical Augmented Molecular Dynamics Flexible Fitting

Recent advances in cryo-electron microscopy (cryo-EM) have enabled modeling macromolecular complexes that are essential components of the cellular machinery. The density maps derived from cryo-EM experiments are often integrated with manual, knowledge or artificial intelligence driven, and physics-guided computational methods to build, fit, and refine molecular structures. Going beyond a single stationary- structure determination scheme, it is becoming more common to interpret the experimental data with an ensemble of models, which contributes to an average observation. Hence, there is a need to decide on the quality of an ensemble of protein structures on-the-fly, while refining them against the density maps. Here, we introduce such an adaptive decision making scheme during the molecular dynamics flexible fitting (MDFF) of biomolecules. Using RADICAL-Cybertools, and the new RADICAL augmented MDFF implementation (R-MDFF) is examined in high-performance computing environments for refinement of two protein systems, Adenylate Kinase and Carbon Monoxide Dehydrogenase. For the test cases, use of multiple replicas in flexible fitting with adaptive decision making in R-MDFF improves the overall correlation to the density by 40% relative to the refinements of the brute-force MDFF. The improvements are particularly significant at high, 2 - 3 Å, map resolutions. More importantly, the ensemble model captures key features of biologically relevant molecular dynamics that is inaccessible to a single-model interpretation. Finally, the pipeline is applicable to systems of growing sizes, which is demonstrated using ensemble refinement of capsid proteins from Chimpanzee adenovirus. The overhead for decision making remaining low and robust to computing environments. The software is publicly available on GitHub and includes a short user guide to install the R-MDFF on different computing environments, from local Linux based workstations to High Performance Computing (HPC) environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Machine learning approaches for structural and thermodynamic properties of a Lennard-Jones fluid

Predicting the functional properties of many molecular systems relies on understanding how atomistic interactions give rise to macroscale observables. However, current attempts to develop predictive models for the structural and thermodynamic properties of condensed-phase systems often rely on extensive parameter fitting to empirically selected functional forms whose effectiveness is limited to a narrow range of physical conditions. Here, we illustrate how these traditional fitting paradigms can be superseded using machine learning. Specifically, we use the results of molecular dynamics simulations to train machine learning protocols that are able to produce the radial distribution function, pressure, and internal energy of a Lennard-Jones fluid with increased accuracy in comparison to previous theoretical methods. The radial distribution function is determined using a variant of the segmented linear regression with the multivariate function decomposition approach developed by Craven et al. [J. Phys. Chem. Lett. 11, 4372 (2020)]. The pressure and internal energy are determined using expressions containing the learned radial distribution function and also a kernel ridge regression process that is trained directly on thermodynamic properties measured in simulation. The presented results suggest that the structural and thermodynamic properties of fluids may be determined more accurately through machine learning than through human-guided functional forms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Self-organized criticality in multi-pulse gamma-ray bursts

The variability in multi-pulse gamma-ray bursts (GRBs) may help to reveal the mechanism of underlying processes from the central engine. To investigate whether the self-organized criticality (SOC) phenomena exist in the prompt phase of GRBs, we statistically study the properties of GRBs with more than 3 pulses in each burst by fitting the distributions of several observed physical variables with a Markov Chain Monte Carlo approach, including the isotropic energy E iso , the duration time T, and the peak count rate P of each pulse. Our sample consists of 454 pulses in 93 GRBs observed by the CGRO/BATSE satellite. The best-fitting values and uncertainties for these power-law indices of the differential frequency distributions are: α$^{d}_{E}$ = 1.54±0.09, α$^{d}_{T}$ = 1.82±$^{+0.14}_{0.15}$ and α$^{d}_{P}$ = 2.09$^{+0.18}_{–0.19}$, while the power-law indices in the cumulative frequency distributions are: α$^{c}_{E}$ = 1.44$^{+0.08}_{–0.10}$, α$^{c}_{T}$ = 1.75$^{+0.141}_{–0.13}$ and α$^{c}_{P}$ = 1.99$^{+0.16}_{–0.19}$. We find that these distributions are roughly consistent with the physical framework of a Fractal-Diffusive, Self-Organized Criticality (FD-SOC) system with the spatial dimension S = 3 and the classical diffusion β=1. The results of this study support that the jet responsible for the GRBs should be magnetically dominated and magnetic instabilities (e.g., kink model, or tearing-model instability) lead the GRB emission region into the SOC state.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Nonlocal suppression of Biermann battery magnetic-field generation for arbitrary atomic numbers and magnetization

The Biermann battery term of magnetohydrodynamics (MHD) generates a magnetic field where electron density gradients and electron temperature gradients are perpendicular to one another. Kinetic simulations and experiments have shown that the rate of magnetic-field generation is lower than Biermann when the electron mean free path becomes comparable to or greater than the temperature gradient scale length, known as the nonlocal regime. We investigate the nonlocal suppression of the Biermann term using simplified Fokker–Planck simulations covering a wide range of parameters. We provide the first fit for nonlocal Biermann suppression that has physically accurate behavior for small and large values of a suitable nonlocality parameter, valid for an arbitrary atomic number, and that includes the effect of magnetization on nonlocality. Lastly, the fit is intended to provide an approximate method to account for reduced magnetic-field generation in MHD codes and theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Complementing a continuum thermodynamic approach to constitutive modeling with symbolic regression

Here, an interpretable machine learning method, physics-informed genetic programming-based symbolic regression (P-GPSR), is integrated into a continuum thermodynamic approach to developing constitutive models. The proposed strategy for combining a thermodynamic analysis with P-GPSR is demonstrated by generating a yield function for an idealized material with voids, i.e., the Gurson yield function. First, a thermodynamic-based analysis is used to derive model requirements that are exploited in a custom P-GPSR implementation as fitness criteria or are strongly enforced in the solution. The P-GPSR implementation improved accuracy, generalizability, and training time compared to the same GPSR code without physics-informed fitness criteria. The yield function generated through the P-GPSR framework is in the form of a composite function that describes a class of materials and is characteristically more interpretable than GPSR-derived equations. The physical significance of the input functions learned by P-GPSR within the composite function is acquired from the thermodynamic analysis. Fundamental explanations of why the implemented P-GPSR capabilities improve results over a conventional GPSR algorithm are provided.

42 ENGINEERING↗