Search NASA⌕ Search

SEARCH · Search NASA

Results for “PM2.5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

A Network of Field-Calibrated Low-Cost Sensor Measurements of PM2.5 in Lomé, Togo, Over One to Two Years

Air pollution is a leading cause of global premature mortality and is especially prevalent in many low- and middle-income countries (LMICs). In sub-Saharan Africa, preliminary monitoring networks, satellite retrievals of air-quality-relevant species, and air quality models show ambient fine particulate matter (PM 2.5 ) concentrations that far exceed the World Health Organization guidelines, yet many areas remain largely unmonitored and understudied. Deploying a network of five low-cost PurpleAir PM 2.5 monitors over 2 years (2019–2021), we present the first multiyear ambient air pollution monitoring data results from Lomé, Togo, a major West African coastal city with a population of about 1.4 million people. The full-study time period network-wide mean measured daily PM 2.5 concentration is 23.5 μ g m –3 m –3 . The strong regional influence of the dry and dusty Harmattan wind increases the local average PM 2.5 concentration by up to 58% during December through February, but the diurnal and weekly trends in PM 2.5 are largely controlled by local influences. At all sites, more than 87% of measured days exceeded the new WHO Daily PM 2.5 guidelines; these first measurements highlight the need for air quality improvement in a rapidly growing urban metropolis.

air pollution↗
NASA NTRSDate not supplied

A14H-04 Analysis of Simulated and Observed Trends in Global Surface PM2.5 and Aerosol Optical Properties from 1958 to 2018 Using the NASA GEOSCCM

Modeling of long-term trends of aerosols and their properties is important for constraining aerosol-climate forcing, and for characterizing changes in particulate matter pollution speciation and exposure. Here we study global and regional long-term trends in surface fine particulate matter (PM ) and aerosol optical properties for 60 years from 1958 to 2018, using simulations performed with the NASA Goddard Earth Observing System Chemistry Climate Model (GEOSCCM), and evaluate the model hindcast with observations for the last three decades. Comparing the modeled aerosols with a diverse set of observations helps interpret observed and simulated trends, and serves as a benchmark for future GEOSCCM developments and input datasets improvements. We first characterize modeled global and regional temporal changes in surface PM and its components, aerosol optical depth (AOD) and single scattering albedo (SSA) and we interpret their link with emissions drivers. We then compare modeled surface PM with ground-based observations from monitoring networks and with global reconstructed PM datasets from observations-model data fusion. Total AOD is compared with long-term satellite measurements from the Moderate Resolution Imaging Spectroradiometer (MODIS) and measurements from the ground-based Aerosol Robotic Network (AERONET). Additional aerosol optical properties, such as absorption and scattering coefficients, are evaluated with ground-based observations from the Global Atmosphere Watch (GAW) records.

aerosols↗
NASA NTRS2019

Assessing Uncertainties of a Geophysical Approach to Estimate Surface Fine Particulate Matter Distributions from Satellite-Observed Aerosol Optical Depth

Health impact analyses are increasingly tapping the broad spatial coverage of satellite aerosol optical depth (AOD) products to estimate human exposure to fine particulate matter (PM2.5). We use a forward geophysical approach to derive ground-level PM2.5 distributions from satellite AOD at 1 km2(exp) resolution for 2011 over the northeastern US by applying relationships between surface PM2.5 and column AOD (calculated offline from speciated mass distributions) from a regional air quality model (CMAQ; 12×12 km2(exp) horizontal resolution). Seasonal average satellite-derived PM2.5 reveals more spatial detail and best captures observed surface PM2.5 levels during summer. At the daily scale, however, satellite-derived PM2.5 is not only subject to measurement uncertainties from satellite instruments, but more importantly to uncertainties in the relationship between surface PM2.5 and column AOD. Using 11 ground-based AOD measurements within 10 km of surface PM2.5 monitors, we show that uncertainties in modeled PM2.5∕AOD can explain more than 70 % of the spatial and temporal variance in the total uncertainty in daily satellite-derived PM2.5 evaluated at PM2.5 monitors. This finding implies that a successful geophysical approach to deriving daily PM2.5 from satellite AOD requires model skill at capturing day-to-day variations in PM2.5∕AOD relationships. Overall, we estimate that uncertainties in the modeled PM2.5∕AOD lead to an error of 11 µg m−3(exp) in daily satellite-derived PM2.5, and uncertainties in satellite AOD lead to an error of 8 µg m−3(exp). Using multi-platform ground, airborne, and radiosonde measurements, we show that uncertainties of modeled PM2.5∕AOD are mainly driven by model uncertainties in aerosol column mass and speciation, while model representation of relative humidity and aerosol vertical profile shape contributes some systematic biases. The parameterization of aerosol optical properties, which determines the mass extinction efficiency, also contributes to random uncertainty, with the size distribution being the largest source of uncertainty and hygroscopicity of inorganic salt the second largest. Future efforts to reduce uncertainty in geophysical approaches to derive surface PM2.5 from satellite AOD would thus benefit from improving model representation of aerosol vertical distribution and aerosol optical properties, to narrow uncertainty in satellite-derived PM2.5.

aerosol optical depth↗
NASA NTRSDate not supplied

Satellite-Assisted Particulate Matter (SAPM) for the Models, In situ, and Remote Sensing of Aerosols (MIRA) Working Group

Models, In situ, and Remote sensing of Aerosols (MIRA) is an international working group that provides a forum for collaborations amongst these three atmospheric aerosol communities. MIRA consists of a collection of interdisciplinary and independently funded Topic/Project groups with clear goals and generally characterized by requests for additional scientific data. The Satellite-Assisted Particulate Matter (SAPM) Topic group focuses on the study of fine particulate matter (PM2.5), as it is a major contributor to air pollution and negatively impacts human health. Our group aims to provide intercomparisons of various methods and techniques for estimating surface PM2.5 assisted by satellite remote sensors (passive and active), global aerosol models, and in situ aerosol measurements. The overall motivation of our work is to enhance PM2.5 coverage beyond in situ ground stations, which can be limited. In this presentation, we provide an overview of various PM2.5 estimation approaches by current SAPM team members, as each approach has its own strengths and limitations. One approach uses near-surface aerosol extinction retrievals from the spaceborne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and an assumed value of mass extinction efficiency to derive PM2.5 concentrations (Toth et al 2019). A study using this method found a promising agreement (R=0.60; slope=0.89) with U.S. Environmental Protection Agency (EPA) in situ PM2.5 measurements over the contiguous United States (CONUS) for a 12-year (2007-2018) period (Toth et al 2022). In a different approach combining spaceborne lidar and a model, the Cloud Aerosol Transport System (CATS) lidar and Goddard Earth Observing System (GEOS) model are blended in an ensemble variational assimilation scheme to retrieve aerosol extinction and convert speciated mass concentrations to total PM2.5. A recent study (Matus et al in prep.) found agreement within 2 μg/m3 over the CONUS on the 2016 annual mean when compared to EPA ground-based measurements. Another study explored trends in city aerosol optical depth (AOD) from a spaceborne passive remote sensor, Moderate Resolution Imaging Spectroradiometer (MODIS), and found that these trends agree well with trends in city surface PM2.5, which provides confidence in the use of city AOD for city PM2.5 trend studies (Vohra et al 2021). In a follow-on study, steep and significant trends (~2.5 to 7.8% a-1) in AOD are found for several South Asian cities (e.g., Bangalore and Hyderabad), suggesting rapid growth in PM2.5 (Vohra et al 2022). Also in this presentation, we report results on our current collective SAPM study of India, a country that exhibits high levels of PM2.5 pollution. We show the temporal (i.e., seasonal) and spatial variability of PM2.5 over India using the CALIOP and CATS+model approaches, comparisons between the estimated PM2.5 from the retrieval schemes, and validation with in situ PM2.5 ground-based observations from the Central Pollution Control Board in India. This region provides us with an excellent case study to test our PM2.5 retrievals in heavily polluted scenes and over a complex and varying topography. The SAPM Topic group actively seeks international participants/collaborators in our group, including those working with in situ aerosol measurements (e.g., ACTRIS). We are interested in aerosol datasets in order to either improve our PM2.5 estimates from various approaches (e.g., using in situ mass scattering/absorption coefficient and aerosol hygroscopic properties for various aerosol species) and/or validate the PM2.5 estimates (e.g., using in situ ground-based PM2.5 concentrations).

Travis D Toth↗
NASA NTRS2016

Quantifying PM2.5-Meteorology Sensitivities in a Global Climate Model

Climate change can influence fine particulate matter concentrations (PM2.5) through changes in air pollution meteorology. Knowledge of the extent to which climate change can exacerbate or alleviate air pollution in the future is needed for robust climate and air pollution policy decision-making. To examine the influence of climate on PM2.5, we use the Geophysical Fluid Dynamics Laboratory Coupled Model version 3 (GFDL CM3), a fully-coupled chemistry-climate model, combined with future emissions and concentrations provided by the four Representative Concentration Pathways (RCPs). For each of the RCPs, we conduct future simulations in which emissions of aerosols and their precursors are held at 2005 levels while other climate forcing agents evolve in time, such that only climate (and thus meteorology) can influence PM2.5 surface concentrations. We find a small increase in global, annual mean PM2.5 of about 0.21 micro-g/cu m3 (5%) for RCP8.5, a scenario with maximum warming. Changes in global mean PM2.5 are at a maximum in the fall and are mainly controlled by sulfate followed by organic aerosol with minimal influence of black carbon. RCP2.6 is the only scenario that projects a decrease in global PM2.5 with future climate changes, albeit only by -0.06 micro-g/cu m (1.5%) by the end of the 21st century. Regional and local changes in PM2.5 are larger, reaching upwards of 2 micro-g/cu m for polluted (eastern China) and dusty (western Africa) locations on an annually averaged basis in RCP8.5. Using multiple linear regression, we find that future PM2.5 concentrations are most sensitive to local temperature, followed by surface wind and precipitation. PM2.5 concentrations are robustly positively associated with temperature, while negatively related with precipitation and wind speed. Present-day (2006-2015) modeled sensitivities of PM2.5 to meteorological variables are evaluated against observations and found to agree reasonably well with observed sensitivities (within 10e50% over the eastern United States for several variables), although the modeled PM2.5 is less sensitive to precipitation than in the observations due to weaker convective scavenging. We conclude that the hypothesized "climate penalty" of future increases in PM2.5 is relatively minor on a global scale compared to the influence of emissions on PM2.5 concentrations.

PM2.5↗
NASA NTRSDate not supplied

Satellite-Assisted Particulate Matter (SAPM) for the Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group

Models, In situ, and Remote sensing of Aerosols (MIRA) is an international working group that aims to foster collaborations amongst these three major aerosol specialties. It consists of a collection of interdisciplinary and independently funded projects/topics with clearly-defined goals. Currently there are four MIRA topic areas, including Satellite-Assisted Particulate Matter (SAPM), which is focused specifically on fine particulate matter (PM2.5). The study of PM2.5 is important due to its significant contribution to air pollution and resultant, adverse human health effects. The goal of the SAPM topic group is to conduct and provide intercomparisons of various methods and techniques to obtain surface PM2.5 estimates assisted by satellite remote sensors, global aerosol models, and in situ aerosol measurements. Some benefits of space-based/model-assisted PM2.5 retrievals include providing PM2.5 approximations in regions with poor in situ ground station coverage and a means for assessing spatial/temporal PM2.5 variations on regional and/or global scales. Furthermore, benefits of spaceborne lidar/model-assisted PM2.5 retrievals include providing nighttime PM2.5 estimates and characterization of near-surface aerosol vertical structure. SAPM is seeking international datasets of mass scattering/absorption coefficient and aerosol hygroscopic properties for different aerosol species, as well as ground-based in situ PM2.5 measurements. In this poster presentation, we give an overview of SAPM, and show results from three recent/ongoing PM2.5 studies. These efforts involve deriving surface PM2.5 concentrations from two spaceborne lidars, the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and Cloud-Aerosol Transport System (CATS), and investigating key variables that impact the estimation of PM2.5 from model simulated aerosol optical depth (AOD) using the Goddard Earth Observing System (GEOS) model.

Travis D. Toth↗
NASA NTRS2020

Historical and Future Changes in Air Pollutants from CMIP6 Models

Poor air quality is currently responsible for large impacts on human health across the world. In addition, the air pollutants ozone (O3) and particulate matter less than 2.5 µm in diameter (PM2.5) are also radiatively active in the atmosphere and can influence Earth's climate. It is important to understand the effect of air quality and climate mitigation measures over the historical period and in different future scenarios to ascertain any impacts from air pollutants on both climate and human health. The Coupled Model Intercomparison Project Phase 6 (CMIP6) presents an opportunity to analyse the change in air pollutants simulated by the current generation of climate and Earth system models that include a representation of chemistry and aerosols (particulate matter). The shared socio-economic pathways (SSPs) used within CMIP6 encompass a wide range of trajectories in precursor emissions and climate change, allowing for an improved analysis of future changes to air pollutants. Firstly, we conduct an evaluation of the available CMIP6 models against surface observations of O3 and PM2.5. CMIP6 models consistently overestimate observed surface O3 concentrations across most regions and in most seasons by up to 16 ppb, with a large diversity in simulated values over Northern Hemisphere continental regions. Conversely, observed surface PM2.5 concentrations are consistently underestimated in CMIP6 models by up to 10 µg m−3, particularly for the Northern Hemisphere winter months, with the largest model diversity near natural emission source regions. The biases in CMIP6 models when compared to observations of O3 and PM2.5 are similar to those found in previous studies. Over the historical period (1850–2014) large increases in both surface O3 and PM2.5 are simulated by the CMIP6 models across all regions, particularly over the mid to late 20th century, when anthropogenic emissions increase markedly. Large regional historical changes are simulated for both pollutants across East and South Asia with an annual mean increase of up to 40 ppb for O3 and 12 µg m−3 for PM2.5. In future scenarios containing strong air quality and climate mitigation measures (ssp126), annual mean concentrations of air pollutants are substantially reduced across all regions by up to 15 ppb for O3 and 12 µg m−3 for PM2.5. However, for scenarios that encompass weak action on mitigating climate and reducing air pollutant emissions (ssp370), annual mean increases in both surface O3 (up 10 ppb) and PM2.5 (up to 8 µg m−3) are simulated across most regions, although, for regions like North America and Europe small reductions in PM2.5 are simulated due to the regional reduction in precursor emissions in this scenario. A comparison of simulated regional changes in both surface O3 and PM2.5 from individual CMIP6 models highlights important regional differences due to the simulated interaction of aerosols, chemistry, climate and natural emission sources within models. The projection of regional air pollutant concentrations from the latest climate and Earth system models used within CMIP6 shows that the particular future trajectory of climate and air quality mitigation measures could have important consequences for regional air quality, human health and near-term climate. Differences between individual models emphasise the importance of understanding how future Earth system feedbacks influence natural emission sources, e.g. response of biogenic emissions under climate change.

Air pollutants↗
NASA NTRS2007

Methods for Characterizing Fine Particulate Matter Using Satellite Remote-Sensing Data and Ground Observations: Potential Use for Environmental Public Health Surveillance

This study describes and demonstrates different techniques for surfacing daily environmental / hazards data of particulate matter with aerodynamic diameter less than or equal to 2.5 micrometers (PM2.5) for the purpose of integrating respiratory health and environmental data for the Centers for Disease Control and Prevention (CDC s) pilot study of Health and Environment Linked for Information Exchange (HELIX)-Atlanta. It described a methodology for estimating ground-level continuous PM2.5 concentrations using B-Spline and inverse distance weighting (IDW) surfacing techniques and leveraging National Aeronautics and Space Administration (NASA) Moderate Resolution Imaging Spectrometer (MODIS) data to complement The Environmental Protection Agency (EPA) ground observation data. The study used measurements of ambient PM2.5 from the EPA database for the year 2003 as well as PM2.5 estimates derived from NASA s satellite data. Hazard data have been processed to derive the surrogate exposure PM2.5 estimates. The paper has shown that merging MODIS remote sensing data with surface observations of PM2.5 not only provides a more complete daily representation of PM2.5 than either data set alone would allow, but it also reduces the errors in the PM2.5 estimated surfaces. The results of this paper have shown that the daily IDW PM2.5 surfaces had smaller errors, with respect to observations, than those of the B-Spline surfaces in the year studied. However the IDW mean annual composite surface had more numerical artifacts, which could be due to the interpolating nature of the IDW that assumes that the maxima and minima can occur only at the observation points. Finally, the methods discussed in this paper improve temporal and spatial resolutions and establish a foundation for environmental public health linkage and association studies for which determining the concentrations of an environmental hazard such as PM2.5 with good accuracy levels is critical.

Al-Hamdan, Mohammad Z.↗
NASA NTRSDate not supplied

Developing Satellite-Assisted Particulate Matter (SAPM) Estimates over India for the MIRA Working Group

The Models, In Situ, and Remote Sensing of Aerosols (MIRA) Working Group is an international collective that encourages collaboration among researchers from these three atmospheric aerosol communities. MIRA currently comprises five interdisciplinary and independently funded Topic Groups, each with specific goals, and involves requests for additional scientific datasets. The Satellite-Assisted Particulate Matter (SAPM) Topic Group, as part of MIRA, focuses on studying particulate matter smaller than 2.5 microns in diameter (PM2.5) due to its significant contribution to air pollution and its harmful effects on human health. While the annual mean PM2.5 levels are typically low (~5-15 μg/m³) across most of the contiguous United States (CONUS), other countries experience much higher concentrations (e.g., India). SAPM aims to compare different methods and techniques for obtaining surface PM2.5 proxies using spaceborne passive and active remote sensors, aerosol models, and in situ measurements. Ultimately, SAPM aims to provide more extensive coverage of PM2.5 concentrations than what is currently available from in situ ground stations, which are limited in some parts of the CONUS and large regions worldwide. Current SAPM members are exploring PM2.5 estimation techniques using active sensors. This presentation offers an overview of these techniques and highlights the strengths and limitations of each approach. These techniques include 1) spaceborne lidar (CALIOP: Cloud-Aerosol Lidar with Orthogonal Polarization) alone, and 2) a combination of spaceborne lidar (CATS: Cloud Aerosol Transport System) and a global aerosol transport model (GEOS: Goddard Earth Observing System). Additionally, we present a case study featuring our SAPM research in India, a country with high levels of PM2.5 concentrations (i.e., state-level annual means of ~100-200 μg/m³). Consistent spatial patterns in PM2.5 over India are found from the in situ data, CALIOP-based, and CATS/model-based methods, with the highest concentrations found in northern India near New Delhi. The gridded PM2.5 analysis yields high R values between in situ and CATS/model (~0.7) and between in situ and CALIOP nighttime (~0.9), as well as good agreement between CATS/model and CALIOP nighttime PM2.5 estimates (R = ~0.8 and slope = ~0.9). For current and future efforts, the SAPM Topic Group is actively seeking new collaborators, especially those working with in situ aerosol measurements, and is interested in acquiring additional aerosol datasets to improve and validate the PM2.5 proxies.

Travis D Toth↗
NASA NTRS2021

Air Pollution Scenario over Pakistan: Characterization and Ranking of Extremely Polluted Cities using Long-Term Concentrations of Aerosols and Trace Gases

Pakistan ranks third in the world in terms of mortality attributable to air pollution, with aerosol mass concentrations (PM2.5) consistently well above WHO (World Health Organization) air quality guidelines (AQG). However, regulation is dependent on a sparse network of air quality monitoring stations and insufficient ground data. This study utilizes long-term observations of aerosols and trace gases to characterize and rank the air pollution scenarios and pollution characteristics of 80 selected cities in Pakistan. Datasets used include (1) the Aqua and Terra (AquaTerra) MODIS (Moderate Resolution Imaging Spectroradiometer) Level 2 Collection 6.1 merged Dark Target and Deep Blue (DTB) aerosol optical depth (AOD) retrieval products; (2) the CAMS (Copernicus Atmosphere Monitoring Service) reanalysis PM1, PM2.5, and PM10 data; (3) the MERRA-2 (Modern-Era Retrospective analysis for Research and Applications, Version 2) reanalysis PM2.5 data, (4) the OMI (Ozone Monitoring Instrument) tropospheric vertical column density (TVCD) of nitrogen dioxide (NO2), and VCD of sulfur dioxide (SO2) in the Planetary Boundary Layer (PBL), (5) the VIIRS (Visible Infrared Imaging Radiometer Suite) Nighttime Lights data, (6) MODIS Collection 6 Version 2 global monthly fire location data (MCD14ML), (7) population density, (8) MODIS Level 3 Collection 6 land cover types, (9) AERONET (AErosol RObotic NETwork) Version 3 Level 2.0 data, and (10) ground-based PM2.5 concentrations from air quality monitoring stations. Potential Source Contribution Function (PSCF) analyses were performed by integrating with ground-based PM2.5 concentrations and the NOAA (National Oceanic and Atmospheric Administration) HYSPLIT (Hybrid Single-Particle Lagrangian Integrated Trajectory) air parcel back trajectories to identify potential pollution source areas which are responsible for extreme air pollution in Pakistan. Results show that the ranking of the top polluted cities depends on the type of pollutant considered and the metric used. For example, Jhang, Multan, and Vehari were characterized as the top three polluted cities in Pakistan when considering AquaTerra DTB AOD products; for PM1, PM2.5, and PM10 Lahore, Gujranwala, and Okara were the top three; for tropospheric NO2 VCD Lahore, Rawalpindi, and Islamabad and for PBL SO2 VCD Lahore, Mirpur, and Gujranwala. The results demonstrate that Pakistan’s entire population has been exposed to high PM2.5 concentrations for many years, with a mean annual value of 54.7 μg/cu. m, over all Pakistan from 2003 to 2020. This value exceeds Pakistan’s National Environmental Quality Standards (Pak-NEQS, i.e., <15 μg/cu. m annual mean) for ambient air defined by the Pakistan Environmental Protection Agency (Pak-EPA) as well as the WHO Interim Target-1 (i.e., mean annual PM2.5 <35 μg/cu. m). The spatial analyses of the concentrations of aerosols and trace gases in terms of population density, nighttime lights, land cover types, and fire location data, and the PSCF analysis indicate that Pakistan’s air quality is strongly affected by anthropogenic sources inside of Pakistan, with contributions from surrounding countries. Statistically significant positive (increasing) trends in PM1, PM2.5, PM10, tropospheric NO2 VCD, and SO2 VCD were observed in ~89%, ~67%, ~48%, 91%, and ~88% of the Pakistani cities (80 cities), respectively. This comprehensive analysis of aerosol and trace gas levels, their characteristics in spatio-temporal domains, and their trends over Pakistan, is the first of its kind. Results will be helpful to the Ministry of Climate Change (Government of Pakistan), Pak-EPA, SUPARCO (Pakistan Space and Upper Atmosphere Research Commission), policymakers, and the local research community to mitigate air pollution and its effects on human health.

Muhammad Bilal↗
NASA NTRSDate not supplied

Providing Satellite-Assisted Particulate Matter (SAPM) Estimates for the Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group

The Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group is an international forum that promotes collaboration amongst researchers of these three atmospheric aerosol communities. MIRA currently consists of a collection of five interdisciplinary and independently funded Topic groups with focused goals and generally involve requests for additional scientific datasets. Participants of the MIRA Satellite-Assisted Particulate Matter (SAPM) Topic group study particulate matter with diameters smaller than 2.5 microns (PM2.5), because of its substantial role in air pollution and the resulting negative impacts on human health. SAPM seeks to provide intercomparisons of different methods and techniques for obtaining surface PM2.5 proxies using spaceborne passive and active remote sensors, aerosol models, and in situ observations. The ultimate motivation of SAPM is to provide greater PM2.5 coverage than in situ ground stations, which are limited in some areas of the contiguous United States and large regions throughout the globe. In this poster presentation, we provide an overview of the PM2.5 estimation techniques applied by current SAPM team members, as well as the strengths and limitations of each technique. These approaches include spaceborne lidar (Cloud-Aerosol Lidar with Orthogonal Polarization) only, combined spaceborne lidar (Cloud Aerosol Transport System) and a model (Goddard Earth Observing System), and using aerosol optical depth (AOD) from a spaceborne passive remote sensor (Moderate Resolution Imaging Spectroradiometer) to explore city trends in AOD and relate those to city trends in PM2.5. Also in this poster presentation, we highlight results of our SAPM study of India, a country characterized by high levels of PM2.5 concentrations. We show the temporal and spatial variability of PM2.5 over India derived using various approaches and validation with ground-based in situ PM2.5 observations. The SAPM Topic group actively seeks additional collaborators, including those working with in situ aerosol measurements, and is interested in aerosol datasets to improve and/or validate the PM2.5 estimates.

Travis D Toth↗