Search NASA⌕ Search

SEARCH · Search NASA

Results for “PORTLAND CEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Chemical mechanisms and kinetic modeling of calcium aluminate cements hydration in diluted systems: Role of aluminium hydroxide formation

Calcium aluminate cements are niche cements used in the refractory industry and in non-structural applications for building chemistry with short return-to-service delay. The later applications use theses cements in combination with calcium sulfates for long-term stability. By being niche cements, the knowledge of calcium aluminate cements hydration is not as extensive as that of Portland cement. In the present paper, the calcium aluminate cements are studied in diluted suspensions as a function of different parameters such as the suspension concentration or the quantity of added calcium sulfates. The objective is to identify their baseline chemical mechanisms. This work demonstrates the essential role of hydroxide ions fluxes, i.e. quantity going in and out of the liquid phase per unit of time. The main quantitative flux is the formation of aluminium hydroxide but the activation of this reaction is difficult. This difficulty allows calcium aluminate to be used as cement by creating a dormant period (workability) for the overall reactivity. The identification of the key role of aluminium hydroxide formation explains the influence of the temperature, some mechanisms of setting admixtures and the early age of calcium aluminate cements.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemistry of the interaction between an alkoxysilane-based impregnation treatment and cementitious phases

Chemical compatibility with a wide range of materials is among the features that has driven the use of alkoxysilanes as consolidants in built structures. Such compatibility is particularly important in cementitious materials where the reaction with portlandite may generate C-S-H gel, one of the main hydration phases of OPC. The cementitious matrix is a complex system, however, and the reaction of its many phases with alkoxysilanes, while poorly understood, may determine treatment efficacy. This article describes a detailed study of the individual interactions between an oligomeric alkoxysilane-based impregnation treatment previously shown to interact with the portlandite present in cement paste and the cementitious phases generated in ordinary portland cement hydration. The findings show that both portlandite and C-S-H gel interact with the silicon oligomers in the hydrolysed impregnation treatment to generate a C-S-H gel (in the case of portlandite) and a rise in C-S-H gel mean chain length (MCL). Ettringite is also altered in the presence of alkoxysilanes, transforming to gypsum and AH{sub 3}. Its transformation generates a tetrahedral aluminium that is taken up into a high silicon gel sourced from the treatment to form an amorphous aluminosilicate gel. Monocarboaluminate and katoite also partially decompose in the interaction with the product, whereas gibbsite remains unaffected.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Use of kaolinite clays in development of a low carbon MgO-clay binder system

Magnesium oxide based cements may provide a promising alternative to the conventional Portland cement in many applications. This study investigates the feasibility of using calcined kaolinitic clay to produce an MgO binder. The MgO-based binder were prepared using a low kaolinite content clay and metakaolin and were compared with a silica fume system. Implications of the addition of magnesium carbonate in the binder were also investigated. Isothermal calorimetry, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) were used to study the hydration characteristics of the binder system whereas compressive strength and porosity were measured to determine mechanical and durability attributes. The economic and environmental aspects of the binder system is also discussed. Hydrotalcite like phases were clearly produced on hydration in the clay mixes containing carbonate additions. The compressive strength of clay mixes was at par or better compared to systems containing silica fume, and the clay systems had significantly lower porosity levels. The presence of magnesium carbonate further enhanced the physical properties of the clay mixes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Application of Interparticle Spacing Model to Maximize Filler Content in Cementitious Pastes

One of the most impactful ways to reduce embodied carbon of concrete in the near term is by partially replacing Portland cement with supplementary cementitious materials and/or fillers. This article describes an approach to reduce cement content in concrete through the development of high filler, low water (HFLW) cementitious pastes. Pastes with cement content as low as 50% (% weight of fines) were designed by applying models that maximize the packing density of the granular system and that consider the characteristics of the materials to calculate interparticle spacing (IPS), thereby allowing to obtain pastes with higher solids concentration and lower water demand. Strong correlations were found between IPS, the consistency index of the Herschel-Bulkley rheological model, and cement hydration kinetic parameters of binary and ternary pastes containing a Portland limestone cement and up to two different types of ground limestone. The approach showed to be feasible for the design of HFLW concrete paste fraction.

Antunes da Silva, Denise↗
DOE OSTI2024

Sulphate resistance of low‐clinker engineered cementitious composites examined by MicroXRF imaging

Abstract Engineered cementitious composites (ECC) are a class of high‐performing fibre‐reinforced cementitious materials recognised for their increased ductility and durability compared to conventional cement‐based materials, owing to their autogenously controlled tight crack widths, even when subjected to high strains. To reduce ECC's environmental impact, this research examines the use of a low‐clinker binder − limestone‐calcined clay cement (LC3) − as an alternative to portland cement (PC), along with fly ash to further reduce the clinker proportion and the embodied CO 2 of the formulations. In conventional concrete, LC3 hydrates to a denser microstructure resulting from the synergistic reaction between limestone and calcined clay. At the lower water contents typical of ECC and with the presence of fly ash, the influence of the binder composition on the microstructure is difficult to anticipate. To examine the influence of these compositional variables on microstructure, permeability and durability, the sulphate resistance of LC3‐based ECC is explored. Specifically, the ECC‐LC3 blends are designed with high clinker replacement rate of 75% by mass of binder and contain either conventional fly ash or reclaimed fly ash at 50% by mass of binder. Expansion of ECC‐LC3 samples subjected to standard sodium sulphate test conditions was measured up to 12 months and the depth of penetration of sulphates into the ECC‐LC3 of varying compositions was quantified using micro‐X‐Ray Fluorescence (microXRF) imaging and modelling. The expansion results show that the ECC‐LC3 formulations performed better than the PC samples and can provide adequate resistance to external sulphate attack, even when reclaimed fly ashes are used in place of the conventional ash. In addition, the shallow penetration of sulphate into these cementitious composites demonstrates the low diffusion coefficients values that were determined using the quantitative data from MicroXRF imaging.

Microscopy↗
DOE OSTI2021

Portlandite solubility and Ca2+ activity in presence of gluconate and hexitols

The current paper investigates the impact of gluconate, D-sorbitol, d-mannitol and D-galactitol on calcium speciation at high pH values by i) solubility measurements of portlandite (Ca(OH){sub 2}) and ii) potentiometric titration measurements of calcium salt solutions. Thermodynamic modelling was used to fit the chemical activities of Ca{sup 2+} and OH{sup −} ions and thus to determine the strength and kind of the different Ca-organic-hydroxide complexes. The strength of complex formation with Ca{sup 2+} decreases in the order gluconate ≫ sorbitol > mannitol > galactitol, which follows the same order as sorption on portlandite. Heteropolynuclear gluconate complexes with calcium and hydroxide dominate the Ca-speciation in the presence of portlandite, while for sorbitol ternary CaSorbOH{sup +} complexes were dominant under alkaline conditions. We expect that these results will help in better understanding the influence of gluconate and hexitols on the hydration of alite and Portland cement.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evaluation of microstructural changes in fresh cement paste using AC impedance spectroscopy vs. oscillation rheology and 1H NMR relaxometry

AC impedance spectroscopy (ACIS) is a promising technique for monitoring the microstructure evolution of fresh cement paste in real-time. This paper compared the change of bulk electric resistivity (ρ{sub bulk}) obtained from ACIS with the developments of storage modulus (G′) and the mean transverse relaxation times (T{sub 2}) of fresh Portland cement pastes within 5 h. It was found that the three different phases (Phase I, II, and III) on the microstructural build-up process of fresh paste can be accurately distinguished by analyzing ρ{sub bulk}, as well as G′ and T{sub 2}. The use of ρ{sub bulk} fails to characterize the microstructural changes in Phase I due to the great sensitivity on the electrical conductivity of the interstitial solution. However, it can successfully reflect the developing features of microstructure in Phases II and III, and reliably evaluate the impacts of water to cement ratio, superplasticizer, and supplementary cementitious materials on the microstructural development.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hydrophobic, Thermal Shock-and-Corrosion-Resistant XSBR Latex-Modified Lightweight Class G Cement Composites in Geothermal Well Energy Storage Systems

Energy losses can be significantly reduced if thermally insulating cement is used for energy storage and recovery. The thermal conductivity (TC) of the currently used cement is between 1 and 1.2 W/mK. In this study we assessed the ability of polystyrene (PS)–polybutadiene (PB)–polyacrylic acid (PAA) terpolymer (cross-linked styrene–butadiene rubber, XSBR) latex to improve thermal insulating properties and thermal shock (TS) resistance of class G ordinary Portland cement (OPC) and fly ash cenosphere (FCSs) composites in the temperature range of 100–175 °C. The composites autoclaved at 100 °C were subjected to three cycles, one cycle: 175 °C heat → 25 °C water quenching). In hydrothermal and thermal (TS) environments at elevated temperatures in cement slurries the XSBR latex formed acrylic calcium complexes through acid–base reactions, and the number of such complexes increased at higher temperatures due to the XSBR degradation with formation of additional acrylic groups. As a result, these complexes offered the following five advanced properties to the OPC-based composites: (1) enhanced hydrophobicity; (2) decreased water-fillable porosity; (3) reduced TC for water-saturated composites; (4) minimized loss of compressive strength, Young’s modulus, and compressive fracture toughness after TS; and (5) abated pozzolanic activity of FCSs, which allowed FCSs to persist as thermal insulators under strongly alkaline conditions of cement slurries. Additionally, XSBR-modified slurries possessed improved workability and decreased slurry density due to the air-entraining effect of latex, which resulted in further improvement of thermal insulation performance of the modified composites.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

3D Structure of Oil Droplets in Hardened Geopolymer Emulsions: Impact of Various Commercial Liquid Oils - 20184

Cement-based solidification/stabilization (S/S) is a widely applied technique for the immobilization of inorganic hazardous constituents. However, S/S is considered less compatible for organic liquid waste (OLW) because organic compounds may inhibit binder hydration. Geopolymers (i.e. alumino-silicate materials) are an alternative for applications in which Portland cements are inappropriate. In a previous work, we proposed a direct immobilization of organic liquid waste in a geopolymer binder (GEOIL composite). We demonstrated the feasibility for producing various composites on model system (hexadecane) and on a hydraulic oil, which are dispersed in the geopolymer binder as droplets (10-50 μm typical size). In nuclear facilities, legacy waste based on organic liquids are currently stored. Many of them have been used for various applications in the nuclear industry (lubrication, cutting, analysis, liquid/liquid extraction..) with very wide chemical compositions. In this study, we study the influence of various commercial organic oils immobilized in hardened geopolymer emulsions by X-ray micro-tomography. Image analysis make it possible to determine the 3D spatial and size distributions of oil droplets in geopolymer emulsions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

3D printing of calcined clay-limestone-based cementitious materials

This paper aims to investigate the influences of high Portland cement substitutions (>60 wt%) by low-grade calcined clay (CC) and limestone (LF) on 3D concrete printability, stiffness evolution and early-age hydration. Results show that, with the same dosage of admixtures (superplasticizer and viscosity modifier), increasing LF and CC content reduced the slump, flowability and initial material flow rate, and significantly improved the buildability of fresh mixtures, which can be attributed to the reduced water film thickness (WFT). Furthermore, the stiffness evolution and SSA{sub total} development up to the first 3 h were accelerated by increasing CC content, which can also be linked to the change of WFT, and consumption of superplasticizer for the dispersion induced by hydration products. Additionally, the dilution effect on compressive strength and hydration caused by the high cement replacement was observed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Assessment of Cementitious Composites for High-Temperature Geothermal Wells

High-temperature (HT) geothermal wells can provide green power 24 hours a day, 7 days a week. Under harsh environmental and operational conditions, the long-term durability requirements of such wells require special cementitious composites for well construction. This paper reports a comprehensive assessment of geothermal cement composites in cyclic pressure function laboratory tests and field exposures in an HT geothermal well (300–350 °C), as well as a numerical model to complement the experimental results. Performances of calcium–aluminate cement (CAC)-based composites and calcium-free cement were compared against the reference ordinary Portland cement (OPC)/silica blend. The stability and degradation of the tested materials were characterized by crystalline composition, thermo-gravimetric and elemental analyses, morphological studies, water-fillable porosity, and mechanical property measurements. All CAC-based formulations outperformed the reference blend both in the function and exposure tests. The reference OPC/silica lost its mechanical properties during the 9-month well exposure through extensive HT carbonation, while the properties of the CAC-based blends improved over that period. The Modified Cam-Clay (MCC) plasticity parameters of several HT cement formulations were extracted from triaxial and Brazilian tests and verified against the experimental results of function cyclic tests. These parameters can be used in well integrity models to predict the field-scale behavior of the cement sheath under geothermal well conditions.

15 GEOTHERMAL ENERGY↗
NASA NTRS2017

Hypervelocity Impact Testing of Materials for Additive Construction: Applications on Earth, the Moon, and Mars

Additive Construction is the process of building infrastructure such as habitats, garages, roads, berms, etcetera layer by layer (3D printing). The National Aeronautics and Space Administration (NASA) and the United States Army Corps of Engineers (USACE) are pursuing additive construction to build structures using resources available in-situ. Using materials available in-situ reduces the cost of planetary missions and operations in theater. The NASA team is investigating multiple binders that can be produced on planetary surfaces, including the magnesium oxide-based Sorel cement; the components required to make Ordinary Portland Cement (OPC), the common cement used on Earth, have been found on Mars. The availability of OPC-based concrete on Earth drove the USACE to pursue additive construction for base housing and barriers for military operations. Planetary and military base structures must be capable of resisting micrometeoroid impacts with velocities ranging from 11 to 72km/s for particle sizes 200 micrometers or more (depending on protection requirements) as well as bullets and shrapnel with a velocity of 1.036km/s with projectiles 5.66mm diameter and 57.40mm in length, respectively.

Hypervelocity Impact↗
DOE OSTI2022

Simulation of radiation damage via alpha decay in BFS:PC grouts using 4 He 2+ ion acceleration

The impact of alpha radiation on cements used to encapsulate intermediate-level waste (ILW) is not well understood. ILW wastes can contain high levels of alpha-emitting radionuclides, meaning that the grouts used to encapsulate them are exposed to significant ionising radiation. Thus, a damaged region could develop in the grout adjacent to the alpha-emitting species. This work attempted to recreate this behaviour through nonradioactive 4 He 2+ ion-accelerator experiments, which have not previously been applied to common encapsulation grouts. The influence of this irradiation on a slag-Portland cement was investigated at different ages via transmission electron microscopy energy-dispersive x-ray spectroscopy (TEM-EDX) and supporting techniques, to assess whether 4 He 2+ irradiation caused textural or chemical zonation. No significant changes in hydrate phases or textures were observed, other than minor variations associated with carbonation. This paper provides a proof of concept for using ion acceleration techniques on cements and furthers knowledge on their radiation response.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Requalification and Declaration of High-alpha Cemented TRU-waste from the Late 70's and Early 80's - 20499

KTE and Siemens launched a project to qualify a series of 391 waste drums and 115 concrete containers produced from 1979 to 1984. The waste is characterized by a high content of long-lived alpha-nuclides (TRU-waste - Pu, U, Am in the range of 1 E+11-1 E+12 Bq/ drum. This high radionuclide inventory requires a special packaging according to the waste acceptance criteria (WAC) of the repository Konrad [1] despite the fact, that the waste was treated manually. The raw waste originally was delivered in nitric acid solution and was solidified using ordinary Portland cement. The existing documentation comprises analyses, transfer documentation for the nuclear fuel nuclides and waste treatment documentation yielding information, which waste was treated together in a batch. Additionally all drums were subjected to non-destructive gamma-spectrometry assay. A small number of 7 drums were opened and sampled to support the existing declaration. For the entire series the waste products were attributed to defined batches using the accountancy data supported by the analyses and the gamma-spectrometry. Each batch was produced from a homogeneous stock of waste solution and can therefore be declared and documented together. The declaration concept is based on the gamma spectrometry results performed on the entire drums, which were corrected and extended for the uncertainty of the analyses. The declaration concept is verified by the regulator and its independent expert. The state of the project is in the documentation of the solidification campaigns followed by the planning of the container configuration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Chemical degradation of fly ash blended concrete with the seasonal variation of rainwater in a radioactive waste repository: A thermodynamic modeling approach

Highlights: • The thermodynamic model for the cementitious system was successfully developed. • The chemical degradation of concrete was greatly affected by rainwater types. • Inorganic carbon species in rainwater reduced the chemical resistance of concrete. • The durability of concrete to rainwater decreased with increasing fly ash content. This study presents a long-term degradation behavior of fly ash blended concrete in a vault type low- and intermediate-level radioactive waste (LILW) repository by thermodynamic equilibrium calculations using PHREEQC combined with CEMDATA18 database. Since rainwater plays a predominant role as leachate for the concrete waste container in the repository, the effect of chemical properties of seasonal rainwater on the chemical degradation of concrete was analyzed. In addition, the impact of the blending with fly ash on the chemical degradation was evaluated through a gradual replacement of ordinary Portland cement (OPC) by fly ash. Regardless of the replacement level, autumn rainwater showed the greatest influence on the concrete degradation owing to the presence of inorganic carbon species, which induce the carbonation. The resistance of concrete to chemical degradation by rainwater was persistently reduced due to the decreasing formation of portlandite and calcium silicate hydrate (C-S-H) with increasing replacement level.

36 MATERIALS SCIENCE↗
DOE OSTI2021

NOx sequestration by calcium aluminate cementitious materials

This study quantifies NO{sub x} uptake efficiency and explores NO{sub x} binding mechanisms in calcium aluminate cementitious (CAC) materials. Comparison between unmodified and TiO{sub 2}-modified CAC separates intrinsic NO{sub x} binding mechanisms from those related to photocatalysis. Attributed to surface-related heterogeneous reactions, the NO{sub x} binding occurs in unmodified CAC at nitrite-to-nitrate ratio of 1: 1.3 and can be increased with surface area. The photocatalytic reactions in TiO{sub 2}-modified CAC increase NO{sub x} uptake, and ~50% of converted NO{sub x} resists releasing back into the environment via dissolution. Compared to previously studied ordinary portland cement (OPC) materials, CAC increases NO{sub x} uptake capacity and demonstrates a more permanent NO{sub x} binding, potentially mitigating concerns related to the release of previously bound N-species in OPC. Examination of the interaction between NO{sub x} and a synthetic pure aluminum-bearing phase shows that the permanent NO{sub x} uptake in CAC could be largely attributed to the chemical binding of converted NO{sub x} within aluminum-bearing phases.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sequestration and release of nitrite and nitrate in alkali-activated slag: A route toward smart corrosion control

Intercalating the corrosion inhibitive ions in hydrotalcite is a promising approach to improve the long-term efficiency of inhibitors in corrosion protection of steel in reinforced concrete. In this work, the potential of autogenously generating nitrite- and nitrate-intercalated hydrotalcite in alkali-activated slag (AAS) is investigated. The results show that the added nitrite and nitrate ions are preferably uptaken in the interlayer structure of hydrotalcite in AAS, and the sequestered nitrite and nitrate are released upon chloride exposure in seawater and NaCl solution. The incorporation of nitrite and nitrate has little detrimental effects on the chloride binding capacity of AAS but slightly enhances the chloride ingress due to the pore coarsening effect. Similar to ordinary Portland cement (OPC), AAS is more permeable to the chloride in seawater than NaCl solution. However, unlike the release of bound chloride contributed by ettringite formation in seawater-exposed OPC, the enhanced chloride ingress in seawater-exposed AAS is primarily attributed to the aggravated pH reduction at the exposure front due to brucite formation. This study contributes to the design of alkali-activated binders with a smart inhibitor releasing ability for mitigating corrosion of steel in concrete.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Clinkerless ultra-high strength concrete based on alkali-activated slag at high temperatures

This work investigates the degradation mechanisms of clinkerless alkali-activated slag based ultra-high strength concrete (AAS-UHSC) upon exposure to high temperatures up to 800 °C. The heat-induced mechanical, mineralogical, molecular, microstructural, and pore structure alterations of AAS-UHSC prepared with various activator types, water-to-powder ratios, and fiber incorporation are studied. The results demonstrate the beneficial roles of potassium incorporation on improving the thermal stability and integrity of AAS-UHSC, via suppressing deleterious crystallization and transformation of aluminosilicate phases at high temperature. In contrast to Portland cement clinker-based UHSC, no sign of explosive spalling is observed in AAS-UHSC, likely due to the presence of microcracks that enhance the pore network connectivity. The mechanical degradation of AAS-UHSC at high temperature below 600 °C is resulted from dehydration and decomposition of phases and consecutive thermal cracking, together with enlarged porosity and coarsened pore structure. As the temperature rising to 800 °C, crystallization and transformation of phases, as well as formation of porous microstructure, considerably aggravate the mechanical degradation of AAS-UHSC. In contrast to the thermal damage mitigation by polymeric fibers in conventional UHSC, the fiber incorporation has little positive impact on the thermal resistance of AAS-UHSC.

36 MATERIALS SCIENCE↗