Silicon Contamination of the Praseodymium Doped Ceria Oxygen Surface Exchange Coefficient
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
While Cr poisoning of the oxygen reduction reaction (ORR) at SOFC cathodes is widely agreed to involve deactivation of oxygen exchange sites, the degradation mechanism remains ambiguous. Here, we selected an alternative cathode material Pr 0.1 Ce 0.9 O 2− δ , free of Sr segregation, to systematically investigate the effect of Cr-induced degradation in ORR. We expand on our previous studies in which the acidity/basicity of binary additives was found to be a strong indicator of the rate of oxygen surface exchange, by electrochemically investigating the ORR activity of the PCO cathode by impedance spectroscopy. Serial infiltration with acidic Cr-based oxides was found to degrade ORR activity as reflected in a 20-fold increase in area specific resistance (ASR) without corresponding changes in activation energy, with the opposite trend obtained with Ca-based oxides. Detected changes in total capacitance, attributed to changes in surface capacitance, also suggest depressed/enhanced PCO surface redox behavior with Cr/Ca-based infiltrants. Taken together, these results point to a more universal source of ORR poisoning/activation, based on acidity/basicity, rather than physical blocking of active sites. With this improved understanding, one can expect progress to be made in the coming years in optimizing means for protecting catalytic surfaces from degradation and/or improving their performance.
Dataset posted on 2025-03-04, 15:29 authored by Henry La Pierre, Andrew Boggiano, Chad Studvick, Sabyasachi Roy Chowdhury, Julie Niklas, Haruko Tateyama, Hongwei Wu, Johannes Leisen, Florian Kleemiss, Bess Vlaisavljevich, Ivan Popov
Excited states of Ce-138 and Pr-138 determined from beta decay of Pr-138, Pr-138m, and Nd-138
Explore the source record for details and available documents.
Recently, we have reported a significant enhancement in the electronic and thermoelectric properties of bulk polycrystalline SrTiO{sub 3} ceramics via praseodymium doping. This improvement was originated from the simultaneous enhancement in the thermoelectric power factor and reduction in thermal conductivity, which was contributed to the non-uniform distribution of Pr dopants. In order to further understand the underlying mechanism, we herein investigate the role of praseodymium doping source (Pr{sub 2}O{sub 3} versus Pr{sub 6}O{sub 11}) on the synthesis and electronic transport in Pr-doped SrTiO{sub 3} ceramics. It was observed that the high-temperature electronic transport properties are independent of the choice of praseodymium doping source for samples prepared following our synthesis strategy. Theoretical calculations were also performed in order to estimate the maximum achievable power factor and the corresponding optimal carrier concentration. The result suggests the possibility of further improvement of the power factor. This study should shed some light on the superior electronic transport in bulk polycrystalline Pr-doped SrTiO{sub 3} ceramics and provide new insight on further improvement of the thermoelectric power factor.
Abstract Reacting praseodymium(IV) oxide with oxygen at 27 GPa in a diamond anvil cell yielded the oxide peroxide Pr 2 IV (O 2 )O 3 , which was characterized by single crystal X‐ray diffraction on multi‐grain samples, Raman spectroscopy and quantum theoretical calculations at various pressure points. The presence of tetravalent praseodymium ions is supported by electronic structure calculations, showing a band gap of ca. 1.2 eV, which is consistent with the anticipated chemical model of an ionic solid. Pr 2 (O 2 )O 3 thus far represents the most oxygen rich phase of any binary compound of a lanthanoid and oxygen and is the first example of a peroxide anion next to Pr 4+ . Additionally, these results demonstrate that instead of oxidizing the praseodymium ions past their +IV oxidation state, oxygen undergoes a comproportionation to form peroxide anions. Direct oxidation of the oxide anions by Pr 4+ ‐ions was ruled out by a control experiment in argon instead of oxygen, where no oxidation of oxide ions was observed.
The separation of rare earth elements (REEs) using solvent extraction adding complexing agents appears to be an alternative to saponification of the extractant. We evaluated the effect of lactic acid concentration on didymium (praseodymium and neodymium) and lanthanum extraction with 2-ethylhexyl phosphonic acid mono-2-ethyl hexyl ester [HEH(EHP)] as extractant. First, we investigated in batch experiments the separation of lanthanum (La) and didymium (Pr and Nd) using McCabe–Thiele diagrams to estimate the number of extraction stages when the feed solution was or was not conditioned with lactic acid. Additionally, we conducted continuous liquid–liquid extraction experiments and evaluated the influence of lactic acid concentration on the REE extraction and separation. The tests showed that the extraction percentage of REEs and the separation factor Pr/La increased when the lactic acid concentration increased, but the didymium purity decreased. Lanthanum, praseodymium, and neodymium extraction rate were 23.0, 89.7, and 99.2 pct, respectively, with 1:1 aqueous/organic volume flow rate and feed solution doped with 0.52 mol L{sup −1} lactic acid. The highest didymium purity reached was 92.0 pct with 0.26 mol L{sup −1} lactic acid concentration.
Rare-earth (RE) ions doped into desired locations of optical crystals might enable a range of novel integrated photonic devices for quantum applications. With this aim, we have investigated the production yield of cerium and praseodymium by means of ion implantation. As a measure, the collected fluorescence intensity from both implanted samples and single centers was used. With a tailored annealing procedure for cerium, a yield up to 53% was estimated. Praseodymium yield amounts up to 91%. Such high implantation yield indicates a feasibility of creation of nanopatterned rare-earth doping and suggests strong potential of RE species for on-chip photonic devices.
The results of the comparative study of the modification of the temperature dependences of the Nernst–Ettingshausen coefficient Q in the normal phase of two series of the samples of the Y{sub 1 –} {sub x}Pr{sub x}Ba{sub 2}Cu{sub 3}O{sub y} and Y{sub 0.85 –} {sub x}Pr{sub x}Ca{sub 0.15}Ba{sub 2}Cu{sub 3}O{sub y} compositions due to praseodymium doping are presented. The specific features of dependences Q(T) and Q{sub 300 K}(T) appeared as additional calcium ions exist in the YBa{sub 2}Cu{sub 3}O{sub y} lattice have been revealed and analyzed. It is shown that dependences Q(T) and the temperature dependences of the thermopower coefficient obtained for the same samples previously are completely described in terms of the narrow-band model for both systems under study. The charge carrier mobilities and the degrees of asymmetry of the dispersion law are determined using a quantitative analysis of the experimental data. It is shown that the existence of additional calcium ions in the lattice does not influence a change in the asymmetry of the dispersion law with an increase in the praseodymium content, but strongly influences the character of changing the mobility. The found dependence of the mobility on the level of doping in the two systems and the observed difference in the characters of the changes in the absolute values of the thermopower coefficient and the Nernst–Ettingshausen coefficient in the Y{sub 0.85 –} {sub x}Pr{sub x}Ca{sub 0.15}Ba{sub 2}Cu{sub 3}O{sub y} system are explained on the basis of the analysis of the mechanisms of influence of the energy spectrum parameters on the charge carrier mobility in the YBa{sub 2}Cu{sub 3}O{sub y} system.
Abstract Cobalt oxides have long been understood to display intriguing phenomena known as spin-state crossovers, where the cobalt ion spin changes vs. temperature, pressure, etc. A very different situation was recently uncovered in praseodymium-containing cobalt oxides, where a first-order coupled spin-state/structural/metal-insulator transition occurs, driven by a remarkable praseodymium valence transition. Such valence transitions, particularly when triggering spin-state and metal-insulator transitions, offer highly appealing functionality, but have thus far been confined to cryogenic temperatures in bulk materials (e.g., 90 K in Pr 1- x Ca x CoO 3 ). Here, we show that in thin films of the complex perovskite (Pr 1- y Y y ) 1- x Ca x CoO 3-δ , heteroepitaxial strain tuning enables stabilization of valence-driven spin-state/structural/metal-insulator transitions to at least 291 K, i.e., around room temperature. The technological implications of this result are accompanied by fundamental prospects, as complete strain control of the electronic ground state is demonstrated, from ferromagnetic metal under tension to nonmagnetic insulator under compression, thereby exposing a potential novel quantum critical point.
This paper will be submitted to the ACS journal, Analytical Chemistry. Abstract. The absorption spectra for single component mixtures of erbium(III) chloride, holmium(III) chloride, neodymium(III) chloride, praseodymium(III) chloride, samarium(III) chloride and thulium(III) chloride were obtained in 3 LiCl – 2 CsCl at 723 K. The absorption spectra were collected at various concentrations from 0 mM to approximately 200 mM (above which the solutions became saturated). Using this data and Beer’s law, molar absorptivities for the absorbance peaks for each lanthanide(III) chloride were obtained. Using the collection of single component spectra, multivariate regression models were created for each lanthanide metal studied. These models were validated against a new set of absorption spectra containing multicomponent mixtures of the selected lanthanides in the molten salt solution. Results of the regression models and predictions on the validation set of data are presented.
It is well-known that M. trichosporium OB3b has two forms of methane monooxygenase responsible for the initial conversion of methane to methanol, a cytoplasmic (soluble) methane monooxygenase (sMMO) and a membrane-associated (particulate) methane monooxygenase (pMMO) and that copper strongly regulates expression of these alternative forms of MMO. More recently, it has been discovered that M. trichosporium OB3b has multiple types of the methanol dehydrogenase (MeDH), i.e. the Mxa-MeDH and Xox-MeDH, and the expression of these two forms is regulated by the availability of the rare earth element, cerium. Here we extend these studies and show that lanthanum, praseodymium, neodymium and samarium also regulate expression of alternative forms of MeDH. The effect of these rare earth elements on MeDH expression, however, was only observed in the absence of copper. Further, a mutant of M. trichosporium OB3b where the Mxa-MeDH was knocked out was able to grow in the presence of lanthanum, praseodymium and neodymium, but was not able to grow in the presence of samarium. In conclusion, collectively these data suggest that multiple levels of gene regulation by metals exist in M. trichosporium OB3b but that copper overrides the effect of other metals by an as yet unknown mechanism.
A number of praseodymium-containing cobalt perovskites undergo temperature-dependent metal-insulator transitions that involve a transfer of electrons between cobalt and praseodymium cations. We have used high- resolution inelastic x-ray scattering to directly measure the changes in the acoustic phonon dispersion through this transition in one such single crystal, (Pr 0.85 Y 0.15 )(0.)7Ca 0.3 CoO 3-$\delta$ , in an effort to understand the role of the lattice in the transition. Transverse and acoustic modes were measured in the pseudocubic (200), (220), and (222) zones both above and below the transition temperature. The resultant dispersion curves reveal that the transition is associated with a significant hardening of the pseudocubic C 11 elastic constant, whereas C 12 and C 44 do not significantly change. Here, analysis of the temperature-dependent damping of the longitudinal acoustic mode in the (200) zone reveals a peak in the damping at temperatures just above the transition temperature. Significant elastic diffuse scattering is also observed above the transition temperature, likely resulting from clusters in which the electron transfer is beginning to occur as a precursor to the phase transition. The presence of these clusters likely limits the phonon lifetimes, thus leading to the observed damping.
For some intermetallic compounds containing lanthanides, structural transitions can result in intermediate electronic states between trivalency and tetravalency; however, this is rarely observed for praseodymium compounds. The dominant trivalency of praseodymium limits potential discoveries of emergent quantum states in itinerant 4$f$ 1 systems accessible using Pr 4+ -based compounds. Here, we use in situ powder x-ray diffraction and in situ electron energy-loss spectroscopy (EELS) to identify an intermetallic example of a dominantly Pr 4+ state in the polymorphic system Pr 2 Co 3 Ge 5 . The structure-valence transition from a nearly full Pr 4+ electronic state to a typical Pr 3+ state shows the potential of Pr-based intermetallic compounds to host valence-unstable states and provides an opportunity to discover previously unknown quantum phenomena. In addition, this work emphasizes the need for complementary techniques like EELS when evaluating the magnetic and electronic properties of Pr intermetallic systems to reveal details easily overlooked when relying on bulk magnetic measurements alone.
Phase instability in praseodymium nickelates is a major concern for the long-term operations of solid oxide fuel cells since it may lead to the performance degradation. In this work, praseodymium nickelates (ex. Pr 2 NiO 4+δ ) have been stabilized via substitution on both Pr- and Ni-sites. Systematic studies over a wide range of compositions were conducted via long-term thermal annealing studies (T ≤ 870°C) and electrochemical tests in full cells. Proposed (Pr 0.50 Nd 0.50 ) 2 Ni 1-y Cu y O 4+δ compositions (y = 0.05, 0.10, 0.20, and 0.30) showed the most promising results and serve as a comprehensive extension to our previous studies in this series of papers. A stable long-term performance was obtained for temperatures up to 790°C for 500 hours at 0.80 V with a minimal tradeoff between the activity (power density of 0.8–1.0 W cm -2 at 850°C) and performance stability. A preserved parent phase and suppressed performance degradation, when compared to Pr 2 NiO 4+δ , make newly developed electrodes attractive candidates for the state-of-the-art solid oxide fuel cell applications.
This study is to complement an early report (the manuscript is attached for review purpose) on the role of interlayer on activity and performance stability in praseodymium nickelates. The aforementioned report showed a remarkable 48% increase in power density while switching from common GDC interlayer to a new interlayer chemistry (PGCO). Furthermore, a stable long-term performance was linked with suppressed reaction between the cathode and PGCO interlayer. In this article, we report in situ studies of the phase evolution. The high energy XRD studies at a synchrotron source showed fully suppressed phase transition in praseodymium nickelates with PGCO interlayer, while the electrodes on the GDC interlayer undergo substantial phase transformation. Furthermore, in operando and post-test XRD analyses shown fully suppressed structural changes in electrodes operated in full cells at 750°C and 0.80 V for 500 hours. SEM-EDS analysis showed that the formation of PrO x at the cathode-interlayer interface may play a role in a decrease of mechanical integrity of the interfaces, due to thermal expansion mismatch, leading to a local stress between the two phases. Furthermore, phase evolution at a narrow interface may propagate toward the electrode bulk, leading to structural changes Q1 and performance degradation.