Search NASA⌕ Search

SEARCH · Search NASA

Results for “PYRAMID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Using the Gerchberg-Saxton algorithm to reconstruct nonmodulated pyramid wavefront sensor measurements

Adaptive optics (AO) is a technique to improve the resolution of ground-based telescopes by correcting, in real-time, optical aberrations due to atmospheric turbulence and the telescope itself. With the rise of Giant Segmented Mirror Telescopes (GSMT), AO is needed more than ever to reach the full potential of these future observatories. One of the main performance drivers of an AO system is the wavefront sensing operation, consisting of measuring the shape of the above mentioned optical aberrations. Aims. The non-modulated pyramid wavefront sensor (nPWFS) is a wavefront sensor with high sensitivity, allowing the limits of AO systems to be pushed. The high sensitivity comes at the expense of its dynamic range, which makes it a highly non-linear sensor. We propose here a novel way to invert nPWFS signals by using the principle of reciprocity of light propagation and the Gerchberg-Saxton (GS) algorithm. We test the performance of this reconstructor in two steps: the technique is first implemented in simulations, where some of its basic properties are studied. Then, the GS reconstructor is tested on the Santa Cruz Extreme Adaptive optics Laboratory (SEAL) testbed located at the University of California Santa Cruz. This new way to invert the nPWFS measurements allows us to drastically increase the dynamic range of the reconstruction for the nPWFS, pushing the dynamics close to a modulated PWFS. The reconstructor is an iterative algorithm requiring heavy computational burden, which could be an issue for real-time purposes in its current implementation. However, this new reconstructor could still be helpful in the case of many wavefront control operations. In conclusion, this reconstruction technique has also been successfully tested on the Santa Cruz Extreme AO Laboratory (SEAL) bench where it is now used as the standard way to invert nPWFS signal.

47 OTHER INSTRUMENTATION↗

Developing parallel GeoFEST(P) using the PYRAMID AMR library

The PYRAMID parallel unstructured adaptive mesh refinement (AMR) library has been coupled with the GeoFEST geophysical finite element simulation tool to support parallel active tectonics simulations. Specifically, we have demonstrated modeling of coseismic and postseismic surface displacement due to a simulated Earthquake for the Landers system of interacting faults in Southern California. The new software demonstrated a 25-times resolution improvement and a 4-times reduction in time to solution over the sequential baseline milestone case. Simulations on workstations using a few tens of thousands of stress displacement finite elements can now be expanded to multiple millions of elements with greater than 98% scaled efficiency on various parallel platforms over many hundreds of processors. Our most recent work has demonstrated that we can dynamically adapt the computational grid as stress grows on a fault. In this paper, we will describe the major issues and challenges associated with coupling these two programs to create GeoFEST(P). Performance and visualization results will also be described.

adaptive mesh refinement (AMR)↗

Rational Design of Capacitive Pressure Sensors Based on Pyramidal Microstructures for Specialized Monitoring of Biosignals

Abstract There is an increasing demand for specialized pressure sensors in various applications. Previously, capacitive pressure sensors have been shown to have wide versatility in use, with a high degree of potential tuning possible through manipulating the geometry or material selection of the dielectric layer. However, in order to make sensors that are tunable and predictable, the design and fabrication method first needs to be developed. Presented here is an improved fabrication method to achieve tunable, consistent, and reproducible pressure sensors by using a pyramid microstructured dielectric layer along with a lamination layer. The as‐produced sensor performance is able to match predicted trends. Further, a simple model based on this system is developed and its efficacy is experimentally confirmed. Then, the model to predict a wide range of material and microstructure geometric properties prior to device fabrication is used to provide trends on sensor performance. Finally, it is demonstrated that the new method can be used to targetedly design a pressure sensor for a specific application—in vitro pulse sensing.

Ruth, Sara Rachel Arussy↗

β-Amyloid Peptide Antagonizes the Effect of Protons on Taurine-Induced Chloride Current in Rat Hippocampal Pyramidal Neurons

Taurine is an important endogenous agonist of glycine receptors (GlyR). Using the patchclamp technique, we measured chloride current induced by a short (600 msec) application of taurine (I{sub Tau}) on isolated rat pyramidal neurons. pH of taurine solution in the applicator pipette was neutral (7.4) or acidic (7.0-5.0). Application of protons to a neuron causes a dosedependent decrease in the peak amplitude and acceleration of I{sub Tau} desensitization. Addition of 100 nM β-amyloid peptide (Aβ) to the perfusate caused acceleration of I{sub Tau} desensitization. The effects of Aβ and H{sup +} on the rate of I{sub Tau} desensitization were not additive. In addition, Aβ attenuated the effect of H{sup +} on the peak amplitude of I{sub Tau}. We also studied the effect of protons on the chloride current caused by activation of GABA receptors. In contrast to H{sup +} effects on GlyR, Aβ did not modulate the effects of H{sup +} on GABA receptors.

60 APPLIED LIFE SCIENCES↗

Photo-controlled release of paclitaxel and model drugs from RNA pyramids

Stimuli-responsive release of drugs from a nanocarrier in spatial-, temporal-, and dosage-controlled fashions is of great interest in the pharmaceutical industry. Paclitaxel is one of the most effective and popular chemotherapeutic drugs against a number of cancers such as metastatic or nonmetastatic breast cancer, non–small cell lung cancer, refractory ovarian cancer, AIDS-related Kaposi’s sarcoma, and head and neck cancers. Here, by taking the advantage of RNA nanotechnology in biomedical and material science, we developed a three-dimensional pyramid-shaped RNA nanocage for a photocontrolled release of cargo, using paclitaxel as a model drug. The light-triggered release of paclitaxel or fluorophore Cy5 was achieved by incorporation of photocleavable spacers into the RNA nanoparticles. Upon irradiation with ultraviolet light, cargos were rapidly released (within 5 min). In vitro treatment of breast cancer cells with the RNA nanoparticles harboring photocleavable paclitaxel showed higher cytotoxicity as compared to RNA nanoparticles without the photocleavable spacer. The methodology provides proof of concept for the application of the light-triggered controlled release of drugs from RNA nanocages.

59 BASIC BIOLOGICAL SCIENCES↗

Copper Clusters Containing Hydrides in Trigonal Pyramidal Geometry

Structurally precise copper hydrides [Cu 11 H 2 {S 2 P(O i Pr) 2 } 6 (C≡CR) 3 ], R = Ph (1), C 6 H 4 F (2), and C 6 H 4 OMe (3), were first synthesized from the polyhydrido copper cluster [Cu 20 H 11 {S 2 P(O i Pr) 2 } 9 ] with nine equivalents of terminal alkynes. Later, their isolated yields were significantly improved by direct synthesis from [Cu(CH 3 CN) 4 ](PF 6 ), [NH 4 ][S 2 P(O i Pr) 2 ], NaBH 4 , and alkynes along with NEt 3 in THF. 1, 2, and 3 were fully characterized by single-crystal X-ray diffraction, ESI-MS, and multinuclear NMR spectroscopy. All three clustershave 11 copper atoms, adopting 3,3,4,4,4-pentacapped trigonal prismatic geometry, with two hydrides inside the Cu 11 cage, the position of which was ascertained by a single-crystal neutron diffraction structure of cluster 1 co-crystallized with a [Cu 7 (H){S 2 P(O i Pr) 2 } 6 ] (4) cluster. Six dithiophosphate and three alkynyl ligands stabilize the Cu 11 H 2 core in which the two hydrides adopt a trigonal pyramidal coordination mode. This coordination mode is so far unprecedented for hydride. The 1 H NMR resonance frequency of the two hydrides appears at 4.8 ppm, a value further confirmed by 2 H NMR spectroscopy for their deuteride derivatives [Cu 11 (D) 2 {S 2 P(O i Pr) 2 } 6 (C≡CR) 3 ]. A DFT investigation allows understanding the bonding within this new type of copper(I) hydrides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamically Driven Formation of Intercalated Cu Carpets from Supported Cu Pyramids on MoS 2

Thermodynamic and kinetic analyses based on our first-principles density functional theory calculations are used to interpret the experimentally observed formation of Cu carpets intercalated under the top layer of a 2H-MoS 2 substrate. Spontaneous Cu transport from Cu pyramids on top of the MoS 2 substrate through surface point defects to the growing Cu carpet is shown to be driven by a slightly lower chemical potential for the Cu carpet. We demonstrate that the competition between a preference for a thicker Cu carpet and the cost of elastic stretching of the top MoS 2 layer results in a selected Cu carpet thickness. Furthermore, we also propose that Cu transport occurs primarily via vacancy-mediated diffusion through constricting point defect portals.

36 MATERIALS SCIENCE↗

Substantial Cd-Cd Bonding in Ca6PtCd11: A Condensed Intermetallic Phase Built of Pentagonal Cd7 and Rectangular Cd4/2Pt Pyramids

The new trail-breaking compound Ca6PtCd11 has been synthesized and its structural and bonding properties investigated. This unusual phase features an unprecedented degree of cadmium aggregation, including linear chains, novel Cd7 PBP aggregates, and edge-shared chains of PtCd4/2 square pyramids. Manifestations of this chemistry elsewhere has evidently been precluded in earlier work by the inclusion of larger amounts of the strong d-metal bonding Au or Pt. Under the right conditions Cd seems quite effective as an open s,p-band metal.

36 MATERIALS SCIENCE↗

Pyramidal inversion domain boundaries revisited

The structure of pyramidal inversion domain boundaries in GaN:Mg was investigated by aberration corrected transmission electron microscopy. The analysis shows the upper (0001) boundary to consist of a single Mg layer inserted between polarity inverted GaN layers in an abcab stacking. The Mg bound in these defects is at least one order of magnitude lower than the chemical Mg concentration. Temperature dependent Hall effect measurements show that up to 27% of the Mg acceptors is electrically compensated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large pyramid shaped single crystals of BiFeO{sub 3} by solvothermal synthesis method

Synthesis parameters are optimized in order to grow single crystals of multiferroic BiFeO{sub 3}. 2 to 3 mm size pyramid (tetrahedron) shaped single crystals were successfully obtained by solvothermal method. Scanning electron microscopy with EDAX confirmed the phase formation. Raman scattering spectra of bulk BiFeO3 single crystals have been measured which match well with reported spectra.

36 MATERIALS SCIENCE↗

Optimal design at inner core of the shaped pyramidal truss structure

Sandwich material is a type of composite material with lightweight, high strength, good dynamic properties and high bending stiffness-to-weight ratio. This can be found well such structures in the nature (for example, internal structure of bones, plants, etc.). New trend which prefers eco-friendly products and energy efficiency is emerging in industries recently. Demand for materials with high strength and light weight is also increasing. In line with these trends, researches about manufacturing methods of sandwich material have been actively conducted. In this study, a sandwich structure named as “Shaped Pyramidal Truss Structure” is proposed to improve mechanical strength and to apply a manufacturing process suitable for massive production. The new sandwich structure was designed to enhance compressive strength by changing the cross-sectional shape at the central portion of the core. As the next step, optimization of the shape was required. Optimization technique used here was the SZGA(Successive Zooming Genetic Algorithm), which is one of GA(Genetic Algorithm) methods gradually reducing the area of design variable. The objective function was defined as moment of inertia of the cross-sectional shape of the strut. The control points of cubic Bezier curve, which was assumed to be the shape of the cross section, were used as design variables. By using FEM simulation, it was found that the structure exhibited superior mechanical properties compared to the simple design of the prior art.

97 MATHEMATICS AND COMPUTING↗

Mechanism of β-FeSi{sub 2} precipitates growth-and-dissolution and pyramidal defects' formation during oxidation of Fe-contaminated silicon wafers

Fe-implanted Si-wafers have been oxidized at 900 °C and 1100 °C in order to investigate the behaviour of Fe atoms at the growing SiO{sub 2}/Si interface and the impact on the integrity of microelectronic devices of an involuntary Fe contamination before or during the oxidation process. As-implanted and oxidized wafers have been characterized using secondary ion mass spectroscopy, atom probe tomography, and high-resolution transmission electron microscopy. Experimental results were compared to calculated implantation profiles and simulated images. Successive steps of iron disilicide precipitation and oxidation were evidenced during the silicon oxidation process. The formation of characteristic pyramidal-shaped defects, at the SiO{sub 2}/Si interface, was notably found to correlate with the presence of β-FeSi{sub 2} precipitates. Taking into account the competitive oxidation of these precipitates and of the surrounding silicon matrix, dynamic mechanisms are proposed to model the observed microstructural evolution of the SiO{sub 2}/Si interface, during the growth of the silicon oxide layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Defect-engineered optical bandgap in self-assembled TiO{sub 2} nanorods on Si pyramids

Transformation of self-assembled crystalline TiO{sub 2} nanorods to amorphous layer, and the corresponding impact on optical-bandgap (E{sub g}) on Si pyramids are investigated by irradiating with 50 keV Ar{sup +}-ions. Initially, E{sub g} is found to be reduced from 3.23 to 2.94 eV up to a fluence of 1 × 10{sup 16} ions/cm{sup 2}, and discussed in terms of the rise in oxygen vacancies (V{sub O}). However, a sudden increase in E{sub g} to 3.38 eV is detected at a fluence of 1 × 10{sup 17} ions/cm{sup 2} through evolution of voids by over-saturating V{sub O}, manifesting the appearance of degenerate states by shifting the Fermi level above the conduction band minimum via Burstein-Moss effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic band structure and optical gain of GaN{sub x}Bi{sub y}As{sub 1−x−y}/GaAs pyramidal quantum dots

The electronic band structure and optical gain of GaN{sub x}Bi{sub y}As{sub 1−x−y}/GaAs pyramidal quantum dots (QDs) are investigated using the 16-band k ⋅ p model with constant strain. The optical gain is calculated taking both homogeneous and inhomogeneous broadenings into consideration. The effective band gap falls as we increase the composition of nitrogen (N) and bismuth (Bi) and with an appropriate choice of composition we can tune the emission wavelength to span within 1.3 μm–1.55 μm, for device application in fiber technology. The extent of this red shift is more profound in QDs compared with bulk material due to quantum confinement. Other factors affecting the emission characteristics include virtual crystal, strain profile, band anticrossing (BAC), and valence band anticrossing (VBAC). The strain profile has a profound impact on the electronic structure, specially the valence band of QDs, which can be determined using the composition distribution of wave functions. All these factors eventually affect the optical gain spectrum. With an increase in QD size, we observe a red shift in the emission energy and emergence of secondary peaks owing to transitions or greater energy compared with the fundamental transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-aligned grating couplers on template-stripped metal pyramids via nanostencil lithography

We combine nanostencil lithography and template stripping to create self-aligned patterns about the apex of ultrasmooth metal pyramids with high throughput. Three-dimensional patterns such as spiral and asymmetric linear gratings, which can couple incident light into a hot spot at the tip, are presented as examples of this fabrication method. Computer simulations demonstrate that spiral and linear diffraction grating patterns are both effective at coupling light to the tip. The self-aligned stencil lithography technique can be useful for integrating plasmonic couplers with sharp metallic tips for applications such as near-field optical spectroscopy, tip-based optical trapping, plasmonic sensing, and heat-assisted magnetic recording.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗