Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle Volumes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Shock and contact interaction with a simple cubic array of particles

Shock-particle interaction is a fundamental pillar of multiphase compressible flows that has been studied at length for many decades. However, little attention has been paid to the interaction of particles with a contact interface that follows a shock in shock tube experiments and applications relating to blast waves. Presently, the phenomenon is studied at the microscale via particle resolved simulations of shock contact systems interacting with a structured array of particles as well as isolated particles. Simulations are conducted at particle volume fractions of 0%, 5%, 10%, 20%, and 40% at three contact Mach numbers. Additionally, the diaphragm position is varied, which controls the timing of the shock arrival time in relation to the contact arrival time. The modification to the drag on these stationary particles by the contact is analyzed and compared to the compressible Maxey–Riley–Gatignol model, which is adequate for the single particle cases but does not account for fluid mediated particle–particle interactions.

Mechanics↗
DOE OSTI2023

Simulation of a TRISO MiniFuel irradiation experiment with data-informed uncertainty quantification

An irradiation experiment using tristructural isotropic (TRISO) fuel particles and the miniature fuel (MiniFuel) irradiation vehicle was performed in Oak Ridge National Laboratory’s High Flux Isotope Reactor (HFIR) to support development of the Kairos Power fluoride salt–cooled, high-temperature reactor (KP-FHR). Here, this paper describes modeling predictions of temperatures and fuel burnup for the as-built experiment. An uncertainty quantification (UQ) analysis was performed to determine the effect of TRISO particle volume and position on the temperature predictions at various fuel heat generation rates (HGRs). This UQ study utilized fuel kernel position and volume measurements previously collected using X-ray computed tomography (XCT) techniques and Monte Carlo sampling methods to generate fuel compact cases that were then analyzed using a finite element thermal model. The UQ analysis indicated that uncertainty in calculated temperatures caused by varying TRISO particle arrangement is relatively small, even at high fuel HGR. Final predictions of particle temperatures throughout the irradiation are shown to be relevant to KP-FHR normal and off-normal operating conditions and to previous TRISO irradiation experiments. The combination of XCT with UQ analyses will inform post-irradiation examination (PIE) of the irradiated fuel compacts, and these analyses can be used to develop fuel performance models for coated particle fuel forms. Both PIE of separate-effects irradiation data and enhanced fuel performance modeling support accelerated qualification of TRISO fuels for a broad range of advanced reactor applications. The novel approach demonstrated here of measuring TRISO particle configurations with XCT methods and generating representative fuel compacts for finite element modeling and UQ analysis could be leveraged by the broader particle fuel community in the development of other TRISO fuel experiments in which these variables may have a significant impact on key outcomes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1976

Radiative behavior of a gas layer seeded with soot

Gaseous film or transpiration cooling may be used to reduce the heat flux reaching the wall of a container or other structures. Such a protective film, however, is usually not effective for reducing radiative heat transfer as most gases are transparent in the temperature range for which solid walls can exist. Therefore, heat transfer was examined for a gaseous layer seeded with radiation-absorbing carbon particles (soot) and flowing along a surface. The layer was subjected to an external high temperature source of blackbody radiation. The radiative behavior was found to depend on a parameter containing particle concentration, layer thickness and source temperature. Only a very small particle volume concentration, in the range of .0001, was required to obtain high absorption in a 1-cm-thick layer for typical conditions. The results provide the distance along the surface for which the heat transfer to the wall remains within an acceptable limit and the particles remain below a temperature at which they will melt or vaporize. The wall protection by the layer lasts only until the particles vaporize or the layer becomes so hot that it reradiates substantially to the wall. Depending on the layer mass velocity the protection may be effective for a distance along the wall of only a few layer thickness. Hence, to protect greater wall lengths, it will be necessary to introduce the suspension through multiple slots or holes along the wall.

Siegel, R.↗
NASA NTRS1988

Continuum theories for fluid-particle flows: Some aspects of lift forces and turbulence

A general framework is outlined for the modeling of fluid particle flows. The momentum exchange between the constituents embodies both lift and drag forces, constitutive equations for which can be made explicit with reference to known single particle analysis. Relevant results for lift are reviewed, and invariant representations are posed. The fluid and particle velocities and the particle volume fraction are then decomposed into mean and fluctuating parts to characterize turbulent motions, and the equations of motion are averaged. In addition to the Reynolds stresses, further correlations between concentration and velocity fluctuations appear. These can be identified with turbulent transport processes such as eddy diffusion of the particles. When the drag force is dominant, the classical convection dispersion model for turbulent transport of particles is recovered. When other interaction forces enter, particle segregation effects can arise. This is illustrated qualitatively by consideration of turbulent channel flow with lift effects included.

Mctigue, David F.↗
DOE OSTI2023

The dynamics of suspensions of prolate spheroidal particles—Effects of volume fraction

Here, the effect of volume fraction on the dynamics of a gravity driven suspension of prolate spheroidal solid particles in a fully periodic domain is examined by fully resolved numerical simulations, for relatively modest Reynolds numbers (around 20, depending on the volume fraction). Three systems are examined, for volume fractions of 2.2% (20 particles), 5.5% (50 particles), and 9.9% (90 particles). The results show a transition from flow at low volume fractions dominated by the hydrodynamic interactions between the particles and the fluid, although modified by collisions, to flow dominated by collisions at higher volume fractions. The distribution of the particles with respect to each other, as measured by the probability distribution of nearest distances, is nearly random at low volume fractions but at high volume fractions, there is more clustering than for a random distribution. At lower volume fractions most of the particles fall broadside on whereas at the highest volume fraction, their orientation is essentially random.

42 ENGINEERING↗
NASA NTRS1990

Multiparameter radar and microwave radiative transfer modeling of nonspherical atmospheric ice particles

Multiparameter radar and polarized microwave radiative transfer models for arbitrarily shaped particles are developed. The ice crystals modeled are horizontally oriented hexagonal plates, columns, and needles. The ice water content is fixed at 0.1 g/cu m, and a realistic size distribution is used. The radar modeling is done for S through K-band, and the passive microwave calculations are at 37, 85, and 157 GHz. The modeling results show that particle shape is important for both multiparameter radar and passive microwave radiometry. Radar reflectivity and upwelling microwave brightness temperatures depend strongly on the individual particle volume, which in turn depends on the ice crystal shape. Radar differential reflectivity is high for the plates and lower for needles and columns. Linear depolarization calculations indicate that oblate ice crystals such as plates can be distinguished from prolate crystals such as columns. At 85 and 157 GHz, significant polarization brightness temperature differences are calculated for plates and columns. The particle bulk density strongly affects the radar and radiometer observables. Recent measurements of ice crystals are discussed to show that the model results have practical applicability.

Evans, K. Franklin↗
NASA NTRS2020

A Flexible Parameterization for Shortwave and Longwave Optical Properties of Ice Crystals and Derived Bulk Optical Properties for Climate Models

We provide a parameterization of the extinction efficiency, single scattering albedo and asymmetry parameter of single ice crystals with any combination of particle volume, projected area, component aspect ratio and crystal distortion at any wavelength between 0.2 and 100 mm. The paramerization is an extension of the one previously published by van Diedenhoven et al. (2014, https://doi.org/10.1175/JAS-D-13-0205.1). In addition, the parameterized optical properties are integrated over size distributions yielding bulk extinction efficiencies, single scattering albedos and asymmetry parameters for large ranges of effective radii, particle component aspect ratios and crystal distortion values. The parameterization of single particle optical properties is evaluated with a reference database. The bulk optical properties are evaluated against the ice model selected for the Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6 products, for which accurate optical properties are available. Mean absolute errors in parameterized extinction efficiency, asymmetry parameter and single scattering albedo are shown to be 0.0272, 0.00890 and 0.00468, respectively for shortwave wavelengths, while they are 0.0641, 0.0368 and 0.0200 in the longwave. Shortwave and longwave asymmetry parameter and single scattering albedos are shown to vary strongly with particle component aspect ratio and distortion, resulting in substantial variation in shortwave fluxes, but relatively small variations in longwave cloud emissivity. The parameterization and bulk optical properties are made publicly available.

Bastiaan Van Diedenhoven↗
DOE OSTI2021

Anisotropic colloidal interactions & assembly in AC electric fields

In this work, we match experimental and simulated configurations of anisotropic epoxy colloidal particles in high frequency AC electric fields by identifying analytical potentials for dipole-field and dipole-dipole interactions. We report an inverse Monte Carlo simulation algorithm to determine optimal fits of analytical potentials by matching simulated and experimental distribution functions for non-uniform liquid, liquid crystal, and crystal microstructures in varying amplitude electric fields. Two potentials that include accurate particle volume and dimensions along with a concentration dependent prefactor quantitatively capture experimental observations. At low concentrations, an effective ellipsoidal point dipole potential works well, whereas a novel stretched point dipole potential is found to be suitable at all concentrations, field amplitudes, and degrees of ordering. The simplicity, accuracy, and adjustability of the stretched point dipole potential suggest it can be applied to model field mediated microstructures and assembly of systematically varying anisotropic particle shapes.

42 ENGINEERING↗
DOE OSTI2022

Explosive dispersal of particles in high speed environments

In this paper, we present the results of the explosive dispersal of particles in high-speed environments. We carry out Euler–Lagrange numerical simulations of a source at quiescent ambient conditions as well as moving at Mach numbers of 3 and 6. Particle volume fractions of 0%, 1%, and 4.5% are presented. The detonation profile is computed with the Jones–Wilkins–Lee equation of state using a reactive burn model. Non-static cases provide a framework to consider the effect of a bow shock and pre-existing high-speed flow conditions on the dispersal process. We also compute averages of both static and dynamic pressures, as well as impulse density histories on virtual probe planes to characterize the momentum of the flow and particles that would deposit on a target. Results suggest that the presence of the particles can have a substantial effect on the pressure average of the virtual target planes.

Durant, B. A.↗
DOE OSTI2026

A filter-dependent granular temperature model from large-scale CFD-DEM data

The computational study of strongly-coupled, gas–solid flows at scales relevant to most environmental and engineering applications requires the use of ‘coarse-grained’ methodologies such as the two-fluid model, particle-in-cell approach or the multiphase Reynolds Averaged Navier–Stokes equations. While these strategies enable computations at desirable length- and time-scales, they rely heavily on models to capture important flow physics that occur at scales smaller than the mesh. To date, the models that do exist are based on a limited set of flow conditions, such as very dilute particle phase. To this end, we leverage a large-scale repository of CFD-DEM data to develop filter-size dependent models for the mean variance in particle volume fraction, a quantity commonly used to assess the degree of clustering, and the granular temperature, a key quantity for accurately predicting gas–solid flows. In conclusion, because of its filter-size dependence, the granular temperature model can be directly translated to coarse-grained approaches and tied directly to grid size.

AMReX↗
NASA NTRS2019

Spatial Distribution of Aerosol Microphysical and Optical Properties and Direct Radiative Effect from the China Aerosol Remote Sensing Network

Multi-year observations of aerosol microphysical and optical properties, obtained through ground-based remote sensing at 50 China Aerosol Remote Sensing Network (CARSNET) sites, were used to characterize the aerosol climatology for representative remote, rural, and urban areas over China to assess effects on climate. The annual mean effective radii for total particles (ReffT) decreased from north to south and from rural to urban sites, and high total particle volumes were found at the urban sites. The aerosol optical depth at 440 nm (AOD440 nm) increased from remote and rural sites (0.12) to urban sites (0.79), and the extinction Ångström exponent (EAE440–870 nm) increased from 0.71 at the arid and semi-arid sites to 1.15 at the urban sites, presumably due to anthropogenic emissions. Single-scattering albedo (SSA440 nm) ranged from 0.88 to 0.92, indicating slightly to strongly absorbing aerosols. Absorption AOD440 nm values were 0.01 at the remote sites versus 0.07 at the urban sites. The average direct aerosol radiative effect (DARE) at the bottom of atmosphere increased from the sites in the remote areas (−24.40 W m−2) to the urban areas (−103.28 W m−2), indicating increased cooling at the latter. The DARE for the top of the atmosphere increased from −4.79 W m−2 at the remote sites to −30.05 W m−2 at the urban sites, indicating overall cooling effects for the Earth–atmosphere system. A classification method based on SSA440 nm, fine-mode fraction (FMF), and EAE440–870 nm showed that coarse-mode particles (mainly dust) were dominant at the rural sites near the northwestern deserts, while light-absorbing, fine-mode particles were important at most urban sites. This study will be important for understanding aerosol climate effects and regional environmental pollution, and the results will provide useful information for satellite validation and the improvement of climate modelling.

Huizheng Che↗
NASA NTRS2020

Optimized Profile Retrievals of Aerosol Microphysical Properties from Simulated Spaceborne Multiwavelength Lidar

This work is an expanded study of one previously published onretrievals of aerosol microphysical properties from space-borne multiwavelengthlidarmeasurements. The earlier studiesand this one weredone in the framework of the NASA Aerosol-Clouds-Ecosystems (now the Aerosol Clouds Convection and Precipitation) NASA mission. The focus here is on the capabilities of a simulated spacebornemultiwavelengthlidar system for retrieving aerosol complex refractive index (m = mr+ imi) and spectral single scattering albedo (SSA(λ)), although other bulk parameters such as effective (reff) radius and particle volume (V) and surface (S) concentrations are also studied. The novelty presented here is the use of recently published, case dependent optimized-constraints on the microphysical retrievals using three backscattering coefficients (β) at 355, 532 and 1064 nm and two extinction coefficients (α) at 355 and 532 nm, typically known as the stand-alone 3β+2α lidar inversion. Case-dependent optimized-constraints (CDOC) limit the ranges of refractive index, both real (mr) and imaginary (mi) parts, and of radii that are permitted in the retrievals. Such constraints are selected directly from the 3β+2α41measurements through an analysis of the relationship between spectral dependence of aerosol extinction-to-backscatter ratios (LR) and the Ångström exponent of extinction. The analyses presented here for different sets ofsize distributions and refractive indices reveal that the direct determination of CDOCareonly feasible for cases where the uncertaintiesin the input optical data areless than 15 %.Forthe same simulated spacebornesystem and yield than in Whiteman et al., (2018), we demonstrated that the use of CDOC as essential for the retrievals of refractive index and also largely improved retrieval of bulk parameters. A discussion of the global representativeness of CDOC is presented using simulated lidar data from a 24-hour satellite track using GEOS model output to initialize the lidar simulator.We found that CDOCare representative of many aerosol mixtures in spite of some outliers (e.g. highly hydrated particles) associatedwith the assumptions of bimodal size distributions and of the same refractive index for fine and coarse modes. Moreover, sensitivity tests performed using synthetic data reveal that retrievals of imaginary refractive index (mi) and SSA are extremely sensitive to β(355).

NASA Aerosol-Clouds-Ecosystems↗
DOE OSTI2020

Coupling reduced‐order modeling and coarse‐grained CFD‐DEM to accelerate coal gasifier simulation and optimization

Abstract High fidelity three‐dimensional (3‐D) numerical simulations of commercial‐scale coal gasifiers are very time consuming and expensive. This article proposes a reduced‐order modeling approach that uses quasi one‐dimensional (1‐D) CFD–DEM simulation results to serve as an accurate initial condition for the 3‐D simulation, which significantly shortens the physical time from several hours to minutes to achieve steady states. The 3‐D simulation employs a previously validated coarse‐grained CFD‐DEM approach, which further accelerates the simulation. Both 1‐D and 3‐D simulations adopt a particle shrinkage scheme to correctly account for the particle volume change due to chemical reaction and thus provides an accurate bed height. Comparison with available experimental measurements of the bed temperature and synthesis gas composition is used to validate the simulation. The final syngas composition and flowrates are strongly affected by the fuel or gasification agent rate and process operating conditions as expected. This approach is then used to optimize two important operating conditions (air and steam flows) to achieve specific gasifier performance goals for the production of Fischer–Tropsch synthesis gas and production of fuel gas for gas turbines.

Yu, Jia↗
DOE OSTI2023

Constructing stable interface layer for boosting high-voltage cycling performance of single-crystal Ni-rich cathodes

Increasing demand for electric vehicles (EVs) worldwide and the requirements for environmental protection have greatly promoted the development of low-Co, Ni-rich layered cathodes due to their high energy density, reasonable cost, and less environmental pollution. Nevertheless, serious performance degradation and safety concerns resulting from structural/interfacial instability under high operating voltages (≥4.3 V) have greatly hindered its commercialization. Herein, we propose a feasible surface modification strategy by introducing a multifunctional Li 2 SiO 3 (LSO) coating layer onto the surface of Co less single-crystalline LiNi 0.63 Co 0.07 Mn 0.3 O 2 (NCM) to solve the above challenges. Additionally, the uniform Li 2 SiO 3 coating layer has a unique three-dimensional (3D) ion diffusion channel, which greatly promotes the transmission of Li + and alleviates interfacial stress accumulation. Equally important, the electrochemically inert Li 2 SiO 3 coating layer has a stable structure framework with strong Si-O bonds, which inhibit anisotropic particle volume expansion and the occurrence of side reactions during long-term cycling. As a consequence, LSO modified NCM exhibits greatly improved electrochemical properties even at harsh testing conditions and achieves capacity retention of 79.1% after 200 cycles at 25°C within 2.95-4.5 V in half cells. Furthermore, it provides an outstanding capacity retention of 94.7% after 300 cycles at 25°C within 2.95-4.4 V when tested in pouch full cells.

25 ENERGY STORAGE↗
DOE OSTI2023

A simple, validated approach for design of two-dimensional periodic particle patterns via acoustophoresis

Two-dimensional patterning of microparticles enables a wide range of functional materials, including patterned energy storage electrodes, flexible electronics, and sensor arrays. Particle patterning via acoustics offers an attractive path to generate a wide variety of 2D periodic patterns that introduce tailorable hierarchical porosity, useful for controlling surface area, transport distances, and other properties. This method is most effective with micron scale particles and patterns of tens to hundreds of microns. To enable systematic exploration of the broad design space for such patterns, this work develops a model of 2D and 3D assembly of particles at high loadings and validates the obtained patterns against both experiments and more computationally intensive modeling techniques. Using this simple model, connections are mapped between input parameters (like actuation conditions, particle volume fraction, material properties) and output geometrical features (like void size and shape, pattern connectivity, and surface area) so that they can be tailored to given applications. The utility of this simple model is illustrated by predicting and then experimentally demonstrating new hierarchical patterns resulting from multiple waves of different frequencies interacting. These multiscale patterns offer the potential to lift the limits on surface area, diffusion distances, and other features.

42 ENGINEERING↗
DOE OSTI2023

Strengthening model development and effects of low diffusing solutes to coarsening resistance in aluminum alloys

A modified Orowan strengthening model is proposed to account for finite rod-shaped precipitates with hemispherical caps in aluminum alloy systems. A combined computational and experimental approach is used to study the influences of anisotropic Orowan looping and solute-dislocation interaction on temperature-dependent yield strength. Here, the strengthening model is validated with a dataset containing 297 experimental precipitate geometries, chemistries, temperatures, and strength measurements, and achieves a strong predictive correlation of 0.8713 with experimentally measured yield strengths. Under conditions that are applicable to coarsening, constant particle volume fraction and aspect ratio, the model predicts that short rod precipitates provide far superior strengthening effects compared to plate precipitates. A cast Al-Si-Mg-Cu alloy with rod-shaped Q-phase (Al 3 Cu 2 Mg 9 Si 7 ) precipitates was developed with a novel chemistry exploring the use of low-diffusivity elements (Mn, Ni, V, Zr) to limit precipitate coarsening. The thermodynamic behavior of Mn, Ni, V, and Zr across the Q-phase interface is examined using transmission electron microscopy (TEM), first-principles density-functional theory (DFT) calculations. and atom-probe tomography (APT). DFT calculations utilizing TEM identified Q-phase/Al-matrix interfaces show that Mn, Ni, V, and Zr preferentially segregate to the Q-phase precipitate boundaries which suggests inhibition of precipitate coarsening and higher strengths after temperature exposure. Atom-probe tomography confirms solute atom partitioning/segregation at the Q-phase/Al-matrix interface, found in the modified commercial AS7GU alloy (A356 +0.5%Cu), which supports these observations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Machine-Learned Force Field for Molecular Dynamics Simulations of Nonequilibrium Ammonia Synthesis on Iron Catalysts

Ammonia (NH 3 ) is one of the most important industrial chemicals. The conventional NH 3 synthesis method-the Haber–Bosch process-converts atmospheric nitrogen (N 2 ) into NH 3 using H 2 with an iron (Fe) catalyst. However, this process requires high pressures (100–200 atm) and temperatures (700–800 K) near thermal equilibrium. Recently, Fe-based nanocatalysts have been reported to produce promising NH 3 yields under atmospheric pressures and temperature-modulated nonequilibrium conditions. Understanding the mechanism of nonequilibrium catalysis with programmed temperature variation could help to optimize this fully electrified and less energy-intensive process. Although reactive molecular dynamics (RMD) simulations can be a useful tool to model nonequilibrium catalytic processes, they require the development of accurate force fields (i.e., interatomic potentials). Here, we present a machine-learned (ML) force field within the Deep Potential MD (DPMD) framework, trained using periodic density functional theory (DFT) calculations, to model NH 3 synthesis on Fe catalysts with various surface adsorbates such as *N, *H, *N 2 , *H 2 , *NH, *NH 2 , and *NH 3 . Here, we generated the DFT data from static models of elementary reactions on the most stable (110) surface of body-centered cubic Fe, which then were augmented by data from constant number of particles–volume–temperature (NVT) DFT-MD trajectories at various temperatures. Finally, we utilized the fully optimized ML force field to investigate reaction dynamics at an Fe(110) surface at linearly increasing temperatures using NVT-DPMD simulations. Our simulations indicate that pulsed temperature ramping could prove favorable for NH3 synthesis. For example, we conducted ramping under multiple sets of conditions: (i) from 900 to 1200 K over periods of 0.1–0.3 ns for Fe surfaces precovered with N or NH along with H; and (ii) from 300 to 600 K over 0.1–0.3 ns for Fe surfaces precovered with NH 3 . While our simulations so far are limited to short time scales (very rapid heating), these observations shed light on the mechanism of the high NH 3 synthesis rate achieved in a novel temperature-modulated nonequilibrium catalytic reactor using pulsed heating and cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Continuous Encodable Reshaping of Gold Nanocrystals through Facet Modulation

Shape control of nanocrystals (NCs) is crucial for tuning their assembly behavior and functional properties, yet the precise manipulation of facet composition remains challenging. Here, we present a nanocrystal reshaping strategy to control and modulate the facets of gold (Au) NCs. Our one-pot approach, conducted at room temperature, requires only initial Au NCs, Au 3+ ions, and surfactants, distinguishing it from conventional reduction-mediated “etching-and-regrowth” methods. Detailed structural studies using electron microscopy, small-angle X-ray scattering (SAXS), and UV−vis spectroscopy reveal the surfactant-encoded pathway for NC transformation from shaped particles to spheres and then into various polyhedral shapes while preserving the individual particles' volume. The proposed reshaping mechanism involves the dissolution of surface Au atoms into Au + complexes in the presence of Au 3+ and surfactant, followed by surfactant-guided redeposition and formation of facets with different atomic planes. Using the ethanol oxidation reaction (EOR) as a probe, we observe a quasi-linear decrease in onset potential and an increase in activity with increasing {100} facet exposure. This work broadens synthetic strategies by offering precise NC reshaping and facet control.

36 MATERIALS SCIENCE↗