Search NASA⌕ Search

SEARCH · Search NASA

Results for “Photocatalytic activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Aerosol-Assisted Deposition for TiO 2 Immobilization on Photocatalytic Fibrous Filters for VOC Degradation

Atomization and spraying are well-established methods for the production of submicrometer- and micrometer- sized powders. In addition, they could be of interest to the immobilization of photocatalytic nanoparticles onto supports because they enable the formation of microporous films with photocatalytic activity. Here, we provide a comparison of aerosol-assisted immobilization methods, such as spray-drying (SD), spray atomization (SA), and spray gun (SG), which were used for the deposition of TiO 2 dispersions onto fibrous filter media. The morphology, microstructure, and electronic properties of the structures with deposited TiO 2 were characterized by SEM and TEM, BET and USAXS, and UV-Vis spectrometry, respectively. The photocatalytic performances of the functionalized filters were evaluated and compared to the benchmark dip-coating method. Our results showed that the SG and SA immobilization methods led to the best photocatalytic and operational performance for the degradation of toluene, whereas the SD method showed the lowest degradation efficiency and poor stability of coating. We demonstrated that TiO2 sprays using the SG and SA methods with direct deposition onto filter media involving dispersed colloidal droplets revealed to be promising alternatives to the dip-coating method owing to the ability to uniformly cover the filter fibers. In addition, the SA method allowed for fast and simple control of the coating thickness as the dispersed particles were continuously directed onto the filter media without the need for repetitive coatings, which is common for the SG and dip-coating methods. Our study highlighted the importance of the proper immobilization method for the efficient photocatalytic degradation of VOCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rapid Screening of Single-Atom Catalyst Synthesis Conditions Using ToF-SIMS and Facet-Dependent Single-Crystal Substrates

Single-atom catalysts (SACs) offer superior catalytic performance compared to traditional nanoparticle catalysts but are challenging to develop because of the need for extensive optimization and specialized characterization techniques. Here, this study presents a rapid and versatile method for detecting synthesis conditions and elucidating deposition mechanisms of SACs on various substrates. By depositing active elements (Au, Cu, Ni and Rh) on facet-specific single-crystalline substrates (CeO 2 , TiO 2 , MgO and Al 2 O 3 ) and employing time-of-flight secondary ion mass spectroscopy (ToF-SIMS), we assessed facet-dependent deposition behaviors and identified optimal conditions for solution-based SAC synthesis. On CeO 2 and TiO 2 , we confirmed facet-dependent deposition, primarily influenced by oxygen vacancy density and photocatalytic activity, respectively. MgO exhibited the formation of metal oxide/hydroxide clusters for all active elements, and the degree of clustering for Cu and Ni was correlated with the facet hydrolysis susceptibility. Notably, Au and Rh deposition on MgO was facet-independent, attributed to the formation of hydroxide species in solution. Al 2 O 3 , due to its chemical stability and lack of surface defects, did not show active element deposition. This study not only provides a time and cost-efficient method for prescreening SAC synthesis conditions, but it also provides valuable insights into the various deposition mechanisms governing SAC formation on different substrates, paving the way for the rational design of tailored SACs for various catalytic applications.

ToF-SIMS↗
DOE OSTI2024

Vapor Phase Infiltration of Titanium Oxide into P3HT to Create Organic–Inorganic Hybrid Photocatalysts

Herein, we report for the first time the use of vapor phase infiltration (VPI) to infuse conducting polymers with inorganic metal oxide clusters that together form a photocatalytic material. While vapor infiltration has previously been used to electrically dope conjugated polymers, this is the first time, to our knowledge, that the resultant hybrid material has been demonstrated to have photocatalytic properties. The system studied is poly(3-hexylthiophene-2,5-diyl) (P3HT) vapor infiltrated with TiCl 4 and H 2 O to create P3HT-TiO x organic–inorganic hybrid photocatalytic materials. X-ray photoelectron spectroscopy analysis shows that P3HT-TiO x VPI films consist of a partially oxidized P3HT matrix, and the infiltrated titanium inorganic is in a 4+ oxidation state with mostly oxide coordination. Upon visible light illumination, these P3HT-TiO x hybrids degrade methylene blue dye molecules. The P3HT-TiO x hybrids are 4.6× more photocatalytically active than either the P3HT or TiO 2 individually or when sequentially deposited (e.g., P3HT on TiO 2 ). On a per surface area basis, these hybrid photocatalysts are comparable or better than other best in class polymer semiconductor photocatalysts. VPI of TiCl 4 + H 2 O into P3HT makes a unique hybrid structure and idealized photocatalyst architecture by creating nanoscale TiO x clusters concentrated toward the surface achieving extremely high catalytic rates. The mechanism for this enhanced photocatalytic rate is understood using photoluminescence spectroscopy, which shows significant quenching of excitons in P3HT-TiO x as compared to neat P3HT, indicating that P3HT acts as a photosensitizer for the TiO x catalyst sites in the hybrid material. This work introduces a new approach to designing and synthesizing organic–inorganic hybrid photocatalytic materials, with expansive opportunities for further exploration and optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Highly Active Rutile TiO 2 Nanocrystalline Photocatalysts

The controllable synthesis of rutile TiO 2 single crystal particles with the preferential orientation of {111} facets still remains a scientific and technological challenge. Here, we developed a facile route for fabrication of rutile TiO 2 nanorod crystals (RTiO 2 NRs) having high ratios of oxidative {111} to reductive {110} surfaces. RTiO 2 NRs were synthesized using a peroxo-titanium complex (PTC) approach, which was controlled by changing the Ti/H 2 O 2 ratio. The thus obtained RTiO 2 NRs revealed a high tendency to agglomerate through orientation-dependent attachment along the {110} facets. This resulted in an increased {111}/{110} surface ratio and led to a markedly improved photocatalytic activity of RTiO 2 NR aggregates. The reported findings illustrate the rich potential of the herein proposed facile and energy-efficient synthesis of nanostructured rutile TiO 2 -based photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

2D Covalent Organic Frameworks with an Incorporated Manganese Complex for Light Driven Carbon Dioxide Reduction

Covalent organic frameworks (COFs) have emerged as a novel class of crystalline porous photocatalytic materials due to their unique properties such as large surface area, tunable porosity, and rigid structure. Here in this work, we report the direct incorporation of a manganese CO 2 molecular catalyst (MC) into COFs (Mn-TTA-COF) and the evaluation of its capability as photocatalyst for visible light driven CO 2 reduction to form CO. We found that the photocatalytic activity of Mn-TTA-COF is quite low, which mainly results from the elimination of the CO ligand in the Mn MC upon light illumination, rendering its short duration in the catalytic reaction. While this is a central concern for the further use Mn-TTA-COF as a CO 2 reduction catalyst, here we found that the stability and efficiency of Mn MC is largely enhanced after being incorporated into COFs with respect to its homogeneous version, suggesting the capability of COFs as heterogeneous platform to incorporate MC and improve the catalytic performance of MC. Moreover, transient absorption spectroscopic studies show that the intramolecular charge transfer lifetime of the Mn-incorporated COF is longer than that in the parent COF, which suggests that charge separation (CS) may occur from the parent COF to the Mn moiety. These results together suggest that COFs may show promise as a platform for creating next-generation photocatalysts with a built-in photosensitizer and MC, which can facilitate CS and enhance the stability and efficiency of the incorporated MC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydrazone-Linked Heptazine Polymeric Carbon Nitrides for Synergistic Visible-Light-Driven Catalysis

Heptazine-based conjugated polymeric carbon nitrides (PCNs) are promising metal-free photocatalysts, yet their synthesis is challenging due to the electron-deficiency and insolubility of heptazine units. Indeed, heptazine-containing polymers have only been prepared through nucleophilic substitution with amines by using toxic cyameluric chloride as the starting material. Herein, we report the novel and environmentally friendly method for preparing heptazine-based mesoporous PCNs with hydrazone links formed through a simple Schiff base condensation of melem-NH 2 and aldehydes. Unlike cyameluric chloride, melem-NH 2 is non-toxic, stable, and can be readily obtained from melem and hydrazine in solution. We demonstrate that the hydrazone linkages and the heptazine units synergistically enhance the photocatalytic activity of PCNs in visible-light-driven aerobic oxidation of benzyl alcohol to benzaldehyde. In particular, the polymer constructed from melem-NH2 and p-phthalaldehyde shows 17 times more activity than graphitic carbon nitride (g-C 3 N 4 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ultrafast Carrier and Lattice Dynamics in Plasmonic Nanocrystalline Copper Sulfide Films

Excited carrier dynamics in plasmonic nanostructures determines many important optical properties such as nonlinear optical response and photocatalytic activity. Here it is shown that mesoscopic plasmonic covellite nanocrystals with low free-carrier concentration exhibit a much faster carrier relaxation than in traditional plasmonic materials. A nonequilibrium hot-carrier population thermalizes within first 20 fs after photoexcitation. A decreased thermalization time in nanocrystals compared to a bulk covellite is consistent with the reduced Coulomb screening in ultrathin films. The subsequent relaxation of thermalized, equilibrium electron gas is faster than in traditional plasmonic metals due to the lower carrier concentration and agrees well with that in a bulk covellite showing no evidence of quantum confinement or hot-hole trapping at the surface states. The excitation of coherent optical phonon modes in a covellite is also demonstrated, revealing coherent lattice dynamics in plasmonic materials, which until now was mainly limited to dielectrics, semiconductors, and semimetals. These findings show advantages of this new mesoscopic plasmonic material for active control of optical processes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Antimicrobial mechanisms of g‐C 3 N 4 @ ZnO against oomycetes Phytophthora capsici: from its metabolism, membrane structures and growth

Abstract BACKGROUND Phytophthora capsici , a refractory and model oomycete plant pathogen, especially threatens multiple vegetable crops. A limited number of chemical pesticides play a vital role in controlling oomycete plant diseases. However, this approach often leads to excessive use of chemical agent, exacerbates environmental issues and more and more drug‐resistant strains of oomycete. Therefore, it is imperative to devise innovative solutions that can effectively address the infection of oomycete while maintaining high levels of environmental sustainability and low toxicity. RESULTS In this study, g‐C 3 N 4 @ZnO heterostructure was synthesized and characterized. The g‐C 3 N 4 @ZnO showed higher toxicity on Phytophthora capsici than graphitic carbon nitride (g‐C 3 N 4 ) nanosheets and zinc oxide (ZnO) nanoparticles in vitro and in vivo . Except the hyphal growth of Phytophthora capsici , their germination rate of spores, sporangium formation and number of spores were all suppressed by g‐C 3 N 4 @ZnO heterostructure. Furthermore, we found that this g‐C 3 N 4 @ZnO heterostructure has higher photocatalytic activity under visible light, which potentially enhanced the reactive oxygen species (ROS) mediated stress on Phytophthora capsici . Ultrastructural morphology, global changes of gene expression and weighted gene co‐expression network analysis all supported that the anti‐oomycete activity of g‐C 3 N 4 @ZnO was manifested in the destruction of membrane system and inhibition of multiple metabolisms of Phytophthora capsici under visible irradiation, which also could be attributed to the ROS and zinc ion (Zn 2+ ) mediated stress. CONCLUSION This works offers a novel oomycete disease management strategy by using g‐C 3 N 4 @ZnO, which were attributed to the ROS stress, destruction of membrane system and inhibition of multiple metabolisms. © 2023 Society of Chemical Industry.

Cai, Lin↗
DOE OSTI2025

Electronic Structure Tuning of Lanthanidocene Photocatalysts for C–F Bond Cleavage

A set of nine new robust, tunable cerium complexes supported by an ansa-bis(cyclopentadienyl) ligand, [Me 2 Si(η 5 -Cp R ) 2 ]CeX ( an Cp R )CeX, are excellent homogeneous visible-light photocatalysts for the monodefluoroalkylation of trifluorotoluene with Mg(CH 2 C 6 H 5 ) 2 THF 2 (R = Me 4 , SiMe 3 , X = N(SiMe 3 ) 2 (N″), X = CH(SiMe 3 ) 2 (R''), Cl, OC 6 H 2 t Bu 2 -2,6,Me-4 (OAr)). The trends in photocatalytic activity within the series are explained by photophysical spectroscopic analyses. The aryloxide complex [Me 2 Si(Cp SiMe3 ) 2 ]CeOAr, which has the highest activity (95% substrate conversion in 27 h), shows the most negative (most reducing) excited-state reduction potential (-2.71 V vs Fc). The precatalyst excited-state lifetimes are also exceptionally long. Detailed photoluminescence, NMR spectroscopic, and kinetic studies on chloride [Me 2 Si(Cp Me4 ) 2 ]CeCl suggest that the "ate" complex [{Me 2 Si(Cp Me4 ) 2 } 2 Ce III ClBn][MgBn] is the active catalyst in the alkylation reaction to form PhCF 2 CH 2 Ph with high selectivity over PhCF 2 H. Finally, the reaction rates are up to 30 times higher than previously reported for organometallic rare-earth photocatalysts for these Ce complexes and comparable to established Ir-based photoredox systems.

catalysts↗
DOE OSTI2024

How Beneficial Is Pretraining on a Narrow Domain-Specific Corpus for Information Extraction about Photocatalytic Water Splitting?

Language models trained on domain-specific corpora have been employed to increase the performance in specialized tasks. However, little previous work has been reported on how specific a “domain-specific” corpus should be. Here, we test a number of language models trained on varyingly specific corpora by employing them in the task of extracting information from photocatalytic water splitting. We find that more specific corpora can benefit performance on downstream tasks. Furthermore, PhotocatalysisBERT, a pretrained model from scratch on scientific papers on photocatalytic water splitting, demonstrates improved performance over previous work in associating the correct photocatalyst with the correct photocatalytic activity during information extraction, achieving a precision of 60.8(+11.5)% and a recall of 37.2(+4.5)%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Photogenerated Charge Separation in a CdSe Nanocluster Encapsulated in a Metal–Organic Framework for Improved Photocatalysis

Nanoclusters encapsulated in a metal–organic framework (MOF) are the subject of intense interest because of their high promise for photocatalysis. We show computationally that a CdSe nanocluster incorporated into NU-1000 (Cd 6 Se 6 @NU-1000) allows electron transfer from a visible-light photo-excited organic linker to the lowest unoccupied crystal orbital of the inorganic cluster, which can lead to charge separation. Substituents on the linker can be used to tune the band position and the band gap of the whole composite (Cd 6 Se 6 @NU-1000), and this makes it possible to perform the water splitting reaction under visible light. Here, the achievement of charge separation within the MOF leads to longer life of the excited states, and as a result, it can enhance the photocatalytic activity of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ultrastable Gold Nanostars via Bottlebrush-like Block Copolymers

Gold (Au) nanostars are plasmonic nanostructures possessing potentials for small molecule detection, photocatalytic activities, and photothermal therapy. However, Au nanostars synthesized in the traditional way are often plagued by poor photo, thermal, and chemical stabilities. Here, we report an unconventional route to the synthesis of ultrastable colloidal Au nanostars enabled by bottlebrush-like block copolymers (BBCPs), dispensing with the need for Au seeds. Crafting of Au nanostars using BBCPs is rendered by bridging the latter with Au 3+ ions as cross-linkers that have multiple coordination sites. Notably, the presence of a covalently tethered polymer shell on the surface of Au nanostars (i.e., polymer-ligated Au nanostars) imparts remarkably high stability under high temperature and laser excitation over conventional cetyltrimethylammonium bromide (CTAB)-mediated Au nanostars. Due to enhanced laser stability, plasmonic fields near Au nanostars can be visualized under high laser fluence by ultrafast electron microscopy (UEM) without morphological degradation. Notably, the presence of insulating polystyrene chains does not compromise the plasmonic field distribution, with the highest field intensity observed along the star arms. In conclusion, the greatly improved long-term photo, thermal, and chemical stabilities make Au nanostars a prospective noble metal nanomaterial for a range of sensing applications.

Cellulose↗
DOE OSTI2021

Exploring the Structure and Performance of Cd–Chalcogenide Photocatalysts in Selective Trifluoromethylation

The field of heterogeneous photoredox catalysis has grown substantially and impacted organic synthesis because of the affordability and reusability of catalysts. This study reports radical trifluoromethylation with Cd–chalcogenide semiconductors. Cd semiconductors, particularly CdSe, are readily available, commercial, visible-light-responsive, heterogeneous photocatalysts. The potential of readily available Cd semiconductors, particularly CdSe, is confirmed by their increased photocatalytic activity toward trifluoromethylation with various substrates, such as (hetero)arenes and vinylic amides/acids, via addition, cyclization, and decarboxylation under visible light. Additionally, the economic significance of this strategy is also highlighted through the scalable synthesis of biologically active molecules followed by catalyst reuse. Moreover, these catalysts are relatively inexpensive compared with transition metal-based homogeneous photocatalysts, presently used in organic synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Insights into the Reactivity of Brookite TiO 2 Nanorods in Liquid Water from Ab Initio Molecular Dynamics Simulations

Brookite TiO 2 , a rare natural polymorph of TiO 2 , has been reported to be an excellent photocatalyst for the production of hydrogen from water and aqueous alcohol solutions, especially when it is reduced and synthesized in the form of nanorods. Here, we investigate the reactivity of stoichiometric and reduced brookite nanorods in liquid water using ab initio molecular dynamics and hybrid density functional theory calculations. Our simulations show a much higher water dissociation fraction on reduced nanorods than on stoichiometric ones, with an accumulation of the resulting bridging hydroxyls (O br H) and terminal hydroxyls (Ti –OH) on different facets of the nanorod. ObrH groups accumulate preferentially on low-energy (210) facets, where they are stabilized by adjacent reduced Ti (Ti 3+ ) sites, while Ti –OH groups prefer to form at the four-fold coordinated Ti atoms on high-energy (010) facets. This hydroxylation pattern also favors the spatial localization of excited holes on the (010) facets. This coupling between water-induced surface chemistry and charge separation underpins the enhanced photocatalytic activity of brookite nanorods, providing useful information for the design of more efficient TiO2-based nanostructures for solar-driven hydrogen evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Photocatalytic Semiconductor–Metal Hybrid Nanoparticles: Single-Atom Catalyst Regime Surpasses Metal Tips

Semiconductor–metal hybrid nanoparticles (HNPs) are promising materials for photocatalytic applications, such as water splitting for green hydrogen generation. While most studies have focused on Cd containing HNPs, the realization of actual applications will require environmentally compatible systems. Using heavy-metal free ZnSe-Au HNPs as a model, we investigate the dependence of their functionality and efficiency on the cocatalyst metal domain characteristics ranging from the single-atom catalyst (SAC) regime to metal-tipped systems. The SAC regime was achieved via the deposition of individual atomic cocatalysts on the semiconductor nanocrystals in solution. Utilizing a combination of electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy, we established the presence of single Au atoms on the ZnSe nanorod surface. Upon increased Au concentration, this transitions to metal tip growth. Photocatalytic hydrogen generation measurements reveal a strong dependence on the cocatalyst loading with a sharp response maximum in the SAC regime. Ultrafast dynamics studies show similar electron decay kinetics for the pristine ZnSe nanorods and the ZnSe-Au HNPs in either SAC or tipped systems. This indicates that electron transfer is not the rate-limiting step for the photocatalytic process. Combined with the structural-chemical characterization, we conclude that the enhanced photocatalytic activity is due to the higher reactivity of the single-atom sites. This holistic view establishes the significance of SAC-HNPs, setting the stage for designing efficient and sustainable heavy-metal-free photocatalyst nanoparticles for numerous applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photocatalytic Aqueous CO 2 Reduction to CO and CH 4 Sensitized by Ullazine Supramolecular Polymers

There has been rapid progress on the chemistry of supramolecular scaffolds that harness sunlight for aqueous photocatalytic production of hydrogen. However, great efforts are still needed to develop similar photosynthetic systems for the great challenge of CO 2 reduction especially if they avoid the use of nonabundant metals. This work investigates the synthesis of supramolecular polymers capable of sensitizing catalysts that require more negative potentials than proton reduction. The monomers are chromophore amphiphiles based on a diareno-fused ullazine core that undergo supramolecular polymerization in water to create entangled nanoscale fibers. Under 450 nm visible light these fibers sensitize a dinuclear cobalt catalyst for CO 2 photoreduction to generate carbon monoxide and methane using a sacrificial electron donor. The supramolecular photocatalytic system can generate amounts of CH 4 comparable to those obtained with a precious metal-based [Ru(phen) 3 ](PF 6 ) 2 sensitizer and, in contrast to Ru-based catalysts, retains photocatalytic activity in all aqueous media over 6 days. Furthermore, the present study demonstrates the potential of tailored supramolecular polymers as renewable energy and sustainability materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultra-fast Proton Conduction and Photocatalytic Water Splitting in a Pillared Metal–Organic Framework

Proton-exchange membrane fuel cells enable the portable utilization of hydrogen (H 2 ) as an energy resource. Current electrolytic materials have limitation, and there is an urgent need to develop new materials showing especially high proton conductivity. Here, we report the ultra-fast proton conduction in a novel metal–organic framework, MFM-808, which adopts an unprecedented topology and a unique structure consisting of two-dimensional layers of {Zr 6 }-clusters. By replacing the bridging formate with sulfate ligands within {Zr 6 }-layers, the modified MFM-808-SO 4 exhibits an exceptional proton conductivity of 0.21 S·cm –1 at 85 °C and 99% relative humidity. Modeling by molecular dynamics confirms that proton transfer is promoted by an efficient two-dimensional conducting network assembled by sulfate–{Zr 6 }-layers. MFM-808-SO 4 also possesses excellent photocatalytic activity for water splitting to produce H 2 , paving a new pathway to achieve a renewable hydrogen-energy cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗