Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plasma codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Foundations of plasma standards

Abstract The field of low-temperature plasmas (LTPs) excels by virtue of its broad intellectual diversity, interdisciplinarity and range of applications. This great diversity also challenges researchers in communicating the outcomes of their investigations, as common practices and expectations for reporting vary widely in the many disciplines that either fall under the LTP umbrella or interact closely with LTP topics. These challenges encompass comparing measurements made in different laboratories, exchanging and sharing computer models, enabling reproducibility in experiments and computations using traceable and transparent methods and data, establishing metrics for reliability, and in translating fundamental findings to practice. In this paper, we address these challenges from the perspective of LTP standards for measurements, diagnostics, computations, reporting and plasma sources. This discussion on standards, or recommended best practices, and in some cases suggestions for standards or best practices, has the goal of improving communication, reproducibility and transparency within the LTP field and fields allied with LTPs. This discussion also acknowledges that standards and best practices, either recommended or at some point enforced, are ultimately a matter of judgment. These standards and recommended practices should not limit innovation nor prevent research breakthroughs from having real-time impact. Ultimately, the goal of our research community is to advance the entire LTP field and the many applications it touches through a shared set of expectations.

data and reaction mechanisms↗
DOE OSTI2024

Center for Tokamak Transient Simulations (RPI Unstructured Mesh Developments for FES SciDAC4 Partnerships) (Final Report)

The goal of this project was the development of unstructured mesh technologies for fusion simulation codes” for FES SciDAC partnerships and to integrate those technologies into the simulation workflows of those partnerships. Specific developments were executed in support of the following FES SciDAC4 partnerships: Partnership Center for High‐fidelity Boundary Plasma Simulation (HBPS), Center for Integrated Simulation of Fusion Relevant RF (RF‐SciDAC), Center for Plasma Surface Interactions: Predicting the Performance and Impact of Dynamic PFC Surfaces (PSI2), and Center for Tokamak Transient Simulations (CTTS). The key unstructured mesh development areas addressed in this project include (i) methods to most effectively perform PIC calculations on unstructured meshes; (ii) creating meshes for fusion systems accounting for any desired level of geometric complexity and providing physics aware mesh configurations, (iii) adapting unstructured meshes to control the discretization errors, (iv) executing unstructured mesh calculations on GPU accelerated systems, (v) supporting physics/application‐specific PIC operations including surface/wall interactions of particles, (vi) providing infrastructure tools to support the interactions of solvers with unstructured meshes, and (vii) providing advanced methods for coupling plasma physics codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

An implicit particle code with exact energy and charge conservation for electromagnetic studies of dense plasmas

A collisional particle code based on implicit energy- and charge-conserving methods is presented. A modified version of the particle-suppressed Jacobian-Free Newton-Krylov method that can enhance the solver efficiency is introduced. Mathematically, it is shown that this new approach can be viewed as a fixed-point iteration method for the particle positions. The model can exactly conserve global energy and local charge and can efficiently use time steps larger than the plasma period. In conclusion, the algorithm's ability to simulate dense plasmas accurately and efficiently is quantified by simulating the dynamic compression of a plasma slab via a magnetic piston in 1D planar geometry.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Experimental validation of an integrated modelling approach to neutron emission studies at JET

An integrated modelling methodology for the calculation of realistic plasma neutron sources for the JET tokamak has been developed. The computational chain comprises TRANSP plasma transport and DRESS neutron spectrum calculations, and their coupling to the MCNP neutron transport code, bridging plasma physics and neutronics. Here, we apply the developed methodology to the analysis of neutron emission properties of deuterium and helium plasmas at JET, and validate individual modelling steps against neutron diagnostic measurements. Two types of JET discharges are modelled—baseline-like and three-ion radio-frequency scenarios—due to their diversity in plasma heating, characteristics of the induced fast ion population, and the imprint of these on neutron emission properties. The neutron emission modelling results are quantitatively compared to the total neutron yield from fission chambers, neutron emissivity profiles from the neutron camera, neutron spectra from the time-of-flight spectrometer, and neutron activation measurements. The agreement between measured and calculated quantities is found to be satisfactory for all four diagnostic systems within the estimated experimental and computational uncertainties. Additionally, the effect of neutrons not originating from the dominating D(D, n) 3 He reactions is studied through modelling of triton burnup DT neutrons, and, in mixed D- 3 He plasmas, neutrons produced in the 9 Be(D, nγ) 10 B reaction on impurities. It is found that these reactions can contribute up to several percent to the total neutron yield and dominate the neutron activation of samples. Finally, the effect of MeV-range fast ions on the neutron activation of 115 In and 27 Al samples is measured and computationally validated.

integrated modelling↗
DOE OSTI2023

Faraday effect in collisional magnetized plasmas

Faraday rotation is a valuable diagnostic tool for investigating laboratory and astrophysical plasmas, but it has almost exclusively been treated in the collisionless limit (despite the non-negligible role of Coulomb collisions in many laboratory plasmas). Here, we show that Faraday rotation can occur in collisional plasmas and that the usual effect is curiously altered by collisions. Namely, an initially linearly polarized light wave—propagating parallel to a uniform magnetic field—becomes elliptically polarized in the collisional plasma, and collisional absorption of the wave also occurs. Moreover, the ellipticity and rotation angle are quantifiably sensitive to the fidelity of the collisional transport coefficients. As we will demonstrate with particle-in-cell EPOCH simulations, these effects offer a stringent diagnostic tool for benchmarking multi-scale plasma simulation codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Kinetic modeling of hot tail runaway electron generation during plasma disruptions using the JOREK code

The generation of runaway electrons (REs) during disruptions poses a significant challenge for the operation of tokamaks. The production of these high-energy electrons can cause substantial damage, particularly when the plasma current is high, making it a critical concern for ITER. For the high-temperature plasmas anticipated in ITER, the primary generation of REs may be dominated by the hot tail mechanism, which consists of the acceleration of hot electrons from the pre-disruption population which have not yet thermalized with the bulk following the rapid cooling of the plasma. To account for the significant 3D effects on RE production, a hot tail modeling framework has been developed within the non-linear 3D extended MHD code JOREK. This paper presents the structure of this framework, which is based on test electrons evolving in MHD fields. The verification of the method shows good agreement with the reference DREAM code for 0D test cases, as well as for axisymmetric simulations of 15 MA ITER H-mode disruption scenarios. Furthermore, a proof-of-principle application to a DIII-D case demonstrates the framework’s capability to capture for the first time the hot tail generation in 3D MHD simulations in realistic geometry. Preliminary results suggest that the production of REs is significantly reduced by stochastic losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Self‐consistent transport simulation of boron dust particle injection in the peripheral plasma in Large Helical Device

Abstract The trajectories and the ablation positions of boron dust particles dropped from an impurity powder dropper in the peripheral plasma in the Large Helical Device (LHD) were calculated using a three‐dimensional edge plasma simulation code (EMC3‐EIRENE) and a dust transport simulation code (DUSTT). The simulation shows that the trajectory of the boron dust particles is deflected at the upper divertor leg due to the effect of the hydrogen plasma flow, and the ablation positions of the dust particles in an ergodic layer change toward the outboard side of the torus for higher plasma densities. The effect of the boron ion flow in the divertor leg on the deflection is investigated by coupling the two codes self‐consistently. The simulation predicts that the boron ions in the divertor leg, which are produced by sputtering on the divertor plates, which do not affect the change in the ablation positions. It also shows that the ablation positions move toward the inboard side and approach the Last Closed Flux Surface (LCFS) in case of increased boron dust drop rates, which is caused by the lowered plasma flow in the upper divertor leg due to the lowered electron temperature by radiation cooling by the dropped dust particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Density reconstruction in convergent high-energy-density systems using x-ray radiography and Bayesian inference

X-ray radiography is a technique frequently used to diagnose convergent high-energy-density (HED) systems, such as inertial confinement fusion implosion, and provides unique information that is not available through self-emission measurements. In this work, we investigate the scope and limits of that information using a radiography simulation combined with the Bayesian inference workflow. The accuracy of density reconstruction from simulated radiographs of spherical implosions driven with 27 kJ laser energy is assessed, including the increase or decrease in accuracy due to the addition of Lagrangian marker layers, Poisson noise, and improved prior information. This work is the first to present the full uncertainty distributions inferred from radiography analysis in HED systems and demonstrates the importance of constructing the full posterior probability density, as opposed to a point estimate, due to the modal structure of the likelihood surface introduced by typical experimental noise sources. This general methodology can be used both for robust analysis of radiographic data and for an improved design of radiography experiments by modeling the full experimental system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Hybrid-gyrokinetic simulations of low- n toroidal Alfvén eigenmodes using gKPSP

Here, we report a benchmark study of toroidal Alfvén eigenmode (TAE) simulation using the hybrid-gyrokinetic code GyroKinetic Plasma Simulation Program (gKPSP). A simulation capability for energetic particles based on the gyrokinetic δf method has been newly implemented in the gKPSP code. Benchmark simulations have been performed in both circular and realistic tokamak geometries. Good agreement has been found with previously reported results, demonstrating the new capability of the gKPSP code. We have investigated the effects of the distribution function on TAE stability by examining both isotropic and anisotropic slowing-down distributions of energetic particles. The slowing-down distribution produces a higher linear growth rate than a Maxwellian distribution, while a growth rate scan with the anisotropy shows an opposite trend. This can be attributed to competition between Landau damping and the linear drive, which are correlated with the fraction of resonant passing particles and their distribution in phase space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Full-torus impurity transport simulation for optimizing plasma discharge operation using a multi-species impurity powder dropper in the large helical device

The transport of impurities supplied by a multi-species impurity powder dropper (IPD) in the large helical device (LHD) is investigated using a three-dimensional peripheral plasma fluid code (EMC3-EIRENE) coupled with a dust transport simulation code (DUSTT). The trajectories of impurity powder particles (Boron, Carbon, Iron, and Tungsten) dropped from the IPD and the impurity transport in the peripheral plasma are studied in a full-torus geometry. The simulation reveals an appropriate size of the impurity powder particles and an optimum operational range of the dust drop rates for investigating the impurity transport without inducing radiation collapse. The simulation also predicts a favourable plasma discharge condition for wall conditioning (boronization) using the IPD in order to deposit boron to high plasma flux and neutral particle density areas in the divertor region in the inboard side of the torus.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Investigation of tearing mode stability near ideal stability boundaries via asymptotic matching techniques

A number of improvements to the TJ toroidal tearing mode code [Fitzpatrick, Phys. Plasmas 31, 102507 (2024)] are documented. The TJ code is also successfully benchmarked against the STRIDE toroidal tearing mode code [Glasser and Koleman, Phys. Plasmas 25, 082502 (2018)]. Finally, the new capabilities of the TJ code are used to investigate the stability of tearing modes in tokamak plasmas as an ideal stability boundary, associated with either an external-kink or an internal-kink mode, is approached. All elements of the tearing stability matrix are found to tend to infinity as an ideal stability boundary is approached. Furthermore, as the stability boundary is approached, the eigenfunctions of the various tearing modes in the plasma, which are decoupled by sheared plasma rotation, are all found to morph into that of the marginally stable ideal mode. However, the growth-rates and real frequencies of the various “ideal-tearing-modes” are different from one another. Moreover, the growth-rate of the ideal-tearing-mode that reconnects magnetic flux at the rational surface that lies closest to the edge of the plasma is the one that tends to a very large value as the stability boundary is approached. A relatively simple test for ideal stability that is capable of detecting stability boundaries for external-kink and internal-kink modes, even in the presence of a very close-fitting ideal wall, is described and verified.

FOS: Physical sciences↗
DOE OSTI2024

Accuracy of kinetic equilibrium reconstruction of NSTX and NSTX-U plasmas and its impact on the transport and stability analysis

An accurate magnetohydrodynamic (MHD) equilibrium reconstruction is an essential starting point for stability and transport plasma analysis. Herein this work describes an approach for obtaining kinetic equilibrium reconstructions using the OMFIT framework, which has been applied for the first time to spherical tokamak data from NSTX and NSTX-U. The EFIT equilibrium solver is integrated with experimental data analysis procedures and subsequent TRANSP transport simulations to enhance the accuracy of the reconstruction, in particular, at the edge region, by adding constraints on the total pressure and current density profiles, based on the transport code solution. The accuracy of the equilibrium reconstruction depends on the uncertainty and number of constraints, as well as the choice of basis functions to represent the pressure and current density profiles. Improved fidelity of the equilibrium reconstruction is demonstrated by reducing the variability of the magnetic axis and boundary locations from several centimeters, for reconstructions based on magnetic and experimental pressure constraints, to only several millimeters, for kinetic reconstructions based on transport code constraints, when different representations of basis functions were tested. The variability of the safety factor on axis was reduced ten times in the same sensitivity study. The accuracy of the equilibrium reconstruction and subsequent mapping of the experimental kinetic profile data have a significant impact on the trapped gyro Landau fluid and linear CGYRO turbulence simulations, which predict different spectra of unstable modes and turbulent fluxes for cases with different numbers of constraints in the equilibrium reconstruction. Conversely, the stability analysis performed using the GATO code shows plasmas that are stable to n = 1 MHD modes in both equilibria using magnetic and experimental pressure constraints as well as the transport code constrained equilibrium. However, a scan of parameters away from these conditions shows considerable deviation in the threshold of unstable modes between these reconstructions. Therefore, for reliable plasma analysis and use in turbulence and stability calculations, a high-fidelity equilibrium reconstruction with accurate kinetic constraints based on transport code solutions is necessary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Efficient data acquisition and training of collisional-radiative model artificial neural network surrogates through adaptive parameter space sampling

Abstract Effective plasma transport modeling of magnetically confined fusion devices relies on having an accurate understanding of the ion composition and radiative power losses of the plasma. Generally, these quantities can be obtained from solutions of a collisional-radiative (CR) model at each time step within a plasma transport simulation. However, even compact, approximate CR models can be computationally onerous to evaluate, and in-situ evaluation of these models within a larger plasma transport code can lead to a rigid bottleneck. As a way to bypass this bottleneck, we propose deploying artificial neural network (ANN) surrogates to allow rapid evaluation of the necessary plasma quantities. However, one issue with training an accurate ANN surrogate is the reliance on a sufficiently large and representative training and validation data set, which can be time-consuming to generate. In this work we explore a data-driven active learning and training routine to allow autonomous adaptive sampling of the problem parameter space to ensure a sufficiently large and meaningful set of training data is assembled for the network training. As a result, we can demonstrate approximately order-of-magnitude savings in required training data samples to produce an accurate surrogate.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Progress with the 5D full-F continuum gyrokinetic code COGENT

COGENT is an Eulerian gyrokinetic code being developed for edge plasma modelling. The code is distinguished by the use of a high-order finite-volume (conservative) discretization combined with mapped multi-block grid technology. Our recent work is focused on the development of a 5D full-F COGENT version.Anumerical algorithm utilizing locally a field-aligned multi-block coordinate system is implemented to facilitate simulations of highly anisotropic microturbulence in the presence of a strong magnetic shear. In this approach, the toroidal direction is divided into blocks such that,within each block, the cells are field-aligned and a non-matching (non-conformal) grid interface is allowed at the block boundaries. In this paper we report on details of the numerical implementation and present preliminary results of verification studies performed for the case of the ion temperature gradient (ITG) instability in a sheared toroidal annulus geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Property of neoclassical GAMs induced by pellet generated plasma perturbations in the gyrokinetic code XGC

A pellet source model has been implemented into the gyrokinetic code XGC and applied to neoclassical geodesic acoustic mode (GAM) study as the first step to investigate potentially rapid kinetic spread of pellet-born particles following their injection into plasma. Here in this study, GAM oscillations of the radial electric field, as well as of their effect on the radial particle and energy fluxes, are studied and the observed frequencies agree with theoretical expectations. It is verified that (i) GAM oscillations are driven both within the pellet-fuelled region and for locations at a larger radius than this region and not for locations radially inside the pellet-fuelled region, and that, (ii) even though the poloidal spread along the magnetic field lines is fast, the time-averaged radial plasma transport under GAM oscillations is kept to roughly the same level as the neoclassical transport in the absence of plasma turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Numerical implications of including drifts in SOLPS-ITER simulations of EAST

The inclusion of drifts in plasma edge codes like SOLPS-ITER is required to match simulation data with experimental profiles. However, this remains numerically challenging. In this paper, the effect of some numerical factors on the final plasma solution is investigated. This study is performed on three EAST simulations in the upper single null configuration: an attached purely deuterium case, an attached case with limited Ne-seeding, and a detached Ne-seeded case. The effects of the anomalous conductivity and anomalous thermo-electric coefficient on the plasma potential are investigated. Next, the effect of the employed grids is shown. In order to investigate these effects, accurate drift simulations are needed. Therefore, the employed time step and numerical parameters are discussed for the three studied simulations. For all presented simulations, it is verified that the restriction of the grid to the first flux surface tangent to the main chamber wall is sufficient within the context of non-extended simulations. This means that the main power dissipation takes place inside the simulated domain, and only a small fraction of the power is leaving the B2.5 grid through the grid boundary closest to the first wall. Finally, the effect of drifts on the asymmetry between the inner and outer target for EAST simulations is demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Framework for assessment of magnetic equilibrium controller performance on the MAST upgrade spherical tokamak

Here, in this work we present the assessment framework for magnetic equilibrium controllers on MAST Upgrade spherical tokamak (MAST-U) spherical tokamak. Such controllers are essential for the MAST-U since exhaust physics and core-edge integration studies require advanced divertor plasma configurations. The developed framework is based on the TokSys suite of plasma control codes, which was adapted and upgraded for MAST-U. However, extra capabilities were added on top of TokSys to support the development of new control algorithms, deployment of controllers to the plasma control system (PCS) and evaluation of their performance. The controller assessment was realized via closed-loop integrated control simulations with the actual MAST-U PCS and different physics-based plasma models. Since all components of the assessment chain were experimentally validated, these simulations provide qualified controllers applicable for direct use in the experiment. This resulted in the successful experimental demonstration of advanced plasma shape control on MAST-U with minimal on-machine development time. A similar methodology would be beneficial to other tokamaks, both existing and future.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Influence of the inverse sheath on divertor plasma performance in tokamak edge plasma simulations

Recently, it was shown that strong electron thermionic emission from material walls could result in the formation of an “inverse sheath”, which prevents the flow of cold ions to the wall. Such regimes look very favorably from the point of view of plasma-material interactions at the edge of magnetic fusion devices, where the problem of the erosion of plasma facing components under ion irradiation is one of the key issues for developing of future magnetic fusion reactors. However, it is not clear whether such regimes are compatible with edge plasma parameters and heat removal requirements in fusion reactors.To address the issue of practicality of the “inverse sheath” regime for edge tokamak plasma conditions, we perform a set of numerical simulations with 2D edge plasma transport code UEDGE for a DIII-D-like geometry and magnetic configuration.To describe both “standard” and “inverse sheath” conditions within the framework of the UEDGE code (which does not consider the sheath region per se), at the material surfaces, we apply effective boundary conditions which emulate both “standard” and“inverse sheath” regimes. We demonstrate that for the same input parameters, spatial distributions of edge plasma parameters corresponding to detached divertor and“inverse sheath” regimes are similar, with only a few minor differences. We discuss the compatibility of “inverse sheath” regimes with core plasma parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗