Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polar Metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Coupled surface plasmon–phonon polariton nanocavity arrays for enhanced mid-infrared absorption

Abstract Resonant optical cavities are essential components in mid-infrared applications. However, typical film-type cavities require multilayer stacks with a micron-thick spacer due to mid-infrared wavelengths, and their performance is limited by narrow frequency tunability and angular sensitivity. We propose and experimentally demonstrate the subwavelength-scale (≈ λ 0 /150) resonant nanocavity arrays that enhance the absorption spectrum of the device in the mid-infrared (10–12 microns) via excitation of coupled surface plasmon–phonon polaritons. The proposed metal–insulator–polar dielectric (gold–silicon–silicon carbide) structure supports a guided mode of the coupled surface polaritons in the lateral direction while vertically confining the mid-infrared wave within the 80 nm thick dielectric spacer. In particular, the subwavelength-scale (≈ λ 0 /10) gratings are imposed to form Fabry–Pérot cavity arrays displaying angle-insensitive and frequency-tunable absorption of up to 80% of the optical power in the mid-infrared. Our work should benefit diverse mid-infrared applications and novel designs of polariton-based photonic devices.

42 ENGINEERING↗
DOE OSTI2023

Signatures of Non-universal Quantum Dynamics of Ultracold Chemical Reactions of Polar Alkali Dimer Molecules with Alkali Metal Atoms: Li( 2 S) + NaLi( a 3 Σ + ) → Na( 2 S) + Li 2 ( a 3 Σ u + )

Ultracold chemical reactions of weakly bound triplet-state alkali metal dimer molecules have recently attracted much experimental interest. Here we perform rigorous quantum scattering calculations with a new ab initio potential energy surface to explore the chemical reaction of spin-polarized NaLi(a 3 Σ + ) and Li( 2 S) to form Li 2 (a 3 Σ u + ) and Na( 2 S). The reaction is exothermic and proceeds readily at ultralow temperatures. Significantly, we observe strong sensitivity of the total reaction rate to small variations of the three-body part of the Li 2 Na interaction at short range, which we attribute to a relatively small number of open Li 2 (a 3 Σ u + ) product channels populated in the reaction. This provides the first signature of highly non-universal dynamics seen in rigorous quantum reactive scattering calculations of an ultracold exothermic insertion reaction involving a polar alkali dimer molecule, opening up the possibility of probing microscopic interactions in atom+molecule collision complexes via ultracold reactive scattering experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photoinduced anomalous Hall effect in two-dimensional transition metal dichalcogenides

A circularly polarized ac pump field illuminated near resonance on two-dimensional transition metal dichalcogenides (TMDs) produces an anomalous Hall effect in response to a dc bias field. In this work, we develop a theory for this photoinduced anomalous Hall effect in undoped TMDs irradiated by a strong coherent laser field. The strong field renormalizes the equilibrium bands and opens up a dynamical energy gap where single-photon resonance occurs. The resulting photon dressed states, or Floquet states, are treated within the rotating-wave approximation. A quantum kinetic equation approach is developed to study the nonequilibrium density matrix and time-averaged transport currents under the simultaneous influence of the strong ac pump field and the weak dc probe field. Dissipative effects are taken into account in the kinetic equation that captures relaxation and dephasing. The photoinduced longitudinal and Hall conductivities display notable resonant signatures when the pump field frequency reaches the spin-split interband transition energies. Rather than valley polarization, we find that the anomalous Hall current is mainly driven by the intraband response of photon-dressed electron populations near the dynamical gap at both valleys, accompanied by a smaller contribution due to the interband response. In conclusion, these findings highlight the importance of photon-dressed bands and nonequilibrium distribution functions in achieving a proper understanding of the photoinduced anomalous Hall effect in a strong pump field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Electronic structure and magnetism of pristine, defected, and strained $\mathrm{Ti_2N}$ $\mathrm{MX}$ene

Here, from first principles electronic structure calculations, we unravel the evolution of structural, electronic, and magnetic properties of pristine, defected, and strained titanium nitride MXene with different functional groups (-F, -O, -H, and -OH). The formation and cohesive energies reveal their chemical stability. The dynamical stability of Ti 2 N mono-layer is also confirmed by phonon calculations. The MAX phase and defect free functionalized MXenes are metallic except for oxygen terminated (Ti 2 NO 2 ) one which is 100% spin polarized half-metallic ferromagnet. The spin–orbit coupling significantly influences the bare MXene (Ti 2 N) to exhibit Dirac topology and band inversion near the high symmetry directions. The strain effect sways the Fermi level thereby shifting it towards lower energy state under compression and towards higher energy state under tensile strain in Ti 2 NH 2 . The Ti 2 NO 2 exhibits exotic electronic structure not only in pristine but also in strained and defected structures. Its half-metallic nature changes to semi-metallic under 1% compression and it is completely destroyed under 2% compression. In single vacancy defect, its band structure remarkably transforms from half-metallic to semi-conducting with large band gap in 12.5% Ti, weakly semi-conducting in 5.5% Ti, and semi-metallic in 12.5% O. The 25% N defect changes its half-metallic characteristic to metallic. Further, the 12.5% Co substitution preserves its half-metallic character, whereas Mn substitution allows it to convert half-metallic characteristic into weak semi-metallic characteristic preserving ferromagnetism. However, Cr substitution converts half-metallic ferromagnetic state to half-metallic anti-ferromagnetic state. The understanding made here on collective structural stability, and electronic band structure, and magnetic phenomena in novel 2D Ti 2 N derived MXenes open up their possibility in designing them for synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Robust Large-Scale Dynamic Windows using Reversible Metal Electrodeposition

This project funded the study and development of dynamic windows based on reversible metal electrodeposition (RME). Dynamic windows allow user control over light and heat flow into and out of buildings, which offer both advantages in building aesthetics (with worker productivity improvement of 2%) and energy efficiency (up to 20% savings) compared to static controls such as low emissivity coatings and blinds/shades. Despite these advantages, dynamic windows, which traditionally rely on electrochromic metal oxides or conductive organic molecules for light modulation have failed to significantly impact the market due to issues related to cost, color, and optical dynamic range. Dynamic windows based on reversible metal electrodeposition (RME) are an exciting alternative approach and have the potential to overcome the issues associated with traditional technologies. A RME dynamic window is an electrochemical cell that modulates light using the reversible electrodeposition of metal on and off a transparent conducting oxide (TCO), which serves as the working electrode. The electrolyte has nearly colorless metal salts dissolved, and application of a cathodic potential on the TCO reduces the metal cations across the TCO surface to their metallic form, making a thin film that is efficient at blocking out light. A reverse in polarity oxidizes the metal, where it dissolves into solution, returning the window back to transparent. The counter electrode typically employed is a metal mesh, which is used to balance the electrochemical reactions happening on the TCO working electrode. These RME dynamic windows have the largest dynamic range (capable of reaching <<0.1% transmission) with color neutral tinting of any existing technology using solution processed techniques, which positions the technology as a promising candidate to penetrate the residential market. We have successfully scaled up the windows from 25 cm2 to 929 cm 2 , and we have demonstrated significant improvements to both the cycle life (10,000 cycles in a 3-electrode half-cell) and shelf life (>1 month) of our windows. We have published our work in high impact journals (6 published and 2 manuscripts in prep), filed 5 patents, and have incorporated TYNT Technologies to commercialize the technology.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Metal Ion Control of Photoinduced Electron Spin Polarization in Electronic Ground States

The sign and intensity of photoinduced electron spin polarization (ESP) in the electronic ground doublet states ( 2 S o /D o ) of chromophore-radical complexes can be controlled by changing the nature of the metal ion. The complexes consist of an organic radical (nitronylnitroxide, NN) covalently attached to a donor acceptor chromophore via a meta-phenylene bridge, (bpy)M(CAT-m-Ph-NN) (1) (bpy = 4,4’-di-tert-butyl-2,2’-bipyridine, M = Pd II (1-Pd) or Pt II (1-Pt), CAT = 3-tert-butylcatecholate, m-Ph = meta-phenylene). In both complexes, photoexcitation with visible light pro-duces an initial exchange-coupled, 3-spin (bpy •- , CAT +• = semiquinone (SQ) and NN • ), charge-separated doublet 2 S 1 (S = chromophore excited spin singlet configuration) excited state that rapidly decays to the ground state via a 2 T 1 (T = chromophore excited spin triplet configuration) state. This process is not expected to be spin selective and only very weak emissive ESP is found for 1-Pd. In contrast, strong absorptive ESP is generated in 1-Pt. Furthermore, it is postulated that zero-field splitting induced transitions between the chromophoric 2 T 1 and 4 T 1 states (1-Pd and 1-Pt) and spin-orbit induced transitions between 2 T 1 and NN-based quartet states (1-Pt) ac-count for the differences in polarization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effect of Ni deposition on CrI 3 monolayer: First-principles study

In our recent experimental work, we demonstrated that Ni thin film deposition can be used to tune the surface magnetic states in bulk CrI 3 . Here, we present the results of a computational study of Ni deposition on a CrI 3 monolayer. In particular, we compare structural, electronic, and magnetic properties of three different systems: a pristine CrI 3 monolayer, a CrI 3 monolayer with partial Ni coverage, and a CrI 3 monolayer with full Ni coverage. The corresponding cells used in our calculations are Cr 2 I 6 , Cr 2 I 6 Ni 1 , and Cr 2 I 6 Ni 3 . In Cr 2 I 6 Ni 1 , the Ni atom is positioned over the hollow site, which corresponds to the lowest energy configuration. In Cr 2 I 6 Ni 3 , the three Ni atoms are positioned over the single hollow site, and over the two Cr sites. Our calculations indicate that the partial coverage of CrI 3 monolayer with Ni retains the semiconducting nature of the parent compound, but results in a strong reduction of the energy band gap. At the same time, the full coverage of CrI 3 monolayer with Ni results in a metallic transition, with a highly spin-polarized (possibly half-metallic) electronic structure. The magnetic alignment of the CrI 3 monolayer with the deposited Ni is ferrimagnetic, due to the anti-aligned magnetic moments of Cr and Ni atoms. While the partial coverage of the CrI 3 monolayer with Ni has a moderate impact on the lattice parameter of the parent compound, full coverage by Ni results in a significant increase of the lattice constant. For both partial and full coverages, the lowest energy configuration corresponds to the Ni atoms being approximately aligned with the out-of-plane coordinate of the surface iodine layer. In addition, in the full coverage mode, the Cr layer exhibits a significant shift away from the Ni atoms, effectively “detaching” the Ni / I atomic layer from the rest of the cell.

2D magnetism↗
DOE OSTI2024

Magnetism and metallicity in moiré transition metal dichalcogenides

The ability to control the properties of twisted bilayer transition metal dichalcogenides in situ makes them an ideal platform for investigating the interplay of strong correlations and geometric frustration. Of particular interest are the low energy scales, which make it possible to experimentally access both temperature and magnetic fields that are of the order of the bandwidth or the correlation scale. In this manuscript, we analyze the moiré Hubbard model, believed to describe the low energy physics of an important subclass of the twisted bilayer compounds. We establish its magnetic and the metal–insulator phase diagram for the full range of magnetic fields up to the fully spin-polarized state. We find a rich phase diagram including fully and partially polarized insulating and metallic phases of which we determine the interplay of magnetic order, Zeeman-field, and metallicity, and make connection to recent experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Emerging Functionality in Transition-Metal Compounds Driven by Spatial Confinement and Broken Symmetry

This research project investigates the emerging functionality in transition-metal-compounds (TMCs) driven by spatial confinement and broken symmetry. It combines advanced growth capabilities with cutting-edge characterization and first principles theory to probe and control the properties of TMC interfaces, including the utilization and development of state-of-the-art atomically resolved electron microscopy and spectroscopy to determine the structure, composition, and bonding at TMC interfaces. The proposed research will focus on four challenging areas: 1) manipulate interfaces to design new material phases such as magnetic metals with unique polar structure (net dipole) to achieve multiple functionality; 2) explore electronic mismatch or screening at interfaces of insulating/poor metal TMCs to produce novel electronic and magnetic properties; 3) elucidate and exploit the role of defects, both point and extended, on the functionality of interfaces; 4) develop advanced electron microscopy/spectroscopy techniques to explore temperature dependent phase transitions and couple these structural tools with new nonlinear optical probes of the electronic structure. The research team aims to close the materials-by-design loop of make, measure, model, and modify. The program promises to enhance our ability to engineer the desired physical properties at interfaces, superlattices (periodic arrays of films of different compounds), and heterostructures of TMCs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Turn‐on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s 2 Metal Centers

Abstract Introducing chirality into the metal‐halide hybrids has enabled many emerging properties including chiroptical activity, spin‐dependent transport, and ferroelectricity. However, most of the chiral metal‐halide hybrids to date are non‐emissive, and the underlying mechanism remains elusive. Here, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal‐halide hybrids. We demonstrate that alloying Sb 3+ into chiral indium‐chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium‐antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10 −2 . Mechanistic studies reveal that the emission originates from the self‐trapped excitons centered in 5s 2 Sb 3+ . Moreover, near‐ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal‐halide hybrids.

Wang, Zhiyu↗
DOE OSTI2021

Metal foils with ordered crystal structure and method for producing metal foils

A method for producing a metal foil comprising depositing metal onto an oxidizable substrate to form a metal film on the substrate; oxidizing the substrate at an interface between the metal film and the substrate; and removing the metal film from the substrate to yield a metal foil. A method for forming a thin metal film comprising pre-polarizing a single-crystal Si substrate by application of a potential which is negative of a potential at which Si oxidizes, which pre-polarization occurs in the presence of metal ions to form metal growth nucleation sites on the substrate, followed by application of a potential at which both oxidation of Si and electrodeposition of the metal occur to grow the metal film and oxidize the Si to SiOx, which potential is more positive than the potential applied in the pre-polarization step.

Switzer, Jay A.↗
DOE OSTI2024

Magnetic field induced partially polarized chiral spin liquid in a transition metal dichalcogenide moiré system

As one of the most intriguing states of matter, the chiral spin liquid (CSL) has attracted much scientific interest while its existence and mechanism in crystalline strongly correlated systems remain hotly debated. On the other hand, strong correlation driven emergent phenomena can be realized in twisted transition metal dichalcogenide bilayers with a tremendously tunable large length scale providing a new platform for the emergence of CSLs. Here, we focus on a strongly correlated model relevant to heterobilayer WSe 2 /MoSe 2 and investigate the Mott insulating phase at half filling under an out-of-plane magnetic field. Considering both its orbital and spin Zeeman effects we identify three conventionally ordered phases including a 120° Néel phase, a stripe phase, and an up-up-down phase. For intermediate fields an emergent quantum spin liquid phase is identified with partial spin polarization. We further characterize its topological nature as the v = 1/2 Laughlin CSL through the topological entanglement spectrum and quantized spin pumping under spin flux insertion. In addition, we map out the quantum phase diagram for different twisted angles in an experimentally accessible parameter regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

On the Use of Aqueous Metal-Aqua p K a Values as a Descriptor of Lewis Acidity

The behavior of Lewis acidic metal ions in multimetallic systems has become a subject of intense interest in recent years. Parametrizing the behavior of these ions in non-aqueous conditions, commonly used in the field, is challenging due to the lack of direct measures of the Lewis acidity of metal ions in polar organic solvents. Here, we report the use of triphenylphosphine oxide (TPPO) as a 31 P nuclear magnetic resonance (NMR) probe to quantify the Lewis acidity of a library of metal triflate salts using the Gutmann-Beckett method. Plots of the pK a values of the corresponding metal-aqua species, [M(H 2 O) m ] n+ , measured in H 2 O vs. the 31 P NMR shifts of TPPO in the presence of these metals in deuterated acetonitrile (d3-MeCN) and deuterated dichloromethane (CD 2 Cl 2 ) display tightly co-linear relationships, suggesting similar behavior for these ions in water, d 3 -MeCN, and CD 2 Cl 2 . This collinearity reinforces the utility of the common approach of using the aqueous pK a values as a descriptor of Lewis acidity, regardless of the solvent used in the immediate experiments, and provides an insight into the usefulness of this descriptor in wide-ranging applications. Titration studies in d 3 -MeCN suggest 1:1 binding of TPPO with monovalent ions, greater than 1:1 binding with divalent ions, and formation of multiple species with the highly Lewis acidic trivalent ions. Altogether, these data suggest that both aqueous pK a values and other single-measurement descriptors, while useful, provide only a snapshot of the influence of Lewis acidity on multimetallic chemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Turn-on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s 2 Metal Centers

Introducing chirality into the metal-halide hybrids has enabled many emerging properties including chiroptical activity, spin-dependent transport, and ferroelectricity. However, most of the chiral metal-halide hybrids to date are non-emissive, and the underlying mechanism remains elusive. Here, in this study, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal-halide hybrids. We demonstrate that alloying Sb 3+ into chiral indium-chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium-antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10 -2 . Mechanistic studies reveal that the emission originates from the self-trapped excitons centered in 5s 2 Sb 3+ . Moreover, near-ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal-halide hybrids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thermally tunable mid-infrared nanocavity resonance of coupled surface plasmon-phonon polaritons

Phase-change materials (PCMs) are essential for achieving tunability of metasurfaces. However, they frequently face limitations in the long-wave infrared range because of their lossy behavior. Here, we experimentally demonstrate a thermally tunable mid-infrared nanocavity resonance from coupled surface plasmon-phonon polaritons that are supported within a trilayer structure of metal-PCM layer-polar dielectric (Au-VO 2 -SiC). The top metal structures configure the Fabry-Perot cavity resonance near 840 cm −1 (11.9 µm), which is sensitively tunable and reversible with small changes in the VO 2 refractive index ∆n near below its insulator-to-metal phase transition temperature where the loss is small. The maximum resonance shift of 7.7 cm −1 is induced by a small ∆n = 0.3 over a temperature change of 3°C. The tuning figure of merit is comparable to the current standard in photonic modulator applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Growth Dynamics and Electron Reflectivity in Ultrathin Films of Chiral Heptahelicene on Metal (100) Surfaces Studied by Spin-Polarized Low Energy Electron Microscopy

Interaction of electrons with chiral matter gives rise to interesting phenomena such as the chirality-induced spin selectivity. The interdependence of reflectivity of spin-polarized low energy electrons and the absolute handedness of chiral molecules is investigated. First, the growth of homochiral films of helical aromatic hydrocarbons, so-called helicenes, on a Cu(100) surface is studied by means of low energy electron microscopy and scanning tunneling microscopy in ultrahigh vacuum. As soon as the coverage exceeds one monolayer, double-layer nucleation and growth is favored such that depletion in the first layer occurs. Spatially resolved work function measurements show that second-layer patches have a lower work function than first-layer areas. Reflectivity spectra of spin-polarized electrons do not show any asymmetry between homochiral films of the enantiomers. Laterally resolved work function measurements do not confirm work function differences such as those reported earlier for photoelectron studies of chiral peptide films on ferromagnetic substrates.

36 MATERIALS SCIENCE↗