Prandtl Number Effects on Unsteady Forced-convection Heat Transfer
Explore the source record for details and available documents.
Sparrow, E M↗
SEARCH · Search NASA
Results for “Prandtl numbers”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Compressible Laminar Boundary Layer over a Yawed Infinite Cylinder with Heat Transfer and Arbitrary Prandtl Number
The equations are presented for the development of the compressible laminar boundary layer over a yawed infinite cylinder. For compressible flow with a pressure gradient the chordwise and spanwise flows are not independent. Using the Stewartson transformation and a linear viscosity-temperature relation yields a set of three simultaneous ordinary differential equations in a form yielding similar solutions. These equations are solved for stagnation-line flow for surface temperatures from zero to twice the free-stream stagnation temperature and for a wide range of yaw angle and free-stream Mach number. The results indicate that the effect of yaw on the heat-transfer coefficient at the stagnation line depends markedly on the free-stream Mach number. An unusual result of the solutions is that for large yaw angles and stream Mach numbers the chordwise velocity within the boundary layer exceeds the local external chordwise velocity, even for a highly cooled wall.
Reshotko, Eli↗
Investigation of Thermocapillary Convection of High Prandtl Number Fluid Under Microgravity
Thermocapillary convection in a liquid bridge, which is suspended between two coaxial disks under zero gravity, has been investigated numerically. The Navier-Stokes equations coupled with the energy conservation equation are solved on a staggered grid, and the level set approach is used to capture the free surface deformation of the liquid bridge. The velocity and temperature distributions inside the liquid bridge are analyzed. It is shown from this work that as the development of the thermocapillary convection, the center of the vortex inside the liquid bridge moves down and reaches an equilibrium position gradually. The temperature gradients in the regions near the upper center axis and the bottom cold corner are higher than those in the other regions.
Liang, Ruquan↗
A Multiple-Grid Lattice Boltzmann Method for Natural Convection under Low and High Prandtl Numbers
Explore the source record for details and available documents.
Seyed Amin Nabavizadeh↗
Numerical solutions of single-mode convection equations
In the Boussinesq approximation, single-mode equations describing thermal convection are constructed by expanding the fluctuating velocity and temperature fields in a complete set of functions (or planforms) of the horizontal coordinates and retaining just one term. Numerical solutions of the single-mode equations are investigated, chief consideration being given to hexagonal planforms. Extensive surveys of steady solutions are presented for various Rayleigh numbers, Prandtl numbers, and horizontal wavenumbers. The dependences on Rayleigh number and Prandtl number at very large Rayleigh number are in satisfactory agreement with the results of asymptotic expansions.
Toomre, J.↗
Optimization of Dimensions of Smooth and Twisted-Tape-Inserted Tubes for Heat Transfer with NaCl/KCl/MgCl 2 Molten Salts by Principle of Entropy Generation Minimization
The entropy generation minimization principle is used as the criterion to optimize the flow and heat transfer of solar collectors and heat exchangers that use molten salts NaCl–KCl–MgCl 2 and KCl–MgCl 2 . The Gnielinski correlation for the Nusselt number versus Reynolds number, as well as the Moody friction factor given by Petukhov, was used for the calculation of the convective heat transfer coefficient and pressure loss due to friction in smooth tubes. For twisted-tap-inserted tube, equations of Nu and friction factor provided by Manglik and Bergles were used. The objective function, the entropy generation rate of the heat transfer system, was expressed as the function of Reynolds number, Prandtl number, heating flux, tube diameter, etc. As a result of the analysis, the optimum Reynolds number was determined and thereby to determine the optimum Nusselt number, convective heat transfer coefficient, friction factor, and tube diameter, which also allows the calculation of optimum flow velocity. The analysis was conducted in the fluid temperature range of 500–700 °C, which covers the operation temperature for supercritical CO 2 power cycles in concentrated solar power (CSP) system. Here, optimized results from the smooth tube and twisted-tap-inserted tube are compared, which is important to the design of solar receivers for CSP systems.
14 SOLAR ENERGY↗
Theoretical Study of Natural Convection Flows in Closed-End Cylindrical Vessels Final Report
This study is concerned with the analytical solutions of natural convection flows in closed-end cylindrical vessels to obtain exact solutions of temperature and velocity distribution in the laminar flow region under steady state condition. The temperature and velocity distributions, in general power series of displacements, are substituted into the three basic equations of continuity, momentum and energy. The relationships between coefficients of all powers are obtained through initial and boundary conditions and recurrence formulae. For constant wall temperature conditions the general solution of temperature and velocity may be expressed as a function of displacement, geometry ratio and Rayleigh number. Prandtl number does not enter as an independent parameter.
Convective flow↗
A model to determine open or closed cellular convection
The horizontal asymmetry of cellular convection is demonstrated to be detectable by consideration of the vertical asymmetry of the driving force. A two-dimensional numerical model for convection in an internally heated and cooled fluid is presented, based on equations for the conservation of temperature and vorticity. Attention is focused on the steady-state finite-amplitude solutions for fixed Rayleigh number, Prandtl number, and aspect ratio. Temperature in the model corresponds to potential temperature under dry conditions and the equivalent potential temperature under saturated conditions. Slowly varying convection driven by asymmetric boundary fluxes is expressed in terms of steady-state convection driven by an asymmetric internal heat source. It is shown that heating near the ground produces open convection patterns where most of the fluid is descending, while cooling near the top of the flow leads to closed cellular patterns with a preponderance of ascending fluid. Extension of the model to three dimensions is indicated.
Helfand, H. M.↗
A numerical study of transient heat and mass transfer in crystal growth
A numerical analysis of transient heat and solute transport across a rectangular cavity is performed. Five nonlinear partial differential equations which govern the conservation of mass, momentum, energy and solute concentration related to crystal growth in solution, are simultaneously integrated by a numerical method based on the SIMPLE algorithm. Numerical results showed that the flow, temperature and solute fields are dependent on thermal and solutal Grashoff number, Prandtl number, Schmidt number and aspect ratio. The average Nusselt and Sherwood numbers evaluated at the center of the cavity decrease markedly when the solutal buoyancy force acts in the opposite direction to the thermal buoyancy force. When the solutal and thermal buoyancy forces act in the same direction, however, Sherwood number increases significantly and yet Nusselt number decreases. Overall effects of convection on the crystal growth are seen to be an enhancement of growth rate as expected but with highly nonuniform spatial growth variations.
Han, Samuel Bang-Moo↗
Numerical studies of convective heat transfer in an inclined semiannular enclosure
Natural convection heat transfer in a two-dimensional differentially heated semiannular enclosure is studied. The enclosure is isothermally heated and cooled at the inner and outer walls, respectively. A commercial software based on the SIMPLER algorithm was used to simulate the velocity and temperature profiles. Various parameters that affect the momentum and heat transfer processes were examined. These parameters include the Rayleigh number, Prandtl number, radius ratio, and the angle of inclination. A flow regime extending from conduction-dominated to convection-dominated flow was examined. The computed results of heat transfer are presented as a function of flow parameter and geometric factors. It is found that the heat transfer rate attains a minimum when the enclosure is tilted about +50 deg with respect to the gravitational direction.
Wang, Lin-Wen↗
Interaction of surface radiation with convection in crystal growth by physical vapor transport
Growth of single crystals from vapor in closed ampoules is governed by an intricate interplay between mass, momentum and heat transfer processes. The objective of this study is to examine and isolate the effects of surface radiation heat transfer on the vapor transport process using a mathematical model. The model consists of a set of coupled nonlinear partial differential equations for conservation of mass, momentum, energy and species, and the integrodifferential equations which represent radiative exchange. It depends on five important physical parameters. These are Grashof number, Prandtl number, Schmidt number, aspect ratio and the radiation-conduction number. The effects of these dimensionless groupings are systematically investigated. From the cases examined, it is concluded that surface radiation can change the flow structure appreciably. This is especially true in microgravity environment where radiation competes primarily with conduction in modifying the thermal profiles. The numerical results also show that in the presence of radiation, the top heating configuration (source on top) is no longer stable and that near the growing crystal, radiation-induced vortices can introduce significant nonuniformities in the growth flux.
Kassemi, Mohammad↗
Numerical investigation of the thermal stratification in cryogenic tanks subjected to wall heat flux
The flow pattern and thermal stratification of a cryogenic cylindrical tank are numerically studied. The tank sidewall is subjected to either a uniform heat-flux or two discrete levels of uniform heat-flux at the upper and lower halves of the tank wall. The tank bottom is kept at a constant temperature controlled by the heat exchanger of a thermodynamic vent system. The tank pressure is also assumed constant resulting in a constant saturation temperature at the interface which is higher than the tank bottom temperature. The effects of vapor motion and vapor superheat on the mass and heat transfer processes at the interface are assumed negligible such that the calculations of liquid region can be decoupled from the vapor region. Dimensionless steady-state conservation equations are solved by a finite-difference method. The effects of modified Rayleigh number, Prandtl number, tank aspect ratio, wall heat-flux parameter, and wall heat-flux distribution on the liquid velocity and temperature fields are investigated. Also, their effects on the rate of heat transfer through the interface and the tank bottom are examined.
Lin, Chin-Shun↗
Numerical studies of convective heat transfer in an inclined semi-annular enclosure
Natural convection heat transfer in a two-dimensional differentially heated semiannular enclosure is studied. The enclosure is isothermally heated and cooled at the inner and outer walls, respectively. A commercial software based on the SIMPLER algorithm was used to simulate the velocity and temperature profiles. Various parameters that affect the momentum and heat transfer processes were examined. These parameters include the Rayleigh number, Prandtl number, radius ratio, and the angle of inclination. A flow regime extending from conduction-dominated to convection-dominated flow was examined. The computed results of heat transfer are presented as a function of flow parameter and geometric factors. It is found that the heat transfer rate attains a minimum when the enclosure is tilted about +50 deg with respect to the gravitational direction.
Wang, L.-W.↗
Numerical investigation of the thermal stratification in cryogenic tanks subjected to wall heat flux
The flow pattern and thermal stratification of a cryogenic cylindrical tank are numerically studied. The tank sidewall is subjected to either a uniform heat-flux or two discrete levels of uniform heat-flux at the upper and lower halves of the tank wall. The tank bottom is kept at a constant temperature controlled by the heat exchanger of a thermodynamic vent system. The tank pressure is also assumed constant resulting in a constant saturation temperature at the interface which is higher than the tank bottom temperature. The effects of vapor motion and vapor superheat on the mass and heat transfer processes at the interface are assumed negligible such that the calculations of liquid region can be decoupled from the vapor region. Dimensionless steady-state conservation equations are solved by a finite-difference method. The effects of modified Rayleigh number, Prandtl number, tank aspect ratio, wall heat-flux parameter, and wall heat-flux distribution on the liquid velocity and temperature fields are investigated. Also, their effects on the rate of heat transfer through the interface and the tank bottom are examined.
Lin, Chin-Shun↗
A unique high heat flux facility for testing hypersonic engine components
This paper describes the Hot Gas Facility, a unique, reliable, and cost-effective high-heat-flux facility for testing hypersonic engine components developed at the NASA Lewis Research Center. The Hot Gas Facility is capable of providing heat fluxes ranging from 200 Btu/sq ft per sec on flat surfaces up to 8000 Btu/sq ft per sec at a leading edge stagnation point. The usefulness of the Hot Gas Facility for the NASP community was demonstrated by testing hydrogen-cooled structures over a range of temperatures and pressures. Ranges of the Reynolds numbers, Prandtl numbers, enthalpy, and heat fluxes similar to those expected during hypersonic flights were achieved.
Melis, Matthew E.↗
Interference heating due to shock wave impingement on laminar boundary layers.
Laminar interference heating correlations have been developed based on recent experimental data obtained with wedge/flat plate models for wide ranges of Reynolds number and shock strength. Two correlation techniques were developed using the Eckert reference method. The peak interference Stanton number was first correlated with shock strength, Reynolds number, and Prandtl number based on flow conditions upstream of the interference region. The second approach was made by correlating peak interference Stanton number with only Reynolds number and Prandtl number based on downstream flow conditions. The laminar boundary layer remains laminar when both Reynolds number and shock strength are low but becomes transitional or turbulent when Reynolds number or/and shock strength are increased.
Hung, F. T.↗
Linear viscous stability analysis of the stratified Bickley jet
The stability of the stably stratified Bickley jet to small disturbances in a viscous, heat conducting fluid is explored by numerical integration of the governing differential equation. Curves of neutral stability are presented in the alpha-R plane and the parametric dependence of these curves upon Richardson number and Prandtl number is examined. The results show a curious bimodal behavior of the curve of neutral stability for small Richardson numbers. In addition, closed neutral curves are found for Richardson numbers in excess of the critical value for the inviscid flow. The unstable regions in the interior of these curves increase with decreasing Prandtl number. Energy balances are computed which show the relative magnitude of the Reynolds stress production, buoyancy dissipation, and viscous dissipation terms across the flow. As the thermal diffusivity becomes large compared with the kinematic viscosity, the buoyancy term is suppressed and the thermal stratification becomes irrelevant.
Gage, K. S.↗
Effect of a crystal-melt interface on Taylor-vortex flow
The linear stability of circular Couette flow between concentric infinite cylinders is considered for the case that the stationary outer cylinder is a crystal-melt interface rather than a rigid surface. A radial temperature difference is maintained across the liquid gap, and equations for heat transport in the crystal and melt phases are included to extend the ordinary formulation of this problem. The stability of this two-phase system depends on the Prandtl number. For small Prandtl number the linear stability of the two-phase system is given by the classical results for a rigid-walled system. For increasing values of the Prandtl number, convective heat transport becomes significant and the system becomes increasingly less stable. Previous results in a narrow-gap approximation are extended to the case of a finite gap, and both axisymmetric and nonaxisymmetric disturbance modes are considered. The two-phase system becomes less stable as the finite gap tends to the narrow-gap limit. The two-phase system is more stable to nonaxisymmetric modes with azimuthal wavenumber n = 1; the stability of these n = 1 modes is sensitive to the latent heat of fusion.
Mcfadden, G. B.↗