Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process-based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Impacts of Pasture Conversion to Sugarcane on Water Fluxes and Water Use Efficiency in the Southeastern US

The expansion of sugarcane (cane), a high-yielding perennial crop, will likely reshape the bioenergy landscape in the Southeastern US. However, its ecohydrological implications, particularly following conversion from grazed pastures, a dominant land use in the region, remain highly uncertain. We investigated the impact of cane expansion on evapotranspiration (ET) and its partitioning, and the mechanisms influencing both ET components and water use efficiency (WUE) across multiple scales and growth cycles in subtropical Florida. We combined eddy covariance, biometric measurements, and process-based stomatal conductance (g s ) models. ET was 1.7% lower in cane than in improved pasture (IMP) but exceeded that in semi-native pasture (SN) by 21%. Transpiration (T) followed a similar pattern, consistent with lower g s in cane relative to IMP. Cane had more conservative water use and greater sensitivity of g s to vapor pressure deficit (VPD) compared to IMP pasture, suggesting cane may be more tolerant of increasing atmospheric water demand. In contrast, SN showed lower g s and weaker stomatal sensitivity to VPD compared to cane, resulting in lower T. In cane, stomatal regulation and T varied across growth cycles, with stomata becoming less water conservative as stands matured, highlighting the importance of incorporating stand age-dependent stomatal regulation into hydrological models. Evaporation (E) was higher in cane than pastures (19%–26%), partially offsetting WUE gains. Cane exhibited higher intrinsic WUE (GPP/g s ; Gross Primary Productivity), ecosystem WUE (GPP/ET), and harvest WUE (harvest/ET) than both pasture types. Large-scale pasture-to-cane conversion could produce widely contrasting hydrological outcomes. The net regional impact will depend on the proportion of each pasture type converted and on cane's high g s sensitivity to VPD, which triggers tight stomatal regulation and conservative water use, both of which will become increasingly consequential under intensifying atmospheric water demand.

bioenergy↗
DOE OSTI2025

Data-model files associated with the manuscript "Modeling the Effects of Wetland Restoration on Coastal Hydrology: A Case Study of Elkhorn Slough Watershed, California"

This package contains the data, simulation setups, notebooks and figures used in “Modeling the Effects of Wetland Restoration on Coastal Hydrology: A Case Study of Elkhorn Slough Watershed, California” (Xu et al., 2025). In this study, we selected Elkhorn Slough, a tidal estuary, in California, to investigate the impact of wetland restoration and sea level rise on coastal hydrology using the process-based coastal hydrologic model, Advanced Terrestrial Simulator (ATS), informed by site-specific data. We designed a novel modeling workflow for incorporating wetland restoration features into land cover and soil properties for the model parameterization. The validation results demonstrate a strong agreement between modeled and observed data. We studied the characteristics of coastal watershed hydrology, then focused on the surface water dynamics at two wetland sites within Elkhorn Slough, a reference site and a restored site. Our simulation results indicate that the restored site successfully maintains surface elevation, resulting in reduced surface inundation. We also examined the impact of wetland restoration under expected sea level rise over the next few decades. The low-lying Yampah Marsh, the reference site, is likely to be inundated due to future sea level rise when highest tides arrive; while a higher percentage of Hester Marsh, the restored site, would retain marsh vegetation in coming decades, regardless of tidal conditions. Our study provides important information for examining the outcome of restoration practices that include surface elevation in tidal wetlands under climate changes.Several files can be found from this data package.1. README.md: This file describes the title, journal, co-authors, abstract, repository structure and model version.2. Simulation_Setups.zip: The file contains the model configuration files (XML format) for ATS. 3. Notebooks.zip: The file contains the Jupyter notebooks for generating the pre- and post-restoration meshes and the meshes of future scenarios. 4. Figures.zip: The file contains the figures used in the manuscript.5. Data.zip: The file contains the data used to drive the model simulations, including watershed and wetlands boundaries, mesh files and references to additional datasets (e.g., meteorological forcing, tidal dataset, DEMs, land cover, soil properties). Also, it contains water level observations at the restored wetland.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Evapotranspiration partitioning estimates from 8 methods from 47 NEON sites, 2019-2021

This dataset provides daily estimates of evapotranspiration (ET) and the transpiration-to-evapotranspiration ratio (T/ET) across 47 terrestrial National Ecological Observatory Network (NEON) sites spanning diverse environmental and biome conditions in the United States across three years of data (2019-2021). Daily ET is reported in both energy units (MJ m⁻² day⁻¹) and equivalent water depth (mm day⁻¹), assuming a constant latent heat of vaporization of 2.45 MJ/kg. The primary method uses a hybrid recurrent neural network–Penman–Monteith framework (RNN-PM), which integrates physically based surface energy balance constraints with data-driven learning to partition ET into transpiration and evaporation components. Model inputs include in situ meteorological observations (air temperature, vapor pressure deficit, wind speed, and radiation) combined with satellite-derived land surface temperature, leaf area index, and soil moisture. For benchmarking and uncertainty assessment, T/ET estimates from seven additional models are included: Priestley-Taylor Jet Propulsion Laboratory (PT-JPL), Penman-Monteith (P-M), Two-Source Energy Balance (TSEB), Support Vector Regression (SVR), and Categorical Boosting (CatBoost), among others—spanning empirical, machine-learning, and process-based approaches (see methods section or linked publication for detailed descriptions). Data Package Contents: The dataset a csv files containing daily ET and T/ET estimates for each site and model, along with associated metadata files these variables. Data can be accessed using common spreadsheet software (e.g., Microsoft Excel, LibreOffice) or programming environments such as R or Python. Together, these data support cross-site comparisons of ecosystem water use, evaluation of ET partitioning methods, and development of improved land–atmosphere exchange models.

EARTH SCIENCE > ATMOSPHERE↗
DOE OSTI2026

Global compilation of soil methane uptake measurements from 1984 to 2018

This data package contains a global compilation of soil methane uptake measurements collected from published field studies between 1989 and 2022. The dataset was developed to support machine learning (ML) estimation of the global terrestrial methane soil sink and includes monthly methane uptake rates, measurement dates, site coordinates, and associated ecosystem information from different ecosystems. Data were compiled from 164 peer-reviewed publications across approximately 260 study sites, resulting in ~12,000 monthly observations after quality control screening and removal of manipulated experimental treatments. The database was further processed to generate site-averaged methane uptake estimates for comparison between process-based (PB) and ML models.

earth science↗
DOE OSTI2025

Testing mechanisms of how mycorrhizal associations affect forest soil carbon and nitrogen cycling (Final Technical Report)

Trees are in a symbiotic partnership with mycorrhizal fungi in which they provide the fungi with carbon from photosynthesis and the fungi provide the trees with nutrients and water. In temperate forests, the vast majority of trees form symbioses with one of two types of mycorrhizal fungi—arbuscular mycorrhizal (AM) fungi or ectomycorrhizal (EcM) fungi. These fungi differ in their morphology, hyphal length, and nutrient acquisition strategies. Many studies have found systematic differences in soil organic matter and nitrogen availability between forest stands dominated by AM-associating trees versus EcM-associating trees. For instance, there is a larger proportion of organic matter that is mineral-associated, more available nitrogen, and lower soil carbon to nitrogen ratios in AM forest stands relative to EcM forests stands. However, the mechanisms driving these patterns are not known, which complicates our ability to model soil organic matter dynamics in forested ecosystems. The main objective of this research was to understand the degree to which the observed differences in soil C and N dynamics between AM and EcM dominated forests are driven by tree traits like litter decomposability and root exudation versus mycorrhizal fungal nutrient acquisition strategies. We investigated these mechanisms using observations and targeted experiments and incorporated this knowledge into a process-based soil organic matter model. The observational studies compared the importance of leaf litter decomposability versus fungal identity on soil organic matter processes. We found that often fungal identity and traits were more important drivers of soil organic matter patterns than leaf litter decomposability. We ran two novel experiments: 1) a growth chamber experiment across four EcM and four AM tree species using a 13 C-labeled atmosphere to trace seedling-derived C into hyphae, the rhizosphere, and soil; and 2) an in situ decomposition experiment of six different 13 C and 15 N labeled litters that ranged in decomposability incubated across a gradient of EcM dominance at three sites that capture important variation in climate, soils, and forest species composition. In the first experiment, we found no significant differences of seedling mycorrhizal association on soil carbon sequestration over a growing season, but we did find that mycorrhizal association affected rhizodeposition with EcM-associating seedlings depositing more carbon in response to increased nitrogen availability. The decomposition experiment is still ongoing, but thus far, we have found slower litter decomposition in only one of three EcM-dominated forests which suggests that differences between AM- and EcM-dominated forests depend on the environmental context and identity of the EcM fungi. Lastly, we explicitly incorporated mycorrhizal processes into the Carbon, Organisms, Rhizosphere, and Protection in the Soil Environment (CORPSE) model creating Myco-CORPSE. By including the different nutrient acquisition strategies of AM and EcM fungi, we explored the conditions under which EcM fungi can slow decomposition rates and lead to greater soil organic carbon accumulation compared to AM fungi. We found that the effect of EcM fungi was highly context dependent and that EcM fungi decreased decomposition in colder forests with recalcitrant litter inputs and when they produced oxidases and necromass-degrading enzymes. Our research highlights the importance of fungal nutrient acquisition in driving soil organic matter patterns and the need to move beyond the AM-EcM dichotomy to consider the identity and traits of the specific fungi participating in the symbiosis. Overall, this research has resulted in six, peer-reviewed published papers in journals such as Global Change Biology, Ecology (2), Soil Biology and Biochemistry, and Ecosystems (2). There are at least two more papers in progress on this research including one that was recently submitted to Global Change Biology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Interactions between land use, fires, and dust as drivers of global climate change (Final Technical Report)

This award to UC Irvine and Cornell University led to the publication of 18 papers, three of which are highly cited. According to ISI Web of Science, the body of work from this grant has been cited over 476 times by May 2025. Several additional publications remain in review. This grant contributed to several significant science advances, including an improved understanding of the influence of fire aerosols on global photosynthesis (Xu et al., 2021), dust-driven teleconnections between Africa and South America (Li et al., 2021), the role of fire aerosols in triggering phytoplankton blooms in the Arctic (Ardyna et al., 2022), and wildfire responses to heat waves (Li et al., in review). Several other studies are being written up for publication, and will acknowledge funding support. These efforts include an analysis in which the magnitude of tropical fire emissions from land use change is constrained by comparing E3SMv3 simulations with atmospheric observations. This work has revealed that carbon cycle model estimates of land use change may considerably overestimate the global tropical deforestation flux. The project also contributed to several technical advances, including a new process-based and scale-aware desert dust emission scheme for global climate models (Leung et al., 2023), an improved representation of dust and its influence on radiation in E3SM (Feng et al., 2022), an improved representation of the dust parameterization in the Community Earth System Model (Li et al., 2022), and an improved coupling of wildfires with atmospheric chemistry in E3SM v3.

58 GEOSCIENCES↗
DOE OSTI2025

Workflow for Process Automation of Soil Gas Results from an Automated Soil Gas-Sampling System for Application in Carbon Storage Projects

Conference presentation at Geoconvention, Calgary, Alberta, Canada, May 12–14, 2025. The Energy & Environmental Research Center (EERC) developed an automated workflow for processing soil gas measurements collected from the automated soil gas-sampling systems deployed across the project site. Raw soil gas measurements are collected from each station every 4 hours and automatically uploaded to a cloud database. The workflow begins by writing code to download the data to a workstation automatically, then the data are published to an online dashboard that visualizes the measurements in time-series plots and a process-based decision-making framework. This automated workflow accelerates the time from data acquisition to decision-making. It supports carbon storage project operators by preparing and delivering a live, standardized dataset for quick analysis and source attribution to provide assurance of containment and overall permit compliance.

02 PETROLEUM↗
DOE OSTI2026

Characterizing the impact of water uptake on light absorption by aerosol particles

Absorbing aerosols (AA) have an important impact on the global radiation budget. The composition and properties of AA can vary substantially throughout the atmosphere, depending on the particle source and the influence of chemical aging. Uncertainties associated with the radiative effects of AA remain substantial. A key contributor to this uncertainty is understanding the extent to which water uptake alters absorption by AA particles and how this depends on particle composition. We have used new and existing experimental tools to systematically characterize the relationship(s) between AA chemical and physical characteristics, relative humidity, and mixing of AA with other aerosol components through a combination of laboratory and field measurements. We have developed fundamental understanding through laboratory experiments that will enable interpretation of field observations at DOE ARM sites and facilitate process-based improvements in the simulation of absorption by carbonaceous aerosols in climate models. In the laboratory experiments we have considered a variety of different AA types, including fullerene soot (a surrogate for refractory black carbon, or BC) and nigrosine (a surrogate for partially soluble brown carbon, or BrC). By examining a range of AA types we will develop insight into how the chemical and physical properties of AA particles (e.g. whether they are refractory or soluble) impact the influence of water uptake on absorption. These AA particles will also be mixed—both internally and externally—with compounds having a wide range of hygroscopic properties to establish how the impact of water uptake on absorption will vary with photochemical processing. These laboratory observations have been compared with commonly used theoretical models, enabling development of empirical models that will facilitate improved representation of absorption by AA particles in regional and global climate models. Overall, our study has contributed to the mission of the Atmospheric System Research program by quantifying how interactions between aerosols and radiation depend on relative humidity. Through this, our work will improve understanding and model representation of aerosol processes as they affect the Earth’s radiation budget.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

High-frequency Data Integration for Landscape Model Calibration of Carbon Fluxes Across Diverse Tidal Marshes

Terrestrial Aquatic Interfaces (TAIs), and tidal wetlands in particular, store large amounts of carbon yet are not well represented in Earth System Models (ESMs). Predictions of carbon cycling and greenhouse gas (GHG) emissions in tidal wetlands are highly uncertain. Eddy covariance (EC) towers provide ecosystem-scale GHG flux data at a temporal resolution (every 30min) that is helpful for parameterizing and improving mechanistic realism in ESMs. We propose to use a network of eddy covariance towers and standardized ancillary data streams, along with mesocosm experiments and statistical analyses, across diverse tidal wetlands of North America to develop and improve biogeochemical modeling at the TAI. Our overarching objective is to improve understanding and process-based modeling of gross primary productivity (GPP) and CH4 emission responses, both non-linear and asynchronous, to stressors including plant inundation, disturbance, salinity and nitrogen loading.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Systems Analysis of Biomass and Coal Co-firing Power Plants with Deep Carbon Capture Toward Net-zero Emissions

Achieving a net-zero emission economy in the United States requires integrating diverse low-carbon and negative-emission technologies into the existing fossil fuel-dominant power fleet. Potential technologies from the low-carbon portfolio include renewable power, fossil power with carbon capture and storage (CCS), bioenergy with CCS (BECCS), and direct air capture (DAC). Renewable power is a clean energy source but has to pair with costly battery storage to provide dispatchable electricity. Fossil power with CCS offers dispatchable electricity yet still relies on DAC to offset residual emissions, even when deploying deep CCS with more than 90% CO2 capture. Coal-biomass co-firing with CCS, a subset of BECCS, is a reliable energy production technology that can be retrofitted from existing electricity generation units (EGUs). Power plant retrofit maximizes the use of the current U.S. coal power fleet without the need for large-scale deployment of new renewable power, battery storage, or DAC. Retrofitting coal-biomass co-firing with deep CCS in EGUs is a promising option, but not a universal solution. Biomass co-firing at a power plant introduces economic challenges and indirectly poses pressure on land and water resources. Meanwhile, retrofitting deep CCS affects plant efficiency and raises electricity generation costs. Overall, the technical feasibility and economic viability of plant retrofits vary across EGUs, as they are contingent upon the regional availability of biomass, unit-specific characteristics, site-specific fuel supply costs, and adjacent CO2 storage potential. Government incentives like 45Q can improve the retrofit viability, though the impact requires further quantification. A comprehensive analysis at the unit level is essential to address the question regarding the fate of the U.S. coal-fired electricity generation fleet toward the net-zero emission goal. This study conducts a systematic techno-economic-environmental assessment of EGUs to identify the viability of biomass co-firing and deep CCS retrofits in the U.S. coal-fired power fleet. Specifically, it characterizes the techno-economic performance of deep carbon capture, estimates life cycle greenhouse gas (GHG) emissions, and conducts a fleet-level assessment on retrofit viability. The key objectives are (1) to estimate the unit-specific performance and retrofitted cost under various biomass co-firing levels and CO2 capture rates; (2) to determine the possibility of reaching net-zero emission at the fleet level; (3) to quantify the cumulative capacities that are suitable for plant retrofits under current and future biomass supply scenarios; and (4) to improve the understanding of policy impacts on such retrofits to help the power sector’s transition to a net-zero economy. Techno-economic Model of Deep Carbon Capture. This study develops the performance and economic models for Monoethanolamine-based post-combustion CO2 capture at 95–99% capture rates. The process is simulated in Aspen Plus, analyzing the performance of carbon capture technology by varying the plant sizes, solvent lean loading, CO2 concentrations, and flue gas inlet temperature. Based on the key inputs and output parameters of CO2 capture, a reduced-order performance model of deep carbon capture is formulated. In addition, an engineering-economic model integrating the performance metrics is developed to estimate the capital as well as operation and maintenance (O&M) costs. Capital cost estimations follow the framework of the Integrated Environmental Control Model (IECM) and incorporate data regressions from three technical reports by IECM, the National Energy Technology Laboratory (NETL), and the National Renewable Energy Laboratory. The O&M cost estimation utilizes the actual inventory consumption rate and labor requirements. Both performance and cost models are embedded into IECM v13.0-beta, a fossil-fuel power plant modeling tool. Life Cycle Assessment of Power Plants. This study estimates the GHG emissions of power plants through life cycle assessment (LCA). The LCA scope includes fuel supply, combustion-based power generation, and CO2 transport and storage. The fuel-based life cycle module is designed following the framework of the NETL Unit Process Library and CO2U LCA Guidance Toolkit. The module is then incorporated into IECM v13.0-beta. The process-based LCA is applied to estimate the GHG emissions of coal and biomass supply, coal- and coal-biomass co-firing power plant operation, as well as CO2 pipeline transport and geographical sequestration. An uncertainty analysis is conducted to quantify the variability and uncertainty associated with the LCA using the Latin Hypercube Sampling (LHS) method. Fleet-level Assessment. This study evaluates the technical and economic feasibility of selected coal-fired EGUs, examines the role of tax credits in retrofit viability, and assesses the competitiveness of retrofitted units against other low-carbon options. Unit screening identifies EGUs for the study, focusing on new, efficient baseload units with air pollution controls. The power plant databases are then established to organize unit-specific information on performance and operating conditions from the relevant public databases. Biomass for co-firing retrofits is selected based on home and neighboring county availability, ensuring sustained operation with at least a 5% co-firing level. The CO2 storage site is determined by state-level storage potential, with ArcGIS Pro and NETL CO2 Saline Storage Cost Model used to identify the optimal balance between the nearest transport distances and affordable storage costs. The latest IECM v13.0-beta is then employed to configure and evaluate the eligible EGUs with or without the deployment of deep CCS and biomass co-firing. A supply curve is established to illustrate the cumulative installed capacity suitable for retrofits at different cost levels. A sensitivity analysis on tax credits for carbon sequestration is performed. Finally, a unit-level cost comparison is conducted among retrofitted plants, renewable power with battery storage, and abated fossil fuels with DAC. Expected Results. This study evaluates the technical, economic, and environmental metrics of each EGU across an array of CO2 capture rates and biomass co-firing level scenarios. Unit-level comparisons will identify critical factors influencing technical performance. The supply curves with and without tax incentives will provide insights into the impact of tax credits on biomass co-firing and CCS deployment. The cost comparisons with renewables and DAC-retrofit will assess the competitiveness of the retrofitted units. Life cycle emissions from each unit will be assessed to identify the scenarios under which net-zero emissions can be achieved. These analyses are expected to determine the total coal-fired capacity suitable for serving as a low-carbon energy source with or without tax incentives. The study results are novel in identifying optimal unit-specific strategies for producing carbon-neutral power, whether through retrofitting EGUs with deep CCS, biomass co-firing, DAC, or installing renewable power with battery. The findings will provide insight into nationwide efforts to ensure reliable, affordable, and low-carbon electricity. It also will inform investment decisions and policies in the deployment of deep carbon capture and negative emission technologies for a net-zero energy future.

Biomass Co-firing↗
DOE OSTI2026

Life Cycle Inventories and Data Gap Analysis for Rare Earth Elements: Neodymium and Dysprosium from Mining to Magnets

The United States demand for Neodymium-Iron-Boron (NdFeB) magnets, produced from rare earth elements (REEs) such as (Nd) and Dysprosium (Dy), far exceeds its nascent domestic production capacity, rendering it reliant on vulnerable global supply chains dominated by China. To guide research and development investments in securing U.S. REE supply, defensible benchmark metrics across environmental, economic, and social dimensions are needed. In this study, we built globally-representative, process-based cradle-to-cradle life cycle inventories for Nd and Dy in NdFeB magnets lifecycles, encompassing primary material acquisition, beneficiation, smelting and refining, metal processing, specialty alloy and chemical transformation, subcomponent manufacturing, consumer application (use phase) and end-of-life management. We carried out detailed literature review, and applied process engineering principles to build industry-representative upscaled life cycle inventories for both metals. We used these models to conduct bottom-up literature review and gap analysis on existing literature, compilation of data sources for each life cycle stage (and transformations where necessary), and a preliminary technoeconomic analysis (TEA)/life cycle costing analysis (LCCA). Findings from this work emphasize the need for metal specific, representative REE LCIs to establish robust benchmarks for advancing sustainable REE technologies and guiding R&D in REE supply chains.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Knowledge Graph for End-to-End Traceability of an Integrated Human-Earth System Model

Integrated human-Earth system models inform energy-water-land system dynamics and policies, yet their results are difficult to trace through input-data, model structure, scenario configurations, and solved outputs. Because this information is siloed across disconnected artifacts, process-based IAMs have historically lacked a unified, queryable representation. Such lack of traceability prevents researchers from systematically isolating the multi-sector drivers of complex outcomes (such as tracing water-scarcity results back to distant energy-system dynamics) or conducting holistic uncertainty attribution across hundreds of interacting parameters. To address this concern, our work documents the software engineering process of a knowledge graph that unifies these four layers for the Global Change Analysis Model (GCAM-USA_Reference scenario, GCAM v9.1). The graph was built as a relational property graph in DuckDB from the run’s own artifacts: the input-preparation dependency map (gcamdata chunk map), the model’s XML input files, the run configuration, and the results database (BaseX), successfully mapping the model’s declared structure. The resulting graph comprises 204,321 nodes and 1,687,814 edges across 16 node types and 15 edge types, with approximately 16.3 million time-series values stored separately to maintain structural efficiency. To ensure representation fidelity, every edge carries an epistemic-status annotation recording the warrant for the relationship (structural, provenance, dependency, or model-derived), and a machine-readable provenance ledger classifying the origin of every schema element. Evaluation against a fixed five-benchmark suite with locked baselines reports zero structural orphans, zero dangling edge endpoints, and 100% of output-producing technologies traceable to raw input files. Two interactive interfaces present the graph, including a serverless browser application built on DuckDB-Wasm. By establishing the first end-to-end provenance framework for an IAM, this work enables researchers and scientists to systematically audit complex policy scenarios, debug model structures, and trace policy-relevant outputs to their data origins in real time.

Artifical Intelligence↗
DOE OSTI2025

Hydrological connectivity: a review and emerging strategies for integrating measurement, modeling, and management

This review synthesizes methods for measuring, modeling, and managing hydrologic connectivity, offering pathways to improve practices and address environmental challenges (e.g., climate change) and sustainability. As a key driver of water movement and nutrient cycling, hydrologic connectivity influences flood mitigation, water quality regulation, and biodiversity conservation. However, traditional field-based methods (e.g., dye tracing), indirect measurements (e.g., runoff analysis), and remote sensing techniques (e.g., InSAR) often struggle to capture the complexity of catchment-scale interactions. Similarly, modeling approaches—including process-based and percolation theory-based models, graph theory, and entropy-based metrics—face limitations in fully representing these interconnected processes. Both modeling and measurement techniques are constrained by inadequate spatial and temporal coverage, high data demands, computational complexity, and difficulties in representing subsurface connectivity. Subsequently, we critique current management practices that prioritize isolated variables (e.g., streamflow, sediment transport) over system-wide strategies and emphasize the need for adaptive, connectivity-based approaches in water resource planning and restoration. Moving forward, we highlight the importance of interdisciplinary collaboration, technological innovations (e.g., AI-driven modeling, real-time monitoring), and integrated frameworks to improve connectivity measurement, modeling, and adaptive management to restore fragmented hydrologic networks. This integrated approach sets the stage for transformative water resource management, fostering proactive policy development and stakeholder engagement.

Dwivedi, Dipankar↗
DOE OSTI2025

Air temperature and precipitation constraining the modelled wetland methane emissions in a boreal region in northern Europe

Wetland methane responses to temperature and precipitation are studied in a boreal wetland-rich region in northern Europe using ecosystem process models. Six ecosystem models (JSBACH-HIMMELI, LPX-Bern, LPJ-GUESS, JULES, CLM4.5, and CLM5) are compared to multi-model means of ecosystem models and atmospheric inversions from the Global Carbon Project and upscaled eddy covariance flux results for their temperature and precipitation responses and seasonal cycles of the regional fluxes. Two models with contrasting response patterns, LPX-Bern and JSBACH-HIMMELI, are used as priors in atmospheric inversions with Carbon Tracker Europe–CH4 (CTE-CH4) in order to find out how the assimilation of atmospheric concentration data changes the flux estimates and how this alters the interpretation of the flux responses to temperature and precipitation. Inversion moves wetland emissions of both models towards co-limitation by temperature and precipitation. Between 2000 and 2018, periods of high temperature and/or high precipitation often resulted in increased emissions. However, the dry summer of 2018 did not result in increased emissions despite the high temperatures. The process models show strong temperature and strong precipitation responses for the region (51 %–91 % of the variance explained by both). The month with the highest emissions varies from May to September among the models. However, multi-model means, inversions, and upscaled eddy covariance flux observations agree on the month of maximum emissions and are co-limited by temperature and precipitation. The setup of different emission components (peatland emissions, mineral land fluxes) has an important role in building up the response patterns. Considering the significant differences among the models, it is essential to pay more attention to the regional representation of wet and dry mineral soils and periodic flooding which contribute to the seasonality and magnitude of methane fluxes. The realistic representation of temperature dependence of the peat soil fluxes is also important. Furthermore, it is important to use process-based descriptions for both mineral and peat soil fluxes to simulate the flux responses to climate drivers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Machine-learning-based estimates of global natural vegetated wetland methane emissions (2000–2025)

Wetlands are the largest natural source of atmospheric methane (CH 4 ), yet comprehensive global budgets are typically delayed by years, preventing a timely understanding of CH 4 sources, sinks, and trends. To reduce this delay, we present a model emulator-driven framework and accompanying workflow that enable timely, continuous emission updates using a machine-learning emulator to reconstruct spatially explicit monthly emission fields at 1° × 1° resolution. We apply this framework to a global dataset of natural vegetated wetland CH 4 emissions to extend the most recent Global Methane Budget (GMB; Saunois et al., 2025) record that covers the 2000–2020 emissions through 2025. In the test data (∼ 30 % of the total dataset), the emulator achieved a global R 2 of 0.65 ± 0.003 (mean ± 95 % CI, hereafter) and an RMSE of 5.49 ± 0.12×10 -3 Tg CH 4 yr −1 . The emulator is trained on 35 GMB model estimates, including 22 process-based models and 13 atmospheric inversions, paired with 10 ensemble realizations of 11 gridded climate predictor variables from atmospheric reanalyses. Our results show that the global mean predicted wetland CH 4 emissions for 2021–2025 (157.8 ± 2.4 Tg CH 4 yr −1 ) are not significantly higher (∼ 0.05 Tg CH 4 yr −1 ) than the 2000–2020 baseline. However, this stability masks a significant hemispheric redistribution of emissions. We detect an increase in Northern Hemisphere (NH) emissions in 2021–2025, with mid- and high-latitudes increasing by 0.76 ± 0.07 and 0.35 ± 0.03 Tg CH 4 yr −1 , respectively, while the tropics and Southern Hemisphere (SH) extratropics show offsetting negative trends (−0.95 ± 0.19 and -0.11 ± 0.02 Tg CH 4 yr −1 , respectively). The predicted emissions are able to capture the low emissions in 2023 in South America linked to El Niño-related drought, as reported by recent studies (Ciais et al., 2026; Quinn et al., 2025). Furthermore, we identify a distinct seasonal amplification of global emission trends that peaks in late boreal summer. This new modeled dataset and operational framework bridge the gap between the latest updated budgets and low-latency monitoring, providing a scalable capacity to frequently update global emission estimates and critical early warnings of regional wetland feedback loops. The data are publicly available at https://doi.org/10.5281/zenodo.18870108 (Li et al., 2026).

Li, Mengze [National University of Singapore (Sing↗
DOE OSTI2025

Assessing the climate impact of an improved volcanic sulfate aerosol representation in E3SM

Accurately simulating historical surface temperature variations is essential for evaluating climate models, yet many struggle to reproduce the mid-20th-century temperature trends associated with significant volcanic eruptions. This study examines the impact of volcanic sulfate aerosol representation on these biases using the Energy Exascale Earth System Model (E3SM). The standard CMIP6 protocol prescribes volcanic forcing through radiative perturbations, omitting volcanic aerosol–cloud interactions (VACIs). Here, we implement an emission-based approach with an updated volcanic eruption inventory that directly incorporates volcanic sulfur dioxide (SO 2 ) emissions, enabling a more process-based representation of volcanic forcing. This approach leads to improved surface temperature variability and a modest reduction in cold biases between 1940 and 1980 compared to the CMIP6 setup. Additionally, we assess cloud property responses to a more realistic volcanic sulfate aerosol representation, which weakens cloud-induced cooling during periods of lower volcanic activity. However, despite these refinements, a significant temperature cold bias remains, indicating that further improvements in atmospheric chemistry, aerosol microphysics, cloud processes, and model parameterizations are needed to fully resolve this issue in E3SM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Rapid Evaluation Framework for the CMIP7 Assessment Fast Track

As Earth system models (ESMs) grow in complexity and in volume of output data, there is an increasing need for rapid, comprehensive evaluation of their scientific performance. The upcoming Assessment Fast Track for the Seventh Phase of the Coupled Model Intercomparison Project (CMIP7) will require expeditious response for model analyses designed to inform and drive integrated Earth system assessments. To meet this challenge, the Rapid Evaluation Framework (REF), a community-driven platform for benchmarking and performance assessment of ESMs, was designed and developed. The initial implementation of the REF, constructed to meet the near-term needs of the CMIP7 Assessment Fast Track, builds upon four disparate community evaluation and benchmarking tools that are coupled together using the Coordinated Model Evaluation Capabilities (CMEC) framework. The REF runs within a containerized workflow for portability and reproducibility and is aimed at generating and organizing diagnostics covering a variety of model variables. The REF leverages well documented observational datasets to provide assessments of model fidelity across a collection of diagnostics. All diagnostics were identified and selected with community involvement and consultation. Operational integration with the Earth System Grid Federation (ESGF) will permit automated execution of the REF for selected diagnostics as soon as model output data are published on ESGF by the originating modeling centers. The REF is designed to be portable across a range of current computational platforms to facilitate use by modeling centers for assessing the evolution of model versions or gauging the relative performance of CMIP simulations before being published on ESGF. When integrated into production simulation workflows, results from the REF provide immediate quantitative feedback that allows model developers and scientists to quickly identify model biases and performance issues. After the REF is released to the community, its subsequent development and support will be prioritized by an international consortium of scientists and engineers, enabling a broader impact across Earth science disciplines. For instance, the REF will facilitate improvements to models and will enhance confidence in model projections through process-based selection of models based on their performance with respect to observations. Production of reproducible diagnostics and community-based assessments are key features of the REF. Furthermore, providing interoperability with existing evaluation packages assures that contributions from previous community efforts will be available for use in future model intercomparison projects.

Hoffman, Forrest [ORNL] (ORCID:0000000158024134)↗
DOE OSTI2025

Transfer learning of neural surrogates on multifidelity groundwater simulations

Multifidelity data used in the paper published in Advances in Water Resources 206 (2025) 105140, https://doi.org/10.1016/j.advwatres.2025.105140 The code used to process the data is openly available on GitHub at https://github.com/Model-Reduction-and-UQ-Group/Transfer_Learning_K_reconstruction Computationally inexpensive surrogates of process-based models, such as deep neural networks, enable ensemble-based computations used in risk assessment, data assimilation, etc. However, generation of large datasets required to train a neural network can be as expensive as the ensemble simulations themselves. We ameliorate this challenge by using data from multifidelity (MF) groundwater simulations and transfer learning (TL) to reduce data generation costs while maintaining model accuracy. As a computational example, we train a deep convolutional neural network (CNN) to reconstruct permeability fields from saturation maps derived from a multiphase flow model. Starting with very low- and low-fidelity data generated on increasingly coarse meshes, we pretrain the CNN, followed by output-layer training and fine-tuning using only a limited number of high-fidelity samples. We demonstrate the surrogate’s robustness when interpreting low-quality inputs—such as interpolated maps or data affected by noise—which has strong implications for the applicability in practical hydrogeological scenarios. This multilevel MF-TL strategy achieves a favorable trade-off between computational efficiency and predictive accuracy, significantly outperforming high-fidelity-only approaches under the same computational budget.

Chiofalo, Alessia [University of Bologna] (ORCID:0↗