Search NASA⌕ Search

SEARCH · Search NASA

Results for “Production rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Comparison of photon-photon and photon-magnetic field pair production rates

Neutron stars were proposed as the site of gamma-ray burst activity and the copious supply of MeV photons admits the possibility of electron-positron pair production. If the neutron star magnetic field is sufficiently intense (10 to the 12th power G), both photon-photon (2 gamma) and photon-magnetic field (gamma) pair production should be important mechanisms. Rates for the two processes were calculated using a Maxwellian distribution for the photons. The ratio of 1 gamma to 2 gamma pair production rates was obtained as a function of photon temperature and magnetic field strength.

Burns, M. L.↗

NPP ATMS Snowfall Rate Product

Passive microwave measurements at certain high frequencies are sensitive to the scattering effect of snow particles and can be utilized to retrieve snowfall properties. Some of the microwave sensors with snowfall sensitive channels are Advanced Microwave Sounding Unit (AMSU), Microwave Humidity Sounder (MHS) and Advance Technology Microwave Sounder (ATMS). ATMS is the follow‐on sensor to AMSU and MHS. Currently, an AMSU and MHS based land snowfall rate (SFR) product is running operationally at NOAA/NESDIS. Based on the AMSU/MHS SFR, an ATMS SFR algorithm has been developed recently. The algorithm performs retrieval in three steps: snowfall detection, retrieval of cloud properties, and estimation of snow particle terminal velocity and snowfall rate. The snowfall detection component utilizes principal component analysis and a logistic regression model. The model employs a combination of temperature and water vapor sounding channels to detect the scattering signal from falling snow and derive the probability of snowfall (Kongoli et al., 2015). In addition, a set of NWP model based filters is also employed to improve the accuracy of snowfall detection. Cloud properties are retrieved using an inversion method with an iteration algorithm and a two‐stream radiative transfer model (Yan et al., 2008). A method developed by Heymsfield and Westbrook (2010) is adopted to calculate snow particle terminal velocity. Finally, snowfall rate is computed by numerically solving a complex integral. NCEP CMORPH analysis has shown that integration of ATMS SFR has improved the performance of CMORPH‐Snow. The ATMS SFR product is also being assessed at several NWS Weather Forecast Offices for its usefulness in weather forecast.

Forecasting↗

Pair production rates in mildly relativistic, magnetized plasmas

Electron-positron pairs may be produced by either one or two photons in the presence of a strong magnetic field. In magnetized plasmas with temperatures kT approximately sq mc, both of these processes may be important and could be competitive. The rates of one-photon and two-photon pair production by photons with Maxwellian, thermal bremsstrahlung, thermal synchrotron and power law spectra are calculated as a function of temperature or power law index and field strength. This allows a comparison of the two rates and a determination of the conditions under which each process may be a significant source of pairs in astrophysical plasmas. It is found that for photon densities n(gamma) or = 10 to the 25th power/cu cm and magnetic field strengths B or = 10 to the 12th power G, one-photon pair production dominates at kT approximately sq mc for a Maxwellian, at kT approximately 2 sq mc for a thermal bremsstrahlung spectrum, at all temperatures for a thermal synchrotron spectrum, and for power law spectra with indices s approximately 4.

Burns, M. L.↗

Pair production rates in mildly relativistic magnetized plasmas

Electron-positron pairs may be produced by either one or two photons in the presence of a strong magnetic field. In magnetized plasmas with temperatures kT approximately sq mc, both of these processes may be important and could be competitive. The rates of one-photon and two-photon pair production by photons with Maxwellian, thermal bremsstrahlung, thermal synchrotron and power law spectra are calculated as a function of temperature or power law index and field strength. This allows a comparison of the two rates and a determination of the conditions under which each process may be a significant source of pairs in astrophysical plasmas. It is found that for photon densities n(gamma) or = 10 to the 25th power/cu cm and magnetic field strengths B or = 10 to the 12th power G, one-photon pair production dominates at kT approximately sq mc for a Maxwellian, at kT approximately 2 sq mc for a thermal bremsstrahlung spectrum, at all temperatures for a thermal synchrotron spectrum, and for power law spectra with indices s approximately 4.

Burns, M. L.↗

The production rate of C/+/ from the photoionization of CO and CO2

The dissociative photoionization cross sections for the production of C(+) ions are presented for the spectral region from the dissociative ionization threshold to 90 A. The cross sections are considerably larger than previously published data and should therefore influence the calculations of the C(+) concentrations in the Mars and Venus ionospheres. It is suggested that the released energy in the C(+) fragment ion could reduce the loss rate of the ions in collisional processes, thereby accounting for the apparent discrepancies between the observed and calculated C(+) ion density in the Venus ionosphere.

Samson, J. A. R.↗

Cosmic ray track production rates in lunar materials

A particularly favorable rock from the Apollo 16 mission (68815) has been used to derive an 'empirical track production energy spectrum' suitable for calculating track exposure ages from galactic cosmic rays in lunar materials. The spectrum is a long term average for the last 2m.y. and is independent of assumptions about the detailed nature of track registration in lunar minerals. The spectrum is close to that previously estimated from measurements of contemporary cosmic rays and does not support the recent suggestion that track exposure ages should be revised upwards.

Walker, R.↗

An estimate of the NO(x) production rate in electrified clouds based on NO observations from the GTE/CITE 1 fall 1983 field operation

During the NASA GTE/CITE 1 fall 1983 airborne field operation the NASA Convair 990 penetrated the anvils of two active cumulonimbus clouds. While NO levels outside the anvils averaged about 20 parts per trillion per volume (pptv), the average NO inside the anvils was about 440 pptv. Extrapolation of this observation along with data on the amount of air typically advected out of cumulonimbus clouds and the total number of thunderclouds occurring over the globe at any moment, implies a rate of nitrogen fixation in electrified clouds of about 7 x 10 to the 6th trillion/yr. Although the data base used to make this estimate is quite limited, the approach differs from that used in previous studies of the global production of nitrogen oxides by lightning, and thus represents an independent assessment of the role of electrified clouds in the atmospheric nitrogen oxide budget.

Chameides, W. L.↗

Ca-41 in iron falls, Grant and Estherville - Production rates and related exposure age calculations

Results are presented of the first phase of a Ca-41 cosmogenic studies program aimed at establishing baseline concentrations and trends in selected meteorites and the use of Ca-41 in estimating exposure ages and preatmospheric meteorite radii. The average Ca-41 saturation activity recorded in four small iron falls is 24 +/-1 dpm/kg. This finding, together with measurements at the center and surface of the large iron Grant, indicates that production of Ca-41 from spallation on iron is weakly dependent on shielding to depths as large as 250 g/sq cm. The (K-41)-Ca-41 exposure age of Grant is estimated at 330 +/-50 My, and an upper limit to its terrestrial age of 43 +/-15 ky. A comparison of the Ca-41 contents of stony and metallic material separated from the mesosiderite Estherville identifies low-energy neutron capture on native Ca as a second important channel of production. It is found that the Ca-41 signal in the stone phase from three meteorites correlates with their size, and that the inferred low-energy neutron fluxes vary by a factor of at least 20.

Fink, D.↗

P/Halley - Effects of time-dependent production rates on spatial emission profiles

Spatial profiles of C2, CN, NH2, and O(D-1) in Comet P/Halley taken on 1986 March 1.54 and 2.55 and April 14.32 and 15.30 clearly show the effect of the 7 day periodic variation seen in photometric observations. With a time-dependent model based upon the light curve and employing standard scale lengths for each species reduced to the appropriate heliocentric distance, we are able to reproduce the highly variable profiles for all species. We computed the phase lag and amplitude correction between the actual gas production at the nucleus and the temporal/spatial filter imposed by the finite aperture photometry. For early March we find a phase lag and amplitude correction of 12 hr and -9 percent, respectively, whereas in mid-April the values are 6 hr and -27 percent. The same phase lag and amplitude correction work equally well for all four species despite their wide variation in photochemical lifetimes for production and decay. The same model integrated over circular apertures is able to reproduce the entire published March and April photometric light curves for C2. Our results require the use of the 7.60 day period for the March data as opposed to the 7.37 day period that is relevant for the April data, in agreement with the published analysis of the photometric data. Our results will help to reconcile the placement of active areas on the surface of Halley's comet with various remote observations and spacecraft images of the nucleus.

Combi, Michael R.↗

Quantifying the Evolution of Molecular Production Rates of Comet 21P/Giacobini–Zinner with iSHELL/NASA-IRTF

This paper presents results from our molecular characterization of comet 21P/Giacobini-Zinner during its 2018 apparition. We followed the comet during four observing runs, for a total of 8 nights. The high-resolution spectra of 21P were acquired using iSHELL - the near-IR high resolution immersion echelle spectrograph on NASA/IRTF (Mauna Kea, Hawaii). We detected many cometary emission lines across four customized iSHELL settings in the (2.9 – 5.2) μm range. CO abundances relative to water displayed a relatively constant behavior during the observing campaign, suggesting a possible correlation between the outgassing of water and CO. While CO mixing ratios in 21P are consistent with the reference median value for Jupiter Family comets (JFCs), ethane was depleted relative to the reference median value for JFCs, excepting one observing run (8th and 9th Aug) in which ethane appeared overabundant. We consider several possible causes: an ethane outburst, decreasing outgassing of water, or a seasonal effect owing to nucleus rotation. In the pre-perihelion runs, methanol was overabundant compared with the reference median value for JFCs, however it decreased steadily to a depleted value during 21P’s post-perihelion phase, suggesting a possible seasonal effect. We report 3-s upper limits for acetylene, formaldehyde, ammonia and methane. The ratios of our measured 3-s upper limits for acetylene and detections of hydrogen cyanide are consistent with the depletion of C2 relative to CN in 21P observed at optical wavelengths. This result confirms that 21P is depleted in the carbon chain primary volatile responsible for C2 production.

Faggi S.↗

Variability of the Al-26 production rate in ordinary chondrites

Fifteen ordinary chondrites for which unusually high spallogenic Ne-22/Ne-21 or He-3/Ne-21 ratios had been reported and one meteorite with marked shock characteristics were selected in order to investigate the relations between Ne-22/Ne-21 ratios, Al-26 contents and depth. We report Al-26 and K contents of 13 samples from 11 of these and noble gas contents of 30 samples from all of these stones.

Herzog, G. F.↗

Large impact basins on Mercury and relative crater production rates

Mariner 10 revealed evidence for 40 impact basins having diameters greater than or equal to 200 km on the portion of Mercury imaged at sufficient resolution. A log (cumulative number/unit area) vs. log (diameter) plot for the mercurian basins has a least squares slope of -2. Mercury has (in cumulative number/unit area) only 37 percent as many basins as does the Moon over the entire range of diameters greater than or equal to 300 km. If both the Moon and Mercury have had similar preservation times for craters and if common populations of impactors are involved, then Mars crossers may have been a dominant contribution to the basin forming objects.

Frey, H.↗

Large impact basins on Mercury and relative crater production rates

A search for impact basins on Mercury having diameters greater than 200 km revealed evidence for 40 such structures on the 47% of Mercury mapped at sufficient resolution by Mariner 10. This is similar to the number (35) found by Schaber et al. (1977), although there is disagreement in the details of both diameters (for basins observed by them and by the authors) and in the existence of individual basins. The differences are described in detail. A log (cumulative number/unit area)-log (diameter) plot for mercurian basins has a least squares slope of -2; basins show somewhat less scatter about this line than do the Schaber et al. basins. Mercury has (in cumulative number/unit area) only 37% as many basins as does the moon over the entire range of diameters greater than 300 km. If both the moon and Mercury have had similar preservation times for craters and if common populations of impactors are involved, then Mars-crossers may have been a dominant contribution to the basin-forming objects.

Frey, H.↗

Equivalent-cone calculation of nitric oxide production rate during Space Shuttle re-entry

The amount of nitric oxide likely to be produced in the shock layer around a Space Shuttle orbiter vehicle during its reentry is calculated at one point on the trajectory. An equivalent-cone is defined as one that produces the same amount of nitric oxide as the orbiter. The amounts of nitric oxide produced by the cone are calculated at points along the trajectory to determine their total and altitudinal distribution. The results show that about 14 tonne nitric oxide is produced at each entry, the peak occurring at 68 km altitude.

Park, C.↗