Search NASA⌕ Search

SEARCH · Search NASA

Results for “Proxy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Modeling Quiet Solar Luminosity Variability from TSI Satellite Measurements and Proxy Models during 1980-2018

A continuous record of direct total solar irradiance (TSI) observations began with a series of satellite experiments in 1978. This record requires comparisons of overlapping satellite observations with adequate relative precisions to provide useful long term TSI trend information. Herein we briefly review the active cavity radiometer irradiance monitor physikalisch-meteorologisches observatorium davos (ACRIM-PMOD) TSI composite controversy regarding how the total solar irradiance (TSI) has evolved since 1978 and about whether TSI significantly increased or slightly decreased from 1980 to 2000. The main question is whether TSI increased or decreased during the so-called ACRIM-gap period from 1989 to 1992. There is significant discrepancy between TSI proxy models and observations before and after the gap, which requires a careful revisit of the data analysis and modeling performed during the ACRIM-gap period. In this study, we use three recently proposed TSI proxy models that do not present any TSI increase during the ACRIM-gap, and show that they agree with the TSI data only from 1996 to 2016. However, these same models significantly diverge from the observations from 1981 and 1996. Thus, the scaling errors must be different between the two periods, which suggests errors in these models. By adjusting the TSI proxy models to agree with the data patterns before and after the ACRIM-gap, we found that these models miss a slowly varying TSI component. The adjusted models suggest that the quiet solar luminosity increased from the 1986 to the 1996 TSI minimum by about 0.45 W/m2 reaching a peak near 2000 and decreased by about 0.15 W/m2 from the 1996 to the 2008 TSI cycle minimum. This pattern is found to be compatible with the ACRIM TSI composite and confirms the ACRIM TSI increasing trend from 1980 to 2000, followed by a long-term decreasing trend since.

total solar irradiance↗

A Simple Computational Proxy for Screening Magnetocaloric Compounds

Alternating cycles of isothermal magnetization and adiabatic demagnetization applied to a magnetocaloric material can drive refrigeration in very much the same manner as cycles of gas compression and expansion. The material property of interest in finding candidate magnetocaloric materials is ΔS M , their gravimetric entropy change upon application of a magnetic field under isothermal conditions. There is, however, no general method for screening materials for such an entropy change without actually performing the relevant, time- and effort-intensive magnetic measurements. Here we propose a simple computational proxy based on performing nonmagnetic and magnetic density functional theory calculations on magnetic materials. This proxy, which we term the magnetic deformation Σ M , is a measure of how much the unit cell deforms comparing with the relaxed structures with and without the inclusion of spin polarization. Σ M appears to correlate very well with experimentally measured magnetic entropy change values. Here, the proxy has been tested against 33 ferromagnetic materials with known ΔS M , including nine materials newly measured for this study. It has then been used to screen 134 ferromagnetic materials for which the magnetic entropy has not yet been reported, identifying 30 compounds as being promising for further study. As a demonstration of the effectiveness of our approach, we have prepared one of these compounds and measured its isothermal entropy change. MnCoP, with a T C of 575 K, shows a maximal ΔS M of –6.0 J kg –1 K –1 for an H = 5 T applied field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predictive Proxies of Present and Future Lightning in a Superparameterized Model

Abstract A superparameterized climate model is used to assess the global performance of several previously proposed proxies for lightning. In particular, predictors incorporating hydrometeor (ice, graupel) profiles and convective vertical velocities are compared to observations, then used to estimate changes in flash rates with global warming. The choice of microphysics parameterization is also investigated, with all predictors showing higher correlations with Lightning Imaging Sensor/Optical Transient Detector observations when using a 2‐moment scheme compared to a 1‐moment representation. All proxies generally agree in their response to warming over tropical land, with notable decreases in Africa, the Middle East, and northern South America, but disagree over oceans and the midlatitudes. The product of convective available potential energy and precipitation predicts increases over these latter areas, as do the 2‐moment ice‐based proxies, while those of the 1‐moment model tend to show decreases, highlighting the importance of cloud microphysics when using climate models to simulate lightning.

54 ENVIRONMENTAL SCIENCES↗

Transitioning GlideinWMS, a multi domain distributed workload manager, from GSI proxies to tokens and other granular credentials

GlideinWMS is a distributed workload manager that has been used in production for many years to provision resources for experiments like CERN’s CMS, many Neutrino experiments, and the OSG. Its security model was based mainly on GSI (Grid Security Infrastructure), using X.509 certificate proxies and VOMS (Virtual Organization Membership Service) extensions. Even when other credentials, like SSH keys, were used to authenticate with resources, proxies were also added all the time, to establish the identity of the requestor and the associated memberships or privileges. This single credential was used for everything and was, often implicitly, forwarded wherever needed. The addition of identity and access tokens and the phase-out of GSI forced us to reconsider the security model of GlideinWMS, to handle multiple credentials which can differ in type, technology, and functionality. Both identity tokens and access tokens are supported. GSI proxies even if no more mandatory, are still used, together with various JWT (JSON Web Token) based tokens and other certificates. The functionality of the credentials, defined by issuer, audience, and scope, also differ: a credential can allow access to a computing resource, or can protect the GlideinWMS framework from tampering, or can grant read or write access to storage, can provide an identity for accounting or auditing, or can provide a combination of any the formers. Furthermore, the tools in use do not include automatic forwarding and renewal of the new credentials so credential lifetime and renewal requirements became part of the discussion as well. In this paper, we will present how GlideinWMS was able to change its design and code to respond to all these changes.

97 MATHEMATICS AND COMPUTING↗

A flexible and differentiable coil proxy for stellarator equilibrium optimization

Balancing plasma performance and coil cost is a significant challenge when designing a stellarator power plant. Most current stellarator designs are produced through two-stage optimization: stage-1 for the equilibrium and stage-2 for a coil design that reproduces its magnetic configuration. Because few proxies connect both stages, two-stage optimization can produce plasmas that have high-quality physical properties but overly complex coils. In recent years, single-stage optimization has increasingly been used to optimize the plasma and coils simultaneously in order to improve the plasma–coil balance. However, all existing single-stage tools are specialized for filament coils, cannot model coil systems containing permanent magnets or dipole arrays, and continue to be challenged by numerical problems. The quasi-single-stage optimization finds a middle ground by integrating a coil optimization subproblem into stage-1 optimization. We present a flexible, differentiable coil complexity proxy based on the newly developed QUADCOIL coil optimization code. QUADCOIL is fast and can target realistic coil metrics and constraints that are unavailable to codes with comparable speed. We demonstrate the effectiveness and flexibility of the QUADCOIL proxy by presenting two QSS optimization studies. The first study produces a permanent magnet solution for the MUSE stellarator with 34% fewer magnets than previous solutions. The second study produces a coil solution for the ARIES-CS stellarator with 30% reductions in both peak and root-mean-square force.

Fu, Lanke [Princeton Plasma Physics Laboratory (PP↗

POLAR NETWORK INDEX AS A MAGNETIC PROXY FOR THE SOLAR CYCLE STUDIES

The Sun has a polar magnetic field which oscillates with the 11 yr sunspot cycle. This polar magnetic field is an important component of the dynamo process which operates in the solar convection zone and produces the sunspot cycle. We have direct systematic measurements of the Sun's polar magnetic field only from about the mid-1970s. There are, however, indirect proxies which give us information about this field at earlier times. The Ca-K spectroheliograms taken at the Kodaikanal Solar Observatory during 1904-2007 have now been digitized with 4k × 4k CCD and have higher resolution (∼0.86 arcsec) than the other available historical data sets. From these Ca-K spectroheliograms, we have developed a completely new proxy (polar network index, hereafter PNI) for the Sun's polar magnetic field. We calculate PNI from the digitized images using an automated algorithm and calibrate our measured PNI against the polar field as measured by the Wilcox Solar Observatory for the period 1976-1990. This calibration allows us to estimate the polar fields for the earlier period up to 1904. The dynamo calculations performed with this proxy as input data reproduce reasonably well the Sun's magnetic behavior for the past century.

79 ASTRONOMY AND ASTROPHYSICS↗

Stellar mass as a galaxy cluster mass proxy: application to the Dark Energy Survey redMaPPer clusters

Abstract We introduce a galaxy cluster mass observable, μ⋆, based on the stellar masses of cluster members, and we present results for the Dark Energy Survey (DES) Year 1 (Y1) observations. Stellar masses are computed using a Bayesian model averaging method, and are validated for DES data using simulations and COSMOS data. We show that μ⋆ works as a promising mass proxy by comparing our predictions to X-ray measurements. We measure the X-ray temperature–μ⋆ relation for a total of 129 clusters matched between the wide-field DES Y1 redMaPPer catalogue and Chandra and XMM archival observations, spanning the redshift range 0.1 < $z$ < 0.7. For a scaling relation that is linear in logarithmic space, we find a slope of α = 0.488 ± 0.043 and a scatter in the X-ray temperature at fixed μ⋆ of $\sigma _{{\rm ln} T_\mathrm{ X}|\mu _\star }= 0.266^{+0.019}_{-0.020}$ for the joint sample. By using the halo mass scaling relations of the X-ray temperature from the Weighing the Giants program, we further derive the μ⋆-conditioned scatter in mass, finding $\sigma _{{\rm ln} M|\mu _\star }= 0.26^{+ 0.15}_{- 0.10}$. These results are competitive with well-established cluster mass proxies used for cosmological analyses, showing that μ⋆ can be used as a reliable and physically motivated mass proxy to derive cosmological constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

Centre-excised X-ray luminosity as an efficient mass proxy for future galaxy cluster surveys

The cosmological constraining power of modern galaxy cluster catalogues can be improved by obtaining low-scatter mass proxy measurements for even a small fraction of sources. In the context of large upcoming surveys that will reveal the cluster population down to the group scale and out to high redshifts, efficient strategies for obtaining such mass proxies will be valuable. Here in this work, we use high-quality weak-lensing and X-ray mass estimates for massive clusters in current X-ray-selected catalogues to revisit the scaling relations of the projected, centre-excised X-ray luminosity (L ce ), which previous work suggests correlates tightly with total mass. Our data confirm that this is the case with Lce having an intrinsic scatter at fixed mass comparable to that of gas mass, temperature or YX. Compared to the other proxies, however, Lce is less susceptible to systematic uncertainties due to background modelling, and can be measured precisely with shorter exposures. This opens up the possibility of using L ce to estimate masses for large numbers of clusters discovered by new X-ray surveys (e.g. eROSITA) directly from the survey data, as well as for clusters discovered at other wavelengths with relatively short follow-up observations. We describe a simple procedure for making such estimates from X-ray surface brightness data, and comment on the spatial resolution required to apply this method as a function of cluster mass and redshift. Lastly, we also explore the potential impact of Chandra and XMM–Newton follow-up observations over the next decade on dark energy constraints from new cluster surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

New proxies for second-order cumulants of conserved charges in heavy-ion collisions within the EPOS4 framework

Proxies for cumulants of baryon number 𝐵, electric charge 𝑄, and strangeness 𝑆 are usually measured in heavy-ion collisions via moments of net-number distribution of given hadronic species. Since these cumulants of conserved charges are expected to be sensitive to the existence of a critical point in the phase diagram of nuclear matter, it is crucial to ensure that the proxies used as substitutes are as close to them as possible. Hence, we use the EPOS 4 framework to generate Au + Au collisions at several collision energies of the BNL Relativistic Heavy Ion Collider beam energy scan. We compute second-order net cumulants of 𝜋, 𝐾, and 𝑝, for which experimental data have been published as well as the corresponding conserved charge cumulants. We then compare them with proxies, defined in previous lattice QCD and hadron resonance gas model studies, which are shown to reproduce more accurately their associated conserved charge cumulants. We investigate the impact of hadronic rescatterings occurring in the late evolution of the system on these quantities, as well as the amount of signal actually originating from the bulk medium which endures a phase transition.

Physics↗

Object Proxy Patterns for Accelerating Distributed Applications

Workflow and serverless frameworks have empowered new approaches to distributed application design by abstracting compute resources. However, their typically limited or one-size-fits-all support for advanced data flow patterns leaves optimization to the application programmer—optimization that becomes more difficult as data become larger. The transparent object proxy, which provides wide-area references that can resolve to data regardless of location, has been demonstrated as an effective low-level building block in such situations. Here we propose three high-level proxy-based programming patterns—distributed futures, streaming, and ownership—that make the power of the proxy pattern usable for more complex and dynamic distributed program structures. We motivate these patterns via careful review of application requirements and describe implementations of each pattern. As a result, we evaluate our implementations through a suite of benchmarks and by applying them in three meaningful scientific applications, in which we demonstrate substantial improvements in runtime, throughput, and memory usage.

Distributed Computing↗

Quantitative Performance Assessment of Proxy Apps and Parents

This report completes the AD-CD-PA-1040 Milestone: We will develop a quantitative methodology to compare the fidelity of the ECP proxy applications with respect to the parent ECP application they represent. Fidelity includes comparison of appropriate dynamic execution characteristics (e.g., memory characteristics for a memory-matching proxy), computational requirements, and hardware bottlenecks. This methodology will include metrics and platform specifications (e.g., tools, specific systems), and will be applied to evaluate 4 ECP proxy applications.

97 MATHEMATICS AND COMPUTING↗

Proxy App Prospectus for ECP Application Development Projects

The Exascale Computing Project (ECP) includes 25 application development (AD) projects1 and five co-design centers funded by the Office of Science, NNSA, and National Cancer Institute. Their full code bases are large and complex, and can be difficult for co-design partners to assimilate for use in collaboration for Exascale challenges. To alleviate this challenge, proxy applications (“apps”) are being developed: these are small, self-contained, simplified codes that are intended to model the performance-critical computations within applications. Proxy apps also capture programming methods and styles that drive requirements for compilers and other elements of the tool chain. Within ECP, application teams, co-design centers, software technology (ST) projects and vendors all plan to use proxies as a major mechanism to drive collaborations and co-design solutions for exascale challenges.

97 MATHEMATICS AND COMPUTING↗

Abstract Machine Models and Proxy Architectures for Exascale Computing

To achieve exascale computing, fundamental hardware architectures must change. The most significant consequence of this assertion is the impact on the scientific and engineering applications that run on current high performance computing (HPC) systems, many of which codify years of scientific domain knowledge and refinements for contemporary computer systems. In order to adapt to exascale architectures, developers must be able to reason about new hardware and determine what programming models and algorithms will provide the best blend of performance and energy efficiency into the future. While many details of the exascale architectures are undefined, an abstract machine model is designed to allow application developers to focus on the aspects of the machine that are important or relevant to performance and code structure. These models are intended as communication aids between application developers and hardware architects during the co-design process. We use the term proxy architecture to describe a parameterized version of an abstract machine model, with the parameters added to elucidate potential speeds and capacities of key hardware components. These more detailed architectural models are formulated to enable discussion between the developers of analytic models and simulators and computer hardware architects. They allow for application performance analysis and hardware optimization opportunities. In this report our goal is to provide the application development community with a set of models that can help software developers prepare for exascale. In addition, through the use of proxy architectures, we can enable a more concrete exploration of how well new and evolving application codes map onto future architectures. This second version of the document addresses system scale considerations and provides a system-level abstract machine model with proxy architecture information.

97 MATHEMATICS AND COMPUTING↗

Proxy App Suite Release (FY2020)

Version 4.0 of the ECP Proxy App Suite is practically unchanged from the previous release. The current set of proxies has proven useful for many aspects of benchmarking and co-design and we see little reason to alter the suite. Although there have been few changes to the ECP suite, the team has been hard at work in other areas. In the area of Machine Learning (ML) we have now created a separate proxy suite dedicated to this scientific applications of ML.

97 MATHEMATICS AND COMPUTING↗

Earth rotation as a proxy for interannual variability in atmospheric circulation, 1860-present

Modern atmospheric and geodetic data sets have demonstrated that changes in the axial component of the atmosphere's angular momentum and in the rotation rate of the solid earth are closely coupled on time scales of up to several years. The feasibility of using a historical record of the earth's rotation as a proxy for year-to-year changes in the zonal wind field over the globe is examined. The bulk of the earth rotation series acquired for this purpose is based on telescopic observations of the occultation of stars by the moon; semiannual values of changes in the length of day derived from these observations have acceptably small errors from about 1860 onwards. These values are filtered to remove decade-scale fluctuations, which are driven primarily by nonatmospheric processes, and the resulting proxy series is examined to see if it contains a signal associated with one of the major modes of interannual variability in the atmosphere, namely that due to the El Nino/Southern Oscillation (ENSO). According to tests of statistical significance, such a signal is present in the historical earth rotation series, in that the day is typically longer during the year following an ENSO oceanic warm event than otherwise. Therefore other signals of interannual variability in the proxy series are considered. In particular, it is inferred that noteworthy trends in atmospheric interannual variability have occurred over the last century; for example, the decade of the 1920s was marked by much larger year-to-year changes in the zonal circulation over the globe than that of the 1940s. Based on modern atmospheric data, it is suggested that most of these circulation changes have resulted from anomalies in the region between 30 deg N and 30 deg S.

Salstein, David A.↗

Comparing Sunspot Area and Sunspot Number as Proxies for Long-term Solar Irradiance Variation

Because relevant observations from space began only in 1979 with Nimbus-7, it is impossible to correlate direct measurements of small changes in solar irradiance with terrestrial temperature over a number of solar cycles. Yet there is recent evidence that some feature of solar change over a cycle may have a larger influence on climate than would result from merely introducing the additional amount of heat delivered to Earth's atmosphere at solar minimum. It would be useful to check this possibility over several solar cycles. To do this, we would need a sufficiently reliable proxy for irradiance change that at least survives a test against the space observations. Sunspot area is a fairly straightforward parameter to measure, and is associated with the extent of magnetic activity known to correlate strongly with solar irradiance change. We have tested the use of sunspot area as a long-term proxy for solar irradiance change, using observations made at the Coimbra Solar Observatory, from which we obtain both statistically weighted sunspot numbers and sunspot areas over the period 1980-1992. These are both correlated with solar irradiance values measured from Nimbus-7 spacecraft over the same time period, to see if sunspot area offers affords a strong positive correlation and also a distinct advantage over sunspot number as a useful proxy that can then be compared with terrestrial temperature records. Preliminary results yield a positive correlation of 0.71 for sunspot area, but further tests are being conducted and will be reported.

Jordan, Stuart D.↗

Evaluating Ground-based Proxies for Solar Irradiance Variation

In order to determine what ground-based proxies are best for evaluating solar irradiance variation before the advent of space observations, it is necessary to test these proxies against space observations. We have tested sunspot number, total sunspot area, and sunspot umbral area against the Nimbus-7 measurements of total solar irradiance variation cover the eleven year period 1980-1990. The umbral area yields the best correlation and the total sunspot area yields the poorest. Reasons for expecting the umbral area to yield the best correlation are given, the statistical procedure followed to obtain the results is described, and the value of determining the best proxy is discussed. The latter is based upon the availability of an excellent database from the Greenwich Observatory obtained over the period 1876-1976, which can be used to estimate the total solar irradiance variation before sensitive space observations were available. The ground-based observations used were obtained at the Coimbra Solar Observatory. The analysis was done at Goddard using these data and data from the Nimbus-7 satellite.

Oegerle, William↗

Forecasting Lightning Threat Using WRF Proxy Fields

Objectives: Given that high-resolution WRF forecasts can capture the character of convective outbreaks, we seek to: 1. Create WRF forecasts of LTG threat (1-24 h), based on 2 proxy fields from explicitly simulated convection: - graupel flux near -15 C (captures LTG time variability) - vertically integrated ice (captures LTG threat area). 2. Calibrate each threat to yield accurate quantitative peak flash rate densities. 3. Also evaluate threats for areal coverage, time variability. 4. Blend threats to optimize results. 5. Examine sensitivity to model mesh, microphysics. Methods: 1. Use high-resolution 2-km WRF simulations to prognose convection for a diverse series of selected case studies. 2. Evaluate graupel fluxes; vertically integrated ice (VII). 3. Calibrate WRF LTG proxies using peak total LTG flash rate densities from NALMA; relationships look linear, with regression line passing through origin. 4. Truncate low threat values to make threat areal coverage match NALMA flash extent density obs. 5. Blend proxies to achieve optimal performance 6. Study CAPS 4-km ensembles to evaluate sensitivities.

McCaul, E. W., Jr.↗