Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADAR MAP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Differential Radar Interferometry Maps Changes In Elevation

Differential radar interferometry uses data from synthetic-aperture radar (SAR). Three passes of SAR yield three amplitude-and-phase images, from which two interferograms (phase-difference images) made. Interferograms used to make third, "double-difference" interferogram indicating vertical motion of terrain between passes. Vertical earthquake motions as small as 1 cm detectable. Used to make extensive, accurate maps of such geophysical phenomena as heaving and buckling in fault zones, motions to tectonic plates, residual displacements from earthquakes, motions from prevolcanic swelling, motions of glaciers, tides, and thermal expansion of mountains from diurnal heating.

Gabriel, Andrew K.↗

A radar-echo model for Mars

A radar-echo model for Mars based on 12.6 continuous-wave radio transmissions backscattered from the planet is developed. Mars' surface is divided into radar map units that are based on generalized geologic map units, and the radar map units are further subdivided using thermal inertias because the geologic units are insufficient to account for the quasi-specular echoes. The most important of the model's 118 radar-scattering units are characterized. Analyses of the observations and the model show that there are at least two populations of martian surfaces with distinct radar properties: the cratered uplands and northern low plains, and volcanoes and fields of lava flows. It is concluded that there are two dominant populations of surfaces that have distinct echo properties and that there is general agreement between the quasi-specular echo reflectivities of the present model and those of many other radar observations of Mars.

Moore, H. J.↗

Stereo radar for mapping and interpretation

The use of terrain imaging radar to extract elevation information by stereo viewing and measurement is discussed. Either a three dimensional visual model or elevation measurements may be obtained by simultaneous viewing or differential measurement of images obtained by a side-looking radar from two different flightpaths. Expressions describing radar image geometry, model vertical exaggeration, and stereo measurement accuracy are derived. The dependence of the exaggeration and accuracy on system parameters and key system errors is derived, discussed, and illustrated by application to several airborne and spaceborne systems and system concepts, and the results of some preliminary measurements of imagery from two airborne and one spaceborne system are given.

Graham, L.↗

GeoSAR: A Radar Terrain Mapping System for the New Millennium

GeoSAR Geographic Synthetic Aperture Radar) is a new 3 year effort to build a unique, dual-frequency, airborne Interferometric SAR for mapping of terrain. This is being pursued via a Consortium of the Jet Propulsion Laboratory (JPL), Calgis, Inc., and the California Department of Conservation. The airborne portion of this system will operate on a Calgis Gulfstream-II aircraft outfitted with P- and X-band Interferometric SARs. The ground portions of this system will be a suite of Flight Planning Software, an IFSAR Processor and a Radar-GIS Workstation. The airborne P-band and X-band radars will be constructed by JPL with the goal of obtaining foliage penetration at the longer P-band wavelengths. The P-band and X-band radar will operate at frequencies of 350 Mhz and 9.71 Ghz with bandwidths of either 80 or 160 Mhz. The airborne radars will be complemented with airborne laser system for measuring antenna positions. Aircraft flight lines and radar operating instructions will be computed with the Flight Planning Software The ground processing will be a two-step step process. First, the raw radar data will be processed into radar images and interferometer derived Digital Elevation Models (DEMs). Second, these radar images and DEMs will be processed with a Radar GIS Workstation which performs processes such as Projection Transformations, Registration, Geometric Adjustment, Mosaicking, Merging and Database Management. JPL will construct the IFSAR Processor and Calgis, Inc. will construct the Radar GIS Workstation. The GeoSAR Project was underway in November 1996 with a goal of having the radars and laser systems fully integrated onto the Calgis Gulfstream-II aircraft in early 1999. Then, Engineering Checkout and Calibration-Characterization Flights will be conducted through November 1999. The system will be completed at the end of 1999 and ready for routine operations in the year 2000.

Thompson, Thomas↗

The evaluation of 3cm-wavelength radar for mapping surface deposits in the Bristol Lake/Granite Mountain area, Mojave Desert, California

Surface deposits in the Bristol Lake/Granite Mountains area, Mojave Desert, California were mapped using high resolution 3 cm wavelength radar images. The surface deposits range from silt to boulders in size and were separated into six radar-rock units on the basis of radar return signatures (brightness and texture) and geomorphic expression. Field reconnaissance of the six units showed that the brightness of the radar signatures on the images correlates with the surface roughness of each unit. Two major radar signatures anomalies were noted during the study. A dark radar signature for the large sand ridges in the Kelso Dunes area and a distinct northwest trending contrast boundary between bright and dark radar signatures in the Bristol Dry Lake area. Field reconnaissance of the two areas indicated that near surface moisture may be the cause of dark signatures. Dune areas with little to no vegetation produce a dark signature, whereas areas with sparse to moderate vegetation produce an intermediate to dark signature.

Sugiura, R.↗

Recent advances in geologic mapping by radar

Quantitative techniques are available which allow the analysis of SAR images for the derivation of geological surface and process data. In conjunction with calibrated radar sensors operating at several incidence angles, wavelengths, and polarizations, the compilation of multiparameter radar signatures of lithological and geomorphic units can accordingly proceed for geological mapping in unknown areas. While radar image tone can be used in arid zones to derive surface micromorphology, heavily vegetated tropical regions require the analysis of radar image texture by means of Fourier techniques which decompose the image into bandpasses that represent different scales of texture.

Farr, T. G.↗

Ground data system architecture for precipitation determination from space-based radar

The Tropical Rain Mapping Radar (Tramar) is proposed as an attached payload as part of the Space Station Earth Observing System Program. Tramar would measure rainfall rates, rain velocity, and rain cell areal extent in the latitude band from 30 deg S to 30 deg N for use in studies of large-scale atmospheric circulation, variations of latent heating, tropical hydrologic processes, and mesoscale precipitation systems. The Tramar science requirements, radar design, and ground data system architecture are examined, including the three-dimensional scan geometry, the radar system performance parameters, the production of earth-gridded maps, and the telemetry, sensor, radiometric, and geophysical data that would be obtained by Tramar.

Hilland, Jeffrey E.↗

The TOPSAR interferometric radar topographic mapping instrument

We have augmented the NASA DC-8 Airborne Synthetic Aperture Radar (AIRSAR) instrument with a pair of C-band antennas displaced across the track to form an interferometer sensitive to topographic variations of the Earth's surface. The antennas were developed by Alenia Spazio under the sponsorship of the Italian Space Agency (ASI), and the AIRSAR instrument and modifications to it supporting TOPSAR were sponsored by NASA. A new data processor was developed at JPL for producing the topographic maps. As of May 1991, one engineering flight line over San Francisco, CA was reduced to a cartographically rectified topographic map. Analysis of the results indicates that statistical errors are in the range of 2 to 4 m, while systematic effects due to aircraft motion are in the range of 6 to 12 m. Future aircraft motion compensation algorithms should reduce the systematic variations to near zero, while the statistical errors could likely be reduced to 2 m or less with some processor improvements.

Zebker, Howard A.↗

Imaging radar applications to mapping and charting

The paper outlines the major actual and potential radar mapping applications, gives an account of the present state of satellite radar imaging, and reviews the radargrammetric work achieved since 1972. Attention is focused on the mapping methods and accuracy regarding single-image radar mapping, stereo radargrammetry, and mapping from blocks of overlapping imagery. It is recommended that more radargrammetric expertise be applied in radar mapping projects so that full advantage may be taken of the metric information potential of imaging radar.

Leberl, F.↗

Radar for Mapping Sea Ice

X-band system has 100-m2 resolution. Wide swath imaging radar of synthetic aperature type transmits signal to ground station for subsequent processing into imagery. Concept meets functional requirements for continuously mapping sea ice in north and south polar regions.

Barath, F. T.↗

Topographic mapping using radar interferometry - Processing techniques

In the summer of 1991 the NASA DC-8 airborne synthetic aperture radar (SAR) system acquired data with the radar configured in a C-band across-track interferometer mode. The data were processed to generate rectified topographic maps. A new processing scheme was developed featuring motion compensation, absolute phase retrieval, and three-dimensional 1ocation. The new processor has been tested using data which were acquired with extreme aircraft motion so that performance could be evaluated under adverse conditions. The topographic maps generated by the radar were compared to Digital Elevation Models (DEM's) derived using conventional optical stereo techniques. In one region we measured rms elevation deviations which were less than the specified DEM accuracy, and in the region covered by the more accurate DEM we found errors varying from 2.2 m rms in relatively flat terrain up to 5.0 m in mountainous areas. The rms difference between radar and DEM elevations over the 6.5 km by 22 km area covered by the more accurate DEM was 3.6 m.

Madsen, Soren N.↗

User guide to the Magellan synthetic aperture radar images

The Magellan radar-mapping mission collected a large amount of science and engineering data. Now available to the general scientific community, this data set can be overwhelming to someone who is unfamiliar with the mission. This user guide outlines the mission operations and data set so that someone working with the data can understand the mapping and data-processing techniques used in the mission. Radar-mapping parameters as well as data acquisition issues are discussed. In addition, this user guide provides information on how the data set is organized and where specific elements of the set can be located.

Wall, Stephen D.↗

Remote sensing for oceanography, hydrology and agriculture; Proceedings of Symposia A5, A3 and A9 of the COSPAR 29th Plenary Meeting, Washington, Aug. 28-Sept. 5, 1992

New results from satellite studies of the ocean and radar mapping of the earth are presented. Atttention is given to data from the ERS-1 satellite. Synthetic aperture radar mapping of land surface features and sea ice, radar backscatter measurements, and orbit altitude measurements are discussed. The use of remote sensing in hydrology, soil moisture determination, precipitation measurement, agricultural meteorology, and crop growth estimation is reviewed.

Gower, J. F. R.↗

Paraboloidal Antenna Radiates Fan Or Pencil Beams

Shape of beam determined by type of feed. Theory and experiments show same paraboloidal antenna reflector used to radiate pencil beam or fan beam, depending on configuration of feed. Although pencil-shaped beam desirable in many applications, fan-shaped beam preferred in some scanning-radar and mapping-radar systems. Experiment performed with paraboloidal reflector having focal length of 48 in. (1.22 m) and diameter of 3.65 m. Shows fan beams generated in this way and not seriously distorted by feed offsets tested. Also shows because reflector in near field of feed, fan beam not necessarily focused by placing feed at focal plane.

Huang, John↗

An orbital radar mapper of venus in the 1980's: Mission design and analysis

The examination of Venus topography, obscured for photographic imaging, is reported in the application of airborne radar mapping systems to an orbiter mission about the planet. Extrapolating the improving capabilities of earth-based radar study of Venus into the 1980's is reported which suggests that only a non-uniform, poorly resolved surface profile will be possible relative to the potential for 100% coverage at 100 meter resolution with an orbital radar. The intent of this paper is: to define mission opportunities favorable for a Venus orbital mapper during the 1980's, to examine orbit design problems associated with mapping radar systems, to establish with flexibility exists for an adaptive mapping strategy, to contribute to the sizing of particular spacecraft systems, and to suggest a reference mission design and demonstrate feasibility.

Asnin, S. K.↗

An orbital radar mapper of Venus in the 1980's - Mission design and analysis

A reasonable approach to the examination of Venus topography, obscured for photographic imaging, is available in the application of airborne radar mapping systems to an orbiter mission about the planet. Extrapolating the improving capabilities of earth-based radar study of Venus into the 1980's suggests that only a non-uniform, poorly resolved surface profile will be possible relative to the potential for 100% coverage at 100 meter resolution with an orbital radar. The intent of this paper is to define mission opportunities favorable for a Venus orbital mapper during the 1980's, to examine orbit design problem associated with mapping radar systems, to establish what flexibility exists for an adaptive mapping strategy, to contribute to the sizing of particular spacecraft systems, to suggest a reference mission design and demonstrate mission feasibility.

Asnin, S. K.↗

WET Water Resources: A Google Earth Engine Python API Tool to Automate Wetland Extent Mapping Using Radar Satellite Sensors for Wetland Management and Monitoring

Wetland ecosystems are annually or seasonally wet transition zones between land and water. They provide a range of ecosystem services such as water filtration, flood mitigation, and carbon sequestration, as well as hosting biodiversity hotspots. Although they fulfill fundamental physical and natural processes, wetland extent and health are threatened by anthropogenic influences related to urbanization, population increase, pollution, and climate change. Recognizing the need to quantitatively monitor changes in these recently threatened ecosystems in a timely and cost-effective way, we developed a Google Earth Engine (GEE) Python API tool for automated wetland extent mapping using optical and radar satellite sensors that can be applied globally. The tool will significantly improve wetland change analysis and monitoring as the optical and SAR data proves high resolution (5-10 m) imagery, and SAR data is unaffected by cloud cover and light availability (day vs. night), which are common limitations for other remotely sensed sensors. The tool utilizes Copernicus Sentinel-1 C-band and NISAR L-band synthetic aperture radar (SAR) imagery. During image preprocessing, we applied a MODIS snow mask product to mask global snow coverage, which would affect land classification sensitivity. Calibration and validation were conducted through a historical change and sensitivity analysis of the Sudd watershed located in central Sudan. The tool was the first of its kind, as it enables NISAR data processing through an open-source GEE repository, further expanding and improving the utility of NASA Earth observations and contributing to NASA Open Science initiatives. We anticipate the tool will be used by researchers and practitioners interested in wetland monitoring and management..

Lori Berberian↗