Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIANT HEATING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Solar radiation, phytoplankton pigments and the radiant heating of the equatorial Pacific warm pool

Recent optical, physical, and biological oceanographic observations are used to assess the magnitude and variability of the penetrating flux of solar radiation through the mixed layer of the warm water pool (WWP) of the western equatorial Pacific Ocean. Typical values for the penetrative solar flux at the climatological mean mixed layer depth for the WWP (30 m) are approx. 23 W/sq m and are a large fraction of the climatological mean net air-sea heat flux (approx. 40 W/sq m). The penetrating solar flux can vary significantly on synoptic timescales. Following a sustained westerly wind burst in situ solar fluxes were reduced in response to a near tripling of mixed layer phytoplankton pigment concentrations. This results in a reduction in the penetrative flux at depth (5.6 W/sq m at 30 m) and corresponds to a biogeochemically mediated increase in the mixed layer radiant heating rate of 0.13 C per month. These observations demonstrate a significant role of biogeochemical processes on WWP thermal climate. We speculate that this biogeochemically mediated feedback process may play an important role in enhancing the rate at which the WWP climate system returns to normal conditions following a westerly wind burst event.

Siegel, David A.↗
NASA NTRS1972

Radiant heat transfer between nongray directional surfaces.

Real surface property effects on local and overall heat transfer are studied for a simple system of interacting opaque surfaces. Wavelength, temperature and directional dependence of surface properties is included in the analysis for equal and unequal temperature specularly reflecting surfaces. Tungsten is employed as a representative metal and Roberts' model is used to describe the wavelength and temperature dependence of its optical parameters. The relationships of electromagnetic theory are employed to describe the directional dependence of spectral properties. Numerical results establish that gray direction independent property analysis adequately predicts the general trends of real surface analysis. The results also establish that spectral and temperature dependence of surface properties influences radiant heat transfer to a greater degree than does directional dependence of properties. Property models which adequately account for the nongray character of engineering surfaces while neglecting directional dependence of properties can provide heat transfer results of acceptable engineering accuracy.

Fischer, W. D.↗
NASA NTRS2015

Radiant Heating Tests on Meteoritic Material

A new effort geared toward modeling the physics of meteor entry and break-up is underway at NASA Ames Research Center. This is part of a broader interdisciplinary effort on providing physics-based risk assessment models for potentially hazardous objects. As part of the entry modeling task we are seeking to improve our understanding of, among other things, the ablation of meteoric material during high speed entry into earths atmosphere. Meteoroid entry differs greatly in some key respects from spacecraft entry modeling. First, the aerothermal environment at these high velocities (18 km/s) is dominated by radiation. Second, meteoroids less than, say, 50m in size, will likely lose a significant portion of their mass during the high-speed atmospheric entry process due to vaporization as well as melting and spallation. The mass of the object, in turn, directly affects the amount of energy deposited in the atmosphere, and therefore the amount of damage done. Thus it is important for us to understand and be able to model this process in greater detail in order to assess the hazard posed by these objects.In this presentation, we first give an overview of the simple ablation models that are typically used in meteor entry calculations. Additionally, we will present a new model which utilizes a similar approach to what is typically done for spacecraft TPS response modeling. This uses an equilibrium assumption near the surface to compute the ablation rate, as is done in heritage material response codes. Next we describe the radiant heating experiment which uses a high-powered laser to emulate the radiation dominated heating environment experienced by meteoroids during atmospheric entry. The facility the Laser Hardened Material Evaluation Laboratory (LHMEL) permits us to expose samples of meteoritic material to heating rates in excess of 100kW/sq.cm. An overview of the experimental set-up and test plan for the initial exploratory campaign at this facility will be given. Then we present both qualitative and quantitative results from this initial test series. Comparisons between predicted and measured ablation rates suggest that there may be significant blockage of the incident beam by the ablation plume. Furthermore, melt is shown to be a significant ablation mechanics, even at high heating rates (16 kW/sq.cm). Finally, comparisons between the phenomenology of the ablation of terrestrial rocks namely, basalt -- to that of meteorites show very different behavior. This is shown to likely be due in part to the effect of composition on the melt viscosity.

Stern, Eric↗
NASA NTRS1973

Radiant Heat Transfer in Reusable Surface Insulation

During radiant testing of mullite panels, temperatures in the insulation and support structure exceeded those predicted on the basis of guarded hot plate thermal conductivity tests. Similar results were obtained during arc tunnel tests of mullite specimens. The differences between effective conductivity and guarded hot plate values suggested that radiant transfer through the mullite was occurring. To study the radiant transport, measurements were made of the infrared transmission through various insulating materials and fibers of interest to the shuttle program, using black body sources over the range of 780 to 2000 K. Experimental data were analyzed and scattering coefficients were derived for a variety of materials, fiber diameters, and source temperature.

Hughes, T. A.↗
NASA NTRS1965

Radiant heating simulation.

Radiation energy transfer rates characteristic of environments for advanced entry missions, examining laboratory simulation techniques, particularly plasma arc generators

PLASMA GENERATOR↗
NASA NTRS1963

Radiant Heat Transfer to Absorbing Gases Enclosed Between Parallel Flat Plates with Flow and Conduction

An analysis is presented for obtaining two-dimensional temperature profiles and heat transfer in a radiation-absorbing gray gas of uniform absorptivity under the combined influence of thermal radiation, conduction, and gas flow. The gas is enclosed in a channel of infinite width and finite length formed by two semi-infinite parallel flat plates. These plates are black emitting surfaces, and the ends of the channel are formed by porous black surfaces through which the gas can flow into or out of the channel. These porous black end surfaces are used to simulate the radiation environment external to the channel. First, results are obtained for heat transfer between the plates in the absence of both conduction and flow. These results are found to be in good agreement with those obtained for the same conditions by previous workers. Results are then presented for heat transfer between the plates for the case of a radiating and conducting, but stagnant, gas separating the plates. The effects of the interactions between radiation and conduction are discussed. It was found that the heat transfer for combined radiation and conduction in an absorbing gas is slightly greater than the sum for each process taken separately. Finally, results are given for heat transfer from the plates to a flowing, radiating gas in the absence of conduction. The two plates are at the same temperature, and the gas enters the channel with uniform velocity and temperature. The results obtained for this case indicate that the heat transferred to the flowing gas from the constant temperature surfaces goes through a maximum as the absorptivity of the gas increases. This is in qualitative agreement with earlier results obtained by other investigators. All the results are presented in terms of dimensionless parameters, for the sake of generality, and the derivation of the dimensionless parameters, which are indicative of the effects of conduction and flow is presented.

Gray Gas↗
NASA NTRS1970

Directional control of radiant heat

Surface with grooves having flat bases gives directional emissivities and absorptivities that can be made to approximate a perfect directional surface. Radiant energy can then be transferred in desired directions.

Howell, J. R.↗
NASA NTRS1952

Radiant heat transfer from flames in a single tubular turbojet combustor / Leonard Topper

An experimental investigation of thermal radiation from the flame of a single tubular turbojet-engine combustor to the combustor liner is presented. The effects of combustor inlet-air pressure, air mass flow, and fuel-air ratio on the radiant intensity and the temperature and emissivity of the flame are reported. The total radiation of the "luminous" flames (containing incandescent soot particles) was much greater (4 to 21 times) than the "nonluminous" molecular radiation. The intensity of radiation from the flame increased rapidly with an increase in combustor inlet-air pressure; it was affected to a lesser degree by variations in fuel-air ratio and air mass flow.

COMBUSTION RESEARCH - GENERAL↗