Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIOLYSIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Sub-picosecond Production of Solute Radical Cations in Tetrahydrofuran after Radiolysis

Ultrafast hole transfer from solvent radical cations produced by radiolysis with ~10 ps, 9 MeV electron pulses to solutes was investigated in tetrahydrofuran (THF). Because of rapid fragmentation of initially produced THF +• , solute radical cations are not expected and have not previously been reported. Using 9,9-Dihexyl-2,7-dibromofluorene (Br 2 F) at 5 to 1000 mM, Br 2 F +• was observed with radiation chemical yields up to G = 2.23 / 100 eV absorbed. While more than half of this was the result of direct solute ionization, the results highlight the importance of capture of holes from THF +• prior to solvation and fragmentation. The observed data show a time-resolution limited (15 ps) rise in transient absorption of Br 2 F +• , identical in form to reports of pre-solvated or dry electron capture in water and a few organic liquids, including THF. The results were thus interpreted with a similar formalism, finding C 37 = 1.7 M, the concentration at which 37% of holes escape capture. The yield of solvent hole capture can be accounted for by the formation of solvent holes adjacent to solute molecules reacting faster than they can fragment, however mechanisms such as delocalized holes or rapid hopping may play a role. Finally, low temperature results find over two times more capture, supporting the speculation that if THF +• was longer lived, the yield of capture in under 15 ps would have been at least 2x larger at 1 M Br 2 F, possibly capturing nearly all available holes from the solvent.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Pushing the limits of the electrochemical window with pulse radiolysis in chloroform

Pulse radiolysis (PR) enables the full redox window of a solvent to be accessed, as it does not require electrodes or electrolyte which limit the potentials accessible in voltammetry measurements. PR in chloroform has the additional possibility to enable reaching highly positive potentials because of its large ionization potential (IP). We report PR experiments demonstrated the formation of the (deuterated) chloroform radical cation CDCl 3 + ˙, identifying it as the source of the broad absorption in the visible part of the spectrum. Results indicated that solutes with a redox potential up to +3.7 V vs. Fc/Fc + can be oxidized by CDCl 3 + ˙, which is far beyond what is possible with electrochemical techniques. Oxidation is not efficient because of rapid geminate recombination with chloride counterions, but also due to rapid decomposition of CDCl 3 + ˙ which limits the yield of otherwise longer-lived free ions. The rapid, 6 ± 3 ns, decomposition, confirmed by two independent experiments, means that a solute must be present at a concentration >100 mM to capture >90% of the free holes formed. Addition of ethene removes the broad, overlapping absorptions from ubiquitous (chlorine atom, solute) complexes created by PR in halogenated solvents enabling clear observation of solute cations. The results also unravel the complex radiation chemistry of chloroform including the large reported value G (–CHCl 3 ) = 12 molecules/100 eV for the decomposition of chloroform molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-electron redox kinetics of aqueous transition metal couples Zn 2+/+ , Co 2+/+ , and Ni 2+/+ using pulse radiolysis

The one-electron redox potentials for aqueous metal couples Co 2+/+ and Ni 2+/+ have been investigated by using pulse radiolysis using their reactions with a series of reference compounds to establish the most positive upper limits of E 0 . Experiments with Zn + were also carried out to confirm the characteristic shape of the expected reduction kinetics. Both formate ions and t-BuOH were employed to scavenge ˙OH radicals and ˙H atoms. Kinetics and fitted first and second order reaction rates have been reported for reactions with methyl viologen, fluorescein, Ru(NH 3 ) 6 3+ , Co(en) 3 2+ , Co(sepulcrate) 3+ , Ru(bpy) 3 2+ , Cr(bpy)33+, and Ni(Me 6 [14]4,11-dieneN4) 2+ . Previous work demonstrated that both Co 2+ and Ni 2+ can be reduced by CO 2 ˙- radicals, giving a negative E 0 limit of -1.9 V vs. SHE. A definite reaction of Ni + with fluorescein di-anions provides a new upper limit of the Ni 2+/+ couple as -0.906 V vs. SHE. The reaction of Co + with Ru(bpy) 3 2+ has been confirmed, giving E 0 = -1.3 V vs. SHE as a rigorous upper limit of the Co 2+/+ couple. In the case of Co 2+/+ , kinetics were complicated by a self-catalyzed metal clustering phenomenon. Initiation rate constants of this process have also been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Early-stage oxidation and subsequent damage of the used nuclear fuel extractant TODGA; electron pulse radiolysis and theoretical insights

Radiation induced damage of extractant molecules is a well-known phenomenon responsible for reducing efficiency and increasing the waste and cost of reprocessing used nuclear fuel (UNF). As such, understanding early-stage (pico- to nanoseconds) radiation-induced reaction mechanisms is essential for informing the design of next generation extractants with enhanced radiation robustness. Here, in this work, we utilized picosecond and nanosecond electron pulse radiolysis experiments to probe the early-stage radioactive environment experienced by the organic phase extractant N,N,N',N'-tetraoctyldiglycolamide (TODGA), proposed for separating highly radioactive trivalent minor actinides (specifically americium and curium) from the trivalent lanthanides. Using comparisons to the similar ionization potential (IP) solute p-xylene, this work determined the mechanism of reaction with the ionized diluent (i.e., n-dodecane radical cation, DD˙ + ) is hole transfer to produce TODGA˙ + . At high TODGA concentrations (>100 mM), the majority of this transfer occurs faster than 10 ps via the capture of DD˙ + holes prior to their solvation with a C 37 = 300 mM. The surviving solvated holes were captured with k = (2.38 ± 0.15) × 10 10 M -1 s -1 . Attempts at subsequent hole transfer to lower IP solutes found that only 10% of holes were transferred, indicating bond rupture of TODGA˙ + occurs within 2.6 ns at 200 mM TODGA. Possible reaction pathways for the rapid decomposition of TODGA˙ + were explored using a combination of experiments and density functional theory (DFT) calculations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Identification and time evolution of thionyl chloride (SOCl 2 ) radiolysis products

In this study, innovative solutions are needed to reduce the amount of high-level waste generated by used nuclear fuel recycling strategies to support the widespread adoption of sustainable nuclear fission energy technologies. To this end, a new sulfur chloride-based process has been developed to recycle zirconium alloy-based materials, which make up a significant fraction of high-level radioactive waste. To support the continued development of this process, we present new data on the potential reaction pathways over time of the products arising from the gamma and electron beam radiolysis of neat thionyl chloride (SOCl 2 ). Interrogation of the gamma irradiated liquid by Raman spectroscopy provided more conclusive identification of the SOCl 2 degradation products, specifically sulfur dichloride (SCl 2 ), molecular chlorine (Cl 2 ), sulfur dioxide (SO 2 ), and sulfuryl chloride (SO 2 Cl 2 ). In comparison, the high dose rate (~10 7 Gy s -1 ) electron beam irradiations formed significantly more degradation products. For both cobalt-60 gamma and electron beam irradiations, the observed degradation products were found to evolve as a function of time post-irradiation via the same reaction pathways, with indication of a solvent regeneration mechanism. These findings are fortuitous for process development, as such a mechanism would be beneficial for process longevity and cost effectiveness.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Radiolysis of Organic Solvents in the Presence of Plutonium

In this report, we describe a set of organic solvent radiolysis experiments performed at Lawrence Livermore National Laboratory. The goal of these experiments was to test for radiolytic solvent damage due to the presence of plutonium (Pu) particulates in solvent baths that are part of a materials production and cleaning workflow. The solvents (NOVEC 72DE and NOVEC 7500) were tested at a Pu activity level of ~1 microCi/mL using weapons grade Pu -- equivalent to 0.35 g Pu dispersed in a 5 gallon fluid bath filled to 4.5 gallons. Experiments were performed using fresh solvent and solvent that was 95% evaporated; the evaporated solvent was meant to represent fluids that may be in the solvent bath and subjected to evaporation and refilling without a full solvent replacement.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

The radiolysis of tryptophan and leucine with P-32 beta-radiation

The paper extends earlier experiments on the radiolysis of DL-tryptophan using P-32 beta-radiation to longer reaction times, observing complete destruction of tryptophan by secondary, nonradiolytic processes. In addition DL-leucine is irradiated with P-32 beta-irradiation at -196 C, leading to radiolyses to the extents of about 20-30%, but observing no concomitant asymmetric bias. The complete absence of asymmetric bias in the present and earlier (Bonner et al., 1979) radiolyses of aqueous tryptophan at -25 C and the present radiolyses of water-free leucine at -196 C using P-32 beta-radiation and its accompanying bremsstrahlung leave it an open question whether or not the Vester-Ulbricht beta-decay/bremsstrahlung mechanism for the origin of optical activity is a viable one.

Blair, N. E.↗

Pulsed radiolysis of model aromatic polymers and epoxy based matrix materials

Models of primary processes leading to deactivation of energy deposited by a pulse of high energy electrons were derived for epoxy matrix materials and polyl-vinyl naphthalene. The basic conclusion is that recombination of initially formed charged states is complete within 1 nanosecond, and subsequent degradation chemistry is controlled by the reactivity of these excited states. Excited states in both systems form complexes with ground state molecules. These excimers or exciplexes have their characteristics emissive and absorptive properties and may decay to form separated pairs of ground state molecules, cross over to the triplet manifold or emit fluorescence. ESR studies and chemical analyses subsequent to pulse radiolysis were performed in order to estimate bond cleavage probabilities and net reaction rates. The energy deactivation models which were proposed to interpret these data have led to the development of radiation stabilization criteria for these systems.

Gupta, A.↗

Time-resolved spectroscopy of solid poly/1-vinyl naphthalene/ following electron beam pulse radiolysis - Pulse radiolytic studies on polymers

Transient emission studies following pulse radiolysis of solid poly(1-vinyl naphthalene) show existence of excited monomers and two excimers. Quenching experiments indicate that excimers are not formed directly by recombination of ions but probably by trapping of migrating monomeric excitation in preformed traps whose density is approximately one in 1000.

Coulter, D. R.↗

Pulse radiolysis of epoxy-based matrix materials

Electron beam pulse radiolysis (600 KeV, 3 nsec) experiments have been carried out on epoxy-based matrix materials. Time and wavelength resolved emission and transient absorption techniques as well as ESR studies have been utilized to identify and monitor short lived reactive intermediates resulting from energetic electron impact. An energy deactivation model based on the results of this work has been developed. Recombination of primary charged species is found to be fast, resulting in the formation of longer lived excited electronic states and radicals which control the subsequent energy deactivation.

Coulter, D. R.↗

Radiolysis of Amino Acids in Outer Solar-System Ice Analogs

Amino acids have been found in cometary dust particles and in the organic component of meteorites. These molecules, important for pre-biotic chemistry and for active biological systems, might be formed in cold planetary or interstellar environments and then delivered to H20-rich surfaces in the outer solar system. Many models for the availability of organic species on Earth and elsewhere depend on the ability of these molecules to survive in radiation-rich space environments. This poster presents results of O.8-MeV proton radiolysis of ice films at lS-140K. using infrared spectroscopy, the destruction rates of glycine, alanine, and phenylalanine have been determined for both pure films and those containing amino acids diluted in H2o. our results are discussed in terms of the survivability of these molecules in the icy surfaces present in the outer solar system and the possibility of their detection by instruments on board the New Horizons spacecraft

Gerakines, Perry A.↗

Coloring Jupiter's Clouds: Radiolysis of Ammonium Hydrosulfide (NH4SH)

Here we present our recent studies on the color and spectral reflectance changes induced by approximately 0.9 megaelectronvolts proton irradiation of ammonium hydrosulfide, NH4SH, a compound predicted to be an important tropospheric cloud component of Jupiter and other giant planets. Ultraviolet-visible spectroscopy was used to observe and identify reaction products in the ice sample and digital photography was used to document the corresponding color changes at 10-160 degrees Kelvin. Our experiments clearly show that the resulting color of the sample depends not only on the irradiation dose but also the irradiation temperature. Furthermore, unlike in our most recent studies of irradiation of NH4SH at 120 degrees Kelvin, which showed that higher irradiation doses caused the sample to appear green, the lower temperature studies now show that the sample becomes red after irradiation. However, comparison of these lower temperature spectra over the entire spectral range observed by HST (Hubble Space Telescope) shows that even though the color and spectrum resemble the color and spectrum of the GRS (Jupiter’s Great Red Spot), there is still enough difference to suggest that another component may be needed to adequately fit spectra of the GRS and other red regions of Jupiter's clouds. Regardless, the presence of NH4SH in the atmosphere of Jupiter and other gas giants, combined with this compound's clear alteration via radiolysis, suggests that its contribution to the ultraviolet-visible spectra of any of these object's clouds is significant.

ultraviolet-visible spectroscopy↗

Radiolysis of Macromolecular Organic Material in Mars-Relevant Mineral Matrices

The fate of organic material on Mars after deposition is crucial to interpreting the source of these molecules. Previous work has addressed how various organic compounds at millimeter depths in sediments respond to ultraviolet radiation. In contrast, this study addressed how high‐energy particle radiation (200‐MeV protons, simulating the effect of galactic cosmic rays and solar wind at depths of <4–5 cm) influences organic macromolecules in sediments. Specifically, we report the generation of organic‐acid radiolysis products after exposure to radiation doses equivalent to geological time scales (1–7 Myr). We found that formate and oxalate were produced from a variety of organic starting materials and mineral matrices. Unlike ultraviolet‐driven reactions that can invoke Fenton chemistry to produce organic acids, our work suggests that irradiation of semiconductor surfaces, such as TiO2 or possible clay minerals found on Mars, forms oxygen and hydroxyl radical species, which can break down macromolecules into organic acids. We also investigated the metastability of benzoate in multiple mineral matrices. Benzoate was added to samples prior to irradiation and persisted up to 500 kGys of exposure. Our findings suggest that organic acids are likely a major component of organic material buried at depth on Mars.

Fox, A. C.↗

Milestone 1.2.15: Feasibility of In Situ Accelerated Aluminum Coupon Radiolysis by Synchrotron X-Rays

Extended dry storage of aluminum-clad spent nuclear fuel (ASNF) requires an assessment of the radiolytic generation of molecular hydrogen gas (H2) from the ASNF’s corrosion layers. H2 accumulation can potentially lead to storage canister embrittlement/rupture and the accumulation of flammable gas mixtures in accident scenarios. To date, computational models have been developed for the prediction of radiolytic H2 generation from samples exposed to lower absorbed dose regimes (up to ~3 MGy). However, greater accuracy is needed for higher absorbed doses (> 25 MGy) where the concentration of H2 ultimately reaches a steady-state. Data in this area is limited due to the amount of time taken (months) to accumulate such high gamma doses. Furthermore, a recent study observed radiation-induced damage to the surface of pre-corroded aluminum alloy coupons at high absorbed gamma doses. Despite this observation and its implications, there is currently no computational connection between the radiolytic formation of H2 and changes in the composition and morphology of the cladding’s corrosion layers with absorbed dose. To develop a better understanding of the processes and effects described above, the present study aimed to evaluate the feasibility of leveraging synchrotron x-ray capabilities for coupled accelerated irradiation and in situ surface characterization of ASNF alloys. To that end, National Synchrotron Light Source II (NSLS-II) beamtime was secured and a series of aluminum alloy 1100 (AA1100) wires, prepared under a variety of conditions, were interrogated using ex situ x-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques at Idaho National Laboratory (INL) and ex situ and in situ XRD capabilities at the NSLS-II x-ray powder diffraction (XPD) beamline. Results indicated that performing synchrotron XRD using the available XPD beamline configuration can provide sufficient radiation dose but cannot discern changes in the composition and morphology of sample corrosion layers. Additionally, ex situ XRD and SEM data from Idaho National Laboratory (INL) indicated that the pre-corrosion of AA1100 wires did not generate an appreciably thick corrosion layer, as compared with previous aluminum coupon studies. These thinner surface corrosion layers were not sufficient for detection by both ex situ and in situ synchrotron XRD, specifically under consideration of the NSLS-II XPD beamline’s configuration primarily capturing information from the sample’s bulk material, i.e., aluminum metal. In summary, the use of the NSLS-II XPD beamline for promoting accelerated radiolysis and in situ surface characterization is not appropriate for this program’s goals.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Multiscale Evaluation of Acetohydroxamic Acid (AHA) Radiolysis Under Used Nuclear Fuel Reprocessing Solvent System Conditions

Acetohydroxamic acid (AHA) has been proposed as an alternative agent for the selective separation of plutonium and neptunium from co-extracted uranium during the reprocessing of used nuclear fuel. However, the fundamental radiolytic behavior of this molecule under envisioned process conditions – i.e., acidic biphasic solvent systems – is not sufficiently understood to support process applications. Here we present a systematic irradiation study (steady-state gamma and time-resolved pulsed electron) into the radiolytic integrity of AHA and formation of degradation products in aqueous nitric acid (HNO3) solutions (0.2 M) in presence and absence of an organic phase, comprising current (tri-butyl phosphate - TBP) and future (N,N-di-(2-ethylhexyl)butyramide - DEHBA and di-2-ethylhexylisobutyramide - DEHiBA) reprocessing ligands dissolved in n-dodecane diluent. Experimental data are complimented by predictive multiscale model calculations for the elucidation of underpinning mechanisms.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Radiolysis of thermally dehydrated gibbsite

Aluminum hydroxide (gibbsite, Al (OH) 3 ) powders and their thermally dehydrated forms were rehydrated and irradiated with gamma rays to examine the effects of the collapse of the crystalline gibbsite structure as it is converted to alumina on the transport of precursors of molecular hydrogen to the surface. The amount of hydrogen gas, H 2 , production from irradiated gibbsite and its transition phases with adsorbed water increased substantially with increasing temperature for dehydration of the samples, up to a point. Furthermore, the production of H 2 for samples without water was considerably lower than the hydrated samples signifying the importance of surface water and the transport of precursors to the surface. EPR spectroscopy showed that the major radiolytic products are trapped electrons and related O – centers. Thermal gravimetric analysis (TGA) measurements of gibbsite dehydration established the temperatures of phase transitions from gibbsite to alumina. Changes to the surface and structure of gibbsite and its transition phases following irradiation were analyzed using nitrogen adsorption, powder X-ray diffraction (pXRD), Raman spectroscopy, electron paramagnetic resonance (EPR), and scanning electron microscopy (SEM). pXRD and Raman spectra showed amorphorization at about 300 °C, coupled to a substantial increase in specific surface area due to increasing porosity.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗