Search NASA⌕ Search

SEARCH · Search NASA

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Temperature estimation in a spatially inhomogeneous flame by diode laser absorption spectroscopy

A two-temperature (2T) model is proposed for estimating the temperature of a spatially inhomogeneous hot zone using single-beam diode laser absorption spectrometry. The proposed algorithm is based on fitting experimental absorption spectra by a linear combination of two database-simulated single-temperature spectra with different temperatures. The model efficiency is experimentally demonstrated when determining the temperature in different flame zones of a Wolfgard – Parker slot burner. The proposed 2T algorithm is used to find the maximum and minimum temperatures in different flame sections, which are compared with local temperatures in the same flame zones measured by the method of coherent anti-Stokes Raman scattering (CARS). It is shown that the maximum temperatures determined by the proposed 2T algorithm are in good agreement with CARS data in flame zones where high-temperature regions prevail. A good agreement between the minimum temperatures obtained by these two methods is also observed for predominantly cold zones. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Distributed fibre-optic temperature sensor for cryogenic applications based on detection of boson components of Raman light scattering

The possibility of designing a distributed fibre-optic sensor, allowing one to measure cryogenic temperatures (to liquid nitrogen boiling point), is experimentally demonstrated. The principle of operation of the sensor is based on measuring the intensity of boson peaks of Raman scattering in a fibre material, which are spaced by 1 to 3 THz from the probe frequency. The measurements are performed using a single-mode telecommunication fibre with a 15-μm-thick polyimide coating. The probe wavelength is 1.55 μm, the sensor spatial resolution is 4 m, and the averaging time is 60 s. Experiments are carried out in the temperature range of 75.6 – 79.6 K, with a temperature resolution of 0.5 K. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2020

Decreasing the amplitude of macroscopic quantum fluctuations in the case of transient SRS

It is shown experimentally that, under the conditions of transient stimulated Raman scattering, pumping by two successive orthogonally polarised laser pulses makes it possible to reduce the amplitude of macroscopic quantum energy fluctuations of a Stokes pulse by a factor of 4 in comparison with single-shot pumping. An energy dispersion of 0.9 % for the first Stokes component is obtained in hydrogen at a relative energy dispersion of ytterbium laser pulses of 0.4 %. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Spectrally selective fundamental core mode suppression in optical fibre containing absorbing rods

The feasibility of making a wavelength-selective fibre filter using fibre with absorbing rods in its silica cladding has been demonstrated theoretically for the first time. The technique described in this paper is of great practical interest for designing fibre lasers and amplifiers emitting at wavelengths where lasing is impeded by the presence of more energetically favourable radiative transitions in the active medium. In addition, the approach proposed here can be used for stimulated Raman scattering suppression. The unique feature of the fundamental core mode suppression mechanism examined is that there is a (bending) controlled spectral width of a region where excess losses are produced. (selection of papers presented at the international workshop on fibre lasers (20 – 24 September 2020, Novosibirsk))

36 MATERIALS SCIENCE↗
DOE OSTI2022

Observation of well-defined Kohn-anomaly in high-quality graphene devices at room temperature

Abstract Due to its ultra-thin nature, the study of graphene quantum optoelectronics, like gate-dependent graphene Raman properties, is obscured by interactions with substrates and surroundings. For instance, the use of doped silicon with a capping thermal oxide layer limited the observation to low temperatures of a well-defined Kohn-anomaly behavior, related to the breakdown of the adiabatic Born–Oppenheimer approximation. Here, we design an optoelectronic device consisting of single-layer graphene electrically contacted with thin graphite leads, seated on an atomically flat hexagonal boron nitride substrate and gated with an ultra-thin gold layer. We show that this device is optically transparent, has no background optical peaks and photoluminescence from the device components, and no generation of laser-induced electrostatic doping (photodoping). This allows for room-temperature gate-dependent Raman spectroscopy effects that have only been observed at cryogenic temperatures so far, above all the Kohn-anomaly phonon energy normalization. The new device architecture, by decoupling graphene optoelectronic properties from the substrate effects, allows for observing quantum phenomena at room temperature.

Materials Science↗
DOE OSTI2018

Revealing excitonic processes and chemical bonding in Mo S 2 by x-ray spectroscopy

Electron core-hole processes at absorption edges sport several signatures, primarily in the form of bound states and/or excitonic enhancement. Here, through analysis of the resonant-Raman Auger effect for the two-dimensional transition-metal dichalcogenide MoS 2 , we demonstrate that these effects have significant manifestations at the S K edge. We characterize two asymmetric excitonically enhanced edges: one at the fundamental band edge and one several electron volts above it following a second band gap that lies entirely within the unoccupied states, with the latter revealing an anomalous postcollision interaction effect. In conclusion, our interpretation is supported by comparison of both the photoemission valence-band spectrum and the S K-edge x-ray-absorption spectrum with electronic structure calculations and an ab initio solution of the Bethe-Salpeter equation that accurately accounts for the electron-core-hole interaction.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Optical Properties of Copper-Doped Lithium Niobate Crystals

We have studied the optical properties of copper-doped lithium niobate crystals using semiconductor light-emitting diodes and lasers emitting in the visible and ultraviolet spectral regions as excitation sources. The results demonstrate that, at an excitation frequency approaching the frequency of electronic absorption in copper ions, there is discrete resonance Raman scattering in the form of a frequency comb. The observed Raman satellites of discrete light scattering are due to polar longitudinal A{sub 1} optical modes of the lithium niobate single crystal. Under excitation by a light-emitting diode with a wavelength of 520 nm, we observe a sharp increase in discrete light scattering intensity in comparison with the photoluminescence excited by shorter wavelength excitation sources.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Thermalization of Photons in a Microcavity

A theoretical interpretation of the spectral condensation of photons in a microcavity based on solution of kinetic equations describing photon-gas thermalization as a result of Raman scattering from an atomic-gas thermostat is proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

On Precision Measurement of the Frequency of the 1{sup 1}S–2{sup 3}S Forbidden Transition of a Helium Atom

The possibility is demonstrated of a precision frequency measurement for the 1{sup 1}S{sub 0}−2{sup 3}S{sub 1} forbidden transition (at 62.6 nm) of a helium atom using the stimulated Raman scattering method. The 1{sup 1}S{sub 0} singlet state is the ground state of {sup 4}He, while the metastable 2{sup 3}S{sub 1} state has the lowest energy in the triplet part of the spectrum ({sup 4}He*). The transition has a very small natural width, which allows us to consider it as a possible reference for creation of a frequency standard in the vacuum ultraviolet region.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2018

Enhancement of Fluorescence and Raman Scattering in Cyanine-Dye Molecules on the Surface of Silicon-Coated Silver Nanoparticles

A method of formation of a composite structure based on silver nanoparticles and a thin protective silicon film (AgNPs/Si) is developed. Enhancement of the fluorescence and Raman scattering in cyaninedye molecules deposited onto the formed nanostructure is observed. The optical properties and morphology stability of particles that are in contact with cyanine-dye solutions in organic solvents are studied. It is shown that the AgNPs/Si composite structure can be multiply used as an SERS-active surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Withdrawal of Electrodynamical Forbiddance and Peculiarities of the SERS Spectra in Fullerene C{sub 70}

It is demonstrated that in fullerene C{sub 70}, which can be considered as a deformed fullerene C{sub 60} in some mean sense there is a withdrawal of an Electrodynamical forbiddance of a strong quadrupole light-molecule interaction, which is realized in the fullerene C{sub 60}. This situation occurs because of the reduction of symmetry of C{sub 60} from the icosahedral symmetry group Y{sub h} to the group D{sub 5h}. The withdrawal results in appearance of the lines in the SERS spectra of C{sub 60}, which are forbidden in usual Raman scattering and are active in the infrared absorption spectra. The experimentally measured SERS spectra of C{sub 70} demonstrates existence of such lines that strongly confirms our ideas about the dipole-quadrupole SERS mechanism.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2018

Optical Properties of Nonstoichiometric Tantalum Oxide TaO{sub x} (x < 5/2) According to Spectral-Ellipsometry and Raman-Scattering Data

Optical properties of amorphous nonstoichiometric tantalum-oxide films of variable composition (TaO{sub x}, x = 1.94–2.51) in the spectral range of 1.12–4.96 eV, obtained by ion-beam sputtering-deposition of metallic tantalum at different partial oxygen pressures (0.53–9.09 × 10{sup –3} Pa), have been investigated. It is shown by spectral ellipsometry that the character of dispersion of the absorption coefficient and refractive index in TaO{sub x} of variable composition suggests that light-absorbing films with dispersion similar to that in metals are formed at oxygen pressures in the growth chamber below 2.21 × 10{sup –3} Pa, whereas transparent films with dielectric dispersion are formed at pressures above 2.81 × 10{sup –3} Pa. According to the data of quantumchemical simulation, the absorption peak at a photon energy of 4.6 eV in TaO{sub x} observed in the absorptioncoefficient dispersion spectrum is due to oxygen vacancy. The peak in the Raman-scattering spectra of TaO{sub x} films with metallic dispersion at frequencies of 200–230 cm{sup –1} is presumably related to tantalum nanoclusters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Photochromic Properties and Surface Enhanced Raman Scattering Spectra of Indoline Spiropyran in Silver-Based Nanocomposite Films

The structure and photochromic transformations of composite organometallic nanosystems composed of Ag nanoparticles covered with a layer of indoline-spiropyran (ISP) molecules from solutions were studied by spectrophotometry, surface Raman scattering spectroscopy (SERS) and quantum chemistry. Analysis of experimental data showed that studied nanostructured systems have photochromic properties, manifested in the reversible photo-induced changes both of the electronic-absorption spectra and of the relative intensity of the SERS bands. The open form of ISP, formed in the organometallic nanostructured film as a result of photochromic transformations, has an adsorption geometry, and, possibly, a conformation different from that formed as a result of chemisorption of ISP molecules on silver colloids.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Quasi-Elastic Light Scattering in Congruent Lithium Niobate Crystals

Raman scattering spectra in the frequency range of 5–75 cm{sup –1} in lithium niobate samples with various structural imperfections were obtained. It is shown that the intensity of quasi-elastic light scattering on the wing of the Rayleigh line demonstrates an exponential dependence on the concentration of large-scale defects in the samples. Calibration curves for the intensity of quasi-elastic scattering dependence at low frequencies on the acoustic quality factor are constructed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Polarized Raman Scattering in Silicon Layers on Sapphire

The intensities of polarized components of Raman light scattering are measured for different crystallographic directions in epitaxial layers of silicon on sapphire. The experiment shows that the scattered radiation has a strong depolarized component, which is directly related to the occurrence of defects in the epitaxial layer. A model of an ensemble of crystallites is proposed to describe a defect crystal silicon layer on sapphire. It is shown that the characteristic value of disordering of crystalline domains in the epitaxial layer can be determined from the ratio between the intensities of the polarized and depolarized components. From measurements of the Raman scattering intensity as a function of the crystallographic direction, the anisotropy of the Raman scattering tensor is determined. Numerical values for two samples are obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Rapid Preparation of Large-Area Densely Packed Plasmonic Hot-Spots for Reliable Sers Sensing

A facile, efficient and time-saving strategy is proposed to obtain large-area and reliable surface-enhanced Raman scattering (SERS) substrates via artificial heat-treatment of Au nanoparticles or ultrathin Au films sputtered on the silica substrates. Excellent Raman enhancements with the detection limitation down to 10{sup –9} mol/L are obtained due to the highly-dense plasmonic hot-spots and strong plasmons near-field coupling. Decreased intensity of Raman peaks with the increased sputtering time of Au nanoparticles or ultrathin films mainly originates from the excited and hybridized coupling of multiple surface plasmons. The simple fabrication strategy and superior performance make these substrates promising candidates for the development of inexpensive and reliable SERS substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Study of Thermal and Coherent A{sub 1g} Phonons in Bismuth Telluride

Totally symmetric A{sub 1g} phonons are studied for the equilibrium and coherent states of a Bi{sub 2}Te{sub 3} lattice. Equilibrium phonons were investigated in the frequency domain by the method of spontaneous Raman scattering, whereas coherent phonons were studied by the method of active femtosecond spectroscopy in the time domain. In the latter case, femtosecond laser pulses were used both for generating and detecting coherent A{sub 1g} phonons having a well-defined phase allowing the selective optical control of the lattice dynamics. A comparison of the results obtained in the frequency and time domains suggests that diagonal and nondiagonal elements of the density matrix of lattice excitations relax with the same characteristic time to the equilibrium and zero values, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Fabrication of Silicon Nanostructures for Application in Photonics

Silicon is the primary material of modern electronics. It also possesses bright potentials for applications in nanophotonics. At the same time optical properties of bulk silicon do not fully satisfy requirements imposed on them. Fortunately, properties of silicon nanostructures strongly depend on their shapes and sizes. In this regard, of special interest is the development of fabrication and post-processing methods of silicon nanostructures. In this contribution we propose a method for silicon nanostructures fabrication combining the technique of high-vacuum deposition with metal-assisted chemical etching. SEM images as well as ellipsometry, Raman scattering and optical spectroscopy data prove that the desired structural changes were obtained.

36 MATERIALS SCIENCE↗