Search NASA⌕ Search

SEARCH · Search NASA

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

The Influence of Pressure on Flame-Flow Characteristics of a Reacting Jet in Crossflow

This work experimentally investigates the effects of elevated combustor pressures on the characteristics of a lean premixed reacting methane/air jet injected into a lean vitiated crossflow using a 12.7 mm axial jet. Experiments were conducted in an axially staged combustor, which implements a reacting jet in crossflow (RJIC) configuration and operates over a pressure range of 1–5 atmospheres. Simultaneous CH* chemiluminescence and particle image velocimetry (PIV) are used to study the flow field and flame behavior. The results show that the reacting jet trajectory exhibits greater penetration with elevated pressure, which is a novel finding compared to available data in the literature. However, the flame liftoff point and ignition delay time both decreased with elevated pressure, which was attributed to decreased vorticity along the flame boundary which corresponds to increased Damköhler numbers (Da). Emissions measurements confirm the NOx increase with pressure as reported in the literature for single-stage gas turbine combustors. Concurrently, emission measurements for the staged configuration show the strong NOx benefit of the RJIC system: the data prove a reduction of global outlet emission levels at elevated pressure with the axially staged configuration. Here, the axial emission reduction was attributed to the decreasing liftoff at elevated pressure levels. Hence, the research emphasizes that the flame and emission characteristics are coupled; they are not only dependent on the geometric parameters and momentum flux ratios but are also a function of pressure.

03 NATURAL GAS↗

REACT: Alternatives to Critical Materials in Magnets

REACT Project: The 14 projects that comprise ARPA-E’s REACT Project, short for “Rare Earth Alternatives in Critical Technologies”, are developing cost-effective alternatives to rare earths, the naturally occurring minerals with unique magnetic properties that are used in electric vehicle (EV) motors and wind generators. The REACT projects will identify low-cost and abundant replacement materials for rare earths while encouraging existing technologies to use them more efficiently. These alternatives would facilitate the widespread use of EVs and wind power, drastically reducing the amount of greenhouse gases released into the atmosphere.

ARPA-E↗

Effects of radiative heat transfer on the turbulence structure in inert and reacting mixing layers

We use large-eddy simulation to study the interaction between turbulence and radiative heat transfer in low-speed inert and reacting plane temporal mixing layers. An explicit filtering scheme based on approximate deconvolution is applied to treat the closure problem arising from quadratic nonlinearities of the filtered transport equations. In the reacting case, the working fluid is a mixture of ideal gases where the low-speed stream consists of hydrogen and nitrogen and the high-speed stream consists of oxygen and nitrogen. Both streams are premixed in a way that the free-stream densities are the same and the stoichiometric mixture fraction is 0.3. The filtered heat release term is modelled using equilibrium chemistry. In the inert case, the low-speed stream consists of nitrogen at a temperature of 1000 K and the highspeed stream is pure water vapour of 2000 K, when radiation is turned off. Simulations assuming the gas mixtures as gray gases with artificially increased Planck mean absorption coefficients are performed in which the large-eddy simulation code and the radiation code PRISSMA are fully coupled. In both cases, radiative heat transfer is found to clearly affect fluctuations of thermodynamic variables, Reynolds stresses, and Reynolds stress budget terms like pressure-strain correlations. Source terms in the transport equation for the variance of temperature are used to explain the decrease of this variance in the reacting case and its increase in the inert case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advances in imaging of chemically reacting flows

Many important chemically reacting systems are inherently multi-dimensional with spatial and temporal variations in the thermochemical state, which can be strongly coupled to interactions with transport processes. Fundamental insights into these systems require multi-dimensional measurements of the thermochemical state as well as fluid dynamics quantities. Laser-based imaging diagnostics provide spatially and temporally resolved measurements that help address this need. The state of the art in imaging diagnostics is continually progressing with the goal of attaining simultaneous multi-parameter measurements that capture transient processes, particularly those that lead to stochastic events, such as localized extinction in turbulent combustion. Development efforts in imaging diagnostics benefit from advances in laser and detector technology. This article provides a perspective on the progression of increasing dimensionality of laser-based imaging diagnostics and highlights the evolution from single-point measurements to 1D and 2D multi-parameter imaging and 3D high-speed imaging. This evolution is demonstrated using highlights of laser-based imaging techniques in combustion science research as an exemplar of a complex multi-dimensional chemically reacting system with chemistry–transport coupling. Imaging diagnostics impact basic research in other chemically reacting systems as well, such as measurements of near-surface gases in heterogeneous catalysis. The expanding dimensionality of imaging diagnostics leads to larger and more complex datasets that require increasingly demanding approaches to data analysis and provide opportunities for increased collaboration between experimental and computational researchers in tackling these challenges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A fourth-order adaptive mesh refinement algorithm for the multicomponent, reacting compressible Navier–Stokes equations

In this study, we present a fourth-order in space and time block-structured adaptive mesh refinement algorithm for the compressible multicomponent reacting Navier–Stokes equations. The algorithm uses a finite-volume approach that incorporates a fourth-order discretisation of the convective terms. The time-stepping algorithm is based on a multi-level spectral deferred corrections method that enables explicit treatment of advection and diffusion coupled with an implicit treatment of reactions. The temporal scheme is embedded in a block-structured adaptive mesh refinement algorithm that includes subcycling in time with spectral deferred correction sweeps applied on levels. Here we present the details of the multi-level scheme paying particular attention to the treatment of coarse–fine boundaries required to maintain fourth-order accuracy in time. We then demonstrate the convergence properties of the algorithm on several test cases including both non-reacting and reacting flows. Finally we present simulations of a vitiated dimethyl ether jet in 2D and a turbulent hydrogen jet in 3D, both with detailed kinetics and transport.

97 MATHEMATICS AND COMPUTING↗

Retrofit Energy Analysis and Central Thermal modeling (REACT) v1.0

REACT is a website designed to simplify the analysis and decision-making process for retrofitting existing central plant heating and cooling systems with advanced heat pump technologies. The tool evaluates the technical and economic viability of replacing traditional boilers with various options including water-to-water or air-to-water heat pumps, which can provide efficient and lower-cost heating and cooling. It allows users to compare current central plant configurations with retrofit scenarios, assessing energy consumption, life-cycle costs, and environmental impact. Retrofitting traditional boiler and chiller systems with water-to-water or air-to-water heat pumps can significantly reduce energy consumption and lower lifecycle costs. The REACT provides: User-Friendly Tools: A user friendly web interface for quick, intuitive analysis accessible to non-experts. Advanced Modeling: A Python-powered engine for detailed parametric studies, optimization, and research applications. Comprehensive Analysis: Lifecycle cost evaluation, energy consumption modeling, and environmental impact assessment. Visual Insights: A variety of plots to visualize system performance and design trade-offs. The engine for the website (REACT) bases on several Python libraries, and the website will be hosted on an ETA server.

Kim, Donghun [Lawrence Berkeley National Laborator↗

Development of a Reduced-Order Model for Reacting Gas-Solids Flow using Proper Orthogonal Decomposition

This report summarizes the objectives, tasks and accomplishments made during the three year duration of this research project. The report presents the results obtained by applying advanced computational techniques to develop reduced-order models (ROMs) in the case of reacting multiphase flows based on high fidelity numerical simulation of gas-solids flow structures in risers and vertical columns obtained by the Multiphase Flow with Interphase eXchanges (MFIX) software. The research includes a numerical investigation of reacting and non-reacting gas-solids flow systems and computational analysis that will involve model development to accelerate the scale-up process for the design of fluidization systems by providing accurate solutions that match the full-scale models. The computational work contributes to the development of a methodology for obtaining ROMs that is applicable to the system of gas-solid flows. Finally, the validity of the developed ROMs is evaluated by comparing the results against those obtained using the MFIX code. Additionally, the robustness of existing POD-based ROMs for multiphase flows is improved by avoiding non-physical solutions of the gas void fraction and ensuring that the reduced kinetics models used for reactive flows in fluidized beds are thermodynamically consistent.

42 ENGINEERING↗

Implementing General Framework in MFIX for Radiative Heat Transfer in Gas-Solid Reacting Flows (Final Report)

The current knowledge gap between radiation and multiphase flow communities is the greatest barrier to developing predictive models for radiation, the dominant mode of heat transfer in gas-solid reacting flows. The objectives of this research are (1) to develop and implement a general framework to support the integration of modern radiation models for gas-solid reacting flows; (2) to implement a methodology for developing new multiphase radiation models with accuracy and efficiency commensurate with their importance in energy-related applications, and (3) to demonstrate the accuracy and efficiency of the radiation models under typical gas-solid reacting flow conditions.

20 FOSSIL-FUELED POWER PLANTS↗

Towards Predictive Reacting Flow LES

Grid dependency and the interaction of numerical errors with those from physical models can negatively impact the predictive capabilities of the traditional large eddy simulation (LES) approach. This paper attempts to address these issues for the simulation of turbulent reacting flows, where the canonical problem of a temporally evolving reacting jet is used as a test case. The impact of implicit and explicit filtering of the governing system of equations, and the impact of removing grid dependency from physical models through application of a constant filter width, is assessed. Four different grid resolutions are employed in the study. Differences are experienced in mean velocity and temperature profiles with grid resolution refinement when using the traditional implicit filtering approach, demonstrating the grid dependency of the obtained solutions. These differences are substantially mitigated by fixing the filter width used in physical models to a constant value, as the grid resolution is refined. Explicit filtering utilizing discrete filters reduces these differences even further, but to a smaller degree. This latter improvement comes at a very substantial computational cost. Higher Reynolds number cases need to be studied, where the LES resolution is far from that of a DNS, in order for a more conclusive assessment of the benefit of the explicit filtering approach to be made. However, even if explicit filtering is found to have a large positive impact on the predictive capabilities of reacting flow LES, its computational cost is likely to prevent it from being routinely applied to large, complex geometries, at least for the case where discrete filters are used.

Cocks, Peter A.↗

Characteristics of a Reacting Jet-in-Crossflow at Elevated Pressures

Flow behavior of a reacting methane jet injected normal to a lean vitiated crossflow (RJIC) is experimentally characterized using a high pressure axial staged facility. The focus of this investigation is to analyze the flow dynamic of the reacting jet as it interacts with a lean vitiated crossflow at 5atm by examining several reacting jet conditions varying the momentum flux ratio (J) and the equivalence ratio (Φ∞) of the vitiated crossflow. Vitiated crossflow temperatures ranged from 1675K to 1825K, to simulate operate conditions of a practical combustor system. The global equivalent ratio (Φ∞) at the headend of the facility ranged from 0.57 to 0.70 to attain the desired engine temperatures. RJIC flow dynamics were characterized utilizing measurements acquired from flow visualization techniques such as OH* chemiluminescence.

03 NATURAL GAS↗

A computer program for two-dimensional and axisymmetric nonreacting perfect gas and equilibrium chemically reacting laminar, transitional and-or turbulent boundary layer flows

A computer program is described in detail for laminar, transitional, and/or turbulent boundary-layer flows of non-reacting (perfect gas) and reacting gas mixtures in chemical equilibrium. An implicit finite difference scheme was developed for both two dimensional and axisymmetric flows over bodies, and in rocket nozzles and hypervelocity wind tunnel nozzles. The program, program subroutines, variables, and input and output data are described. Also included is the output from a sample calculation of fully developed turbulent, perfect gas flow over a flat plate. Input data coding forms and a FORTRAN source listing of the program are included. A method is discussed for obtaining thermodynamic and transport property data which are required to perform boundary-layer calculations for reacting gases in chemical equilibrium.

Miner, E. W.↗

Acoustic imaging for diagnostics of chemically reacting systems

The concept of local diagnostics, in chemically reacting systems, with acoustic imaging is developed. The elements of acoustic imaging through ellipsoidal mirrors are theoretically discussed. In a general plan of the experimental program, the first system is chosen in these studies to be a simple open jet, non premixed turbulent flame. Methane is the fuel and enriched air is the oxidizer. This simple chemically reacting flow system is established at a Reynolds number (based on cold viscosity) of 50,000. A 1.5 m diameter high resolution acoustic mirror with an f-number of 0.75 is used to map the acoustic source zone along the axis of the flame. The results are presented as acoustic power spectra at various distances from the nozzle exit. It is seen that most of the reaction intensity is localized in a zone within 8 diameters from the exit. The bulk reactions (possibly around the periphery of the larger eddies) are evenly distributed along the length of the flame. Possibilities are seen for locally diagnosing single zones in a multiple cluster of reaction zones that occur frequently in practice. A brief outline is given of the future of this work which will be to apply this technique to chemically reacting flows not limited to combustion.

Ramohalli, K.↗

Turbulence characteristics of an axisymmetric reacting flow

Turbulent sudden expansion flows are of significant theoretical and practical importance. Such flows have been the subject of extensive analytical and experimental study for decades, but many issues are still unresolved. Detailed information on reacting sudden expansion flows is very limited, since suitable measurement techniques have only been available in recent years. The present study of reacting flow in an axisymmetric sudden expansion was initiated under NASA support in December 1983. It is an extension of a reacting flow program which has been carried out with Air Force support under Contract F33615-81-K-2003. Since the present effort has just begun, results are not yet available. Therefore a brief overview of results from the Air Force program will be presented to indicate the basis for the work to be carried out.

Gould, R. D.↗

A finite volume method for the calculation of compressible chemically reacting flows

Several efficient pseudo time techniques have been developed for calculating steady state chemically reacting flows. The techniques include the implicit treatment of the chemical source term, point implicit multiple grid accelerator and a constant CFL condition. It turns out that these methods can be viewed as ways of rescaling the equations in time such that all chemical and convective phenomena evolve at comparable pseudo time scales. Consequently the number of iterations needed to solve reacting problems is approximately the same as for non-reacting problems. The techniques are demonstrated for a simple dissociation model and a nontrivial H2 - Air combustion model.

Bussing, T. R. A.↗

A new PNS code for three-dimensional chemically reacting flows

A new parabolized Navier-Stokes (PNS) code has been developed to compute the hypersonic, viscous, chemically reacting flow fields around three-dimensional bodies. The flow medium is assumed to be a multicomponent mixture of thermally perfect but calorically imperfect gases. The new PNS code solves the gasdynamic and species conservation equations in a coupled manner using a noniterative, implicit, approximately-factored, finite-difference algorithm. The space-marching method is made well-posed by special treatment of the streamwise pressure gradient term. The code has been used to compute hypersonic laminar flow of chemically reacting air over cones at angles of attack. The results of the computations are compared with the results of reacting boundary-layer computations and show excellent agreement.

Prabhu, D. K.↗

Extension of a semi-implicit shock-capturing algorithm for 3-D fully coupled, chemically reacting flows in generalized coordinates

A semiimplicit high-resolution shock-capturing method for multidimensional systems of hyperbolic conservation laws with stiff source terms has been developed by Yee and Shinn (1987). The goal of this work is to extend this method to solve the three-dimensional fully coupled Navier-Stokes equations for a hypersonic chemically reacting flow in generalized coordinates. In this formulation, the global continuity equation was replaced by all the species continuity equations. The shock-capturing technique is a second-order-accurate, symmetric total-variation-diminishing method which accounts fully and directly for the coupling among the fluid and all the species. To verify the current approach, it was implemented into an existing computer code which contained the MacCormack method. Test results for a five-species reacting flow are shown to be oscillation-free around the shock, and the time spent per iteration only doubles when compared to the result using classical way of supplying numerical dissipation. The extra computation is more than justified by the elimination of spurious oscillation and nonlinear instability associated with the classical shock-capturing schemes in computing hypersonic reacting flows.

Shinn, J. L.↗

Supersonic reacting internal flow fields

The national program to develop a trans-atmospheric vehicle has kindled a renewed interest in the modeling of supersonic reacting flows. A supersonic combustion ramjet, or scramjet, has been proposed to provide the propulsion system for this vehicle. The development of computational techniques for modeling supersonic reacting flow fields, and the application of these techniques to an increasingly difficult set of combustion problems are studied. Since the scramjet problem has been largely responsible for motivating this computational work, a brief history is given of hypersonic vehicles and their propulsion systems. A discussion is also given of some early modeling efforts applied to high speed reacting flows. Current activities to develop accurate and efficient algorithms and improved physical models for modeling supersonic combustion is then discussed. Some new problems where computer codes based on these algorithms and models are being applied are described.

Drummond, J. Philip↗

Modeling of supersonic reacting flow fields

A detailed understanding of the scramjet combustor flow field is critical to the achievement of a successful design. Even though the combustor flow field is quite complex, it can be realistically viewed as a collection of spatially developing and reacting supersonic mixing layers that are initially discrete, but that ultimately merge into larger more complex zones. These mixing layers begin downstream of a set of fuel injectors that introduce gaseous hydrogen in both a parallel and transverse direction into a supersonic air stream entering from the engine inlet. The behavior of the initial portion of the combustor flow, in the mixing layers near the fuel injectors, appears to be most critical, since this is where the mechanism for efficient high speed mixing must be established to achieve the required degree of combustion downstream. Because of the structure of the flow field in this initial portion of the combustor, a single supersonic, spatially developing and reacting mixing layer serves as an excellent physical model for the overall flow field. Even though this reacting mixing layer flow is geometrically simple, it can still be made to retain all of the fluid mechanical and chemical complexities present in the actual combustor flow field.

Drummond, J. P.↗