Search NASA⌕ Search

SEARCH · Search NASA

Results for “REACTOR CORE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Research on plasma core reactors

Experiments and theoretical studies are being conducted for NASA on critical assemblies with one-meter diameter by one-meter long low-density cores surrounded by a thick beryllium reflector. These assemblies make extensive use of existing nuclear propulsion reactor components, facilities, and instrumentation. Due to excessive porosity in the reflector, the initial critical mass was 19 kg U(93.2). Addition of a 17 cm thick by 89 cm diameter beryllium flux trap in the cavity reduced the critical mass to 7 kg when all the uranium was in the zone just outside the flux trap. A mockup aluminum UF6 container was placed inside the flux trap and fueled with uranium-graphite elements. Fission distributions and reactivity worths of fuel and structural materials were measured. Finally, an 85,000 cu cm aluminum canister in the central region was fueled with UF6 gas and fission density distributions determined. These results are to be used to guide the design of a prototype plasma core reactor which will test energy removal by optical radiation.

Jarvis, G. A.↗
NASA NTRS1991

Wire core reactor for NTP

The development of the wire core system for Nuclear Thermal Propulsion (NTP) that took place from 1963 to 1965 is discussed. A wire core consists of a fuel wire with spacer wires. It's an annular flow core having a central control rod. There are actually four of these, with beryllium solid reflectors on both ends and all the way around. Much of the information on the concept is given in viewgraph form. Viewgraphs are presented on design details of the wire core, the engine design, engine weight vs. thrust, a technique used to fabricate the wire fuel element, and axial temperature distribution.

Harty, R. B.↗
NASA NTRS1976

Plasma core reactor simulations using RF uranium seeded argon discharges

Experimental results are described in which pure uranium hexafluoride was injected into an argon-confined, steady-state, RF-heated plasma to investigate characteristics of plasma core nuclear reactors. The 80 kW (13.56 MHz) and 1.2 MW (5.51 MHz) rf induction heater facilities were used to determine a test chamber flow scheme which offered best uranium confinement with minimum wall coating. The cylindrical fused-silica test chamber walls were 5.7-cm-ID by 10-cm-long. Test conditions included RF powers of 2-85 kW, chamber pressures of 1-12 atm, and uranium hexafluoride mass-flow rates of 0.005-0.13 g/s. Successful techniques were developed for fluid-mechanical confinement of RF-heated plasmas with pure uranium hexafluoride injection.

Roman, W. C.↗
NASA NTRS2002

Fissioning Plasma Core Reactor

Institute for Scientific Research, Inc. (ISR) research program consist of: 1.Study core physics by adapting existing codes: MCNP4C - Monte Carlo code; COMBINE/VENTURE - diffusion theory; SCALE4 - Monte Carlo, with many utility codes. 2. Determine feasibility and study major design parameters: fuel selection, temperature and reflector sizing. 3. Study reactor kinetics: develop QCALC1 to model point kinetics; study dynamic behavior of the power release.

Albright, Dennis↗
NASA NTRS1972

Gamma heating in reflector heat shield of gas core reactor

Heating rate measurements made in a mock-up of a BeO heat shield for a gas core nuclear rocket engine yields results nominally a factor of two greater than calculated by two different methods. The disparity is thought to be caused by errors in neutron capture cross sections and gamma spectra from the low cross-section elements, D, O, and Be.

Lofthouse, J. H.↗
NASA NTRS1972

Post impact behavior of mobile reactor core containment systems.

In the future, nuclear assemblies containing fission products will be transported at high speeds. An example is a reactor supplying power to a large subsonic airplane. In this case an accident can occur resulting in a ground impact at speeds up to 1000 ft/sec. This paper analyzes the containment vessel temperatures after impact and attempts to understand the design variables that affect the post impact survival of the system. The heat transfer analysis includes conduction, radiation, and convection in addition to the core material heats of fusion and vaporization under partial-burial conditions. Also, included is the fact that fission products vaporize and transport radially outward and condense on cooler surfaces, resulting in a moving heat source.

Puthoff, R. L.↗
NASA NTRS1962

Thermal and Criticality Analysis of the Plasma Core Reactor

Radiative heat transfer to the propellant and reactor criticality for a fissionable gaseous rocket engine are analyzed to determine their interdependence. The necessity for propellant thicknesses of approximately 1-3 m due to poor thermal absorption properties of hydrogen significantly affects reactor critical radius and mass. The two primary adverse effects are: (1) increased absorption in the reflector- moderator for a given reflector thickness and (2) poor utilization of thermal neutrons by the core due to the lower geometrical view factor of the core for the reflector walls. In fact, there is a minimum core radius at a particular propellant thickness which allows the system to “go” critical. Engine performance is limited primarily to two regions of operation: the first, a specific impulse of approximately 1550 sec at a thrust level of 2 x 10(exp 6) lb. and second, a specific impulse of approximately 2200 sec at a thrust level of 5.3 x 10(exp 6) lb.

Rocket engine↗
NASA NTRS1971

Generation of a uranium plasma at near gaseous core reactor conditions.

A constricted sliding spark discharge is used to generate a high density, high temperature uranium plasma. Uranium particle densities up to 10 to the 20th power per cu cm are obtained over a temperature range of 30,000 to 50,000 K. The device consists of a capillary discharge channel lined with pressed and sintered UO2. A 250 joule capacitor bank is discharged into the channel, producing a plasma of 10-20 microsec duration. Spectroscopic observations are made over the spectral range of 1300 to 2500 A.

Davis, J. F., III↗
NASA NTRS1971

Reactor core length, externally configured thermionic converter.

Results of testing a converter having an external emitter configuration for 190 hours using RF induction heating. The converter was assembled with a rhenium emitter, 25.4 cm long, having a 91.2 sq cm emitting area, and a niobium collector with a molybdenum coating to improve its electronic property. The collector was water-cooled. The test included: static power output measurements, dynamic characteristics, and the effects of the temperature distribution along the emitter. The maximum power output achieved from the converter at an emitter temperature of 1942 K was 178 W at 0.48 V output, with a power density of 1.95 W/sq cm and an efficiency of 5.5%. The static characteristics also indicated that, with a constant power input, the converter power output does not vary with the output voltage as a result of self-adjustment of the emitter temperature. An investigation of the effects of the temperature distribution along the emitter length showed a 33% improvement in the converter output power with a flattening of the emitter temperature.

Shimada, K.↗
NASA NTRS1973

An evolutionary approach for a compact-split-core reactor

An economical approach for advanced reactor power development is presented, and systems that result from the several stages of this plan are described. The development starts with a highly modularized heat pipe, radioisotopic design and evolves into a low specific weight high performance reactor system.

Breitwieser, R.↗
NASA NTRS1973

An evolutionary approach for a compact-split-core reactor.

An economical approach for advanced reactor power development is presented, and systems that result from the several stages of this plan are described. The development starts with a highly modularized heat-pipe, radioisotopic design and evolves into a low-specific-weight, high-performance reactor system.

Breitwieser, R.↗
NASA NTRS1974

Diagnostics of seeded RF plasmas: An experimental study related to the gaseous core reactor

Measurements of the temperature profiles in an RF argon plasma were made over magnetic field intensities ranging from 20 amp turns/cm to 80 amp turns/cm. The results were compared with a one-dimensional numerical treatment of the governing equations and with an approximate closed form analytical solution that neglected radiation losses. The average measured temperatures in the plasma compared well with the numerical treatment, though the experimental profile showed less of an off center temperature peak than predicted by theory. This may be a result of the complex turbulent flow pattern present in the experimental torch and not modeled in the numerical treatment. The radiation term cannot be neglected for argon at the power levels investigated. The closed form analytical approximation that neglected radiation led to temperature predictions on the order of 1000 K to 2000 K higher than measured or predicted by the numerical treatment which considered radiation losses.

Thompson, S. D.↗