Search NASA⌕ Search

SEARCH · Search NASA

Results for “REATTACHED FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Improvement of the second- and third-moment modeling of turbulence: A study of Reynolds-stress closure model

Four parts of the Reynolds-stress closure modeling are reported: (1) improvement of the k and epsilon equaitons; (2) development of the third-moment transport equation; (3) formulation of the diffusion coefficient of the momentum equation by using the algebraic-stress model of turbulence; and (4) the application of the Reynolds-stress model to a heat exchanger problem. It was demonstrated that the third-moment transport model improved the prediction of the triple-velocity products in the recirculating and reattaching flow regions in comparison with the existing algebraic models for the triple-velocity products. Optimum values for empirical coefficients are obtained for the prediction of the backward-facing step flows. A functional expression is derived for the coefficient of the momentum diffusion by employing the algebraic-stress model. The second-moment closure is applied to a heat transfer problem. The computations for the flow in a corrugated-wall channel show that the second-moment closure improves the prediction of the heat transfer rates by 30% over the k - epsilon model.

Amano, R. S.↗
NASA NTRS1988

Aerodynamic pressures and heating rates on surfaces between split elevons at Mach 6.6

An aerothermal study was performed in the Langley 8-Foot High Temperature Tunnel at Mach number 6.6 to define the pressures and heating rates on the surfaces between split elevons similar to those used on the Space Shuttle. Tests were performed with both laminar and turbulent boundary layers on the wing surface upstream of the elevons. The flow in the chordwise gap between the elevons was characterized by flow separation at the gap entrance and flow reattachment at a depth into the gap inversely proportional to the gap width. The gap pressure and heating rate increased significantly with decrease of elevon gap width, and the maximum gap heating rate was proportional to the maximum gap pressure. Correlation of the present results indicate that the gap heating was directly proportional to the elevon windward surface pressure and was not dependent upon whether the boundary layer on the windward elevon surface was laminar or turbulent.

Hunt, L. Roane↗
NASA NTRS1993

Turbulence modeling for complex hypersonic flows

The paper presents results of calculations for a range of 2D turbulent hypersonic flows using two-equation models. The baseline models and the model corrections required for good hypersonic-flow predictions will be illustrated. Three experimental data sets were chosen for comparison. They are: (1) the hypersonic flare flows of Kussoy and Horstman, (2) a 2D hypersonic compression corner flow of Coleman and Stollery, and (3) the ogive-cylinder impinging shock-expansion flows of Kussoy and Horstman. Comparisons with the experimental data have shown that baseline models under-predict the extent of flow separation but over-predict the heat transfer rate near flow reattachment. Modifications to the models are described which remove the above-mentioned deficiencies. Although we have restricted the discussion only to the selected baseline models in this paper, the modifications proposed are universal and can in principle be transferred to any existing two-equation model formulation.

Huang, P. G.↗
NASA NTRS1993

Unsteady aerodynamic models for maneuvering aircraft

Forced oscillation tests over a large angle-of-attack range for an F-18 model are conducted in the NASA Langley 12-foot low-speed tunnel. The resulting dynamic longitudinal data are analyzed with an unsteady aerodynamic modeling method based on Fourier functional analysis and the indicial formulation. The method is extensively examined and improved to automate the calculation of model coefficients, and to evaluate more accurately the indicial integral. The results indicate that the general model equation obtained from harmonic test data in a range of reduced frequency is capable of accurately modeling the nonlinear responses with large hysteresis effect, except in the region where a delayed flow reattachment occurs at low angles of attack in down strokes. The indicial formulation is used to calculate the response to harmonic motion, harmonic ramp motion, constant-rate pitching motion and smaller-amplitude harmonic motion. The results show that more accurate results can be obtained when the motion starts from a low angle of attack where hysteresis effect is not important.

Hu, Chien-Chung↗
NASA NTRS1993

Supersonic flow and shock formation in turbine tip gaps

Shock formation due to overexpansion of supersonic flow at the inlet to the tip clearance gap of a turbomachine has been studied. As the flow enters the tip gap, it accelerates around the blade pressure-side corner creating a region of minimum static pressure. The 'free streamline' separates from the wall at the corner; and, for Mach numbers greater than about 1.3, it curves back to intersect the blade tip. At this point, the freestream flow is abruptly turned parallel to the surface, giving rise to an oblique shock. The results are consistent with compressible sharp-edged orifice flow calculations found in the literature and with the theory of oblique shock wave formation in supersonic flow over a wedge. For freestream Mach numbers of 1.4 to 1.8, wave angles are 43 to 54 deg, and turning angles are 9 to 20 deg; as the Mach number increases, the angle of turn also increases. It appears that in a turbine, after separating from the inlet corner, the flow reattaches on the blade tip and an oblique shock is formed at 0.4-1.4 tip gap heights into the clearance gap. The resulting shock-boundary layer interaction may contribute to further enhancement of already high heat transfer to the blade tip in this region. This in turn could lead to higher blade temperatures and adversely affect blade life and turbine efficiency.

Moore, John↗
NASA NTRS1994

Numerical investigation of separated nozzle flows

A numerical study of axisymmetric overexpanded nozzle is presented. The flow structure of the startup and throttle-down processes are examined. During the impulsive startup process, observed flow features include the Mach disk, separation shock, Mach stem, vortex core, contact surface, slip stream, initial shock front, and shocklet. Also the movement of the Mach disk is not monotonical in the downstream direction. For a range of pressure ratios, hysteresis phenomenon occurs; different solutions were obtained depending on different processes. Three types of flow structures were observed. The location of separation point and the lower end turning point of hysteresis are closely predicted. A high peak of pressure is associated with the nozzle flow reattachment. The reversed vortical structure and affects engine performance.

Chen, C. L.↗
NASA NTRS1982

Effect of Propeller on Engine Cooling System Drag and Performance

The pressure recovery of incoming cooling air and the drag associated with engine cooling of a typical general aviation twin-engine aircraft was Investigated experimentally. The semispan model was mounted vertically in the 40 x 80-Foot Wind Tunnel at Ames Research Center. The propeller was driven by an electric motor to provide thrust with low vibration levels for the cold-now configuration. It was found that the propeller slip-stream reduces the frontal air spillage around the blunt nacelle shape. Consequently, this slip-stream effect promotes flow reattachment at the rear section of the engine nacelle and improves inlet pressure recovery. These effects are most pronounced at high angles of attack; that is, climb condition. For the cruise condition those improvements were more moderate.

Katz, Joseph↗
NASA NTRS1959

Heat-Transfer and Pressure Measurements on a Flat-Face Cylinder at a Mach Number Range of 2.49 to 4.44

Heat-transfer coefficients and pressure distributions were obtained on a 4-inch-diameter flat-face cylinder in the Langley Unitary Plan wind tunnel. The measured stagnation heat-transfer coefficient agrees well with 55 percent of the theoretical value predicted by the modified Sibulkin method for a hemisphere. Pressure measurements indicated the dimensionless velocity gradient parameter r du\ a(sub t) dx, where x=0 at the stagnation point was approximately 0.3 and invariant throughout the Mach number range from 2.49 to 4.44 and the Reynolds number range from 0.77 x 10(exp 6) to 1.46 x 10(exp 6). The heat-transfer coefficients on the cylindrical afterbody could be predicted with reasonable accuracy by flat-plate theory at an angle of attack of 0 deg. At angles of attack the cylindrical afterbody stagnation-line heat transfer could be computed from swept-cylinder theory for large distances back of the nose when the Reynolds number is based on the distance from the flow reattachment points.

Burbank, Paige B.↗
NASA NTRS1994

Incompressible Navier-Stokes Computations with Heat Transfer

The existing pseudocompressibility method for the system of incompressible Navier-Stokes equations is extended to heat transfer problems by including the energy equation. The solution method is based on the pseudo compressibility approach and uses an implicit-upwind differencing scheme together with the Gauss-Seidel line relaxation method. Current computations use one-equation Baldwin-Barth turbulence model which is derived from a simplified form of the standard k-epsilon model equations. Both forced and natural convection problems are examined. Numerical results from turbulent reattaching flow behind a backward-facing step will be compared against experimental measurements for the forced convection case. The validity of Boussinesq approximation to simplify the buoyancy force term will be investigated. The natural convective flow structure generated by heat transfer in a vertical rectangular cavity will be studied. The numerical results will be compared by experimental measurements by Morrison and Tran.

Kiris, Cetin↗
NASA NTRSDate not supplied

On Generalizably Improving RANS Predictions of Flow Separation and Reattachment

This work presents progress in an ongoing data-driven turbulence modeling effort at NASA Langley Research Center to improve predictions for separated flows. Two augmentation strategies are presented – one to improve predictions for the point of reattachment after smooth-body separation, and another to improve predictions for flow separation due to prolonged adverse pressure gradients. The reattachment augmentation was inspired from lessons learned during attempts at using field inversion and machine learning (FIML); however, it is prescribed as a conventional analytic closed-form expression. Results show that, when introduced into the SST k-w model, it shortens the otherwise overpredicted separation bubble length for three cases characterized by different Reynolds numbers and flow geometries. The second augmentation, which addresses flow separation under prolonged adverse pressure gradients, is inferred via FIML and applied as a neural network within the Spalart-Allmaras model. It uses features that are chosen such that the presented results show an improved predictive accuracy for the training case without affecting other cases where the augmentation is not needed. Further testing is required to establish the generalizability of this augmentation. The rationale behind the chosen features that serve as inputs to both these augmentations is also presented for the benefit of the reader.

machine learning↗
NASA NTRS1988

The phase reversal phenomenon at flow separation and reattachment

Tests were conducted on two different airfoils, one of them in a low-turbulence tunnel, to detect laminar separation and turbulent reattachment locations. A 'nonintrusive' multielement sensor consisting of a large number of closely spaced individual nickel films was vacuum deposited on a thin substrate and bonded to the airfoil model surface. Each sensor element was a part of an independent constant temperature anemometer system. Time history as well as spectral analysis of signals from surface film gauges were used to determine the surface shear flow characteristics. A major breakthrough was achieved with the discovery of phase reversal in low-frequency dynamic shear stress signals across regions of flow separation and reattachment.

Stack, J. Pete↗
NASA NTRS1979

Investigation of a reattaching turbulent shear layer Flow over a backward-facing step

The paper studies incompressible flow over a backward-facing step in order to investigate the flow characteristics in the separated shear layer, the reattachment zone, and the redeveloping boundary layer after reattachment. It is shown that turbulent intensities and shear stress reach maxima in the reattachment zone, followed by rapid decay near the surface after reattachment. In addition, it is found that downstream of reattachment, the flow returns very slowly to the structure of an ordinary turbulent boundary layer.

Kim, J.↗
NASA NTRS1984

Effect of initial conditions on turbulent reattachment downstream of a backward-facing step

The reattachment of a fully turbulent, two-dimentional shear layer downstream of a backward-facing step has been studied experimentally. The work examines the effect of variations in inlet conditions on the process of reattachment. A series of experiments was conducted in a low-speed wind tunnel using specialized instrumentation suited to the highly turbulent reversing flow near reattachment. Accurate characterization of the time-mean features of the reattaching flows was possible. Assuming linear scaling normalized on distance from reattachment, distributions of normalized pressure coefficient and forward flow fraction, and time-averaged skin friction coefficient appear universal for two-dimensional reattachment, independent of initial conditions and step height, for given duct geometry (area ratio) and for high step-height Reyolds numbers with thin separating boundary layers. The results suggest universal flow structure in the reattachment zone.

Westphal, R. V.↗
NASA NTRS1983

Reattaching turbulent shear layers with perturbed structure

The reattachment of a fully turbulent, two-dimensional shear layer downstream of a backward-facing step has been studied experimentally. The work examines the effect of modifications in shear layer structure upstream of reattachment. A series of experiments were conducted in a low-speed wind tunnel using specialized instrumentation suited to the highly turbulent, reversing flow near reattachment. Accurate characterization of the time-mean features of the reattaching flows was possible. Assuming linear scaling normalized on distance from reattachment, distributions of the normalized pressure coefficients, the time-averaged skin friction coefficient, and the forward flow fraction appear universal for two-dimensional reattachment, independent of initial conditions and steep height, for given duct geometry (area ratio) and for high step height Reynolds numbers. The results suggest universal flow structure in the reattachment zone.

Westphal, R. V.↗
NASA NTRS1990

Method and apparatus for detecting laminar flow separation and reattachment

The invention is a method and apparatus for simultaneously detecting laminar separation and reattachment of a fluid stream such as an airstream from and to the upper surface of an airfoil by simultaneously sensing and comparing a plurality of output signals. Each signal represents the dynamic shear stress at one of an equal number of sensors spaced along a straight line on the surface of the airfoil that extends parallel to the airstream. The output signals are simultaneously compared to detect the sensors across which a reversal in phase of said output signal occurs, said detected sensors being in the region of laminar separation or reattachment.

Stack, John P.↗
NASA NTRS2007

Transition in Separating-Reattaching Boundary Layer Flows

Experimental work with leading edge separation bubbles is presented to clarify the issues regarding transition in separated regions. Hot-wire measurements, in the form of oscilloscope traces, turbulence intermittency and conditionally sampled velocity distributions are given. The resulting points of transition onset and spot production rates are compared to existing correlations.

Malkiel, Ed↗