Search NASA⌕ Search

SEARCH · Search NASA

Results for “REPORTING REQUIREMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

NASA FY 2000 Accountability Report

This Accountability Report consolidates reports required by various statutes and summarizes NASA's program accomplishments and its stewardship over budget and financial resources. It is a culmination of NASA's management process, which begins with mission definition and program planning, continues with the formulation and justification of budgets for the President and Congress, and ends with scientific and engineering program accomplishments. The report covers activities from October 1, 1999, through September 30, 2000. Achievements are highlighted in the Statement of the Administrator and summarized in the Report.

Source record↗
NASA NTRS1999

National Aeronautics and Space Administration 1999 Accountability Report

This Accountability Report consolidates reports required by various statutes and summarizes NASA's program accomplishments and its stewardship over budget and financial resources. It is a culmination of NASA's management process, which begins with mission definition and program planning, continues with the formulation and justification of budgets for the President and Congress, and ends with the resulting scientific and engineering program accomplishments. The report covers activities from October 1, 1998, through September 30, 1999, with a discussion of some subsequent events. Program accomplishments included the deployment and operation of the Chandra X-ray Observatory, the delivery of supplies and equipment needed to live and operate on the International Space Station, and the development of the first global 3-D map of Mars. Achievements are highlighted in the Statement of the Administrator and summarized in the performance section of this report.

Source record↗
NASA NTRS2019

Defining a Space Mission Architectural Framework: Guiding Robotic Space Mission Design and Development at NASA Goddard Spaceflight Center

Modern Systems Engineering activities for robotic science missions face increased complexity due to evolving measurement requirements, increased collaboration amongst stakeholders and increased collaboration between human and robotic systems. While NASA has employed standard process frameworks for project management and systems engineering for years, it has not yet established an architecture framework (AF) by which its mission systems are described. While an architecture framework is not a necessary component of an organization's operations, the value of a specified AF greatly enhances an organization's ability to define systems consistently and aid in communication across project and organizational boundaries. The current effort identifies an approach to establishing a Space Mission Architecture Framework (SMAF), an AF with roots in ISO 42010 (Systems and Software Engineering-Architecture Description), NASA Procedural Requirements (NPR) 7120.5 (NASA Space Flight Program and Project Management Requirements) and 7123.1B (NASA Systems Engineering Processes and Requirements). The heart of the AF lies in its viewpoints and work products, artifacts that represent a set of information from the viewpoint of a particular stakeholder. This effort articulates the needs, goals and objectives that the SMAF addresses, as well as the approach to creating the framework and establishing the various work products. A full set of work products, sufficient to satisfy the Mission System reporting requirements of NPR 7120/7123 at Key Decision Point (KDP) A is identified in this paper.

Architecture↗
NASA NTRS2022

Merging of the Case 2 Regional Coast Colour and Maximum‑Peak Height Chlorophyll‑a Algorithms: Validation and Demonstration of Satellite‑derived Retrievals Across US Lakes

Water quality monitoring is relevant for protecting the designated, or beneficial uses, of water such as drinking, aquatic life, recreation, irrigation, and food supply that support the economy, human well-being, and aquatic ecosystem health. Managing finite water resources to support these designated uses requires information on water quality so that managers can make sustainable decisions. Chlorophyll-a (chl-a, µg L−1) concentration can serve as a proxy for phytoplankton biomass and may be used as an indicator of increased anthropogenic nutrient stress. Satellite remote sensing may present a complement to in situ measures for assessments of water quality through the retrieval of chl-a with in-water algorithms. Validation of chl-a algorithms across US lakes improves algorithm maturity relevant for monitoring applications. This study compares performance of the Case 2 Regional Coast Colour (C2RCC) chl-a retrieval algorithm, a revised version of the Maximum-Peak Height (MPH(P)) algorithm, and three scenarios merging these two approaches. Satellite data were retrieved from the MEdium Resolution Imaging Spectrometer (MERIS) and the Ocean and Land Colour Instrument (OLCI), while field observations were obtained from 181 lakes matched with U.S. Water Quality Portal chl-a data. The best performance based on mean absolute multiplicative error (MAEmult) was demonstrated by the merged algorithm referred to as C15−M10 (MAEmult = 1.8, biasmult = 0.97, n = 836). In the C15−M10 algorithm, the MPH(P) chl-a value was retained if it was > 10 µg L−1; if the MPH(P) value was ≤ 10 µg L−1, the C2RCC value was selected, as long as that value was < 15 µg L−1. Time-series and lake-wide gradients compared against independent assessments from Lake Champlain and long-term ecological research stations in Wisconsin were used as complementary examples supporting water quality reporting requirements. Trophic state assessments for Wisconsin lakes provided examples in support of inland water quality monitoring applications. This study presents and assesses merged adaptations of chl-a algorithms previously reported independently. Additionally, it contributes to the transition of chl-a algorithm maturity by quantifying error statistics for a number of locations and times.

Satellite↗
NASA NTRSDate not supplied

Openet: Applications of Satellite-Based Evapotranspiration Data for Water Resources Management in the Western United States

Advancing water security in overallocated river basins globally requires consistent and reproducible information on consumptive use of water that can anchor the development of data-driven solutions to the challenge of balancing water supply and demand. OpenET is a fully automated system for field-scale (30 m), satellite-based mapping of evapotranspiration (ET) at daily, monthly and annual timesteps. OpenET currently provides spatially contiguous data throughout the 23 westernmost states in the continental US, and includes both current information as well as multi-year timeseries of ET. The OpenET consortium has implemented an ensemble of satellite-based ET models (ALEXI/DisALEXI, eeMETRIC, PT-JPL, geeSEBAL, SIMS and SSEBop) on Google Earth Engine, which provides a shared computing platform for collaboration on processing of data from Landsat and other satellites, land cover and meteorological inputs, leading to increased consistency and accuracy across the ensemble of models. Earth Engine also facilitates hosting and distribution of data via open data collections and an application programming interface. We provide updates on the OpenET framework, open data services and data access tools, approach to geographic expansion, recent accuracy assessments, and describe how a user-driven design approach has facilitated successful applications of OpenET data for a wide range of water resource management activities. Applications to date include: use of ET data to improve quantification of ET and consumptive use in Oregon, Utah and the Upper Colorado River Basin; streamlining of water use reporting requirements in the California Delta; support for calculation of water budgets for the implementation of the Sustainable Groundwater Management Act in California; and integration into decision support tools for irrigation management. The use cases demonstrate how satellite-derived ET data that are easily accessed and seen as broadly accepted can accelerate adoption of innovative water management practices at scale, and support advances in the sustainability of water supplies. Uptake and use of data by the OpenET science community has also led to advances in our understanding of the impacts of landcover change, irrigation intensification and wildfire events on hydrology and the water security.

Applications↗
NASA NTRS1967

Computer/PERT technique monitors actual versus allocated costs

A computer method measures the users performance in cost-type contracts utilizing the existing nasa program evaluation review technique without imposing any additional reporting requirements. progress is measured by comparing actual costs with a value of work performed in a specific period.

Houry, E.↗
NASA NTRS1956

Turbojet-engine Starting and Acceleration

From considerations of safety and reliability in performance of gas-turbine aircraft, it is clear that engine starting and acceleration are of utmost importance. For this reason extensive efforts have been devoted to the investigation of the factors involved in the starting and acceleration of engines. In chapter III it is shown that certain basic combustion requirements must be met before ignition can occur; consequently, the design and operation of an engine must be tailored to provide these basic requirements in the combustion zone of the engine, particularly in the vicinity of the ignition source. It is pointed out in chapter III that ignition by electrical discharges is aided by high pressure, high temperature, low gas velocity and turbulence, gaseous fuel-air mixture, proper mixture strength, and-an optimum spark. duration. The simultaneous achievement of all these requirements in an actual turbojet-engine combustor is obviously impossible, yet any attempt to satisfy as many requirements as possible will result in lower ignition energies, lower-weight ignition systems, and greater reliability. These factors together with size and cost considerations determine the acceptability of the final ignition system. It is further shown in chapter III that the problem of wall quenching affects engine starting. For example, the dimensions of the volume to be burned must be larger than the quenching distance at the lowest pressure and the most adverse fuel-air ratio encountered. This fact affects the design of cross-fire tubes between adjacent combustion chambers in a tubular-combustor turbojet engine. Only two chambers in these engines contain spark plugs; therefore, the flame must propagate through small connecting tubes between the chambers. The quenching studies indicate that if the cross-fire tubes are too narrow the flame will not propagate from one chamber to another. In order to better understand the role of the basic factors in actual engine operation, many investigations have been conducted in single combustors from gas-turbine engines and in full-scale engines in altitude tanks and in flight. The purpose of the present chapter is to discuss the results of such studies and, where possible, to interpret these results qualitatively in terms of the basic requirements reported in chapter III. The discussion parallels the three phases of turbojet engine starting: (1) Ignition of the fuel-air mixture (2) Propagation of flame throughout the combustion zone (3) Acceleration of the engine to operating speed.

Mc Cafferty, R. J.↗
NASA NTRS1972

Habitability study, earth orbital space stations

Work is reported aimed at supporting the shuttle payload carriers, such as, the Sortie Carrier and RAM. Sketches, renderings, descriptions of scale models and full scale mock-ups, and reports required to fully explain the design recommendations are presented.

Source record↗
NASA NTRS1981

Solar heating for a restaurant--North Little Rock, Arkansas

Hot water consumption of large building affects solar-energy system design. Continual demand for hot water at restaurant makes storage less important than at other sites. Storage capacity of system installed in December 1979 equals estimated daily hot-water requirement. Report describes equipment specifications and modifications to existing building heating and hot water systems.

Source record↗
NASA NTRS1950

Investigation of Power Requirements for Ice Prevention and Cyclical De-Icing of Inlet Guide Vanes with Internal Electric Heaters

An investigation was conducted to determine the electric power requirements necessary for ice protection of inlet guide vanes by continuous heating and by cyclical de-icing. Data are presented to show the effect of ambient-air temperature, liquid-water content, air velocity, heat-on period, and cycle times on the power requirements for these two methods of ice protection. The results showed that for a hypothetical engine using 28 inlet guide vanes under similar icing conditions, cyclical de-icing can provide a total power saving as high as 79 percent over that required for continuous heating. Heat-on periods in the order of 10 seconds with a cycle ratio of about 1:7 resulted in the best over-all performance with respect to total power requirements and aerodynamic losses during the heat-off period. Power requirements reported herein may be reduced by as much as 25 percent by achieving a more uniform surface-temperature distribution. A parameter in terms of engine mass flow, vane size, vane surface temperature, and the icing conditions ahead of the inlet guide vanes.was developed by which an extension of the experimental data to icing conditions and inlet guide vanes, other than those investigated was possible.

VonGlahn, Uwe↗
NASA NTRS1983

User interface to administrative DRMS within a distributed environment

The implementation of a data base management system (DBMS) into a communications office to control and report on communication leased service contracts is discussed. The system user executes online programs to update five files residing on a UNIVAC 1100/82, through the forms mode features of the Tektronix 4025 terminal and IMSAI 8080 microcomputer. This user can select the appropriate form to the Tektronix 4025 screen, and enter new data, update existing data, or discontinue service. Selective online printing of 40 reports is accomplished by the system user to satisfy management, budget, and bill payment reporting requirements.

Martin, L. D.↗
NASA NTRS1988

Finite element methodology for integrated flow-thermal-structural analysis

Papers entitled, An Adaptive Finite Element Procedure for Compressible Flows and Strong Viscous-Inviscid Interactions, and An Adaptive Remeshing Method for Finite Element Thermal Analysis, were presented at the June 27 to 29, 1988, meeting of the AIAA Thermophysics, Plasma Dynamics and Lasers Conference, San Antonio, Texas. The papers describe research work supported under NASA/Langley Research Grant NsG-1321, and are submitted in fulfillment of the progress report requirement on the grant for the period ending February 29, 1988.

Thornton, Earl A.↗
NASA NTRS1991

Recommendations for an Executive Information System (EIS) for the NASA Accounting and Financial Information System (NAFIS)

The objectives were to: (1) survey state-of-the-art computing architectures, tools, and technologies for implementing an Executive Information System (EIS); (2) review MSFC capabilities and efforts in developing an EIS for Shuttle Projects Office and the Payloads Project Office; (3) review management reporting requirements for the NASA Accounting and Financial Information System (NAFIS) Project in the areas of cost, schedule, and technical performance, and insure that the EIS fully supports these requirements; and (4) develop and implement a pilot concept for a NAFIS EIS. A summary of the findings of this work is presented.

Goss, Ernest Preston↗
NASA NTRS1992

Intelligent diagnostics systems

Intelligent systems have been applied to today's problems and could also be applied to space operations integrity. One of these systems is the XMAN tool designed for 'troubleshooting' jet engines. XMAN is the eXpert MAiNtenance tool developed to be an expert information analysis tool which stores trending and diagnostic data on Air Force engines. XMAN operates with a 'network topology' which follows a flow chart containing engine management information reports required by the governments technical order procedures. With XMAN technology, the user is able to identify engine problems by presenting the assertions of the fault isolation logic and attempting to satisfy individual assertions by referring to the databases created by an engine monitoring system. The troubleshooting process requires interaction between the technician and the computer to acquire new evidence form auxiliary maintenance tests corroboration of analytical results to accurately diagnose equipment malfunctions. This same technology will be required for systems which are functioning in space either with an onboard crew, or with an unmanned system. The technology and lessons learned developing this technology while suggesting definite applications for its use with developing space systems are addressed.

Mcquiston, Barbara M.↗
NASA NTRS1994

Development of an analytical-numerical model to predict radiant emission or absorption

The development of an analytical-numerical model to predict radiant emission or absorption is discussed. A voigt profile is assumed to predict the spectral qualities of a singlet atomic transition line for atomic species of interest to the OPAD program. The present state of this model is described in each progress report required under contract. Model and code development is guided by experimental data where available. When completed, the model will be used to provide estimates of specie erosion rates from spectral data collected from rocket exhaust plumes or other sources.

Wallace, Tim L.↗
NASA NTRS1993

Fan Noise Prediction System Development: Source/Radiation Field Coupling and Workstation Conversion for the Acoustic Radiation Code

The Acoustic Radiation Code (ARC) is a finite element program used on the IBM mainframe to predict far-field acoustic radiation from a turbofan engine inlet. In this report, requirements for developers of internal aerodynamic codes regarding use of their program output an input for the ARC are discussed. More specifically, the particular input needed from the Bolt, Beranek and Newman/Pratt and Whitney (turbofan source noise generation) Code (BBN/PWC) is described. In a separate analysis, a method of coupling the source and radiation models, that recognizes waves crossing the interface in both directions, has been derived. A preliminary version of the coupled code has been developed and used for initial evaluation of coupling issues. Results thus far have shown that reflection from the inlet is sufficient to indicate that full coupling of the source and radiation fields is needed for accurate noise predictions ' Also, for this contract, the ARC has been modified for use on the Sun and Silicon Graphics Iris UNIX workstations. Changes and additions involved in this effort are described in an appendix.

Meyer, H. D.↗
NASA NTRS1996

Strehl Ratio Meter for Focusing Segmented Mirrors 1

Initial focusing segmented mirrors that must be deployed in space, such as the Next Generation Space Telescope (NGST), provide challenges not faced before in the area of adaptive optics. The devices used to focus the mirror must minimize the power used and unnecessary mechanical movement. The device described in this report requires no movable parts except for the essential actuators required to move the mirror segments. Detail description of the components can be found in Coker, 1996. The primary mirror of the NGST will consist of 9 segments, a central annular segment, surrounded by 8 segments. The entire mirror assembly will be an 8 meter nearly filled circle (with the corners of the segments clipped to allow for storage in an Atlas IIe shroud). As the segments of the primary mirror are deployed to their operational positions, they must be positioned to within small fractions of a wavelength of near infrared light. When focused, the NGST will put most of its collected li-ht into the small region near the center of its focal plane. The ratio of the total light in the diffraction limited spot about the center of the focal plane to the total light in the focal plane. The purpose of this research effort is to design and build a device that will measure Strehl ratio and to use demonstrate that the Strehl ratio can be used to focus a segmented mirror.

Olivier, Philip D.↗