Results for “RF controls” — Page 4

NASA NTRS2011

Early Oscillation Detection Technique for Hybrid DC/DC Converters

Oscillation or instability is a situation that must be avoided for reliable hybrid DC/DC converters. A real-time electronics measurement technique was developed to detect catastrophic oscillations at early stages for hybrid DC/DC converters. It is capable of identifying low-level oscillation and determining the degree of the oscillation at a unique frequency for every individual model of the converters without disturbing their normal operations. This technique is specially developed for space-used hybrid DC/DC converters, but it is also suitable for most of commercial and military switching-mode power supplies. This is a weak-electronic-signal detection technique to detect hybrid DC/DC converter oscillation presented as a specific noise signal at power input pins. It is based on principles of feedback control loop oscillation and RF signal modulations, and is realized by using signal power spectral analysis. On the power spectrum, a channel power amplitude at characteristic frequency (CPcf) and a channel power amplitude at switching frequency (CPsw) are chosen as oscillation level indicators. If the converter is stable, the CPcf is a very small pulse and the CPsw is a larger, clear, single pulse. At early stage of oscillation, the CPcf increases to a certain level and the CPsw shows a small pair of sideband pulses around it. If the converter oscillates, the CPcf reaches to a higher level and the CPsw shows more high-level sideband pulses. A comprehensive stability index (CSI) is adopted as a quantitative measure to accurately assign a degree of stability to a specific DC/DC converter. The CSI is a ratio of normal and abnormal power spectral density, and can be calculated using specified and measured CPcf and CPsw data. The novel and unique feature of this technique is the use of power channel amplitudes at characteristic frequency and switching frequency to evaluate stability and identify oscillations at an early stage without interfering with a DC/DC converter s normal operation. This technique eliminates the probing problem of a gain/phase margin method by connecting the power input to a spectral analyzer. Therefore, it is able to evaluate stability for all kinds of hybrid DC/DC converters with or without remote sense pins, and is suitable for real-time and in-circuit testing. This frequency-domain technique is more sensitive to detect oscillation at early stage than the time-domain method using an oscilloscope.

Wang, Bright L.↗

NASA NTRS2014

Space-Based Reconfigurable Software Defined Radio Test Bed Aboard International Space Station

The National Aeronautical and Space Administration (NASA) recently launched a new software defined radio research test bed to the International Space Station. The test bed, sponsored by the Space Communications and Navigation (SCaN) Office within NASA is referred to as the SCaN Testbed. The SCaN Testbed is a highly capable communications system, composed of three software defined radios, integrated into a flight system, and mounted to the truss of the International Space Station. Software defined radios offer the future promise of in-flight reconfigurability, autonomy, and eventually cognitive operation. The adoption of software defined radios offers space missions a new way to develop and operate space transceivers for communications and navigation. Reconfigurable or software defined radios with communications and navigation functions implemented in software or VHDL (Very High Speed Hardware Description Language) provide the capability to change the functionality of the radio during development or after launch. The ability to change the operating characteristics of a radio through software once deployed to space offers the flexibility to adapt to new science opportunities, recover from anomalies within the science payload or communication system, and potentially reduce development cost and risk by adapting generic space platforms to meet specific mission requirements. The software defined radios on the SCaN Testbed are each compliant to NASA's Space Telecommunications Radio System (STRS) Architecture. The STRS Architecture is an open, non-proprietary architecture that defines interfaces for the connections between radio components. It provides an operating environment to abstract the communication waveform application from the underlying platform specific hardware such as digital-to-analog converters, analog-to-digital converters, oscillators, RF attenuators, automatic gain control circuits, FPGAs, general-purpose processors, etc. and the interconnections among different radio components.

Communications↗

NASA NTRS2011

Early Oscillation Detection for Hybrid DC/DC Converter Fault Diagnosis

This paper describes a novel fault detection technique for hybrid DC/DC converter oscillation diagnosis. The technique is based on principles of feedback control loop oscillation and RF signal modulations, and Is realized by using signal spectral analysis. Real-circuit simulation and analytical study reveal critical factors of the oscillation and indicate significant correlations between the spectral analysis method and the gain/phase margin method. A stability diagnosis index (SDI) is developed as a quantitative measure to accurately assign a degree of stability to the DC/DC converter. This technique Is capable of detecting oscillation at an early stage without interfering with DC/DC converter's normal operation and without limitations of probing to the converter.

Wang, Bright L.↗

NASA NTRS2018

International Space Station Future Correlation Analysis Improvements

Ongoing modal analyses and model correlation are performed on different configurations of the International Space Station (ISS). These analyses utilize on-orbit dynamic measurements collected using four main ISS instrumentation systems: External Wireless Instrumentation System (EWIS), Internal Wireless Instrumentation System (IWIS), Space Acceleration Measurement System (SAMS), and Structural Dynamic Measurement System (SDMS). Remote Sensor Units (RSUs) are network relay stations that acquire flight data from sensors. Measured data is stored in the Remote Sensor Unit (RSU) until it receives a command to download data via RF to the Network Control Unit (NCU). Since each RSU has its own clock, it is necessary to synchronize measurements before analysis. Imprecise synchronization impacts analysis results. A study was performed to evaluate three different synchronization techniques: (i) measurements visually aligned to analytical time-response data using model comparison, (ii) Frequency Domain Decomposition (FDD), and (iii) lag from cross-correlation to align measurements. This paper presents the results of this study.

time synchronization↗

NASA NTRS1983

The 30-GHz monolithic receive module

Key requirements for a 30 GHz GaAs monolithic receive module for spaceborne communication antenna feed array applications include an overall receive module noise figure of 5 dB, a 30 dB RF to IF gain with six levels of intermediate gain control, a five-bit phase shifter, and a maximum power consumption of 250 mW. The RF designs for each of the four submodules (low noise amplifier, some gain control, phase shifter, and RF to IF sub-module) are presented. Except for the phase shifter, high frequency, low noise FETs with sub-half micron gate lengths are employed in the submodules. For the gain control, a two stage dual gate FET amplifier is used. The phase shifter is of the passive switched line type and consists of 5-bits. It uses relatively large gate width FETs (with zero drain to source bias) as the switching elements. A 20 GHz local oscillator buffer amplifier, a FET compatible balanced mixer, and a 5-8 GHz IF amplifier constitute the RF/IF sub-module. Phase shifter fabrication using ion implantation and a self-aligned gate technique is described. Preliminary RF results obtained on such phase shifters are included.

Sokolov, V.↗

NASA NTRS1991

System-Level Integrated Circuit (SLIC) development for phased array antenna applications

A microwave/millimeter wave system-level integrated circuit (SLIC) being developed for use in phased array antenna applications is described. The program goal is to design, fabricate, test, and deliver an advanced integrated circuit that merges radio frequency (RF) monolithic microwave integrated circuit (MMIC) technologies with digital, photonic, and analog circuitry that provide control, support, and interface functions. As a whole, the SLIC will offer improvements in RF device performance, uniformity, and stability while enabling accurate, rapid, repeatable control of the RF signal. Furthermore, the SLIC program addresses issues relating to insertion of solid state devices into antenna systems, such as the reduction in number of bias, control, and signal lines. Program goals, approach, and status are discussed.

Shalkhauser, K. A.↗

NASA NTRS1991

System-level integrated circuit (SLIC) development for phased array antenna applications

A microwave/millimeter wave system-level integrated circuit (SLIC) being developed for use in phased array antenna applications is described. The program goal is to design, fabricate, test, and deliver an advanced integrated circuit that merges radio frequency (RF) monolithic microwave integrated circuit (MMIC) technologies with digital, photonic, and analog circuitry that provide control, support, and interface functions. As a whole, the SLIC will offer improvements in RF device performance, uniformity, and stability while enabling accurate, rapid, repeatable control of the RF signal. Furthermore, the SLIC program addresses issues relating to insertion of solid state devices into antenna systems, such as the reduction in number of bias, control, and signal lines. Program goals, approach, and status are discussed.

Shalkhauser, K. A.↗

NASA NTRS2003

GPS-Like Phasing Control of the Space Solar Power System Transmission Array

The problem of phasing of the Space Solar Power System's transmission array has been addressed by developing a GPS-like radio navigation system. The goal of this system is to provide power transmission phasing control for each node of the array that causes the power signals to add constructively at the ground reception station. The phasing control system operates in a distributed manner, which makes it practical to implement. A leader node and two radio navigation beacons are used to control the power transmission phasing of multiple follower nodes. The necessary one-way communications to the follower nodes are implemented using the RF beacon signals. The phasing control system uses differential carrier phase relative navigation/timing techniques. A special feature of the system is an integer ambiguity resolution procedure that periodically resolves carrier phase cycle count ambiguities via encoding of pseudo-random number codes on the power transmission signals. The system is capable of achieving phasing accuracies on the order of 3 mm down to 0.4 mm depending on whether the radio navigation beacons operate in the L or C bands.

Psiaki, Mark L.↗

NASA NTRS1991

Mixed application MMIC technologies - Progress in combining RF, digital and photonic circuits

Approaches for future 'mixed application' monolithic integrated circuits (ICs) employing optical receive/transmit, RF amplification and modulation and digital control functions are discussed. We focus on compatibility of the photonic component fabrication with conventional RF and digital IC technologies. Recent progress at Honeywell in integrating several parts of the desired RF/digital/photonic circuit integration suite required for construction of a future millimeter-wave optically-controlled phased-array element are illustrated.

Swirhun, S.↗

NASA NTRS1998

Fast, high sensitivity dewpoint hygrometer

A dewpoint/frostpoint hygrometer that uses a surface moisture-sensitive sensor as part of an RF oscillator circuit with feedback control of the sensor temperature to maintain equilibrium at the sensor surface between ambient water vapor and condensed water/ice. The invention is preferably implemented using a surface acoustic wave (SAW) device in an RF oscillator circuit configured to generate a condensation-dependent output signal, a temperature sensor to measure the temperature of the SAW device and to distinguish between condensation-dependent and temperature-dependent signals, a temperature regulating device to control the temperature of the SAW device, and a feedback control system configured to keep the condensation-dependent signal nearly constant over time in the presence of time-varying humidity, corrected for temperature. The effect of this response is to heat or cool the surface moisture-sensitive device, which shifts the equilibrium with respect to evaporation and condensation at the surface of the device. The equilibrium temperature under feedback control is a measure of dewpoint or frostpoint.

Hoenk, Michael E.↗

NASA NTRS1986

Deployable truss structure advanced technology

The 5-meter technology antenna program demonstrated the overall feasibility of integrating a mesh reflector surface with a deployable truss structure to achieve a precision surface contour compatible with future, high-performance antenna requirements. Specifically, the program demonstrated: the feasibility of fabricating a precision, edge-mounted, deployable, tetrahedral truss structure; the feasibility of adjusting a truss-supported mesh reflector contour to a surface error less than 10 mils rms; and good RF test performance, which correlated well with analytical predictions. Further analysis and testing (including flight testing) programs are needed to fully verify all the technology issues, including structural dynamics, thermodynamics, control, and on-orbit RF performance, which are associated with large, deployable, truss antenna structures.

Dyer, J. E.↗

NASA NTRS1984

Thermoelectric temperature control system for the pushbroom microwave radiometer (PBMR)

A closed loop thermoelectric temperature control system is developed for stabilizing sensitive RF integrated circuits within a microwave radiometer to an accuracy of + or - 0.1 C over a range of ambient conditions from -20 C to +45 C. The dual mode (heating and cooling) control concept utilizes partial thermal isolation of the RF units from an instrument deck which is thermally controlled by thermoelectric coolers and thin film heaters. The temperature control concept is simulated with a thermal analyzer program (MITAS) which consists of 37 nodes and 61 conductors. A full scale thermal mockup is tested in the laboratory at temperatures of 0 C, 21 C, and 45 C to confirm the validity of the control concept. A flight radiometer and temperature control system is successfully flight tested on the NASA Skyvan aircraft.

Dillon-Townes, L. A.↗

NASA NTRS2014

Embedded Thermal Control for Spacecraft Subsystems Miniaturization

Optimization of spacecraft size, weight and power (SWaP) resources is an explicit technical priority at Goddard Space Flight Center. Embedded Thermal Control Subsystems are a promising technology with many cross cutting NSAA, DoD and commercial applications: 1.) CubeSatSmallSat spacecraft architecture, 2.) high performance computing, 3.) On-board spacecraft electronics, 4.) Power electronics and RF arrays. The Embedded Thermal Control Subsystem technology development efforts focus on component, board and enclosure level devices that will ultimately include intelligent capabilities. The presentation will discuss electric, capillary and hybrid based hardware research and development efforts at Goddard Space Flight Center. The Embedded Thermal Control Subsystem development program consists of interrelated sub-initiatives, e.g., chip component level thermal control devices, self-sensing thermal management, advanced manufactured structures. This presentation includes technical status and progress on each of these investigations. Future sub-initiatives, technical milestones and program goals will be presented.

Thermal Control↗

NASA NTRSDate not supplied

Transcriptomics-based Machine Learning Analysis Predicts Space-Exposed Murine Livers

Limited sample sizes, high data dimensionality, and sensitivity to technical and biological variability of next generation sequencing (NGS), typically limits machine learning (ML) approaches in spaceflight studies that include radiation effects. However, pooling smaller studies while addressing intra- and inter-study variabilities allows for ML predictive modeling. Here, integration methods were applied to whole transcriptome shotgun sequencing (RNA-seq) data from six mouse liver GeneLab datasets (GLDS) (n ranging from 6 to 39 samples) from with a total of 81 spaceflight and ground-control samples to determine top features (i.e. genes) relevant to spaceflight including the effect of radiation exposure. RNASeq counts were normalized for each study, then merged and scaled across all datasets. Data dimensionality was reduced using a minimum redundancy maximum relevance (MRMR) methodology. Redundancy and relevance were computed using the Pearson correlation and F-statistic, respectively. The top 100 MRMR features were used to predict spaceflight vs. ground-control samples using Random Forest (RF), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA) classifiers with 5-fold cross validation (CV). Principal component analysis (PCA) on the complete feature set versus the MRMR features shows separation between spaceflight samples and ground controls (Figure 1A). The ML-based gene sets were compared against differential gene expression results obtained with DESeq2 from individual GLDS. Using all features or randomly sampled subsets at matching set sizes with MRMR, a maximum classifier accuracy of 69% was shown on the test set over 5 folds. For all classifiers, CV training using at least the top 30 MRMR genes show minimum 89% accuracy and 0.95 AUC value on the test set over 5 folds (Figure 1B). Baseline set analysis on differentially expressed genes (DEGs) identified using padj ≤ 0.05 show 295 DEGs that overlap at least two studies and 13 DEGs that overlap three studies (Figure 1C). Set analysis between the top 100 MRMR features and the DEGs showed 47 genes that overlap at least one study and 24 genes that overlap two studies. Over-representation analysis showed overlapping biological processes related to fatty acid and lipid metabolism which may indicate these processes in the response to spaceflight stressors. MRMR feature selection for the selected ML methods improve performance relative to a classifier built on all features or randomly sampled subsets. Permutation feature importance within the decorrelated MRMR features showed concordance in feature ranking between ML methods. A challenge of applying ML methods across heterogeneous NGS data is accounting for signal:noise. Here, signal validation across studies was shown by intersecting sets between top MRMR genes and DEGs from DESeq2 analysis. Non-intersecting sets introduce opportunity to explore genes relevant to differentiating space flight exposed groups and implementing ML methods across existing NGS datasets may overcome sample size limitations.

Machine Learning↗

NASA NTRSDate not supplied

Transcriptomics-based Machine Learning (ML) Analysis Predicts Space-Exposed Murine Livers

Limited sample sizes, high data dimensionality, and sensitivity to technical and biological variability of next generation sequencing (NGS), typically limits machine learning (ML) approaches in spaceflight studies that include radiation effects. However, pooling smaller studies while addressing intra- and inter-study variabilities allows for ML predictive modeling. Here, integration methods were applied to whole transcriptome shotgun sequencing (RNA-seq) data from six mouse liver GeneLab datasets (GLDS) (n ranging from 6 to 39 samples) from with a total of 81 spaceflight and ground-control samples to determine top features (i.e. genes) relevant to spaceflight including the effect of radiation exposure. RNASeq counts were normalized for each study, then merged and scaled across all datasets. Data dimensionality was reduced using a minimum redundancy maximum relevance (MRMR) methodology. Redundancy and relevance were computed using the Pearson correlation and F-statistic, respectively. The top 100 MRMR features were used to predict spaceflight vs. ground-control samples using Random Forest (RF), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA) classifiers with 5-fold cross validation (CV). Principal component analysis (PCA) on the complete feature set versus the MRMR features shows separation between spaceflight samples and ground controls (Figure 1A). The ML-based gene sets were compared against differential gene expression results obtained with DESeq2 from individual GLDS. Using all features or randomly sampled subsets at matching set sizes with MRMR, a maximum classifier accuracy of 69% on the test set over 5 folds. For all classifiers, CV training using at least the top 30 MRMR genes show minimum 89% accuracy and 0.95 AUC value on the test set over 5 folds (Figure 1B). Baseline set analysis on differentially expressed genes (DEGs) identified using padj ≤ 0.05 show 295 DEGs that overlap at least two studies and 13 DEGs that overlap three studies (Figure 1C). Set analysis between the top 100 MRMR features and the DEGs showed 47 genes that overlap at least one study and 24 genes that overlap two studies. Over-representation analysis showed overlapping biological processes related to fatty acid and lipid metabolism which may indicate these processes in the response to spaceflight stressors. MRMR feature selection for the selected ML methods improve performance relative to a classifier built on all features or randomly sampled subsets. Permutation feature importance within the decorrelated MRMR features showed concordance in feature ranking between ML methods. A challenge of applying ML methods across heterogeneous NGS data is accounting for signal:noise. Here, signal validation across studies was shown by intersecting sets between top MRMR genes and DEGs from DESeq2 analysis. Non-intersecting sets introduce opportunity to explore genes relevant to differentiating space flight exposed groups and implementing ML methods across existing NGS datasets may overcome sample size limitations.

Machine Learning↗

NASA NTRSDate not supplied

Transcriptomics-based Machine Learning Analysis Predicts Space-Exposed Murine Livers

Limited sample sizes, high data dimensionality, and sensitivity to technical and biological variability of next generation sequencing (NGS), typically limits machine learning (ML) approaches in spaceflight studies that include radiation effects. However, pooling smaller studies while addressing intra- and inter-study variabilities allows for ML predictive modeling. Here, integration methods were applied to whole transcriptome shotgun sequencing (RNA-seq) data from six mouse liver GeneLab datasets (GLDS) (n ranging from 6 to 39 samples) from with a total of 81 spaceflight and ground-control samples to determine top features (i.e. genes) relevant to spaceflight including the effect of radiation exposure. RNASeq counts were normalized for each study, then merged and scaled across all datasets. Data dimensionality was reduced using a minimum redundancy maximum relevance (MRMR) methodology. Redundancy and relevance were computed using the Pearson correlation and F-statistic, respectively. The top 100 MRMR features were used to predict spaceflight vs. ground-control samples using Random Forest (RF), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA) classifiers with 5-fold cross validation (CV). Principal component analysis (PCA) on the complete feature set versus the MRMR features shows separation between spaceflight samples and ground controls (Figure 1A). The ML-based gene sets were compared against differential gene expression results obtained with DESeq2 from individual GLDS. Using all features or randomly sampled subsets at matching set sizes with MRMR, a maximum classifier accuracy of 69% was shown on the test set over 5 folds. For all classifiers, CV training using at least the top 30 MRMR genes show minimum 89% accuracy and 0.95 AUC value on the test set over 5 folds (Figure 1B). Baseline set analysis on differentially expressed genes (DEGs) identified using padj ≤ 0.05 show 295 DEGs that overlap at least two studies and 13 DEGs that overlap three studies (Figure 1C). Set analysis between the top 100 MRMR features and the DEGs showed 47 genes that overlap at least one study and 24 genes that overlap two studies. Over-representation analysis showed overlapping biological processes related to fatty acid and lipid metabolism which may indicate these processes in the response to spaceflight stressors. MRMR feature selection for the selected ML methods improve performance relative to a classifier built on all features or randomly sampled subsets. Permutation feature importance within the decorrelated MRMR features showed concordance in feature ranking between ML methods. A challenge of applying ML methods across heterogeneous NGS data is accounting for signal:noise. Here, signal validation across studies was shown by intersecting sets between top MRMR genes and DEGs from DESeq2 analysis. Non-intersecting sets introduce opportunity to explore genes relevant to differentiating space flight exposed groups and implementing ML methods across existing NGS datasets may overcome sample size limitations.

Machine Learning↗

NASA NTRS1975

Microwave Power Transmission System Studies. Volume 1: Executive Summary

A study of microwave power generation, transmission, reception and control was conducted as a part of a program to demonstrate the feasibility of power transmission from geosynchronous orbit. A summary is presented of results concerning design approaches, estimated costs (ROM), critical technology, associated ground and orbital test programs with emphasis on dc to rf conversion, transmitting antenna, phase control, mechanical systems, flight operations, ground power receiving-rectifying antenna with systems analysis, and evaluation. Recommendations for early further in-depth studies complementing the technology program are included.

Maynard, O. E.↗

NASA NTRS2013

Wireless Chalcogenide Nanoionic-Based Radio-Frequency Switch

A new nonvolatile nanoionic switch is powered and controlled through wireless radio-frequency (RF) transmission. A thin layer of chalcogenide glass doped with a metal ion, such as silver, comprises the operational portion of the switch. For the switch to function, an oxidizable electrode is made positive (anode) with respect to an opposing electrode (cathode) when sufficient bias, typically on the order of a few tenths of a volt or more, is applied. This action causes the metal ions to flow toward the cathode through a coordinated hopping mechanism. At the cathode, a reduction reaction occurs to form a metal deposit. This metal deposit creates a conductive path that bridges the gap between electrodes to turn the switch on. Once this conductive path is formed, no further power is required to maintain it. To reverse this process, the metal deposit is made positive with respect to the original oxidizable electrode, causing the dissolution of the metal bridge thereby turning the switch off. Once the metal deposit has been completely dissolved, the process self-terminates. This switching process features the following attributes. It requires very little to change states (i.e., on and off). Furthermore, no power is required to maintain the states; hence, the state of the switch is nonvolatile. Because of these attributes the integration of a rectenna to provide the necessary power and control is unique to this embodiment. A rectenna, or rectifying antenna, generates DC power from an incident RF signal. The low voltages and power required for the nanoionic switch control are easily generated from this system and provide the switch with a novel capability to be operated and powered from an external wireless device. In one realization, an RF signal of a specific frequency can be used to set the switch into an off state, while another frequency can be used to set the switch to an on state. The wireless, miniaturized, and nomoving- part features of this switch make it suitable for applications such as integration into garments, RFID (radio-frequency identification) tags, and conformal structures (e.g., aircraft wings, sounding rockets contours, etc). In the case of RFID tags the innovation will provide countermeasures to attempts for identity theft and other uninvited attempts for retrieval of information. It could also be applicable to the automotive industry as well as the aerospace industry for collision avoidance and phased array radar systems, respectively

Nessel, James↗