Search NASA⌕ Search

SEARCH · Search NASA

Results for “Radiative diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Sb doping via drive-in diffusion as an alternative to in-situ doping in VTD

Group-V doping can enhance the efficiency of CdTe photovoltaic devices by increasing the open-circuit voltage (Voc), if long lifetimes can be retained and radiative voltage loss can be avoided. In this preliminary study, ex-situ Sb doping via drive-in diffusion improved grain sizes compared to Sb-free films without CdCl2 treatment. Sb doping did not reduce the carrier lifetime for uniform CdSeTe absorbers. Additionally, the CST-air surface recombination decreased with Sb. No potential fluctuations were observed by PL at this doping level. The [Sb] and carrier concentration for this study are not yet measured so the conclusions drawn are all preliminary

14 SOLAR ENERGY↗
DOE OSTI2025

Accelerating plasma and radiation surface science using transient grating spectroscopy

A facility for the investigation of in situ radiation-materials and plasma-materials interaction is demonstrated with tungsten, using transient grating spectroscopy as a probe of thermal diffusivity and surface acoustic wave speed. Helium plasma exposure at 645 °C to 1.18 × 10 18 cm −2 helium, until the growth of tungsten fuzz, showed an increase in surface acoustic wave speed at the near-surface from 2542 ± 1 m s −1 up to 2565 ± 1 m s −1 , followed by a greater drop to 2499 ± 7 m s −1 . No observable change in thermal diffusivity was present for plasma exposure alone. A separate 10.26 MeV self-ion-irradiation of tungsten to a dose of 7.92 dpa showed a reduction in both thermal diffusivity from 61.4 ± 1.4 mm 2 s −1 to 36.0 ± 0.7 mm 2 s −1 , following trends seen in existing studies, and surface acoustic wave speed from 2647.8 ± 0.6 m s −1 to 2640.0 ± 0.4 m s −1 . Facilities like these are poised to rapidly close critical knowledge gaps regarding the coupled effects of plasma and radiation damage for materials in fusion systems.

Accelerated plasmas↗
DOE OSTI2024

Moisture Performance of Unvented Attics With Vapor Diffusion Ports and Buried Ducts in Hot, Humid Climates

Energy efficiency measures, such as cool roofs, radiant barriers, interior radiative control coatings, and buried ducts are increasing in popularity and are promoted by energy codes because of their energy-saving potential. However, these strategies can also pose moisture risks in attics by lowering surface temperatures and increasing condensation potential and moisture accumulation. Of particular concern in hot-humid climates is dripping condensation on cold air-conditioning ductwork in the summer - commonly referred to as duct "sweating" - which threatens the attic floor with conditions conducive to mold growth and rot. One strategy to mitigate these moisture issues is to wrap ductwork in thicker duct-wrap insulation with an integrated exterior vapor barrier, but thick duct wrap can be difficult to come by, expensive, and unwieldy to work with. This study explores an alternative strategy of reducing moisture issues while embracing energy efficiency by using unvented attics with vapor diffusion ports and buried ductwork in hot-humid climates. Vapor diffusion ports have been studied so far in a wide range of U.S. climates, mostly in the context of conditioned attics. In this study, the strategy is implemented in the novel context of hot-humid climates with ductwork sitting atop blown-in attic floor insulation in unconditioned attics. Using a combination of field experiments and hygrothermal modeling, the findings of this project indicate that an unvented attic with vapor diffusion ports and buried ducts may be a key part of a successful low-cost method for reducing the attic moisture load by venting excess moisture out of the attic, keeping duct-jacket surfaces above dew point temperature, and keeping the roof deck safe from winter moisture accumulation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Nonlocal, Pattern-Aware Response and Feedback Framework for Regional Climate Response

We devise a pattern-aware feedback framework for representing the forced climate response using a suite of Green’s function experiments with solar radiation perturbations. By considering the column energy balance, a comprehensive linear response function (CLRF) for important climate variables and feedback quantities such as moist static energy, sea surface temperature, albedo, cloud optical depth, and lapse rate is learned from Green’s function data. The learned CLRF delineates the effects of the energy diffusion in both the ocean and atmosphere and the pattern-aware feedbacks from the aforementioned radiatively active processes. The CLRF can then be decomposed into forcing–response mode pairs, which are in turn used to construct a reduced-order model describing the dominant dynamics of climate responses. These mode pairs capture nonlocal effects and teleconnections in the climate and thus make the reduced-order model apt for capturing regional features of climate response. A key observation is that the CLRF captures the polar-amplified response as the most excitable mode of the climate system, and this mode is explainable in the data-learned pattern-aware feedback framework. The reduced-order model can be used for predicting the response for a given forcing and for reconstructing the forcing from a given response; we demonstrate these capabilities for multiple independent forcing scenarios.

Feedback↗
DOE OSTI2026

Statistical inference of anomalous thermal transport with uncertainty quantification for interpretive 2D SOL models

The critical task of inferring anomalous cross-field transport coefficients is addressed in simulations of boundary plasmas with fluid models. A workflow for parameter inference in the UEDGE fluid code is developed using Bayesian optimization with parallelized sampling and integrated uncertainty quantification. In this workflow, transport coefficients are inferred by maximizing their posterior probability distribution, which is generally multidimensional and non-Gaussian. Uncertainty quantification is integrated throughout the optimization within the Bayesian framework that combines diagnostic uncertainties and model limitations. As a concrete example, we infer the anomalous electron thermal diffusivity $\chi_\perp$ from an interpretive 2D model describing electron heat transport in the conduction-limited region with radiative power loss. The workflow is first benchmarked against synthetic data and then tested on H-, L-, and I-mode discharges to match their midplane temperature and divertor heat flux profiles. We demonstrate that the workflow efficiently infers diffusivity and its associated uncertainty, generating 2D profiles that match 1D measurements. Future efforts will focus on incorporating more complicated fluid models and analyzing transport coefficients inferred from a large database of experimental results.

Bayesian optimization↗
DOE OSTI2025

Laser beam pointing stabilization using analog position-sensitive diodes

Laser wire scanners have been used for ion beam profile and emittance measurements at the Spallation Neutron Source linear accelerator. Due to propagation distances exceeding 100 m, reliable measurements require laser beam stabilization, previously accomplished with a feedback control loop using a digital camera as a position sensor [Hardin et al., Opt. Express 19, 2874 (2011)]. Here, this paper presents an upgraded pointing stabilization system utilizing analog position-sensitive diodes (PSDs) as the position detector, optimized with an optical diffuser. The new system significantly surpasses the previous system by offering an order-of-magnitude improvement in radiation tolerance and a bandwidth limited only by the burst repetition rate of the laser beam. Operating with a 60-Hz burst mode laser, the new system effectively suppresses laser beam drifts up to 30 Hz, compared to the previous system’s 4 Hz limit. In addition, the amplitude of spectral components below 0.1 Hz was reduced by a factor of more than 100, which is over seven times greater than was achieved by the previous system.

Data acquisition↗
DOE OSTI2025

Be₂C as a neutron moderator for molten salt reactors: A first-principles study of structural, electronic, and defect properties

Beryllium carbide (Be 2 C), valued for its high neutron moderation efficiency and low absorption cross section, is a promising high-temperature neutron moderator for molten salt reactors. Its practical adoption, however, demands significant technological maturation, requiring comprehensive theoretical and experimental studies of its response to different conditions, including high temperature and irradiation. Here, we report initial results on the fundamental properties and radiation-induced defects of Be 2 C, focusing on antisites, vacancies, interstitial atoms, and Frenkel pairs in the Be and C sublattices. Using density functional theory (DFT) and ab initio molecular dynamics (AIMD), we calculate the defects formation and binding energies, evaluating their dependence on the supercell size, charge states, and chemical environment. In general, carbon defects exhibit higher formation energies, greater sensitivity to cell size, and stronger impacts on the density of states compared to beryllium defects, with charged state the effects being more pronounced. Static DFT reveals multiple metastable interstitial configurations, while AIMD identifies ground states as C-C <100> dumbbells and octahedral Be interstitials. In conclusion, the diversity of metastable configurations and defect states complicates the diffusion mechanisms, requiring further molecular dynamics analysis to elucidate the mechanisms and rates of radiation-induced atomic transport, as well as the structural stability of Be2C.

Ab initio modeling↗
DOE OSTI2025

Mixing by internal gravity waves in stars: assessing numerical simulations against theory

ABSTRACT Here we present a study of radial chemical mixing in non-rotating massive main-sequence stars driven by internal gravity waves (IGWs), based on multidimensional hydrodynamical simulations with the fully compressible code MUSIC. We examine two proposed mechanisms of material mixing in stars by IGWs that are commonly quoted, relating to thermal diffusion and sub-wavelength shearing. Thermal diffusion provides a non-restorative effect to the waves, leaving material displaced from its previous equilibrium, while shearing arising within the waves drives weak localized flows, mixing the fluid there. Using IGW spectra from the simulations, we evaluate theoretical predictions of mixing rates due to these mechanisms. We show, for $20\, \mathrm{M}_\odot$ main-sequence stars, that neither of these mechanisms are likely to create mixing sufficient to correct inaccuracies in current stellar evolution models. Furthermore, we compare these predictions to results obtained from Lagrangian tracer particles, following a method recently used for global simulations of stellar interiors to measure mixing by IGWs in their radiative zones. We demonstrate that tracer particle methods face significant numerical challenges in measuring the small diffusion coefficients predicted by the aforementioned theories, for which they are prone to yielding artificially enhanced coefficients. Diffusion coefficients based on such methods are currently used with stellar evolution codes for asteroseismic studies, but should be viewed with caution. Finally, in a case where tracer particles do not suffer from numerical artefacts, we suggest that a diffusion model is not suitable for time-scales typically considered by 2D numerical simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Developing a robust sensor for infrared imaging bolometers

A new type of large area sensor for infrared imaging bolometers has been developed. It replaces the thin and fragile free-standing metal foils, which typically have been used, with a multi-layer coated sapphire (or diamond) substrate. Sapphire is transparent to mid-infrared wavelengths, is robust against transients, and can be thick enough to even be the vacuum window. The primary radiation absorber is still a thin deposited metal layer, but now it is partially insulated from the supporting sapphire substrate by a black (carbon-based) layer, which also acts as a blackbody remitter. Test results indicate 6× more noise equivalent power density (estimated NEPD = 23 W/m 2 at 5 ms camera exposure time, foil temperature decay time 60 ms) for a 2 μm gold-coated sapphire disk compared to estimated NEP = 4 W/m 2 at 1.8 ms exposure time, with foil decay time 420 ms, for a nominal 2.5 μm thick platinum-free-standing foil.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Interpretation of Ion Irradiation and Neutron Irradiation Damage in Additively Manufactured 316 Stainless Steel using Multiscale Modeling

The accelerated adoption of nuclear energy necessitates advanced manufacturing technologies, such as additive manufacturing, to meet heightened supply chain requirements and support innovative reactor technologies. Due to the unique microstructural characteristics of additively manufactured materials under distinct solidification conditions, comprehensive evaluation of their performance in reactor environments is essential. The Advanced Materials and Manufacturing Technologies program under the Department of Energy's Office of Nuclear Energy focuses on understanding the irradiation performance and damage evolution of laser powder bed fusion 316 stainless steel, with an emphasis on integrating ion and neutron irradiation data to accelerate the development and qualification of materials for advanced nuclear reactor applications. While ion irradiation is a cost- and time-effective method, modeling and simulation are required to interpret the data for the broader range of irradiation conditions encountered in advanced reactors. In fiscal year 2025, integrated multiscale modeling and simulations were conducted to assess irradiation damage in additively manufactured 316 stainless steel. Key outcomes include predictions of chromium enrichment at grain boundaries, nickel enrichment at dislocation cell walls and void surfaces, and heterogeneous void evolution under ion and neutron irradiation conditions. Cluster dynamics simulations revealed the coarsening of voids at high irradiation temperatures and the suppression of void growth by high network dislocation density, while also demonstrating significant growth and coarsening of voids and self-interstitial atom loops at low dose rates. Machine learning-accelerated atomistic simulations highlighted the impact of the local environment and chromium concentration on vacancy diffusivity, providing key insights on the influence of composition on void swelling and radiation-induced segregation. Additionally, molecular dynamics simulations demonstrated the presence of defect production bias and a significant effect of carbon content on defect cluster behavior. These combined efforts aim to predict the performance of additively manufactured materials under various reactor conditions, supporting their qualification for nuclear reactor applications by interpreting ion irradiation data. This report underscores the potential of integrated multiscale modeling to analyze ion irradiation data in the effort to accelerate the qualification of additively manufactured materials for nuclear reactor components.

316 stainless steel↗
DOE OSTI2025

CO2 Profiling System for CO2 Storage (a1-level)

The Southern Great Plains (SGP) carbon dioxide flux (CO2FLUX) measurement systems provide half-hour average fluxes of CO2, H2O (latent heat), sensible heat, and momentum. The systems use the eddy covariance technique, which computes the fluxes from the vertical wind speed in combination with the concentrations of CO2 and H2O, temperature, and horizontal wind speed, respectively. A 3D sonic anemometer obtains the wind components and the temperature, while an infrared gas analyzer measures CO2 and H2O. A sub-system also measures half-hour averages of radiation, meteorological, and soil measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Assessing Uncertainty in Solar Measurements: Key Findings From NLR's SUNI Application Across 89 Stations

The Solar Uncertainty Integrator (SUNI) study was developed by the National Laboratory of the Rockies (NLR's) to provide a standardized "bulk uncertainty processing" method for solar irradiance data, which are essential for the successful deployment of solar energy systems. This poster provides an overview of key findings from NLR's SUNI application across 89 stations.

14 SOLAR ENERGY↗
DOE OSTI2024

Low Thermal Conductivity and Diffusivity at High Temperatures Using Stable High–Entropy Spinel Oxide Nanoparticles

The realization of low thermal conductivity at high temperatures (0.11 W m –1 K –1 800 °C) in ambient air in a porous solid thermal insulation material, using stable packed nanoparticles of high-entropy spinel oxide with 8 cations (HESO-8 NPs) with a relatively high packing density of ≈50%, is reported. The high-density HESO-8 NP pellets possess around 1000-fold lower thermal diffusivity than that of air, resulting in much slower heat propagation when subjected to a transient heat flux. The low thermal conductivity and diffusivity are realized by suppressing all three modes of heat transfer, namely solid conduction, gas conduction, and thermal radiation, via stable nanoconstriction and infrared-absorbing nature of the HESO-8 NPs, which are enabled by remarkable microstructural stability against coarsening at high temperatures due to the high entropy. Furthermore, this work can elucidate the design of the next-generation high-temperature thermal insulation materials using high-entropy ceramic nanostructures.

thermal insulation↗
DOE OSTI2026

A Proof of the Asymptotic Variance of Path Length Estimators for Single-Collision Monte Carlo Source Iteration in the Thick Diffusion Limit

Here, we prove a theorem relating the variance of path length estimators for single-collision Monte Carlo source iteration to a parameter that becomes infinitesimally small in an important physical regime arising in radiative transfer. In our usage, “single-collision Monte Carlo source iteration” refers to Monte Carlo Boltzmann transport methods in which each Monte Carlo particle history includes no more than a single collision, and the physics of multiple scattering is modeled by lagging the scattering source term and iterating until this term converges. Our theorem can be used to construct variance reduction techniques which improve the order of the estimator variance. This enables calculations that would otherwise require impractically large sample sizes to achieve practical estimator uncertainties. We believe this is the first postulation of a theorem relating estimator variance to a limiting case parameter for single-collision Monte Carlo source iteration, and the first proof of such a theorem. We illustrate the theorem’s value with an example in which the authors of a transport method used the theorem to design a variance reduction technique that improved the uncertainty of their solution by a factor of about 500 for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material.

Mathematics and Computing↗
DOE OSTI2024

Understanding and Controlling the Formation of Nonradiative Defects in Blue Organic Triplet Emitters

Phosphorescent organic light-emitting devices (PHOLEDs) suffer from destructive molecular processes due to triplet-polaron and triplet-triplet annihilation. These processes are energetically driven and hence are particularly active in decreasing the lifetime of blue PHOLEDs. It has recently been shown that increasing triplet radiative rates via the Purcell effect effectively extends the device operational lifetime by reducing the triplet radiative lifetime, thus decreasing their density and the probability of triplet-annihilation reactions. We provide an analytical framework using Marcus theory to explain the observed, approximately exponential relationship between exciton energy and device lifetime. From transient drift-diffusion dynamics, we show that the Purcell effect reduces the exciton density in the steady state and increases the photoluminescent yield, thereby reducing defect generation rates and extending the device lifetime. We control the radiative rate of excitons in microcavities, thereby connecting the exciton energy and decay rates with the observed device lifetime. The device lifetime is shown to follow a power-law dependence on the Purcell factor ( PF m ) with m = 1.5 to 2.5, dependent on the TTA-to-TPA ratio and photoluminescence quantum yield. From our analysis, a fivefold increase in PF has the potential to extend the blue PHOLED lifetime by up to 2 orders of magnitude, making the blue PHOLED lifetime comparable to that of state-of-the-art green PHOLEDs. Published by the American Physical Society 2024

Zhao, Haonan (ORCID:0000000190584422)↗
DOE OSTI2024

Spectral and Temperature-Dependent Optical Metrology: Towards More Robust, Effective and Durable Materials for Concentrated Solar Power

The primary objective of this project is to develop reliable and standardized spectroscopic measurement techniques to determine radiative properties, specifically the emittance and reflectance, of materials relevant for the next generation (Gen3) concentrated solar power (CSP) technologies. Experimental measurements will span near- and mid-infrared wavelengths (1–20 µm) with emphasis on quantifying the influences of: (1) operating temperatures of 25–1000 °C, (2) thermal cycling, and (3) environmental exposure of materials during operation (vacuum/air). A secondary goal is to develop open-access and digitized databases to host and share experimental data, together with standardized measurement protocols and operating procedures to determine optical properties of materials. This project will also include reasonable emphasis on developing predictive modeling tools to augment experimental data to extract more fundamental and material-specific radiative properties.

14 SOLAR ENERGY↗
DOE OSTI2024

Simulation of plasma and neutral transport in PISCES-RF using SOLPS-ITER

In this research, the fluid plasma transport code SOLPS-ITER is applied and validated against experimental data from the plasma interaction surface component experimental station (PISCES)-RF linear plasma device to establish a physics basis for plasma and neutral transport in its two magnetic field (B-field) geometry setups-(1)the cusp and (2) non-cusp or linear B-field. The main focus of this study is to understand (1) radial plasma transport (2) heat and particle loads on the upstream dump and downstream target plate, and (3) the physics of plasma-neutral interactions in PISCES-RF. The simulation setup adheres to typical PISCES-RF experimental conditions, with a 2D helicon power deposition profile as an input heating source. SOLPS-ITER simulations reproduce experimental conditions with the Bohm diffusion model for both B-field configurations of the PISCES-RF experiment. Major energy loss channels include neutral radiation and power deposited on the wall and dump plate, with only 1% of the input power reaching the target. The ionization front is well confined near the dump plate due to the heating and puffing regions. Additionally, SOLPS-ITER simulation results are also found to be in very good agreement with the particle-in-cell calculations using the code-PICOS++ which supports the validity of SOLPS in low collisionality regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Disentangling core and edge mechanisms of the density limit in DIII-D negative triangularity plasmas

The density limit is investigated in the DIII-D negative triangularity plasmas which lack a standard H-mode edge. We find the limit may not be a singular disruptive boundary but a multifaceted density saturation phenomenon governed by distinct core and edge transport mechanisms. Sustained, non-disruptive operation is achieved at densities up to 1.8 times the Greenwald limit ($n_\mathrm{G}$) until the termination of auxiliary heating. Systematic power scans show distinct power scalings for the core ($n_e \propto P_\mathrm{SOL}^{0.27\pm0.03}$) and edge ($n_e \propto P_\mathrm{SOL}^{0.42\pm0.04}$) density limits. The edge density saturation is triggered by the onset of a non-disruptive, high-field side radiation front and the associated cooling, which clamps the edge density below . In contrast, the core density continues to rise until it saturates, a state characterized by enhanced core turbulence. Core transport evolves from a diffusive to an intermittent, avalanche-like state, as indicated by heavy-tailed probability density functions (kurtosis ≈ 6), increased Hurst exponents, and a $1/f$-type power spectrum. These findings suggest that the density limit in the low-confinement regime is determined by a combination of edge radiative cooling and core turbulent transport. This distinction provides separate targets for control strategies aimed at extending the operational space of future fusion devices.

density limit↗