Search NASA⌕ Search

SEARCH · Search NASA

Results for “Radioactive beams”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Performance evaluation of the SPES FEBIAD ion source

SPES (Selective Production of Exotic Species) is the Radioactive Ion Beam (RIB) facility that is currently in the installation phase at the Istituto Nazionale di Fisica Nucleare in the Laboratori Nazionali di Legnaro (LNL-INFN). The main purpose of the facility is to deliver neutron-rich radioactive beams with a range of mass between 60 and 160 amu produced as fission products originated within a Uranium Carbide (UC x ) target impinged by high energy protons (40–70 MeV). In the last few years, the SPES group and their collaborators have focused on multiple aspects: development of various ISOL targets, ion sources, a high-power beam dump, versatile Front-End designs, primary proton beam and RIB diagnostics, design of beam optic components, and remote target handling. The development and optimization of ionization sources represents one of the most important R&D activities. The collaboration between SPES and ISOLDE (CERN) groups has enabled the evaluation of the performances of a novel FEBIAD ion source taking advantage of the ISOLDE off-line Front-End. In this paper, the results of efficiency and transversal emittance measurements of the new SPES FEBIAD ion source are presented and discussed. Particular attention is dedicated to the description of the experimental setup and to the comparison of experimental data with simulation to promote the reproducibility of the experimental tests with other types of sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

First measurement of proton decay from a transfer reaction to 21 Na

Decay protons from excited states in Na 21 populated through a previously reported Mg 24 ( p , α ) Na 21 transfer reaction [Cha et al. , Phys. Rev. C 96 , 025810 (2017) ] were analyzed to extract the proton branching ratios of the energy levels. Additionally, by utilizing 31-MeV proton beams from the Holifield Radioactive Ion Beam Facility of Oak Ridge National Laboratory and isotopically enriched Mg 24 solid targets, the decay protons were detected in coincidence with α particles from the ( p , α ) reaction using a silicon strip detector array. Proton decay branching ratios of several Na 21 levels were deduced for the p 0 and p 1 decay channels to the ground and first excited states in Ne 20 , respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Proton branching ratios of 23 Mg levels

Background: The anomalous 22 Ne abundance measured in certain presolar graphite grains is thought to arise from the decay of 22 Na that was synthesized at high temperatures in core-collapse supernovae. To better interpret this abundance anomaly, the primary destruction mechanism of 22 Na, the 22 Na(p,γ) 23 Mg reaction, must be better understood. Purpose: Determine proton branching ratios of several 23 Mg excited states that play a role in the high-temperature 22 Na(p,γ) 23 Mg reaction rate. Methods: Particle decays of 23 Mg excited states populated with the previously reported 24 Mg(p,d) 23 Mg transfer reaction measurement [Kwag et al., Eur. Phys. J. A 56, 108 (2020)] were analyzed to extract proton branching ratios. The reaction was studied using a 31-MeV proton beam from the Holifield Radioactive Ion Beam Facility of Oak Ridge National Laboratory and 24 Mg solid targets. Results: Proton branching ratios of several 23 Mg excited states in the energy range of Ex = 8.044 - 9.642 MeV were experimentally determined for the first time for the p0 and p1'(p1+p2+p3) decay channels. Conclusions: These new branching ratios for 23 Mg levels can provide an experimental foundation for an improved high-temperature rate of the 22 Na(p,γ) 23 Mg reaction needed to understand production of anomalously high 22 Ne abundance in core-collapse supernovae.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Observation of new neutron-rich isotopes in the vicinity of Zr 110

Neutron-rich radioactive isotope (RI) beams in the vicinity of 110 Zr were produced using the in-flight fission of a 345-MeV/nucleon 238 U beam at the RIKEN Radioactive Isotope Beam Factory. Here, the RI beams were separated in flight by the large-acceptance two-stage fragment separator BigRIPS. Isotopes were clearly identified in a low-background particle-identification plot, which was obtained from the measurements of time of flight, magnetic rigidity, and energy loss using beam-line detectors placed in the BigRIPS separator and the ZeroDegree spectrometer. Nine new isotopes, 101 Br, 102 Kr, 105,106 Rb, 108 Sr, 110,111 Y, 114 Zr, and 117 Nb, are reported for the first time, with their measured production cross sections compared with the extrapolations of lighter isotopes down to the femtobarn regime.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Fast switching magnet for heavy ion beam separation

This paper presents the design for a switching magnet capable of deflecting 6.5 MeV/u heavy-ion beams with mass-to-charge ratio of 7 by 10 degrees. This magnet can produce variable flat-top pulses from 1 to 30 ms with rise and fall times of less than 0.5 ms at a variable duty cycle of 3–91% into a heavily inductive load. The magnet has a laminated, iron dominated, H-shaped core. Directly-cooled copper pancake coils energize the magnet. We present the magnet design considerations, including the results of extensive computer modeling. Finally, we also present the conceptual engineering design and the studies of magnet yoke fabrication.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Heavy ion beam physics at Facility for Rare Isotope Beams

The Facility for Rare Isotope Beams (FRIB) will be the world's premier rare-isotope beam facility. Experiments with the majority (~80%) of the isotope predicted to exist will become available. The FRIB facility is based on a superconducting (SC) heavy ion linac with output energy above 200 MeV/u for any ions at beam power of 400 kW. FRIB includes a target facility for in-flight production of rare isotopes. A three-stage fragment separator will be used to prepare fast rare isotope beams with high-purity for nuclear physics experiments. The installation work of the accelerator and experimental systems is approaching completion and multi-stage beam commissioning activities started in summer 2017 with expected project completion in early 2022. In conclusion, the commencement of operation for users' experiments is planned immediately following the project completion.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Anode sensitivity calibration of photomultiplier tubes used as a readout of the ELOSS detector

We present and discuss the methodology and results for an anode sensitivity calibration of Photomultiplier Tubes (PMTs) that serve as the optical readout of the Energy Loss Optical Scintillation System (ELOSS). The ELOSS detector, under development at the Facility for Rare Isotope Beams (FRIB), is a gaseous Xe scintillation-based detector designed to identify the atomic number (Z) of nuclear reaction fragments by energy-loss measurement. Variation in the anode sensitivity from tube to tube of commercially available PMTs limits ELOSS from reaching its ultimate Z resolution. A methodical approach to calibrating PMT anode sensitivities to a single target value by systematic PMT gain corrections is presented. Although the calibration process is discussed in terms of its impact on ELOSS performance, the presented method is applicable to any optical detector system composed of a large number of PMTs needing anode sensitivity calibration.

Instrumentation for heavy-ion accelerators↗
DOE OSTI2026

Physical thickness characterization of the FRIB production targets

The FRIB heavy-ion accelerator, commissioned in 2022, is a leading facility for producing rare isotope beams (RIBs) and exploring nuclei beyond the limits of stability. These RIBs are produced via reactions between stable primary beams and a graphite target. Approximately 20–40% of the primary beam power is deposited in the target, requiring efficient thermal dissipation. Currently, FRIB operates with a primary beam power of up to 20 kW. To enhance thermal dissipation efficiency, a single-slice rotating graphite target with a diameter of approximately 30 cm is employed. The effective target region is a 1 cm-wide outer rim of the graphite disc. To achieve high RIB production rates, the areal thickness variation must be constrained within 2%. This paper presents physical thickness characterizations of FRIB production targets with various nominal thicknesses, measured using a custom-built non-contact thickness measurement apparatus.

Instrumentation for radioactive beams (fragmentati↗
DOE OSTI2026

Emissivity measurements of CuCrZr alloy

The Facility for Rare Isotope Beams (FRIB) heavy-ion accelerator, in user operation since 2022, produces rare isotope beams via interactions of high-intensity stable ion beams with a graphite production target. Approximately 20–40% of the primary beam power is deposited in the target, while the remaining 60–80% is absorbed by the beam dump. The minichannel beam dump (MCBD), currently operated at 20 kW and designed for operation up to 50 kW, uses CuCrZr alloy absorber plates. Thermal validation and thermal cycling tests of the MCBD were conducted at the Applied Research Laboratory (ARL) at Pennsylvania State University. Temperature measurements were obtained from an infrared (IR) camera. Since accurate temperature determination requires reliable emissivity values, the emissivity of CuCrZr was measured using the IR camera validated against thermocouple reference temperatures up to approximately 650 °C. The measurements were conducted under a vacuum level of approximately 10 -5 torr to minimize emissivity variations due to surface oxidation. The emissivity of CuCrZr was determined to be 0.057 ± 0.009 using a constant fit to the measured data over the surface temperature range from 100–650 °C.

Accelerator Subsystems and Technologies↗
DOE OSTI2022

β decay of neutron-rich 76 Cu and the structure of 76 Zn

In this work, the β decay of 76 Cu to the levels of 76 Zn was studied at the Holifield Radioactive Ion Beam Facility (HRIBF) at Oak Ridge National Lab (ORNL). A purified 76 Cu beam was developed and data were recorded for the decay of the A=76 decay chain using four high-purity germanium (HPGe) clover detectors at the Low-energy Radioactive Ion Beam Spectroscopy Station (LeRIBSS). In this measurement, data on γ-ray emission following β decay, including βγ and γγ coincidences, were collected and γγ spectra were analyzed to identify the statistically significant coincidences. From this analysis, we propose a level scheme for 76 Zn which contains a total of 59 energy levels up to 6.0 MeV containing 105 γ rays. We have identified an additional 53 γ rays associated with this decay which could not be place in the decay scheme due to insufficient coincidence information or no energy match to identified levels. No γ rays from states in 75 Zn fed in the delayed-neutron branch were observed even though other γ rays in the A=75 decay chain were observed. Spin and parity assignments are proposed for some levels based on comparison to systematics and shell model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

First Observation of Cyclotron Radiation from MeV-Scale e ± following Nuclear β Decay

We present an apparatus for detection of cyclotron radiation yielding a frequency-based β ± kinetic energy determination in the 5 keV to 2.1 MeV range, characteristic of nuclear β decays. The cyclotron frequency of the radiating β particles in a magnetic field is used to determine the β energy precisely. Our work establishes the foundation to apply the cyclotron radiation emission spectroscopy (CRES) technique, developed by the Project 8 Collaboration, far beyond the 18-keV tritium endpoint region. We report initial measurements of β – ’s from 6 He and β + ’s from 19 Ne decays to demonstrate the broadband response of our detection system and assess potential systematic uncertainties for β spectroscopy over the full (MeV) energy range. To our knowledge, this is the first direct observation of cyclotron radiation from individual highly relativistic β’s in a waveguide. Furthermore, this work establishes the application of CRES to a variety of nuclei, opening its reach to searches for new physics beyond the TeV scale via precision β-decay measurements.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Construction of St. Benedict

The Superallowed Transition Beta-Neutrino Decay Ion Coincidence Trap (St. Benedict) is currently under construction at the University of Notre Dame Nuclear Science Laboratory. It is designed to measure the beta-neutrino angular correlation parameter in superallowed mixed beta-decay transitions between mirror nuclei in order to extract the Fermi-to-Gamow Teller mixing ratio and test theoretical corrections entering in the determination of the V ud element of the Cabibbo–Kobayashi–Maskawa quark mixing matrix. St. Benedict includes a large volume gas catcher to thermalize the radioactive ion beam from TwinSol, a differentially-pumped extraction system, a radiofrequency quadrupole ion cooler and buncher, and a Paul trap for the observation and detection of the β decay products. Finally, the status of each of these components will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

First Proton-Induced Cross Sections on a Stored Rare Ion Beam: Measurement of Te 118 ( p , γ ) for Explosive Nucleosynthesis

We present the first nuclear cross-section measurements of (p,$\gamma$) and (p,n) reactions on 118 Te at energies relevant for the $\gamma$-process nucleosynthesis. Absolute cross-section values for center-of-mass energies of 6, 7 and 10 MeV are provided, together with a theoretical extrapolation to the Gamow window. This experiment marks the first time that direct proton-induced reactions have been measured on a radioactive ion beam at the Experimental Storage Ring (ESR) at GSI, Darmstadt. This paves the way for a large variety of measurements, delivering new constraints for explosive nucleosynthesis and for physics beyond nuclear stability.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

BlueSTEAl: A pair of silicon arrays and a zero-degree phoswich detector for studies of scattering and reactions in inverse kinematics

BlueSTEAl, the Blue (aluminum chamber of) Silicon TElescope Arrays for light nuclei, has been developed to study direct reactions in inverse kinematics, as well as scattering and breakup reactions using radioactive ion beams. It is a detector system consisting of a pair of annular silicon detector arrays and a zero-degree phoswich plastic scintillator. For typical binary reaction studies in inverse kinematics, light ions are detected by the Si array in coincidence with heavy recoils detected by the phoswich placed at the focal-plane of a zero-degree magnetic spectrometer. The Si array can also be used to detect light nuclei such as beryllium and carbon with clear isotope separation, while the phoswich can also be placed at zero degrees without a spectrometer and used as a high-efficiency beam counting monitor with particle identification capability at the rate of up to ~5 × 10 4 particles per second. This paper reports on the capabilities of BlueSTEAl as determined by recent experiments performed at the Texas A&M Cyclotron Institute. Furthermore, the device is also anticipated to be used in future experiments at other radioactive ion beam facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Measurement of the 25 Al(𝑑,𝑛)⁢ 26 Si reaction and impact on the 25 Al⁢(𝑝,𝛾)⁢ 26 Si reaction rate

The 25 Al(p,γ) 26 Si reaction plays a key role in nucleosynthesis pathways that influence the galactic abundance of 26 Al. A more precise determination of the proton strength of the lowest ℓ = 0 proton resonance in 26 Si is needed to improve reaction-rate calculations. This work measures the 25 Al(d,n) 26 Si proton-transfer reaction in inverse kinematics using a radioactive ion beam at RESOLUT, determining excitation energies and cross sections for the lowest ℓ = 0 resonance associated with the 3 + 3 state at 5.92(2) MeV. Coupled-reaction-channels calculations (FRESCO) are used to extract the ℓ = 0 spectroscopic factor and the corresponding proton width, yielding Γₚ = 2.19(45) eV and a (p,γ) resonance strength of 26(10) meV. This resonance is found to dominate the 25 Al(p,γ) 26 Si reaction rate above 0.2 GK.

20 ≤ A ≤ 38↗
DOE OSTI2022

First observation of isomeric states in 111 Zr, 113 Nb, and 115 Mo

Isomeric states in the neutron-rich nuclei 111 Zr [T 1/2 =0.10 (7) μs] , 113 Nb [T 1/2 =0.7 (4) μs], 115 Mo [T 1/2 =46 (3) μs] were first identified at the Radioactive Ion Beam Factory (RIBF) of RIKEN by using in-flight fission and fragmentation of a 238 U beam at an energy of 345 MeV/u. Here is a brief report of the γ transitions de-exciting from isomeric states and half-lives measurements, which provides the first spectroscopy in the nuclear region of prolate-to-oblate shape-phase transition around mass A ≈110.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Structure studies of 13 Be from the 12 Be ⁢(𝑑,𝑝) reaction in inverse kinematics on a solid deuteron target

The low-lying structure of 13 Be has remained an enigma for decades. Despite numerous experimental and theoretical studies, large inconsistencies remain. Being both unbound and one neutron away from 14 Be, the heaviest bound beryllium nucleus, 13 Be is difficult to study through simple reactions with weak radioactive-ion beams or more complex reactions with stable-ion beams. Here, we present the results of a study using the 12 Be (𝑑,𝑝)⁢ 13 Be reaction in inverse kinematics using a 9.5 MeV per nucleon 12 Be beam from the ISAC-II facility. The solid deuteron target of IRIS was used to achieve an increased areal thickness compared to conventional deuterated polyethylene targets. The 𝑄-value spectrum below −4.4 MeV was analyzed using a Bayesian method with geant4 simulations. A three-point angular distribution with the same 𝑄-value gate was fit with a mixture of 𝑠- and 𝑝-wave, 𝑠- and 𝑑-wave, or pure 𝑝-wave transfer. The 𝑄-value spectrum was also compared with geant simulations obtained using the energies and widths of states reported in four previous works. As a result, it was found that our results are incompatible with works that revealed a wide 5/2 + resonance but shows better agreement with ones that reported a narrower width.

6 ≤ A ≤ 19↗
DOE OSTI2020

Isomeric and beta-decay spectroscopy of 173,174 Ho

β-decay spectroscopy of 173,174 Ho (Z = 67, N = 106,107) was conducted at Radioactive Isotope Beam Factory at RIKEN by using in-flight fission of a 345-MeV/u 238 U primary beam. A previously unreported isomeric state at 405 keV with half-life of 3.7(12) μs and a spin and parity of (3/2 + ) is identified in 173 Ho. Moreover, a new state with a spin and parity of 9 - was discovered in 174 Er. The experimental log ft values of 5.84(20) and 5.25(18) suggest an allowed-hindered β decay from the ground state of 174 Ho to the K π = 8 - isomeric state in 174 Er. Configuration-constrained potential energy surface (PES) calculations were performed and the predictions are in reasonable agreement with the experimental results.

150 ≤ A ≤ 189↗