Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rate formulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Development of Novel Biodegradable Enrofloxacin–Silica Composite for In Vitro Drug Release Kinetic Studies

A sustained drug delivery system is developed by using nonionic polymer to formulate drug release rate from silica capsules. To serve this purpose, silica capsules filled with poly(ethylene glycol) (PEG) were incorporated with a veterinary antibiotic drug enrofloxacin (ENF); as a model hydrophobic drug by using a general and facile sol–gel route. The physicochemical properties of the prepared drug-loaded composites were investigated by scanning electron microscope (SEM), nitrogen adsorption, Fourier transform infrared spectroscopy and thermal analysis (TGA). The impact of the media’s ionic strength on the drug release was evaluated over a range of 0–0.4 M to simulate the gastrointestinal feed in two physiological pH conditions. Sodium chloride was applied for ionic concentration adjustment due to its ability to salt out polymers in the midrange of the lyotropic series. Simultaneously, the drug release kinetics was evaluated by fitting experimental data to common empirical (zero-order, first order and Higuchi) and semi-empirical (Ritger–Peppas and Sahlin–Peppas) models. The drug release kinetics from capsules revealed a non-Fickian diffusion and pure relaxation-controlled release. Of these models, Sahlin–Peppas equation best fit the release data of ENF. To determine the best model, non-linear regressions were carried out.

36 MATERIALS SCIENCE↗

Magnetic Properties of Electroformed Ni and Ni-Fe for Micromagnetic MEMS Applications

This paper reports a new technique which is based on electroforming process for high permeability Ni and Ni-Fe alloy. The magnetic properties of Ni and Ni-Fe alloy are investigated as a function of plating current density via scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and vibrating sample magnetometer (VSM). Concentration-dependent kinetics is used to formulate the deposition rate and also the same is verified by using finite element analysis tool COMSOL Multiphysics. Several experiments are performed to derive the relation between electroplating parameters and magnetic properties. The process conditions are optimized to develop high permeability (∼16000) Ni-Fe alloy (85.71–14.29 %). The higher current density shows a monotonically increasing behavior of relative permeability (μ{sub r}). In addition, the B-H curves indicate that the saturation magnetization (B{sub sat}) increases and coercivity decreases with increasing plating current density. Our experimental data confirms that the higher current density increase the softness of Ni. The observed properties of Ni and Ni-Fe based on experimental results can be used to study the magnetic behavior of micromagnetic sensors and large force actuators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Entropy and stability of phase synchronisation of oscillators on networks

I examine the role of entropy in the transition from incoherence to phase synchronisation in the Kuramoto model of N coupled phase oscillators on a general undirected network. In a Hamiltonian ‘action-angle’ formulation, auxiliary variables J{sub i} combine with the phases θ{sub i} to determine a conserved system with a 2N dimensional phase space. In the vicinity of the fixed point for phase synchronisation, θ{sub i}≈θ{sub j}, which is known to be stable, the auxiliary variables J{sub i} exhibit instability. This manifests Liouville’s Theorem in the phase synchronised regime in that contraction in the θ{sub i} parts of phase space are compensated for by expansion in the auxiliary dimensions. I formulate an entropy rate based on the projection of the J{sub i} onto eigenvectors of the graph Laplacian that satisfies Pesin’s Theorem. This leads to the insight that the evolution to phase synchronisation of the Kuramoto model is equivalent to the approach to a state of monotonically increasing entropy. Indeed, for unequal intrinsic frequencies on the nodes, the networks that achieve the closest to exact phase synchronisation are those which enjoy the highest entropy production. I compare numerical results for a range of networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THERMAL AND RADIATIVE ACTIVE GALACTIC NUCLEUS FEEDBACK HAVE A LIMITED IMPACT ON STAR FORMATION IN HIGH-REDSHIFT GALAXIES

The effects of active galactic nuclei (AGNs) on their host galaxies depend on the coupling between the injected energy and the interstellar medium (ISM). Here, we model and quantify the impact of long-range AGN ionizing radiation—in addition to the often considered small-scale energy deposition—on the physical state of the multi-phase ISM of the host galaxy and on its total star formation rate (SFR). We formulate an AGN spectral energy distribution matched with observations, which we use with the radiative transfer (RT) code Cloudy to compute AGN ionization in a simulated high-redshift disk galaxy. We use a high-resolution (∼6 pc) simulation including standard thermal AGN feedback and calculate RT in post-processing. Surprisingly, while these models produce significant AGN-driven outflows, we find that AGN ionizing radiation and heating reduce the SFR by a few percent at most for a quasar luminosity (L {sub bol} = 10{sup 46.5} erg s{sup –1}). Although the circumgalactic gaseous halo can be kept almost entirely ionized by the AGN, most star-forming clouds (n ≳ 10{sup 2} {sup –} {sup 3} cm{sup –3}) and even the reservoirs of cool atomic gas (n ∼ 0.3-10 cm{sup –3})—which are the sites of future star formation (SF; 100-200 Myr), are generally too dense to be significantly affected. Our analysis ignores any absorption from a putative torus, making our results upper limits on the effects of ionizing radiation. Therefore, while the AGN-driven outflows can remove substantial amounts of gas in the long term, the impact of AGN feedback on the SF efficiency in the interstellar gas in high-redshift galaxies is marginal, even when long-range radiative effects are accounted for.

79 ASTRONOMY AND ASTROPHYSICS↗

Ionizing radiation effects in SONOS-based neuromorphic inference accelerators

Here, we evaluate the sensitivity of neuromorphic inference accelerators based on Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) charge trap memory arrays to total ionizing dose (TID) effects. Data retention statistics were collected for 16 Mbit of 40 nm SONOS digital memory exposed to ionizing radiation from a Co-60 source, showing good retention of the bits up to the maximum dose of 500 krad(Si). Using this data, we formulate a rate-equation-based model for the TID response of trapped charge carriers in the ONO stack, and predict the effect of TID on intermediate device states between ‘program’ and ‘erase’. This model is then used to simulate arrays of low-power, analog SONOS devices that store 8-bit neural network weights and support in situ matrix-vector multiplication. We evaluate the accuracy of the irradiated SONOS-based inference accelerator on two image recognition tasks – CIFAR-10 and the challenging ImageNet dataset – using state-of-the-art convolutional neural networks, such as ResNet-50. We find that across the datasets and neural networks evaluated, the accelerator tolerates a maximum TID between 10 krad(Si) and 100 krad(Si), with deeper networks being more susceptible to accuracy losses due to TID.

43 PARTICLE ACCELERATORS↗

Elucidation of Separator Effect on Energy Density of Li-Ion Batteries

Fast charging of batteries is the key to increase the adoption of electric vehicles. All the components of a battery: anode, cathode, electrolyte and separator, contribute to the limiting factors of fast charging. While majority efforts are focused on novel electrode architecture and electrolyte formulation for high rate capabilities, studies on separators are mostly pertaining to their mechanical and physical properties and little attention has been paid to their effect on rate performance. In this study, we report a comprehensive analysis of the physical properties, electrochemical performance and high rate capabilities of the widely used battery separator Celgard 2325 and Celgard 2500. It is demonstrated that the Celgard 2500 has better electrolyte wettability and ~2 × in electrolyte uptake, and 2.23 Ω/cm 2 less in resistance. Consequently, 57% and 47% improvement in capacity is obtained when charged at 2C and 3C, respectively. This indicates that separator can also play an important role in enabling fast charging for lithium-ion batteries.

25 ENERGY STORAGE↗

Modeling the U.S. Western Electric Interconnection to Understand the Consequences of Hydrometeorological Extremes and Options for Risk Mitigation

Electricity grid operators around the world face a dual challenge; withstanding increasingly severe weather and the longer term impacts of climate change, while simultaneously decarbonizing. Extreme weather events such as heat waves and droughts are rising in both severity and frequency, which is threatening the reliability of electricity grids through increased demand, generation capacity losses, and equipment failures. Consequently, incorporating hydrometeorological stressors into computational power systems analysis is becoming an even more critical tool in long term planning and short term operations. However, there is a general lack of open-source customizable grid simulation software capable of exhaustively stress testing the grid under hydrometeorological uncertainty, and/or examining potential risk mitigation pathways. A related, persistent challenge for power system modelers is striking an appropriate balance between model fidelity (e.g. spatial scale and time resolution) and computational tractability (wall clock run-time). In this study, we are proposing a solution to this problem with open-source software that allows users to seamlessly customize the scale and track the accuracy of grid operations models. Our approach allows users to search over numerous model parameters (network topology, mathematical formulation, economic hurdle rates, and transmission line scaling) to identify model instantiations that accommodate experimental design. Further, we use this approach to demonstrate the importance of including extreme weather events in model validation and model selection. Focusing on the occurrence of heatwaves and droughts in the U.S. Western Interconnection, we examine role of extreme events in balancing tradeoffs between model fidelity and run-time at the model design stage.

Economics↗

An analytical model of nonproportional scintillator light yield in terms of recombination rates

Analytical expressions for the local light yield as a function of the local deposited energy (-dE/dx) and total scintillation yield integrated over the track of an electron of initial energy E are derived from radiative and/or nonradiative rates of first through third order in density of electronic excitations. The model is formulated in terms of rate constants, some of which can be determined independently from time-resolved spectroscopy and others estimated from measured light yield efficiency as a constraint assumed to apply in each kinetic order. The rates and parameters are used in the theory to calculate scintillation yield versus primary electron energy for comparison to published experimental results on four scintillators. Influence of the track radius on the yield is also discussed. Results are found to be qualitatively consistent with the observed scintillation light yield. The theory can be applied to any scintillator if the rates of the radiative and nonradiative processes are known.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Conversion of CO 2 into Commercial Materials Using Carbon Feedstocks

In this project, our research focused on developing reaction chemistry that would support using carbon as a reductant for CO 2 utilization that would permit CO 2 consumption on a scale that would match or exceed anthropomorphic CO 2 generation for energy production from fossil fuels. Armed with the knowledge that reactions attempting to produce compounds with an energy content greater than CO 2 would be thermodynamically challenged and/or require significant amounts of energy, we developed a potential process that utilized a solid carbon source and recycled the carbon to effectively provide infinite time for the carbon to react. During testing of different carbon sources, we found a wide range of reaction rates. Biomass-derived samples had the most reactivity and coals and petcoke had the lowest. Because we had anticipated this challenge, we recognized that a catalyst would be necessary to improve reaction rates and conversion. From the data analysis of carbon samples, we recognized that alkali metals improved the reaction rate. Through parametric testing of catalyst formulations we were able to increase the reaction rate with petcoke by a factor of >70. Our efforts to identify the reaction mechanism to assist in improving the catalyst formulation demonstrated that the catalyst was catalyzing the extraction of oxygen from CO 2 and using this extracted oxygen to oxidize carbon. This was a significant discovery in that if we could modify the catalyst formulation to permit controlled the oxidation, we would have a very power selective oxidation process. With selective oxidation, CO 2 utilization could be effective used as one of the process steps in making many of the large volume commodity chemicals that support our modern lifestyles. The key challenges for incorporating these functionalities into the catalyst formulation were to make the oxidation selective and lower the temperature required for catalytic activity. We identified four catalyst families that had the potential to meet these challenges. Initial screening of the catalyst families did show that the reduction/oxidation activity did occur at lower temperatures and that these catalysts were able to cause carbon chain growth as well as C—C cleavage. A preliminary techno-economic feasibility of using petcoke/catalyst to produce a CO-rich syngas product was completed and showed significant economic promise. Testing of the different catalyst families demonstrated that Catalyst A was able to stably produce 5 sccm of ethylene/gram of catalyst at 900°C for one hour. For dry methane reforming, our Catalyst 4 was able to achieve production rates of > 10 sccm of CO and > 3 sccm of H2 per gram of catalyst at 600°C and 350 psig. Based on these developments, the potential for CO 2 utilization in the production of large volume commodity chemicals is very promising.

10 SYNTHETIC FUELS↗

DETERMINATION OF HLW GLASS MELT RATE USING X-RAY COMPUTED TOMOGRAPHY

The purpose of the high-level waste (HLW) glass melt rate study is two-fold: (1) to gain a better understanding of the impact of feed chemistry on melt rate through bench-scale testing, and (2) to develop a predictive tool for melt rate in support of the on-going frit development efforts for the Defense Waste Processing Facility (DWPF). In particular, the focus is on predicting relative melt rates, not the absolute melt rates, of various HLW glass formulations solely based on feed chemistry, i.e., the chemistry of both waste and glass-forming frit for DWPF. Critical to the successful melt rate modeling is the accurate determination of the melting rates of various HLW glass formulations. The baseline procedure being used at the Savannah River National Laboratory (SRNL) is to; (1) heat a 4 inch-diameter stainless steel beaker containing a mixture of dried sludge and frit in a furnace for a preset period of time, (2) section the cooled beaker along its diameter, and (3) measure the average glass height across the sectioned face using a ruler. As illustrated in Figure 1-1, the glass height is measured for each of the 16 horizontal segments up to the red lines where relatively large-sized bubbles begin to appear. The linear melt rate (LMR) is determined as the average of all 16 glass height readings divided by the time during which the sample was kept in the furnace. This 'visual' method has proved useful in identifying melting accelerants such as alkalis and sulfate and further ranking the relative melt rates of candidate frits for a given sludge batch. However, one of the inherent technical difficulties of this method is to determine the glass height in the presence of numerous gas bubbles of varying sizes, which is prevalent especially for the higher-waste-loading glasses. That is, how the red lines are drawn in Figure 1-1 can be subjective and, therefore, may influence the resulting melt rates significantly. For example, if the red lines are drawn too low, a significant amount of glassy material interspersed among the gas bubbles will be excluded, thus underestimating the melt rate. Likewise, if they are drawn too high, many large voids will be counted as glass, thus overestimating the melt rate. As will be shown later in this report, there is also no guarantee that a given distribution of glass and gas bubbles along a particular sectioned plane will always be representative of the entire sample volume. Poor reproducibility seen in some LMR data may be related to these difficulties of the visual method. In addition, further improvement of the existing melt rate model requires that the overall impact of feed chemistry on melt rate be reflected on measured data at a greater quantitative resolution on a more consistent basis than the visual method can provide. An alternate method being pursued is X-ray computed tomography (CT). It involves X-ray scanning of glass samples, performing CT on the 2-D X-ray images to build 3-D volumetric data, and adaptive segmentation analysis of CT results to not only identify but quantify the distinct regions within each sample based on material density and morphologies. The main advantage of this new method is that it can determine the relative local density of the material remaining in the beaker after the heat treatment regardless of its morphological conditions by selectively excluding all the voids greater than a given volumetric pixel (voxel) size, thus eliminating much of the subjectivity involved in the visual method. As a result, the melt rate data obtained from CT scan will give quantitative descriptions not only on the fully-melted glass, but partially-melted and unmelted feed materials. Therefore, the CT data are presumed to be more reflective of the actual melt rate trends in continuously-fed melters than the visual data. In order to test the applicability of X-ray CT scan to the HLW glass melt rate study, several new series of HLW simulant/frit mixtures were melted in the Melt Rate Furnace (MRF) and the contents of each cooled but un-sectioned beaker were CT scanned and analyzed. For comparison purposes, a cross-sectional X-ray image of each sample was used to estimate the melt rate using the visual method. In order to see the impact of feed chemistry on melt rate more clearly, a total of ten frit-only glasses (i.e., no waste) were also made, CT scanned and analyzed. In addition, two historical glass series which were previously sectioned were re-joined and CT scanned; the results were then compared to the visual data obtained earlier. All the work performed on these historical samples will be documented separately in another report. This report describes the methodologies used to interpret and apply the results of X-ray CT scans to the HLW melt rate study and further highlights some of the key results on the compositional dependence of melt rate and the cross-comparison of the visual and CT results.

36 MATERIALS SCIENCE↗

HIGH ALUMINUM HLW (HIGH LEVEL WASTE ) GLASSES FOR HANFORDS WTP (WASTE TREATMENT PROJECT)

This paper presents the results of glass formulation development and melter testing to identify high waste loading glasses to treat high-Al high level waste (HLW) at Hanford. Previous glass formulations developed for this HLW had high waste loadings but their processing rates were lower that desired. The present work was aimed at improving the glass processing rate while maintaining high waste loadings. Glass formulations were designed, prepared at crucible-scale and characterized to determine their properties relevant to processing and product quality. Glass formulations that met these requirements were screened for melt rates using small-scale tests. The small-scale melt rate screening included vertical gradient furnace (VGF) and direct feed consumption (DFC) melter tests. Based on the results of these tests, modified glass formulations were developed and selected for larger scale melter tests to determine their processing rate. Melter tests were conducted on the DuraMelter 100 (DMIOO) with a melt surface area of 0.11 m{sup 2} and the DuraMelter 1200 (DMI200) HLW Pilot Melter with a melt surface area of 1.2 m{sup 2}. The newly developed glass formulations had waste loadings as high as 50 wt%, with corresponding Al{sub 2}O{sub 3} concentration in the glass of 26.63 wt%. The new glass formulations showed glass production rates as high as 1900 kg/(m{sup 2}.day) under nominal melter operating conditions. The demonstrated glass production rates are much higher than the current requirement of 800 kg/(m{sup 2}.day) and anticipated future enhanced Hanford Tank Waste Treatment and Immobilization Plant (WTP) requirement of 1000 kg/(m{sup 2}.day).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of glass-batch makeup on the melting process

The response of a glass batch to heating is determined by the batch makeup and in turn determines the rate of melting. Batches formulated for a high-alumina nuclear waste to be vitrified in an all-electric melter were heated at a constant temperature-increase rate to determine changes in melting behavior in response to the selection of batch chemicals and silica grain-size as well as the addition of heat-generating reactants. The type of batch materials and the size of silica grains determine how much, if any, primary foam occurs during melting. Small quartz grains, 5-μm in size, caused extensive foaming because their major portion dissolved at temperatures <800°C, contributing to the formation of viscous glass-forming melt that trapped evolving batch gases. Primary foam did not occur in batches with larger quartz grains, ±75 μm in size, because their major portion dissolved at temperatures >800°C when batch gases no longer evolved. The exothermal reaction of nitrates with sucrose was ignited at a temperature as low as 160°C and caused a temporary jump in temperature of several hundred degrees. Secondary foam, the source of which is oxygen from redox reactions, occurred in all batches of a limited composition variation involving five oxides, B 2 O 3 , CaO, Li 2 O, MgO, and Na 2 O. The foam volume at the maximum volume-increase rate was a weak function of temperature and melt basicity. Neither the batch makeup nor the change in glass composition had a significant impact on the dissolution of silica grains. The impacts of primary foam generation on glass homogeneity and the rate of melting in large-scale continuous furnaces have yet to be established via mathematical modeling and melter experiments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

PRESSURE AND TEMPERATURE DEPENDENT DEFLAGRATION RATE MEASUREMENTS OF LLM-105 AND TATB BASED EXPLOSIVES

The pressure dependent deflagration rates of LLM-105 and TATB based formulations were measured in the LLNL high pressure strand burner. The role of binder amount, explosive type, and thermal damage and their effects on the deflagration rate will be discussed. Two different formulations of LLM-105 and three formulations of TATB were studied and results indicate that binder amount and type play a minor role in the deflagration behavior. This is in sharp contrast to the HMX based formulations which strongly depend on binder amount and type. The effect of preheating these samples was considerably more dramatic. In the case of LLM-105, preheating the sample appears to have little effect on the deflagration rate. In contrast, preheating TATB formulations causes the deflagration rate to accelerate and become erratic. The thermal and mechanical properties of these formulations will be discussed in the context of their pressure and temperature dependent deflagration rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predictive beyond-mean-field rate equations for multisite lattice–gas models of catalytic surface reactions: CO oxidation on Pd(100)

Tailored multisite lattice–gas (msLG) models are developed for CO oxidation on Pd(100) at low-pressures. These models include multiple adsorption site types and superlattice adlayer ordering due to short-range exclusion for highly mobile reactant adspecies. However, they are simplified to neglect longer-range weaker adspecies interactions, so that the key energetic parameters are the CO desorption barrier and the reaction barrier. We discuss existing density functional theory results for these energies and present additional analysis for CO adsorption. After also including an appropriate nontrivial specification of the dynamics of adsorption onto mixed reactant adlayers, we develop rate equations for the reaction kinetics. Our formulation goes beyond traditional mean-field (MF) Langmuirian treatments by accounting for multiple adsorption sites and for the strong spatial correlations associated with superlattice ordering. Specifically, we utilize factorization approximations based on appropriate site motifs, and also Padé resummation of exact low-coverage expansions for sticking coefficients. Our beyond-MF rate equations are successful in accurately predicting key aspects of reactive steady-state behavior, and thus expand the utility of rate equation formulations in surface chemistry. This is confirmed by comparison with precise kinetic Monte Carlo simulation results. Furthermore, we not only assess bistability and criticality observed for CO oxidation but also find more complex multistability associated with symmetry-breaking transitions in high-coverage CO adlayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Glass Formulation for Next Generation Melters

This report describes glass formulation work performed at the Vitreous State Laboratory (VSL) to support the development and testing of next generation advanced joule-heated ceramic melters (NG AJHCMs). The principal objective was to develop and test new glass formulations to take advantage of the enhanced processing capabilities of the NG AJHCMs. New glass formulations were designed to maximize waste loadings while meeting all processing and product quality requirements. The increase in waste loadings, together with the improvements afforded by the NG AJHCMs, will potentially reduce the glass volumes while increasing the throughput rates. Newly developed glass formulations will be needed in melter testing to demonstrate the feasibility of NG AJHCM technologies. This work builds on previous work performed at VSL to increase waste loading and processing rates for Hanford high-iron and high-chromium high level waste (HLW) streams.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fluctuating hydrodynamics of multi-species reactive mixtures

We formulate and study computationally the fluctuating compressible Navier-Stokes equations for reactive multi-species fluid mixtures. We contrast two different expressions for the covariance of the stochastic chemical production rate in the Langevin formulation of stochastic chemistry, and compare both of them to predictions of the chemical master equation for homogeneous well-mixed systems close to and far from thermodynamic equilibrium. We develop a numerical scheme for inhomogeneous reactive flows, based on our previous methods for non-reactive mixtures [Balakrishnan , Phys. Rev. E 89, 013017 (2014)]. We study the suppression of non-equilibrium long-ranged correlations of concentration fluctuations by chemical reactions, as well as the enhancement of pattern formation by spontaneous fluctuations. Good agreement with available theory demonstrates that the formulation is robust and a useful tool in the study of fluctuations in reactive multi-species fluids. At the same time, several problems with Langevin formulations of stochastic chemistry are identified, suggesting that future work should examine combining Langevin and master equation descriptions of hydrodynamic and chemical fluctuations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MPAS-Seaice (v1.0.0): sea-ice dynamics on unstructured Voronoi meshes

Abstract. We present MPAS-Seaice, a sea-ice model which uses the Model for Prediction Across Scales (MPAS) framework and spherical centroidal Voronoi tessellation (SCVT) unstructured meshes. As well as SCVT meshes, MPAS-Seaice can run on the traditional quadrilateral grids used by sea-ice models such as CICE. The MPAS-Seaice velocity solver uses the elastic–viscous–plastic (EVP) rheology and the variational discretization of the internal stress divergence operator used by CICE, but adapted for the polygonal cells of MPAS meshes, or alternatively an integral (“finite-volume”) formulation of the stress divergence operator. An incremental remapping advection scheme is used for mass and tracer transport. We validate these formulations with idealized test cases, both planar and on the sphere. The variational scheme displays lower errors than the finite-volume formulation for the strain rate operator but higher errors for the stress divergence operator. The variational stress divergence operator displays increased errors around the pentagonal cells of a quasi-uniform mesh, which is ameliorated with an alternate formulation for the operator. MPAS-Seaice shares the sophisticated column physics and biogeochemistry of CICE and when used with quadrilateral meshes can reproduce the results of CICE. We have used global simulations with realistic forcing to validate MPAS-Seaice against similar simulations with CICE and against observations. We find very similar results compared to CICE, with differences explained by minor differences in implementation such as with interpolation between the primary and dual meshes at coastlines. We have assessed the computational performance of the model, which, because it is unstructured, runs with 70 % of the throughput of CICE for a comparison quadrilateral simulation. The SCVT meshes used by MPAS-Seaice allow removal of equatorial model cells and flexibility in domain decomposition, improving model performance. MPAS-Seaice is the current sea-ice component of the Energy Exascale Earth System Model (E3SM).

58 GEOSCIENCES↗

Can quantum transition state theory be defined as an exact t = 0 + limit?

Here, the definition of the classical transition state theory (TST) as a t → 0 + limit of the flux-side time correlation function relies on the assumption that simultaneous measurement of population and flux is a well defined physical process. However, the noncommutativity of the two measurements in quantum mechanics makes the extension of such a concept to the quantum regime impossible. For this reason, quantum TST (QTST) has been generally accepted as any kind of quantum rate theory reproducing the TST in the classical limit, and there has been a broad consensus that no unique QTST retaining all the properties of TST can be defined. Contrary to this widely held view, Hele and Althorpe (HA) recently suggested that a true QTST can be defined as the exact t → 0 + limit of a certain kind of quantum flux-side time correlation function and that it is equivalent to the ring polymer molecular dynamics (RPMD) TST. This work seeks to question and clarify certain assumptions underlying these suggestions and their implications. First, the time correlation function used by HA as a starting expression is not related to the kinetic rate constant by virtue of linear response theory, which is the first important step in relating a t = 0 + limit to a physically measurable rate. Second, a theoretical analysis calls into question a key step in HA’s proof which appears not to rely on an exact quantum mechanical identity. The correction of this makes the true t = 0 + limit of HA’s QTST different from the RPMD-TST rate expression, but rather equal to the well-known path integral quantum transition state theory rate expression for the case of centroid dividing surface. An alternative quantum rate expression is then formulated starting from the linear response theory and by applying a recently developed formalism of real time dynamics of imaginary time path integrals. In conclusion, it is shown that the t → 0 + limit of the new rate expression vanishes in the exact quantum limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗