Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reduced graphene oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Production of graphene-derivatives using organic molecules for supercapacitors and beyond

Graphene is rapidly expanding for applications ranging from nanoelectronics to space exploration. A material with such enormous potential requires a variety of synthesis methods. Here, we report a library of relatively sustainable redox-active organic molecules for the reduction of graphene oxide (GO) namely N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD), 7,7,8,8-tetracyanoquinodimethane (TCNQ), ferrocene (Ferro), and decamethylferrocene (DFerro). Among them, the reduction of GO using TMPD starts even with simple hand-shaking for just a few minutes. By controlling the sonication time under ambient conditions, one can control the electronic properties of the reduced graphene oxide (rGO). The resulting free-standing films delivered a capacitance of 185 F/g when tested them as supercapacitor electrodes. We also demonstrated that TMPD can exfoliate graphite into few-layer graphene sheets with simple sonication. Here, we further show that under mild heating, these molecules can serve as dopants during the reduction process to produce nitrogen-doped graphene. Our results may guide researchers to explore sustainable organic molecules for the large-scale production of graphene-based materials for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomically Precise Single Metal Oxide Cluster Catalyst with Oxygen–Controlled Activity

Single cluster catalysts (SCCs) consisting of atomically precise metal nanoclusters dispersed on supports represent a new frontier of heterogeneous catalysis. However, the ability to synthesize SCCs with high loading and to precisely introduce non-metal atoms to further tune their catalytic activity and reaction scope of SCCs have been longstanding challenges. In this work, a new interface confinement strategy is developed for the synthesis of a high density of atomically precise Ru oxide nanoclusters (Ru 3 O 2 ) on reduced graphene oxide (rGO), attributed to the suppression of diffusion-induced metal cluster aggregation. Ru 3 O 2 /rGO exhibits a significantly enhanced activity for oxidative dehydrogenation of 1,2,3,4-tetrahydroquinoline (THQ) to quinoline with a high yield (≈86%) and selectivity (≈99%), superior to Ru and RuO 2 nanoparticles, and homogeneous single/multiple-site Ru catalysts. In addition, Ru 3 O 2 /rGO is also capable of efficiently catalyzing more complex oxidative reactions involving three reactants. The theoretical calculations reveal that the presence of two oxygen atoms in the Ru 3 O 2 motif not only leads to a weak hydrogen bonding interaction between the THQ reactant and the active site, but also dramatically depletes the density of states near the Fermi level, which is attributed to the increased positive valence state of Ru and the enhanced oxidative activity of the Ru 3 O 2 cluster for hydrogen abstraction.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Elucidating the Role of Single-Atom Pd for Electrocatalytic Hydrodechlorination

In this study, we loaded Pd catalysts onto a reduced graphene oxide (rGO) support in an atomically dispersed fashion [i.e., Pd single-atom catalysts (SACs) on rGO or Pd 1 /rGO] via a facile and scalable synthesis based on anchor-site and photoreduction techniques. The as-synthesized Pd 1 /rGO significantly outperformed the Pd nanoparticle (Pdnano) counterparts in the electrocatalytic hydrodechlorination of chlorinated phenols. Downsizing Pd nano to Pd 1 leads to a substantially higher Pd atomic efficiency (14 times that of Pdnano), remarkably reducing the cost for practical applications. The unique single-atom architecture of Pd 1 additionally affects the desorption energy of the intermediate, suppressing the catalyst poisoning by Cl – , which is a prevalent challenge with Pdnano. Characterization and experimental results demonstrate that the superior performance of Pd 1 /rGO originates from (1) enhanced interfacial electron transfer through Pd–O bonds due to the electronic metal–support interaction and (2) increased atomic H (H*) utilization efficiency by inhibiting H 2 evolution on Pd 1 . Furthermore, this work presents an important example of how the unique geometric and electronic structure of SACs can tune their catalytic performance toward beneficial use in environmental remediation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Nanoscale Ternary Amide‐rGO Composite with Boosted Kinetics for Reversible H 2 Storage

Abstract Metal amides are attractive candidates for hydrogen storage due to their high volumetric and gravimetric hydrogen densities. However, the sluggish kinetics and competing side reactions during hydrogen uptake and release limit their practical use. Here, a novel nanoconfined Li 2 Mg(NH) 2 @reduced graphene oxide (rGO) composite is presented, which is fabricated using a melt‐infiltration method with a minimum weight penalty of only 2 wt.%. The presence of rGO ensures close contact between the active phases, effectively preventing aggregation during cycling process. As a result, the reversible capacity of Li 2 Mg(NH) 2 @rGO reaches 4.42 wt.%, with no capacity degradation observed after multiple cycling. Theoretical calculations show that rGO catalyzes the hydrogen bond cleavage at the Mg‐amide/Li hydride interface, leading to local dehydrogenation hotspots and significantly improves kinetics of dehydrogenation compared to the bulk counterpart. This study provides a promising strategy for designing metal imide‐based composites to overcome the kinetic limitations and improve their reversible hydrogen storage performance.

08 HYDROGEN↗
DOE OSTI2023

Rapid, Sensitive, Label-Free Electrical Detection of SARS-CoV-2 in Nasal Swab Samples

Rapid diagnosis of coronavirus disease 2019 (COVID-19) is key for the long-term control of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) amid renewed threats of mutated SARS-CoV-2 around the world. Here, we report on an electrical label-free detection of SARS-CoV-2 in nasopharyngeal swab samples directly collected from outpatients or in saliva-relevant conditions by using a remote floating-gate field-effect transistor (RFGFET) with a 2-dimensional reduced graphene oxide (rGO) sensing membrane. RFGFET sensors demonstrate rapid detection (<5 min), a 90.6% accuracy from 8 nasal swab samples measured by 4 different devices for each sample, and a coefficient of variation (CV) < 6%. Also, RFGFET sensors display a limit of detection (LOD) of pseudo-SARS-CoV-2 that is 10 000-fold lower than enzyme-linked immunosorbent assays, with a comparable LOD to that of reverse transcriptionpolymerase chain reaction (RT-PCR) for patient samples. To achieve this, comprehensive systematic studies were performed regarding interactions between SARS-CoV-2 and spike proteins, neutralizing antibodies, and angiotensin-converting enzyme 2, as either a biomarker (detection target) or a sensing probe (receptor) functionalized on the rGO sensing membrane. Finally, taken together, this work may have an immense effect on positioning FET bioelectronics for rapid SARS-CoV-2 diagnostics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

A Mesopore-Confined and Graphene Oxide-Localized Ruthenium Catalyst Increases Rates of Mid-Chain Polyolefin Hydrogenolysis

A catalyst architecture with mesoporous silica coating Ru nanoparticles on reduced graphene oxide (mSiO 2 /Ru/rGO) localizes the 2 nm Ru solely at the closed bottoms of 2.9 nm diameter mesopores. mSiO 2 /Ru/rGO catalyzes the rapid, selective hydrogenolysis of polyolefins at wax formation rates (ν wax ) up to 1700 g wax ·g Ru –1 ·h –1 and a turnover frequency (TOF) for C–C bond cleavage of 130 ± 8 min –1 . The ν wax and TOF for mSiO 2 /Ru/rGO are 23× and 16× those of nonporous Ru/rGO, respectively, indicating that faster chain cleavage is also more selective inside mesopores. The methane yield from mSiO 2 /Ru/rGO is ca. 30% of the value obtained from Ru/rGO. Methane decreases, and wax selectivity improves with narrow-pore (2.3 nm) mSiO 2 /Ru/rGO. The reaction rate decreases at lower and higher H 2 pressures from its maximum at 37 bar. Log(TOF)-log(P H2 ) plots reveal rates ∝ [P H2 ] 2.8 or [P H2 ] −2.0 in the lower or higher pressure ranges, respectively. Corresponding plots for Ru/C give rates ∝ [P H2 ] 1 or [P H2 ] −2.4 . Ru is hydrocarbon-covered at low pressure; thus, the higher H 2 order for mSiO 2 /Ru/rGO indicates that mesopores increase the density of cleavable unsaturated moieties on the Ru surface. The lower H 2 order on Ru/C implies a lower density of cleavable groups because saturated segments occupy a larger fraction of the Ru surface. Higher surface occupancy by the hydrocarbon reactant correlates with more methane formation. Therefore, pore confinement, narrower pore diameter in mSiO 2 /Ru/rGO, or higher H 2 pressure leads to lower methane yields. Ru nanoparticles in mSiO 2 /Ru/rGO maintain equivalent activity and selectivity over five recycling tests.

Catalysts↗
DOE OSTI2021

Synergy of Graphene Nanoribbons and Graphene Sheets for High-Rate Lithium-Sulfur Batteries

According to the increasing demands for shortening the battery charging time, high current rate (C-rate) performances become more significant in practical applications. With a higher theoretical capacity, lithium-sulfur batteries are treated as promising candidates for the next-generation batteries. In this work, the utilization of graphene nanoribbons (GNRs) exhibits the benefits in conductivity and other electrochemical performances, especially for high-rate applications. With air-controlled electrospray as the method, carbon encapsulated sulfur particles, poly(acrylic acid), reduced graphene oxide (rGO) sheets, and GNRs are mixed and directly deposited onto the carbon coated aluminum collector, to employ as the cathode. The scanning electron microscopy (SEM) imaging exhibits that the two-dimensional structure of GNRs helps construct inter-connected networks. This improved structure of cathode can increase the electroconductivity, confirmed by the electrochemical impedance spectroscopy (EIS), and modify the porosity, indicated through pore size distribution profiles. In this way, the polysulfides can be more efficiently trapped and utilized, realizing the promising behavior with faster charge transfer. In terms of the cycling performance at 0.2 C, the batteries with GNRs can perform 18% higher in capacity than those without GNRs, without decreasing the charge retention. According to the rate-capability tests, systems with GNRs can achieve enhanced performance compared to batteries with precursor carbon nanotubes (CNTs), especially at high C-rates. At 2 C, with 80 wt % of graphene-based materials as GNRs, batteries can achieve an increase in capacity by 78% and 41% compared with systems without GNRs and those with CNTs, respectively. Accordingly, the results testify the synergy of GNRs and rGO sheets in Li-S batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

A hybrid CoOOH-rGO/Fe 2 O 3 photoanode with spatial charge separation and charge transfer for efficient photoelectrochemical water oxidation

As a promising photoanode for photoelectrochemical (PEC) water oxidation, hematite (Fe 2 O 3 ) still suffers from poor charge mobility and serious charges recombination and sluggish surface oxygen evolution kinetics. Herein, a hybrid photoanode of cobalt (oxy)hydroxide coupled with reduced graphene oxide modified Fe 2 O 3 (CoOOH-rGO/Fe 2 O 3 ) is well crafted by a facile hydrothermal synthesis with a chelation-mediated in-situ growth method. Morphology characterizations indicate rGO forms the internal network among isolated Fe 2 O 3 and CoOOH nanosheets distribute on the terminal of Fe 2 O 3 , forming a spatial separated nanostructure. The resultant CoOOH-rGO/Fe 2 O 3 exhibits an obviously reduced onset potential of ca. 150 mV and a significantly enhanced photocurrent density of 2.56 mA cm -2 at 1.23 V, which is ca. 3.3 times higher than that of bare Fe 2 O 3 . Especially, the functions of rGO and CoOOH are studied by using electrochemical impedance spectroscopy, open circuit potentials and intensity modulated photocurrent spectroscopy. It is found rGO act as conductive network which facilitates the electron transfer from Fe 2 O 3 to the substrate, while CoOOH evidently passivate the surface states of Fe 2 O 3 , improve charge separation and provide catalytic active sites for water oxidation. Additionally, the spatial charge separation and charge transfer caused by CoOOH and rGO are responsible for the enhanced PEC performance of water oxidation. The rational design and the facile fabrication strategy exhibit great potential to be used for other PEC system with great efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Living Filter Designs for In-Line Recovery and Sorting of Critical materials

This project explored “bio-mining” of critical materials from electronic waste (E-waste) streams by developing living filters arrays capable of recovering these materials, focusing on the platinum group metals (PGMs) and rare earth elements (REEs). While highly toxic, E-waste is considered a valuable “urban mine” as it contains critical materials such as PGMs and REEs with orders of magnitude higher purity than the richest ores. The aim of the project was to: (1) develop mechanically robust, silk-based biomaterial filtration membranes that can capture REEs from dilute aqueous waste; (2) design and build 3D bioprinted living filters containing encapsulated electrochemically active bacteria (EAB) capable of bio-reducing PGMs and recovering them from waste streams; and (3) constructing combined living filter arrays using both components to efficiently capture REE and PGM from the same waste stream. The developed silk-based filtration membranes were self-assembled using silk-nanofibrils (SNFs) derived from silkworm (Bombyx mori) cocoons in conjunction with recombinant silk-elastin-like proteins (SELPs), which contained lanthanide-binding peptide tags (LBTs) with a high affinity and specificity towards REEs. These 100% biodegradable protein-based membranes were capable of recovering up to 85% of model REE ions (Tb 3+ ) filtered through the membrane, with ~50% recovery achieved in the presence of high concentrations (100X) of common interfering metals (Ca 2+ , Cu 2+ , Fe 3+ , Zn 2+ ). REE captured by the membranes were easily recovered by applying a low pH desorption buffer. The membranes also demonstrated substantial reusability, with only a 30% loss in binding capacity after 4 cycles of REE binding and recovery. To recover the PGMs, we created a bottom-up assembling strategy to construct a living hydrogel composed of a seamlessly integrated living catalyst, Shewanella loihica PV-4 (PV-4), for metal reduction, and their structural and functional linkers, bio-reduced graphene oxide (B-rGO). This hydrogel demonstrated a close to 90% recovery of model metal ions, Pd, from a simulated e-waste leaching stream with minimum-to-no biomass production. It’s also worth noting that the Pd recovery is initiated immediately after the introduction of living hydrogel, compared to conventional biocarriers that required start-up times within hours to days. Overall, these living hydrogels demonstrated superior bioactivity, structural integrity, and agility over existing biocarriers, which offers extensive opportunities to advance the biological metal recovery with unparallel efficiency, reduced energy/material consumption, and minimal environmental impact.

36 MATERIALS SCIENCE↗
DOE OSTI2022

More Powerful Twistron Carbon Nanotube Yarn Mechanical Energy Harvesters

We report that stretching a coiled carbon nanotube (CNT) yarn can provide large, reversible electrochemical capacitance changes, which convert mechanical energy to electricity. Here, it is shown that the performance of these “twistron” harvesters can be increased by optimizing the alignment of precursor CNT forests, plastically stretching the precursor twisted yarn, applying much higher tensile loads during precoiling twist than for coiling, using electrothermal pulse annealing under tension, and incorporating reduced graphene oxide nanoplates. The peak output power for a 1 and a 30 Hz sinusoidal deformation are 0.73 and 3.19 kW kg -1 , respectively, which are 24- and 13-fold that of previous twistron harvesters at these respective frequencies. This performance at 30 Hz is over 12-fold that of other prior-art mechanical energy harvesters for frequencies between 0.1 and 600 Hz. The maximum energy conversion efficiency is 7.2-fold that for previous twistrons. Twistron anode and cathode yarn arrays are stretched 180° out-of-phase by locating them in the negative and positive compressibility directions of hinged wine-rack frames, thereby doubling the output voltage and reducing the input mechanical energy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxygen-Based Anion Redox for Lithium Batteries

The importance of current Li-ion batteries (LIBs) in modern society cannot be overstated. While the energy demands of devices increase, the corresponding enhancements in energy density of battery technologies are highly sought after. Currently, many different battery concepts, such as Li-S and metal-air among many others, have been investigated. However, their practical implementation has mostly been restricted to the prototyping stage. In fact, most of these technologies require rework of existing Li-ion battery manufacturing facilities and will naturally incur resistance to change from industry. For this reason, one specifically attractive technology, anionic redox in transition metal oxides, has gained much attention in the recent years. Its ability to be directly used in already established processes and higher energy density with similar electrolyte formulation make it a key materials research direction for next generation Li-ion batteries. In regular LIBs, the redox active centers are the transition metal cation. In anion redox, both the anion (typically O) and the transition metal cation are utilized as redox centers with enormous implications for increasing energy density. This new material can be highly competitive for replacing the current LIB technologies. However, much is still unknown about its cyding mechanism. Upon activating the O redox couples, most cationic and anionic redox active materials will either evolve O 2 or undergo irreversible structural degradation with associated severe decreases in electrochemical performance. By understanding the transition from full anion redox to partial cationic and anionic redo; we hope readers can gain a deeper understanding of the topic. This Account will focus mainly on the work that was conducted by our group at Argonne National Laboratory. Herein, the phenomenon of cationic and anionic redox in a lithium-ion battery cathode will first be discussed. Our work in resonant inelastic X-ray scattering to investigate the spectroscopic features of O after delithiation has found potential "fingerprint" signals that could likely be used to identify and confirm reversible O redox if corroborated with other techniques. To follow, we will examine our work on Li-O 2 batteries. While our group and the research community have had many significant contributions and improvements to the field of Li-O 2 (such as decreasing overpotential and achieving cyclability in air environment), its practical application is still far from realization. Perhaps our most important contribution to this area is the discovery that Ir deposited on reduced graphene oxide can be used to halt the reduction of O 2 at the LiO 2 oxidation state. This not only significantly decreases the charge overpotential but also presents the important concept of oxidation-state controlled discharge. Subsequently, we will focus on our oxidation state-controlled redox-based charging of oxygen in a pure oxygen redox Li-ion battery. Future implications of this technology will be emphasized.

25 ENERGY STORAGE↗
DOE OSTI2021

Uranium In Situ Electrolytic Deposition with a Reusable Functional Graphene-Foam Electrode

Nuclear fission produces 400 GWe which represents 11% of the global electricity output. Uranium is the essential element as both fission fuel and radioactive waste. Therefore, the recovery of uranium is of great importance. In this study, an in situ electrolytic deposition method to extract uranium from aqueous solution is reported. A functionalized reduced graphene oxide foam (3D-FrGOF) is used as the working electrode, which acts as both a hydrogen evolution reaction catalyst and a uranium deposition substrate. The specific electrolytic deposition capacity for U(VI) ions with the 3D-FrGOF is 4560 mg g –1 without reaching saturation, and the Coulombic efficiency can reach 54%. Moreover, reduction of the uranium concentration in spiked seawater from 3 ppm to 19.9 ppb is achieved, which is lower than the US Environmental Protection Agency uranium limits for drinking water (30 ppb). Furthermore, the collection electrode can be efficiently regenerated and recycled at least nine times without much efficiency fading, by ejecting into 2000 ppm concentrated uranium solution in a second bath with reverse voltage bias. All these findings open new opportunities in using free-standing 3D-FrGOF electrode as an advanced separation technique for water treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2020

4D Printing of Stretchable Supercapacitors via Hybrid Composite Materials

Stretchable supercapacitors (SCs) have attracted significant attention in developing power-independent stretchable electronic systems due to their intrinsic energy storage function and unique mechanical properties. Most current SCs are generally limited by their low stretchability, complicated fabrication process, and insufficient performance and robustness. This study presents a facile method to fabricate arbitrary-shaped stretchable electrodes via 4D printing of conductive composite from reduced graphene oxide, carbon nanotube, and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate. The electrode patterns of an arbitrary shape can be deposited onto prestretched substrates by aerosol-jet printing, then self-organized origami (ridge) patterns are generated after releasing the substrates from holding stretchers due to the mismatched strains. The stretchable electrodes demonstrate superior mechanical robustness and stretchability without sacrificing its outstanding electrochemical performance. The symmetric SC prototype possesses a gravimetric capacitance of ≈21.7 F g -1 at a current density of 0.5 A g -1 and a capacitance retention of ≈85.8% from 0.5 to 5 A g -1 . A SC array with arbitrary-shaped electrodes is also fabricated and connected in series to power light-emitting diode patterns for large-scale applications. Finally, the proposed method paves avenues for scalable manufacturing of future energy-storage devices with controlled extensibility and high electrochemical performance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Single‐Site Carbon‐Supported Metal‐Oxo Complexes in Heterogeneous Catalysis: Structure, Reactivity, and Mechanism

Abstract When early transition metal complexes are molecularly grafted onto catalyst supports, well‐defined, surface‐bound species are created, which are highly active and selective single‐site heterogeneous catalysts (SSHCs) for diverse chemical transformations. In this minireview, we analyze and summarize a less conventional type of SSHC in which molybdenum dioxo species are grafted onto unusual carbon‐unsaturated scaffolds, such as activated carbon, reduced graphene oxide, and carbon nanohorns. The choice of earth‐abundant, low‐toxicity, versatile metal constituents, and various carbon supports illustrates “catalyst by design” principles and yields insights into new catalytic systems of both academic and technological interest. Here, we summarize experimental and computational investigations of the bonding, electronic structure, reaction scope, and mechanistic pathways of these unusual catalysts.

Liu, Yiqi↗
DOE OSTI2023

Single-Site Carbon-Supported Metal-Oxo Complexes in Heterogeneous Catalysis: Structure, Reactivity, and Mechanism

When early transition metal complexes are molecularly grafted onto catalyst supports, well-defined, surface-bound species are created, which are highly active and selective single-site heterogeneous catalysts (SSHCs) for diverse chemical transformations. Further, in this minireview, we analyze and summarize a less conventional type of SSHC in which molybdenum dioxo species are grafted onto unusual carbon-unsaturated scaffolds, such as activated carbon, reduced graphene oxide, and carbon nanohorns. The choice of earth-abundant, low-toxicity, versatile metal constituents, and various carbon supports illustrates “catalyst by design” principles and yields insights into new catalytic systems of both academic and technological interest. Here, we summarize experimental and computational investigations of the bonding, electronic structure, reaction scope, and mechanistic pathways of these unusual catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Lithium Storage Mechanisms and Electrochemical Behavior of a Molybdenum Disulfide Nanoparticle Anode

This study investigates the electrochemical behavior of molybdenum disulfide (MoS 2 ) as an anode in Li-ion batteries, focusing on the extra capacity phenomenon. Employing advanced characterization methods such as in situ and ex situ X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy, the research unravels the complex structural and chemical evolution of MoS 2 throughout its cycling. A key discovery is the identification of a unique Li intercalation mechanism in MoS 2 , leading to the formation of reversible Li x MoS 2 phases that contribute to the extra capacity of the MoS 2 electrode. Density function theory calculations suggest the potential for overlithiation in MoS 2 , predicting Li 5 MoS 2 as the most energetically favorable phase within the lithiation–delithiation process. Additionally, the formation of a Li-rich phase on the surface of Li 4 MoS 2 is considered energetically advantageous. After the first discharge, the battery system engages in two main reactions. One involves operation as a Li-sulfur battery within the carbonate electrolyte, and the other is the reversible intercalation and deintercalation of Li in Li x MoS 2 . The latter reaction contributes to the extra capacity of the battery. The incorporation of reduced graphene oxide as a conductive additive in MoS 2 electrodes notably improves their rate capability and cycling stability.

Lithium Rich Phase↗
DOE OSTI2022

Bio‐Based Piezo‐ and Thermoresistive Photocurable Sensing Materials from Acrylated Epoxidized Soybean Oil

Abstract Bio‐based photocurable polymers are increasingly in demand as environmentally friendly materials for advanced applications. Together with functional fillers, these represent a next step for the generation of functional and active smart materials, compatible with additive manufacturing technologies. Herein, acrylated epoxidized soybean oil (AESO) mixed with different amounts of reduced graphene oxide (rGO) up to 6 wt% in order to obtain UV‐curable piezoresistive and thermoresistive materials, is reported. It is shown that the addition of rGO to AESO hinders the curing process, but always maintains double bond conversions higher than 50%. Composites are characterized by a good dispersion of micrometric filler clusters. Further, the thermal stabilities are close to 300 °C and crosslinking degrees are above 1.75 mmol cm –3 . The Young modulus of the composites decreases with the addition of the rGO fillers, in particular for the higher filler contents, and electrical conductivities up to 0.13 S m –1 are obtained for the composites with the highest rGO content. UV‐curable composites with piezoresistive and thermoresistive responses suitable for applications are thus obtained, characterized by gauge factors around 26 for deformations up to 2% and maximum thermoresistive sensitivity of S = 0.43, values similar to the values obtained for petroleum‐based materials.

Mendes‐Felipe, Cristian↗