Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reductive Dynamic and Static Excited State Quenching of a Homoleptic Ruthenium Complex Bearing Aldehyde Groups

A new homoleptic Ru polypyridyl complex bearing two aldehyde groups on each bipyridine ligand, [Ru(dab) 3 ](PF 6 ) 2 , where dab is 4,4′-dicarbaldehyde-2,2′-bipyridine, was synthesized, characterized, and utilized for iodide photo-oxidation studies. In acetonitrile (CH 3 CN) solution, the complex displayed an intense metal-to-ligand charge transfer (MLCT) absorbance maximum at 475 nm (ε = 22,000 M –1 cm –1 ) and an infrared (IR) band at 1712 cm –1 assigned to the pendent aldehyde groups. Visible light excitation in air-saturated solution resulted in room temperature photoluminescence (PL) with a maximum at 675 nm, a quantum yield, ϕ PL = 0.048, and an excited state lifetime, τ ο = 440 ns, from which radiative and nonradiative relaxation rate constants were extracted, k r = 9.1 × 10 4 s –1 and knr = 1.8 × 10 6 s –1 . Pulsed visible light excitation yielded transient UV–vis and IR absorption spectra consistent with an MLCT excited state; relaxation occurred with the maintenance of two isosbestic points in the visible region, and a lifetime that agreed with that measured by time-resolved PL. Cyclic voltammetry studies in a CH 3 CN solution with 0.1 M TBAPF 6 electrolyte revealed a quasi-reversible oxidation, E°(Ru III/II ) = +1.25 V vs. Fc +/0 , and three sequential one-electron reductions at −1.10, −1.25, and −1.54 V vs. Fc +/0 . Here, an excited state reduction potential of E°(Ru *2+/+ ) = +0.89 V vs. Fc +/0 was estimated with the Rehm–Weller expression. Titration of tetrabutylammonium iodide, TBAI, into a CD 3 CN solution of [Ru(dab) 3 ](PF 6 ) 2 resulted in significant shifts in the aldehyde H atom and 3,3′-biypridyl resonances that were analyzed with a 1:1 equilibrium model, from which K eq = 460 M –1 was extracted, increasing to 5800 M –1 when the solvent was changed to acetone-d 6 . Iodide titrations resulted in a significant quenching of the [Ru(dab) 3 ] *2+ lifetime and quantum yield in both CH 3 CN and acetone solvents. In CH 3 CN, the quenching was mainly dynamic and well described by the Stern–Volmer model, from which a quenching rate constant, k q , of 4.5 × 10 10 M –1 s –1 and an equilibrium constant, K eq , of 8.3 × 10 3 M –1 were obtained. In acetone, the static quenching pathway by iodide was greatly enhanced, with a K eq of 1.2 × 10 4 M –1 and a higher k q of 9.2 × 10 10 M –1 s –1 .

Aldehydes↗
DOE OSTI2025

Assessing the Long-Term Stability of Anion Exchange Membranes for Electrochemical CO 2 Reduction

Materials and cell components used in CO 2 electrolysis have largely been adapted from technologies initially developed for water electrolysis and fuel cells. However, electrochemical CO 2 reduction introduces distinct material challenges due to the unique chemical environment in this process. Here, in this study, we conducted ex-situ 1000 h stability tests on commonly used anion exchange membranes, exposing them exclusively to electrolytes and organic molecules used or produced during CO 2 electrolysis, at concentrations relevant to and compatible with postseparation processes. Notably, 15% w/w n-propanol and 5 M acetic acid caused complete dissolution or partial disintegration of the membranes unless cross-linking was present and remained stable throughout the test. When the membranes stayed physically intact, most of them exhibited excellent chemical stability in alkaline medium containing alcohols or formic acid, which was confirmed by vibrational spectroscopy and ion exchange capacity measurements. However, exposure to alcohol-and acid-containing solutions led to a substantial increase in swelling and water uptake, with potential implications for mechanical stability, ion/product crossover, and compression management of adjacent components. The potential effects of CO 2 electroreduction products on membrane stability, their subsequent impact on electrolyzer performance, and mitigation strategies are discussed.

CO2RR↗
DOE OSTI2022

Photocatalytic Aqueous CO 2 Reduction to CO and CH 4 Sensitized by Ullazine Supramolecular Polymers

There has been rapid progress on the chemistry of supramolecular scaffolds that harness sunlight for aqueous photocatalytic production of hydrogen. However, great efforts are still needed to develop similar photosynthetic systems for the great challenge of CO 2 reduction especially if they avoid the use of nonabundant metals. This work investigates the synthesis of supramolecular polymers capable of sensitizing catalysts that require more negative potentials than proton reduction. The monomers are chromophore amphiphiles based on a diareno-fused ullazine core that undergo supramolecular polymerization in water to create entangled nanoscale fibers. Under 450 nm visible light these fibers sensitize a dinuclear cobalt catalyst for CO 2 photoreduction to generate carbon monoxide and methane using a sacrificial electron donor. The supramolecular photocatalytic system can generate amounts of CH 4 comparable to those obtained with a precious metal-based [Ru(phen) 3 ](PF 6 ) 2 sensitizer and, in contrast to Ru-based catalysts, retains photocatalytic activity in all aqueous media over 6 days. Furthermore, the present study demonstrates the potential of tailored supramolecular polymers as renewable energy and sustainability materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Core–Shell Covalently Linked Graphitic Carbon Nitride–Melamine–Resorcinol–Formaldehyde Microsphere Polymers for Efficient Photocatalytic CO 2 Reduction to Methanol

Photocatalytic reduction of CO 2 with light and H 2 O to form CH 3 OH is a promising route to mitigate carbon emissions and climate changes. Although semiconducting metal oxides are potential photocatalysts for this reaction, low photon efficiency and leaching of environmental unfriendly, toxic metals limit their applicability. Here, we report a metal-free, core-shell photocatalysts consisting of graphitic carbon nitride (g-C 3 N 4 , CN) covalently linked to melamine-resorcinol-formaldehyde (MRF) microsphere polymers for this reaction. Cova-lent linkage enabled efficient separation of photo-generated carriers and photocatalysis. Using 100 mg of a photocatalyst containing 15 wt.% CN, a CH 3 OH yield of 0.99 μmol·h -1 was achieved at a reaction temperature of 80 °C and 0.5 MPa with external quantum efficiencies ranging from 5.5% at 380 nm to 1.7% at 550 nm. The yield was about 20 and 10 times higher than that of its components CN and MRF, respectively. Characterization with XPS, TEM, and bulk and surface elemental analyses supported a core-shell structure and charge transfer at C-N bond at the CN-MRF interface between the methoxy group in the 2,4-trishydroxylmethyl-1,3-diphenol part of MRF and the terminal amino groups in the CN. This enhanced ligand-to-ligand charge transfer resulted in 67% of photo-excited internal charge transferred from CN to hy-droxymethylamino group in MRF, whose amino group was the catalytic site for CO 2 photocatalytic reduction to CH 3 OH. Furthermore, this study provides a series of new metal-free photocatalyst designs and insights into the molecular-level structure-mediated photocatalytic response

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Conservation Voltage Reduction (CVR) via Two-Timescale Control in Unbalanced Power Distribution Systems

Voltage control devices are employed in power distribution systems to reduce the power consumption by operating the system closer to the lower acceptable voltage limits; this technique is called conservation voltage reduction (CVR). The different modes of operation for system’s legacy devices (with binary control) and new devices (e.g. smart inverters with continuous control) coupled with variable photovoltaic (PV) generation results in voltage fluctuations which makes it challenging to achieve CVR objective. This paper presents a two-timescale control of feeder’s voltage control devices to achieve CVR that includes (1)a centralized controller operating in a slower time-scale to coordinate voltage control devices across the feeder and (2) local controllers operating in a faster timescale to mitigate voltage fluctuations due to PV variability. The centralized controller utilizes a three-phase optimal power flow model to obtain the decision variables for both legacy devices and smart inverters. The local controllers operate smart inverters to minimize voltage fluctuations and restore nodal voltages to their reference values by adjusting the reactive power support. The proposed approach is validated using the IEEE-123 bus (medium-size) and R3-12.47-2 (large-size) feeders. It is demonstrated that the proposed approach is effective in achieving the CVR objective for unbalanced distribution systems.

optimal control, distributed generation, fluctuati↗
DOE OSTI2021

Next-Cycle Optimal Fuel Control for Cycle-to-Cycle Variability Reduction in EGR-Diluted Combustion

In this simulation study, cycle-to-cycle fuel control was used to reduce CCV by injecting additional fuel in operating conditions with sporadic misfires and partial burns. An optimal control policy was proposed that utilizes 1) a physics-based model that tracks in-cylinder gas composition and 2) a one-step-ahead prediction of the combustion efficiency based on a kernel density estimator. The optimal solution, however, presents a tradeoff between the reduction in combustion CCV and the increase in fuel injection quantity required to stabilize the charge. Such a tradeoff can be ad- just by a single parameter embedded in the cost function.

Maldonado, BryanP. [Oak Ridge National Lab. (ORNL)↗
DOE OSTI2020

Cost Reduction of School Bus Fleet Electrification With Optimized Charging and Distributed Energy Resources: Preprint

Considerations for electrifying school buses are presented with an analysis of battery sizing to match bus driving requirements. The charging and vehicle-to-building dispatch of the electric school buses were optimized to evaluate the potential to reduce the impact of the bus charging on the school's electric utility bill. Distributed energy resources (DER) and flexible building loads were also considered with the school bus electrification to evaluate the further reduction in energy costs with enhanced system integration and optimized dispatch. The effect of degradation on the school bus batteries was analyzed to determine if the smart charging and vehicle-to-building battery operation decreases the life of the battery. The results show that there is an opportunity to mitigate the increase of electric utility bills with improved charging controls and bi-directionally operating the school bus batteries to reduce building demand charges. The battery degradation analysis using dispatch with optimized charging and discharging shows acceptable battery life.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Effect of Ammonia on the Electrocatalysis of Oxygen Reduction Reaction in Base

We investigated the effect of ammonia on the activity of seven benchmark oxygen reduction reaction (ORR) electrocatalysts, Pt/C, Pd/C, Au/C, Ag/C, commercial Fe–N–C, zeolitic imidazolate framework (ZIF)-based Fe–N–C (Fe-ZIF), and ZIF-based Fe,Co–N–C (Fe,Co-ZIF) in alkaline media and direct ammonia fuel cell (DAFC) relevant conditions using a rotating disk electrode. We found that ammonia exposure causes considerable ORR activity loss for all studied electrocatalysts. Should we rank the electrocatalysts in terms of their ORR activity loss and their irreversible ORR activity loss as the result of exposure to ammonia (from the highest loss to the lowest loss), we get Au/C > Pt/C ≈ Pd/C > Ag/C » commercial Fe–N–C > Fe-ZIF ≈ Fe,Co-ZIF and Pd/C > Au/C > Ag/C > commercial Fe–N–C > Fe-ZIF ≈ Fe,Co-ZIF > Pt/C, respectively. The ammonia oxidation reaction activity and adsorptive properties of the Gerisher-Mauerer reaction intermediates do not govern the trend of the ORR activity loss of Pt/C, Pd/C, Au/C, and Ag/C electrocatalysts. Notably, we found that Pt/C electrocatalyst shows the lowest irreversible ORR activity loss, while Fe-ZIF and Fe,Co-ZIF electrocatalysts show the lowest overall ORR activity loss. Our comprehensive study suggests that Pt-based, Fe-ZIF, and Fe,Co-ZIF electrocatalysts are promising cathode candidates for future DAFCs.

Abbasi, Reza (ORCID:0000000249384151)↗
NASA NTRS1992

The FAST Hipparcos data reduction consortium - Overview of the reduction software

The main features of the data analysis methods adopted by FAST in the calibration and processing of the Hipparcos data are discussed. The structure of the data reduction software is examined, and the actual processing and evaluation are presented. Attention is given to the first look task, the calibration task, data preparation, attitude determination, the great circle reduction, synthesis treatment, iterations, data management and command software, and follow-up and evaluation activities.

Kovalevsky, J.↗
DOE OSTI2021

Enhancing Oxygen Reduction Activity and Cr Tolerance of Solid Oxide Fuel Cell Cathodes by a Multiphase Catalyst Coating

Intermediate temperature solid oxide fuel cells (IT-SOFCs) are cost-effective and efficient energy conversion systems. Here, the sluggish oxygen reduction reaction (ORR) and the degradation of cathodes are critical challenges to the commercialization of IT-SOFCs. Here, a highly efficient multiphase (MP) catalyst coating, consisting of Ba 1–x Co 0.7 Fe 0.2 Nb 0.1 O 3–δ (BCFN) and BaCO 3 , to enhance the ORR activity and durability of the state-of-the-art lanthanum strontium cobalt ferrite (La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3–δ , LSCF) cathode is reported. The conformal MP catalyst-coated LSCF cathode shows a polarization resistance (R p ) of 0.048 Ω cm 2 at 650 °C, about one order of magnitude smaller than that of the bare LSCF. In an accelerated Cr-poisoning test, the degradation rate of the catalyst-coated LSCF electrode is 10 –3 Ω cm 2 h –1 (0.59% h –1 ) over 200 h, only one fifth of the degradation rate of the bare LSCF electrode at 750 °C. In addition, anode-supported single cells with the MP catalyst-coated LSCF cathode show a dramatically enhanced peak power density (1.4 W cm –2 vs 0.67 W cm –2 at 750 °C) and increased durability against Cr and H 2 O. Both experimental results and density functional theory-based calculations indicate that the BCFN phase improves the ORR activity while the BaCO 3 phase enhances the stability of the LSCF cathode.

solid oxide fuel cells↗