Techniques for improved convergence in neighboring optimum guidance.
Neighboring optimum feedback guidance to motivate min-distance lookup parameter determined by minimizing metric function of perturbed state and reference trajectory
Powers, W. F.↗
SEARCH · Search NASA
Results for “Reference state”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Techniques for improved convergence in neighboring optimum guidance
Neighboring optimum feedback guidance to motivate min-distance lookup parameter determined by minimizing metric function of perturbed state and reference trajectory
Powers, W. F.↗
Control logic to track the outputs of a command generator or randomly forced target
A procedure is presented for synthesizing time-invariant control logic to cause the outputs of a linear plant to track the outputs of an unforced (or randomly forced) linear dynamic system. The control logic uses feed-forward of the reference system state variables and feedback of the plant state variables. The feed-forward gains are obtained from the solution of a linear algebraic matrix equation of the Liapunov type. The feedback gains are the usual regulator gains, determined to stabilize (or augment the stability of) the plant, possibly including integral control. The method is applied here to the design of control logic for a second-order servomechanism to follow a linearly increasing (ramp) signal, an unstable third-order system with two controls to track two separate ramp signals, and a sixth-order system with two controls to track a constant signal and an exponentially decreasing signal (aircraft landing-flare or glide-slope-capture with constant velocity).
Trankle, T. L.↗
Temperature dependence of the reaction NO + NO3 - 2NO2
The flash photolysis-visible absorption technique has been used to measure rate constants for the reaction NO + NO3 2NO2 over the temperature range 224-328 K. The temperature dependence of the rate constant is given by the expression K1(T) = (1.59 + or - 0.32) x 10 to the -11th exp(122/T)cu cm/molecule/s where the stated uncertainties refer to the + or - sigma limits from both random and systematic errors.
Sander, S. P.↗
North American plate dynamics
Deformation within the North American plate in response to various tectonic processes is modeled using an elastic finite element analysis. The tectonic processes considered in the modeling include ridge forces associated with the normal thermal evolution of oceanic lithosphere, shear and normal stresses transmitted across transforms, normal stresses transmitted across convergent boundaries, stresses due to horizontal density contrasts within the continent, and shear tractions applied along the base of the plate. Model stresses are calculated with respect to a lithostatic reference stress state. Shear stresses transmitted across transform boundaries along the San Andreas and Caribbean are small, of the order of 5-10 MPa. Also, compressive stresses of the order of 5-10 MPa transmitted across the major transforms improve the fit to the data. Compressive stresses across convergent margins along the Aleutians and the Middle America trench are important.
Richardson, Randall M.↗
A demonstration of unified TDRS/GPS tracking and orbit determination
We describe results from an experiment in which TDRS and GPS satellites were tracked simultaneously from a small (3 station) ground network in the western United States. We refer to this technique as 'GPS-like tracking' (GLT) since the user satellite - in this case TDRS - is essentially treated as a participant in the GPS constellation. In the experiment, the TDRS K(sub space-to-ground link (SGL) was tracked together with GPS L-band signals in enhanced geodetic-quality GPS receivers (TurboRogue). The enhanced receivers simultaneously measured and recorded both the TDRS SGL and the GPS carrier phases with sub-mm precision, enabling subsequent precise TDRS orbit determination with differential GPS techniques. A small number of calibrated ranging points from routine operations at the TDRS ground station (White Sands, NM) were used to supplement the GLT measurements in order to improve determination of the TDRS longitude. Various tests performed on TDRS ephemerides derived from data collected during this demonstration - including comparisons with the operational precise orbit generated by NASA Goddard Space Flight Center - provide evidence that the TDRS orbits have been determined to better than 25 m with the GLT technique.
Haines, B.↗
Letter to the Editor on Robert Yaes's Letter
In his letter on page 13 of the March 1993 issue, Robert Yaes raised the question of whether the existence of the cosmic microwave background (CMB), now observed so precisely with COBE, is compatible with the principle of relativity: The laws by which the states of physical systems undergo change are not affected, whether these changes of state be referred to the one or other of two systems of coordinates in uniform translatory motion. Although I do not claim to provide an xpertresponse to this question, as desired by Yaes, it is my understanding that the principle of relativity is not necessarily violated by the mere existence of a universal reference frame. The laws of physics can still be invariant under some transformation of coordinates. This transformation is not specified by the principle of relativity itself, although we have discovered so far that Nature respects Lorentz invariance (principle of the constancy of the velocity of light).
Krisher, T. P.↗
Ground Contact Modeling for the Morpheus Test Vehicle Simulation
The Morpheus vertical test vehicle is an autonomous robotic lander being developed at Johnson Space Center (JSC) to test hazard detection technology. Because the initial ground contact simulation model was not very realistic, it was decided to improve the model without making it too computationally expensive. The first development cycle added capability to define vehicle attachment points (AP) and to keep track of their states in the lander reference frame (LFRAME). These states are used with a spring damper model to compute an AP contact force. The lateral force is then overwritten, if necessary, by the Coulomb static or kinetic friction force. The second development cycle added capability to use the PolySurface class as the contact surface. The class can load CAD data in STL (Stereo Lithography) format, and use the data to compute line of sight (LOS) intercepts. A polygon frame (PFRAME) is computed from the facet intercept normal and used to convert the AP state to PFRAME. Three flat plane tests validate the transitions from kinetic to static, static to kinetic, and vertical impact. The hazardous terrain test will be used to test for visual reasonableness. The improved model is numerically inexpensive, robust, and produces results that are reasonable.
Cordova, Luis↗
Ground Contact Modeling for the Morpheus Test Vehicle Simulation
The Morpheus vertical test vehicle is an autonomous robotic lander being developed at Johnson Space Center (JSC) to test hazard detection technology. Because the initial ground contact simulation model was not very realistic, it was decided to improve the model without making it too computationally expensive. The first development cycle added capability to define vehicle attachment points (AP) and to keep track of their states in the lander reference frame (LFRAME). These states are used with a spring damper model to compute an AP contact force. The lateral force is then overwritten, if necessary, by the Coulomb static or kinetic friction force. The second development cycle added capability to use the PolySurface class as the contact surface. The class can load CAD data in STL (Stereo Lithography) format, and use the data to compute line of sight (LOS) intercepts. A polygon frame (PFRAME) is computed from the facet intercept normal and used to convert the AP state to PFRAME. Three flat plane tests validate the transitions from kinetic to static, static to kinetic, and vertical impact. The hazardous terrain test will be used to test for visual reasonableness. The improved model is numerically inexpensive, robust, and produces results that are reasonable.
Cordova, Luis↗
Terrestrial Sources of X-Ray Radiation and Their Effects on NASA Flight Hardware
X-rays are an energetic and penetrating form of ionizing electromagnetic radiation, which can degrade NASA flight hardware. The main concern posed by such radiation is degradation of active electronic devices and, in some cases, diodes. Non-electronic components are only damaged at doses that far exceed the point where any electronic device would be destroyed. For the purposes of this document, flight hardware can be taken to mean an entire instrument, the flight electronics within the instrument or the individual microelectronic devices in the flight electronics. This document will discuss and describe the ways in which NASA flight hardware might be exposed to x-rays, what is and isn't a concern, and how to tell the difference. First, we must understand what components in flight hardware may be vulnerable to degradation or failure as a result of being exposed to ionizing radiation, such as x-rays. As stated above, bulk materials (structural metals, plastics, etc.) are generally only affected by ionizing radiation at very high dose levels. Likewise, passive electronic components (e.g. resistors, capacitors, most diodes) are strongly resistant to exposure to x-rays, except at very high doses. The main concerns arise when active components, that is, components like discrete transistors and microelectronic devices, are exposed to ionizing radiation. Active components are designed to respond to minute changes in currents and voltages in the circuit. As such, it is not surprising that exposure to ionizing radiation, which creates ionized and therefore electrically active particles, may degrade the way the hardware performs. For the most part, the mechanism for this degradation is trapping of the charges generated by ionizing radiation by defects in dielectric materials in the hardware. As such, the degree of damage is a function of both the quantity of ionizing radiation exposure and the physical characteristics of the hardware itself. The metric that describes the level of exposure to ionizing radiation is total ionizing dose (TID). The unit of TID is the rad, which is defined as 100 ergs absorbed per gram of material. Dose can be expressed in other units, for example grays (gy), where 1 gy = 100 rads. The actual fluence of radiation needed to deliver a rad depends on the absorbing material, so units of dose are usually stated in reference to the material of interest. That is, for microelectronic devices, the unit of dose is generally rad (Si) or rad (SiO2). However, the definition of absorbed dose in this fashion has the advantage that the type of radiation causing the ionization can be normalized so that a realistic and adequate comparison can be made. The sensitivity of microelectronic parts to TID varies over many orders of magnitude. (Note: Doses to humans are typically expressed in rems-or roentgen-equivalent-man-which measures tissue damage, and depends on the type of radiation, as well as the dose in rads.) Thus far, the "softest" parts tested at NASA showed damage at 500 rads (Si), while parts that are radiation-hardened by design can remain functional to doses on the order of 107 rads (Si). This broad range of sensitivity highlights one of the most important considerations when considering the effects of radiation on electronic parts: In order to determine whether a radiation exposure is a concern for a particular part, one must understand the technologies used in the part and their vulnerabilities to TID damage. A NASA radiation expert should be consulted to obtain such information.
X-ray↗
Hyperspectral Sounder Spectral Fingerprinting: Using Machine Learning Techniques to Enhance Model-Based Physical Inversion
Different retrieval algorithms have been developed to process top-of-atmosphere (TOA) spectral radiance data provided by hyperspectral infrared sounder missions. Those algorithms are either optimal estimation method (OEM) based schemes with radiative transfer calculation involved in the retrieval process, or machine learning based methods that allow ultra-efficient data procession but lack of radiometric consistency validation based on the directly measured information. Combining both approaches leverages their respective technical advantages, leading to more accurate results. This study introduces a hyperspectral sounder fingerprinting algorithm to explore this hybrid approach. This approach involves the use of a spectral information-based classification method to identify an reference geophysical state and the corresponding radiative kernel. This enables the efficient retrieval of geophysical variables of interest through a radiative kernel-based linear inversion procedure. The fingerprinting method has been applied to analyze a decade-long hyperspectral sounder data record.
Wan Wu↗
Parameter adjustment in state-space structure of model-reference adaptive control for a stochastic system
Gain determination from dynamic /on line/ solutions to Riccati equation for model reference adaptive control applicable to multiple input/ output or stochastic systems
Currie, M. G.↗
Current state of the mass storage system reference model
IEEE SSSWG was chartered in May 1990 to abstract the hardware and software components of existing and emerging storage systems and to define the software interfaces between these components. The immediate goal is the decomposition of a storage system into interoperable functional modules which vendors can offer as separate commercial products. The ultimate goal is to develop interoperable standards which define the software interfaces, and in the distributed case, the associated protocols to each of the architectural modules in the model. The topics are presented in viewgraph form and include the following: IEEE SSSWG organization; IEEE SSSWG subcommittees & chairs; IEEE standards activity board; layered view of the reference model; layered access to storage services; IEEE SSSWG emphasis; and features for MSSRM version 5.
Coyne, Robert↗
Ratemeter
An instantaneous reading tachometer in which reoccurring events to be measured in rate, trigger a threestate timing generator in which the first two states are of fixed duration and the third state is of variable duration is described. An electrical decay circuit is set to a reference level by the second state and the third state causes this reference level to decay until the reoccurrence of an event. This triggers a new first state which in turn triggers a sample and hold circuit to hold the decayed level. The decayed level is amplified and provided as an output indicative of the instantaneous rate of occurence of the last two successive events.
Currie, J. R.↗
Energy management of three-dimensional minimum-time intercept
A real-time computer algorithm to control and optimize aircraft flight profiles is described and applied to a three-dimensional minimum-time intercept mission. The proposed scheme has roots in two well known techniques: singular perturbations and neighboring-optimal guidance. Use of singular-perturbation ideas is made in terms of the assumed trajectory-family structure. A heading/energy family of prestored point-mass-model state-Euler solutions is used as the baseline in this scheme. The next step is to generate a near-optimal guidance law that will transfer the aircraft to the vicinity of this reference family. The control commands fed to the autopilot (bank angle and load factor) consist of the reference controls plus correction terms which are linear combinations of the altitude and path-angle deviations from reference values, weighted by a set of precalculated gains. In this respect the proposed scheme resembles neighboring-optimal guidance. However, in contrast to the neighboring-optimal guidance scheme, the reference control and state variables as well as the feedback gains are stored as functions of energy and heading in the present approach. Some numerical results comparing open-loop optimal and approximate feedback solutions are presented.
Kelley, H. J.↗
Investigation of Direct Force Control For Aerocapture at Neptune
In this work, a direct force control numerical predictor-corrector guidance architecture is developed to enable Neptune aerocapture using blunt body aeroshells. A linear aerodynamics model is formulated for a Mars Science Laboratory-derived aeroshell. The application of optimal control theory shows that the∆V-minimizing angle of attack and side-slip angle control laws are bang-bang. A closed-loop numerical predictor-corrector direct force control guidance algorithm is developed and numerically simulated using the Program to Optimize Simulated Trajectories II. A series of Monte Carlo simulations are conducted to assess the guidance robustness to uncertainties in vehicle aerodynamics,atmospheric density, and entry state. For the reference set of uncertainties, the direct force control vehicle achieves 99.7% successful science orbit insertion within a 330 m/s total∆V budget for periapsis raise, apoapsis, inclination,and ascending node corrections. Improved atmospheric knowledge and delivery state accuracy are shown to improve the success to 100% and reduce the∆V to 230 m/s. Direct force control is demonstrated to be an enabling technology for blunt body aerocapture at Neptune while providing comparable performance to existing slender body vehicles studied in literature
aerocapture↗
Data Automata in Scala
The field of runtime verification has during the last decade seen a multitude of systems for monitoring event sequences (traces) emitted by a running system. The objective is to ensure correctness of a system by checking its execution traces against formal specifications representing requirements. A special challenge is data parameterized events, where monitors have to keep track of the combination of control states as well as data constraints, relating events and the data they carry across time points. This poses a challenge wrt. efficiency of monitors, as well as expressiveness of logics. Data automata is a form of automata where states are parameterized with data, supporting monitoring of data parameterized events. We describe the full details of a very simple API in the Scala programming language, an internal DSL (Domain-Specific Language), implementing data automata. The small implementation suggests a design pattern. Data automata allow transition conditions to refer to other states than the source state, and allow target states of transitions to be inlined, offering a temporal logic flavored notation. An embedding of a logic in a high-level language like Scala in addition allows monitors to be programmed using all of Scala's language constructs, offering the full flexibility of a programming language. The framework is demonstrated on an XML processing scenario previously addressed in related work.
runtime verification↗
Self-consistent Quantum Iteratively Sparsified Hamiltonian Algorithm (SQuISH)
Due to coherence time limitations, reducing the resources required to run quantum algorithms and simulate physical systems on a quantum computer is crucial. With regards to Hamiltonian simulation, a significant effort has focused on building efficient algorithms using various factorizations and truncations, typically derived from the Hamiltonian alone. We introduce a new paradigm for improving Hamiltonian simulation and reducing the cost of ground state problems based on ideas recently developed for classical chemistry simulations. The key idea is that one can find efficient ways to reduce resources needed by quantum algorithms by making use of two key pieces of information: the Hamiltonian operator and an approximate ground state wavefunction. We refer to our algorithm as the self-consistent quantum iteratively sparsified Hamiltonian (SQuISH). By performing our scheme iteratively, one can drive SQuISH to create an accurate wavefunction using a truncated, resource-efficient Hamiltonian. By utilizing this more compact Hamiltonian, our algorithm provides an approach to reduce the gate complexity of ground state calculations on quantum hardware. As proof of principle, we implement SQuISH using configuration interaction for small molecules and coupled cluster for larger systems. Through our combination of approaches, we demonstrate how it performs on a range of systems, the largest of which would require more than 200 qubits to run on quantum hardware.
Diana Chamaki↗