Search NASA⌕ Search

SEARCH · Search NASA

Results for “Repeat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Spatial resolution and repeatability of Magsat crustal anomaly data over the Indian Ocean

Preliminary results from analysis of individual Magsat tracks in the eastern Indian Ocean demonstrate the resolution capability and repeatability of these data. Spectrum analysis indicates that 250 km is the absolute lower limit for resolving crustal magnetic anomalies in Magsat along-track data. Spectral coherence analysis of closely-spaced tracks shows that magnetic anomaly features with wavelengths greater than 700 km are highly repeatable from track to track.

Sailor, R. V.↗
NASA NTRS1982

Packet communication system for a multi-beam beam switched satellite repeater

This paper presents the design of a packet-switched communication system using a multi-beam, beam switched satellite repeater. The protocol provides a combination of random access via Slotted ALOHA techniques and demand assigned access using collision requests. This allows efficient bandwidth usage and low average delays. Minimization of earth station cost was a major objective. This was achieved by transferring the bulk of the system complexity to the satellite repeater and the (ground) network controller. This centrally controlled protocol would allow greater system stability and would permit system reconfiguration in response to changes in traffic intensity. Sufficient signalling is also incorporated to allow both rate diversity to combat fading and timing corrections to account for satellite drift.

Bose, S. K.↗
NASA NTRS1983

Positional repeatability measurements of stepper motors at cryogenic temperatures

For cryogenically-cooled infrared instruments and telescopes employed in space, reliable and predictable motor operations at 4 K in vacuum are in most cases necessary. For the Shuttle Infrared Telescope Facility (SIRTF), stepper motors may be employed in a number of applications. A test facility was designed and built for measuring stepper motor positional repeatability, in vacuum, over a temperature range from ambient to liquid helium temperature. Tests regarding positional repeatability were conducted at different motor speeds, directions of motor rotation, step sizes, and power conditions. In addition, tests were performed with respect to the ability of the motor to remain in a position with no power applied to the motor.

Pompea, S. M.↗
NASA NTRS1985

Repeatable electrical measurement instrumentation for use in the accelerated stress testing of thin film solar cells

Attention is given to the construction, calibration, and performance of a repeatable measurement system for use in conjunction with the accelerated stress testing of a-Si:H cells. A filtered diode array is utilized to approximate the spectral response of any type of solar cell in discrete portions of the spectrum. It is noted that in order to achieve the necessary degree of overall repeatability, it is necessary to pay particular attention to methods of contacting and positioning the cells.

Davis, C. W.↗
NASA NTRS1988

Topex orbit determination and gravity recovery using GPS data from repeat orbits

A covariance analysis is presented for a differential GPS-based technique for satellite tracking and gravity recovery to be demonstrated on Topex in the early 1990's. The technique employs data from an ensemble of repeat ground tracks to recover a unique satellite epoch state for each track and a set of invariant local gravity parameters common to all tracks. For satellites above about 800 km altitude, where gravity modeling is the dominant systematic error, averaging of random error over many arcs and adjustment of the gravity model reduces the final satellite position error. The local gravity parameters can then be used to produce a refined global gravity model. The analysis indicates that errors ranging from 5 to 8 cm in Topex altitude and 0.05 to 0.2 mgal for the gravity field can be achieved, depending on the number of repeat arcs used.

Wu, Jiun-Tsong↗
NASA NTRS1988

The strength of laminated composite materials under repeated impact loading

When low velocity and energy impact is exerted on a laminated composite material, in a perpendicular direction to the plane of the laminate, invisible damage may develop. It is shown analytically and experimentally that the invisible damage occurs during the first stage of contact between the impactor and the laminate and is a result of the contact stresses. However, the residual flexural strength changes only slightly, because it depends mainly on the outer layers, and these remain undamaged. Repeated impact intensifies the damage inside the laminate and causes larger bending under equivalent impact load. Finally, when the damage is most severe, even though it is still invisible, the laminate fails because of bending on the tension side. If the repeated impact is halted before final fracture occurs the residual strength and modulus would decrease by a certain amount.

Rotem, Assa↗
NASA NTRS1989

Eigenvector derivatives of repeated eigenvalues using singular value decomposition

An explicit formula is obtained for the first-order eigenvector derivative that corresponds to the eigenvector of a repeated eigenvalue, in the case of the nonself-adjoint eigenvalue problem. This method applies to the class of nondefective problems whose first eigenvalue derivatives of the repeated eigenvalues are distinct. A singular-value decomposition approach is used to compute four requisite bases for eigenspaces, as well as to keep track of the dimensions of state variables and the conditioning of the state equations.

Lim, Kyong B.↗
NASA NTRS1990

The inclusion of higher degree and order gravity terms in the design of a repeat ground track orbit

Mean Orbit Elements can be chosen such that a desired ground track repeat criteria is obtained when propagating with the secular effects of a central body gravity field. If the proper initial conditions are chosen that correspond to these Mean Elements, the orbit can also be propagated with the full gravity field and form another ground track repeat pattern. Further, if the effects of other perturbative forces are compensated for, such that the ground track remains near this pattern, the central body effects can again be considered repetitive. The process of arriving at these conclusions, along with the supporting numerical simulations, are presented.

Vincent, Mark A.↗
NASA NTRS1991

Eigenvalue and eigenvector sensitivity and approximate analysis for repeated eigenvalue problems

A set of computationally efficient equations for eigenvalue and eigenvector sensitivity analysis are derived, and a method for eigenvalue and eigenvector approximate analysis in the presence of repeated eigenvalues is presented. The method developed for approximate analysis involves a reparamaterization of the multivariable structural eigenvalue problem in terms of a single positive-valued parameter. The resulting equations yield first-order approximations of changes in both the eigenvalues and eigenvectors associated with the repeated eigenvalue problem. Examples are given to demonstrate the application of such equations for sensitivity and approximate analysis.

Hou, Gene J. W.↗
NASA NTRS1992

TOPEX orbit determination and gravity recovery using Global Positioning System data from repeat orbits

A covariance analysis is presented for satellite tracking and gravity recovery with a differential Global Positioning System-based technique to be demonstrated on TOPEX in the early 1990s. The technique employs data from an ensemble of repeat ground tracks to recover a unique satellite epoch state for each track and a set of invariant positional parameters common to all tracks. The positional parameters represent the effect of mismodeled gravitational field on the satellite orbit. At an altitude of 1336 km, where gravity modeling is the dominant systematic error, averaging of random error over many arcs and adjustment of the gravity model reduce the final satellite position error. The positional parameters can then be used to produce a refined global gravity model. The analysis indicates that errors ranging from 5 to 8 cm in TOPEX altitude and 0.05 to 0.2 mGal for the gravity field can be achieved, depending on the number of repeat arcs used.

Wu, Jiun-Tsong↗
NASA NTRS1945

Statistical Analysis of the Characteristics of Repeated Gusts in Turbulent Air

Statistical methods were applied to acceleration and airspeed data obtained with the XC-35 airplane during flights in turbulent air within convective clouds in order to determine the characteristics of repeated or closely spaced gusts pertinent to design problems. Results indicated that, in turbulent air within convective cloud, gusts tend to be contiguous and are seldom found isolated in space. Over-all average spacing between repeated gusts was in good agreement with twice the average gust-gradient distance of 10 chords used in present design.

AUTHORS (2)↗
NASA NTRS1994

Distributed parameter modeling of repeated truss structures

A new approach to find homogeneous models for beam-like repeated flexible structures is proposed which conceptually involves two steps. The first step involves the approximation of 3-D non-homogeneous model by a 1-D periodic beam model. The structure is modeled as a 3-D non-homogeneous continuum. The displacement field is approximated by Taylor series expansion. Then, the cross sectional mass and stiffness matrices are obtained by energy equivalence using their additive properties. Due to the repeated nature of the flexible bodies, the mass, and stiffness matrices are also periodic. This procedure is systematic and requires less dynamics detail. The first step involves the homogenization from a 1-D periodic beam model to a 1-D homogeneous beam model. The periodic beam model is homogenized into an equivalent homogeneous beam model using the additive property of compliance along the generic axis. The major departure from previous approaches in literature is using compliance instead of stiffness in homogenization. An obvious justification is that the stiffness is additive at each cross section but not along the generic axis. The homogenized model preserves many properties of the original periodic model.

Wang, Han-Ching↗
NASA NTRS1996

Repeat Pass Aircraft Interferometry Results at Portage Lake, Maine and Innisfail, Australia

The NASA/JPL AIRSAR/TOPSAR instruments have the capability of collecting fully polarimetric radar data at three wavelengths (C, L, and P-bands) and dual antenna interferometry at C-band, and more recently, L-band. In order to understand frequency and baseline dependent scattering effects in vegetated regions, repeat pass interferometry data was collected for two vegetated regions in 1993. Portage Lake, Maine is a primarily coniferous forested region with some clear cutting from logging activities in the region. The second site at Innisfail, Australia borders a tropical rain forest and is situated adjacent to some major clear cut regions and banana plantations. Preliminary analysis of repeat pass data collected in these areas shows that the smaller the wavelength the greater the temporal decorrelation between passes, the longer the wavelength the greater the penetration depth for some types of vegetation canopy, yet for some vegetation canopy types, in particular for a banana plantation, there appears to be no frequency dependent penetration into the canopy.

Hensley, Scott↗
NASA NTRS1994

The rarity of soft gamma-ray repeaters deduced from reactivation of SGR1806-20

Only two different types of gamma-ray transient sources are presently known: over one thousand Gamma-Ray Bursters (GRBs) and only three Soft Gamma-Ray repeaters (SGRs). The latter are distinguished by their propensity for recurrent burst behaviour, in contrast to the nonrepeating GRB sources. Recurrent emission from one of the repeaters, SGR1900 + 14, has been detected earlier by the Burst and Transient Source Experiment (BATSE) aboard the Compton Gamma-Ray Observatory. Here we report renewed burst activity from SGR1806 - 20, the most prolific of the three known SGRs. This detection of reactivation of this source has been rapidly followed by identification of an X-ray counterpart, which also coincides with a compact radio source now identified as a plerionic (pulsar-powered) supernova remnant. In combination, these results are leading to a convergence of ideas about the nature of SGRs, which can now be firmly identified as neutron stars. That BATSE has detected no new sources in its two and a half years of operation indicates that SGRs are rare in our Galaxy.

Kouveliotou, C.↗
NASA NTRS1996

Repeat Pass Aircraft Interferometry Results at Portage Lake, Maine and Innisfail, Australia

The NASA/JPL AIRSAR/TOPSAR instruments have the capability of collecting fully polarimetric radar data at three wavelengths (C, L and P-Bands) and dual antenna interferometry at C-Band, and more recently L-Band. In order to understand frequency and baseline dependent scattering effects in vegetated regions repeat pass interferometry data was collected for two vegetated regions in 1993. Portage Lake, Maine is a primarily coniferous forested region with some clear cutting from logging activities in the region. The second site at Innisfail, Australia borders a tropical rain forest and is situated adjacent to some major clear cut regions and banana plantations. Preliminary analysis of repeat pass data collected in these areas shows that the smaller the wavelength the greater the temporal decorrelation between passes, the longer the wavelength the greater the penetration depth for some types of vegetation canopy, yet for some vegetation canopy types, in particular for a banana plantation there appears to be no frequency dependent penetration into the canopy.

Hensley, Scott↗
NASA NTRS1961

Repeatability, Drift, and Aftereffect of Three Types of Aircraft Altimeters

In a series of laboratory tests of a number of sensitive altimeters 5 (Air Force type C-12 and C-13) and of precision altimeters (Air Force 8 type MA-1), the repeatability was determined for the full range of each type of instrument the drift characteristics were determined during 1-hour periods at various altitudes, and the drift and aftereffect were measured for a variety of simulated flights representative of some civil and military operations. For comparable altitude ranges, the repeatability errors of the C-12 and C-13 types were generally of the same order while those of the MA-1 type were somewhat smaller. The drift and aftereffect of the C-12 instruments were smaller than those of the C-13 instruments, and the drift and aftereffect of the MA-1 altimeters were considerably smaller than those of both types of the sensitive instruments. The drift of each of the three types of altimeters was found to increase with altitude and the drift of the precision type was found to increase with increasing rate of altitude change preceding the drift test.

Gracey, William↗
NASA NTRS2002

Large Torque Variations in Two Soft Gamma Repeaters

We have monitored the pulse frequencies of the two soft gamma repeaters SGR 1806-20 and SGR 1900+14 through the beginning of year 2001 using primarily Rossi X-Ray Timing Explorer Proportional Counter Array observations. In both sources, we observe large changes in the spin-down torque up to a factor of approximately 4, which persist for several months. Using long-baseline phase-connected timing solutions as well as the overall frequency histories, we construct torque noise power spectra for each SGR (Soft Gamma Repeater). The power spectrum of each source is very red (power-law slope is approximately -3.5). The torque noise power levels are consistent with some accreting systems on timescales of approximately 1 yr, yet the full power spectrum is much steeper in frequency than any known accreting source. To the best of our knowledge, torque noise power spectra with a comparably steep frequency dependence have been seen only in young, glitching radio pulsars (e.g., Vela). The observed changes in spin-down rate do not correlate with burst activity; therefore, the physical mechanisms behind each phenomenon are also likely unrelated. Within the context of the magnetar model, seismic activity can not account for both the bursts and the long-term torque changes unless the seismically active regions are decoupled from one another.

Woods, Peter M.↗
NASA NTRS2002

Reproducibility and Repeatability of Tensile and Low-Cycle Fatigue Properties in Propulsion Grade Hydrogen

Hydrogen has the potential of increased use in the future as an environmentally friendly fuel. It has, however, shown a tendency to embrittle some materials. To be used in a safe manner and to exploit its full potential, it will be necessary to develop a database of material properties in hydrogen environment. The tests needed to produce this data are costly to perform (tensile test cost 25 times more and low cycle fatigue test are 55 times as expensive). Moreover, there is presently a lack of universal test methods to ensure standardized data within the hydrogen community. Each of the industries that work with hydrogen (aerospace, petroleum, fuel cells, etc.) performs tests by their own laboratory-developed methods, thus rendering cross- comparisons of material property data highly questionable. It is extremely important that data generated in a hydrogen environment be done to a standard that reduces variance to a minimum and allows direct comparison of test results from different laboratories. Doing so will assure that all data generated can be used to further our understanding of the hydrogen effects and to make sure components/products designed for hydrogen are the safest and most reliable possible. This paper reviews the results of two 'round-robin' programs conducted by NASA-MSFC. These two programs examined the reproducibility and repeatability of tensile and low-cycle fatigue test results in high-pressure hydrogen environments. The studies indicated that even with the tightest controls available from current commercial standards, the reproducibility (between different laboratories) and repeatability (within a laboratory) results of the tensile tests exhibited five times the variance as in standard ambient air tests. The variance with the LCF tests were on the same order as with air tests, but that was due to the large variation present in the last Interlaboratory air program. The paper concludes with a recommendation for a program that would allow the development of improved test methods, leading to lower variance in the generation of mechanical property data in the future.

Vesely, E. J.↗