Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reservoir Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Analysis of Microseismicity and Reactivated Fault Size to Assess the Potential for Felt Events by CO 2 Injection in the Illinois Basin

The results of monitoring of carbon dioxide (CO 2 ) injection at the Illinois Basin—Decatur Project (IBDP) and the companion Illinois Industrial Carbon Capture and Sequestration Sources (IL-ICCS) project—have shown that reservoir response to fluid pressure changes can vary significantly at different injection locations within the same reservoir. Predrill reservoir characterization is important to identify potentially seismogenic faults. However, interpretations of newly reprocessed 3D seismic reflection data illustrate the challenges related to their identification in a region dominated by faulting with small vertical offsets. Faults interpreted in the 3D seismic volume range from ~300 to 1200 m wide and are in the same size range as faults that could have been the source of historical events up to Mw 2.7 in central Illinois. The array of monitoring sensors that was installed for the IBDP continues to collect data, as injection operates in IL-ICCS, the second injection well. CO 2 injection rates for the IL-ICCS well are on average 1.7 times the rates injected in the IBDP well, but a significantly reduced rate of induced seismicity is observed. This article presents results of passive seismic monitoring for the duration of the project to date, integrating active and passive seismic data to develop a new interpretation of the subsurface structure at the Decatur site that explicitly identifies pathways for fluid flow into the basement leading to induced seismicity, and provides a geological explanation for the sharp reduction of induced seismicity during injection at higher rates into the second well. The use of seismic moment to estimate the length of seismogenic slip planes in the local subsurface suggests that faults large enough to produce felt seismicity are unlikely to be present at or near the Decatur site.

Geochemistry & Geophysics↗
DOE OSTI2021

Developing Upscaling Approach for Swarming Hydraulic Fractures Observed at Hydraulic Fracturing Test Site through Multiscale Simulations

We show that this work aims to address a challenge posed by recent observations of tightly spaced hydraulic fractures in core samples from the hydraulic fracturing test site (HFTS) in the Middle Wolfcamp Formation. Many fractures in retrieved cores have subfoot spacing, which is at odds with conventional models in which usually one hydraulic fracture is initiated per cluster. Models assuming a single fracture at each cluster, although a common practice, often predict excessive fracture propagation that is inconsistent with microseismic observation. Here, we aim to develop a numerical approach to effectively account for densely spaced hydraulic fractures in field-scale simulations. Because it is impractical to explicitly model all aforementioned fractures, we develop a new upscaling law that enables existing simulation tools to predict reservoir response to fracture swarms. The upscaling law is derived based on an energy equivalence argument and validated through multiscale simulations using a high-fidelity code, GEOS. The swarming fractures are first modeled with a spacing that is much smaller than the cluster spacing; these fractures are then approximated by an upscaled, single fracture based on the proposed upscaling law. The upscaled fracture is shown to successfully match the energy input rate and produce the total fracture aperture and average propagation length of the explicitly simulated swarm. Afterward, the upscaling approach is further implemented in 3D field-scale simulations and validated against the HFTS microseismic data of a horizontal well. Our results show that hydraulic fracture swarming can significantly affect fracture propagation behaviors compared with the propagation of single fractures as assumed by conventional modeling approaches. Under the considered situations, the conventional treatment yields fast propagation speed that far exceeds that indicated by the microseismic data. We also illustrate that this discrepancy can be reduced readily through the implementation of the upscaling law. Our results demonstrate the importance of accounting for the fracture swarming effect in field-scale simulations and the efficacy of this approach to enable realistic predictions of reservoir responses to fracture swarms, without the need to model tightly spaced fractures individually.

02 PETROLEUM↗
DOE OSTI2021

Predicting Cement-Sheath Integrity with Consideration of Initial State of Stress and Thermoporoelastic Effects

In conventional wellbore-integrity analysis, the cement sheath’s initial state of stress and transient thermoporoelastic effects are often neglected. However, the initial state of stress is prerequisite information for accurately predicting the safe operating conditions that prevent a cemented well from being damaged. In addition, transient thermoporoelastic effects can have a profound effect on when damage will occur. Here in this paper, we propose a model that includes these effects to predict the safe operating pressures and temperatures that will prevent cement-sheath failure. For the initial state of stress, we proposed an empirical model using measurements. Subsequent stress changes are evaluated by a fully coupled transient thermoporoelastic model to analyze the mechanical behavior of the cement sheath. We predict the safe operating envelope (SOE) for shear, tensile, and debonding cement-sheath failures caused by pressure and temperature perturbations after the cement sets. Our model predicts that pore pressure is a key factor for cement failure, especially for rapid temperature changes. If the formation is low permeability, the transient pore pressures are amplified, causing the risk of damage to increase. Compared with conventional thermoelastic models, the thermoporoelastic model predicts a smaller SOE when heating the internal casing fluid and a larger envelope when cooling the internal casing fluid. Finally, the heating rate was considered with respect to field applications. The heating rate was also considered, and slower heating/cooling rates can prevent damage to the cement sheath. Finally, the thermoporoelastic model was applied to explain several laboratory and field experiments and achieved good matches.

02 PETROLEUM↗
DOE OSTI2020

InSAR Monitoring to Evaluate Surface Changes with CO 2 Storage in a Depleted Oil Field in Northern Michigan

Battelle evaluated the potential use of Interferometric Synthetic Aperture Radar (InSAR) for monitoring the outcome of injected CO 2 at the Dover 33 reef near Gaylord, Michigan. InSAR is a satellite-based technology that provides high-precision information on the movement of ground surface in areas with high radar coherence (e.g., roads, buildings, bare soils). Depending on the setting, this technique may provide a useful tool for characterizing reservoirs by measuring surface deformations from activities such as brine water disposal; production of water, oil, and/or gas; and carbon capture, utilization, and storage (CCUS).

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

InSAR Monitoring to Evaluate Surface Changes with CO 2 Storage in a Depleted Oil Field in Northern Michigan (Volume II.E)

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. This report describes the effort under MRCP to evaluate the potential use of Interferometric Synthetic Aperture Radar (InSAR) for monitoring the outcome of injected CO 2 at the Dover 33 reef near Gaylord, Michigan. InSAR is a satellite-based technology that provides high-precision information on the movement of ground surface in areas with high radar coherence (e.g., roads, buildings, bare soils). Depending on the setting, this technique may provide a useful tool for characterizing reservoirs by measuring surface deformations from activities such as brine water disposal; production of water, oil, and/or gas; and carbon capture, utilization, and storage (CCUS).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Marcellus Shale Energy and Environment Laboratory (MSEEL) (Final Report)

The objective of the Marcellus Shale Energy and Environment Laboratory (MSEEL) was to provide a long-term field site to develop and validate new knowledge and technology to improve recovery efficiency and minimize environmental implications of unconventional resource development. MSEEL initiated in October 2014 and completed in September 2021. Total project value was $\$29,765,067$, support from the US Department of energy totaled $\$16,608,355$ with a cost share of $\$13,156,712$ primarily from Northeast Natural Energy. This report in a departure from previous reports summarizes the overarching results and outlines the approach taken. We cover two recent efforts in machine learning and reservoir characterization and simulation. Numerous quarterly reports, public presentations and numerous external publications cover specific results by subtopic and in detail. Publications are listed in the Appendix.

03 NATURAL GAS↗
DOE OSTI2025

Carbon Utilization and Storage Partnership of the Western United States

This technical report documents research conducted under DOE Award No. DE-FE0031837 focused on evaluating the feasibility of carbon capture, utilization, and storage (CCUS) systems in the central and western United States. The project integrated geologic characterization, reservoir simulation, infrastructure modeling, and economic analysis to assess CO₂ storage potential near industrial sources and develop strategies for transport and sequestration. The work included subsurface modeling, risk assessment, monitoring and verification (MRV) planning, and evaluation of regulatory pathways such as EPA Underground Injection Control (UIC) Class VI permitting and IRS 45Q tax credit eligibility. Results demonstrate the viability of multiple storage approaches, including saline formations, enhanced coalbed methane recovery, and basalt mineralization, supported by data-driven workflows and regional analyses. The project also produced permitting templates, technology transfer activities, and stakeholder engagement efforts to support deployment readiness. These findings contribute to the development of scalable, economically viable CCUS systems and provide a repeatable framework for future carbon management projects.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Multiple experimental studies of pore structure and mineral grain sizes of the Woodford shale in southern Oklahoma, USA

Pore structure study is an important part of unconventional shale reservoir characterization, since the pore system provides the primary petroleum storage space and fluid flow pathways. Previous studies have suggested that the pore structure is related to the total organic carbon (TOC) content, mineral compositions, and the maturity of the organic matter (OM). However, few studies have focused on the mineral grains, the primary grains being deposited but before cementation, which are the building blocks of shale. Eight Woodford Shale outcrop samples from southern Oklahoma were chosen to study the effects of mineral grain size on the pore structure characterization, using multiple and complementary experimental approaches, including laser diffraction, mineralogy, TOC, pyrolysis, liquid immersion porosimetry, mercury intrusion porosimetry, gas physisorption, (ultra) small angle X-ray scattering, scanning electron microscopy, and spontaneous imbibition. The results from different experiments of eight samples show that the Woodford Shale has the mean mineral grain diameters at 3–6 μm, a wide range of porosity at 3–40% and pore diameters at 50–1,000 nm, and various pore connectivity. Grain size variation was probably caused by the sea-level fluctuation during its deposition, which affect the porosity, pore size distribution, and pore connectivity. With decreasing mineral grain sizes, the porosity tends to increase while the pore connectivity worsens. The results also indicate that OM and carbonates in this low-maturity Woodford Shale could block the pores and decrease the porosity. Coupling with the grain size analyses, the control of depositional environment on grain sizes and subsequent effects on pore structure is identified. The pore structure characteristics over a wide pore-diameter range provided by multiple experiments could improve the understanding of storage space and fluid flow in the Woodford Shale to further increase its petroleum production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Permeability Prediction Using Vision Transformers

Accurate permeability predictions remain pivotal for understanding fluid flow in porous media, influencing crucial operations across petroleum engineering, hydrogeology, and related fields. Traditional approaches, while robust, often grapple with the inherent heterogeneity of reservoir rocks. With the advent of deep learning, convolutional neural networks (CNNs) have emerged as potent tools in image-based permeability estimation, capitalizing on micro-CT scans and digital rock imagery. This paper introduces a novel paradigm, employing vision transformers (ViTs)—a recent advancement in computer vision—for this crucial task. ViTs, which segment images into fixed-sized patches and process them through transformer architectures, present a promising alternative to CNNs. We present a methodology for implementing ViTs for permeability prediction, its results on diverse rock samples, and a comparison against conventional CNNs. The prediction results suggest that, with adequate training data, ViTs can match or surpass the predictive accuracy of CNNs, especially in rocks exhibiting significant heterogeneity. This study underscores the potential of ViTs as an innovative tool in permeability prediction, paving the way for further research and integration into mainstream reservoir characterization workflows.

58 GEOSCIENCES↗
NASA NTRS1994

D/H ratios and H2O contents of mantle-derived amphibole megacrysts from Dish Hill, California

D/H ratios are, in principle, useful in characterizing reservoirs of mantle hydrogen and as tracers of volatile transfer processes in Earth's interior. In practice, however, interpretation of isotopic measurements on mantle derived H is complicated by surface processes such as contamination and degassing which may alter the primary D/H ratio. Although there are indications that water associated with subduction zones and certain chemically enriched basalts is enriched in D relative to 'typical' upper mantle water, the extent of isotopic heterogeneity of mantle H remains uncertain. Kaersutitic amphibole megacrysts in alkaline basalts are one of the most widespread sources of mantle water and are therefore potentially useful for large-scale regional studies of D/H variation. However, D/H ratios of these amphiboles vary widely (from plus 8 to minus 113 percent), even in samples from the same locality, so that this potential has yet to be realized. In order to investigate the origin of this variability, and to explore the possibility that primary mantle D/H ratios may be deduced from these amphiboles, we analyzed the D/H ratios and chemical compositions of a suite of 17 kaersutitic amphiboles from Dish Hill, California. This work contrasts with previous studies in which sampling is widespread, but representatives from any given locality are few. Samples were collected from a restricted area on the southern flank of the volcanic center and are associated with the basal volcanic breccia. Fourteen of the samples were large single crystals or crystal fragments (megacrysts, 0.4 to 30 grams), believed to derive from pegmatitic veins crystallized from melts in the mantle. Two were coarse-grained intergrowths of amphibole with olivine and spinel, and one was a thin (2 mm) selvage on a peridotite xenolith.

Bell, David R.↗
DOE OSTI2025

Overcoming Data Scarcity in Carbon Storage Assessment: Estimating Petrophysical Properties in Legacy Wells Integrating Sample Logs and Geostatistical Approaches

Geological CO2 sequestration feasibility studies in mature basins frequently face challenges associated with legacy well data, which often lack the comprehensive logging suites required for accurate reservoir characterization. This study evaluates the storage potential of Ordovician– Devonian formations in a filed in the Delaware Basin portion of the Permian Basin, using a dataset of 47 wells.

58 GEOSCIENCES↗
DOE OSTI2026

From Subsurface to System: Offshore CCS Development for the Northeastern U.S. Atlantic Shelf

This study evaluated offshore carbon sequestration potential and infrastructure design along the mid-north Atlantic outer continental shelf, addressing the limited onshore storage options in the northeastern U.S. The objective was to define viable CCS pathways by integrating geological characterization, reservoir modeling, and system-level engineering for decarbonizing regional industrial sources. The work was conducted under US DOE grant FE0032407 for the Regional Initiatives and builds on a previous prospective resources assessment project by Battelle.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Interpreting strain tensor data to characterize and monitor reservoirs for CO2 storage and other applications

Recent advances in instrumentation have made it feasible to measure the transient strain tensor caused by small changes in fluid volume or pressure in the subsurface and this has opened the door to new opportunities for characterization and monitoring. We have deployed strainmeters and then conducted injection well tests in an underlying reservoir at 530m depth. The resulting data indicated that the horizontal strain at shallow strainmeters (30 to 40m depth) was tensile and the vertical strain was compressive. The radial strain was less than the horizontal strain, and the strain rates decreased from 100 nanostrain/day to roughly 10 n/d over a few days. The signal at two strainmeters at shallow depth were consistent, although the magnitude of the horizontal strains were different reflecting the different radial directions from the well. The signal at a deep strainmeter deployed at reservoir depth was much different, with tensile vertical strains and compressive horizontal strains. These data can be interpreted by inverting poroelastic forward models developed using numerical and analytical methods. The average horizontal strain in the caprock resembles the transient pressure in the underlying reservoir and classic type-curve methods from transient well testing can be used for preliminary interpretations of strain data. We have developed closed-form analytical solutions to a pressurized poroelastic inclusion and inhomogeneity in a half-space. This model is fast and can be inverted to estimate reservoir stiffness and geometry. Numerical models developed using finite element methods allow more details of the subsurface to be included in the inversion, but they require much longer run times and this makes inversion cumbersome using standard methods. We have developed an inversion approach that uses a proxy model created using machine learning to do most of the forward calculations. The proxy model is periodically updated and refined using the finite element model to ensure accuracy. This approach significantly reduces the computational requirements and makes it feasible to use Bayesian inversion with large numerical models. We have shown that the strain tensor in the caprock is sensitive to pressure in the reservoir, boundaries in the reservoir, and pressure in the caprock caused by leaks. These results indicate that coupling strain tensor data with inversion has the potential to help evaluate reservoirs during initial characterization, and to monitor them during the CO2 injection and storage process.

Murdoch, Larry↗
DOE OSTI2026

Improving Production in the Emerging Paradox Oil Play (Final Technical Report)

This report documents the results of the DOE-funded project Improving Production in the Emerging Paradox Oil Play, focused on integrating geological characterization, petrophysical analysis, reservoir simulation, and field development planning to improve hydrocarbon recovery from the Paradox Basin. Project activities included core and log analysis, assessment of reservoir heterogeneity and compartmentalization, evaluation of completion and stimulation strategies, and development of an uncertainty-aware field development framework. Findings highlight the importance of selective completions, geology-driven well placement, and targeted stimulation in vertically heterogeneous carbonate reservoirs.

02 PETROLEUM↗
DOE OSTI2022

Application of machine learning to characterize gas hydrate reservoirs in Mackenzie Delta (Canada) and on the Alaska north slope (USA)

Here, artificial neural network-trained models were used to predict gas hydrate saturation distributions in permafrost-associated deposits in the Eileen Gas Hydrate Trend on the Alaska North Slope (ANS), USA and at the Mallik research site in the Beaufort-Mackenzie Basin, Northwest Territories, Canada. The database of Logging-While-Drilling (LWD) and wireline logs collected at five wells (Mount Elbert, Ignik Sikumi, and Kuparuk 7–11–12 wells at ANS, plus 2L-38 and 5L-38 wells at the Mallik research site) includes more than 10,000 depth points, which were used for training, validation, and testing the machine learning (ML) models. Data used in training the ML models include the well logs of density, porosity, electrical resistivity, gamma radiation, and acoustic wave velocity measurements. Combinations of two or three out of these five well logs were found to reliably predict the gas hydrate saturation with accuracy varying between 80 and 90% when compared to the gas hydrate saturations derived from Nuclear Magnetic Resonance (NMR)-based technique. The ML models trained on data from three ANS wells achieved high fidelity predictions of gas hydrate saturation at the Mallik site. The results obtained in this study indicate that ML models trained on data from one geological basin can successfully predict key reservoir parameters for permafrost-associated gas hydrate accumulations within another basin. A generalized approach for selecting a well log combination that can improve model accuracy is discussed. Overall, the study outcome supports earlier work demonstrating that ML models trained on non-NMR well logs are a viable alternative to physics-driven methods for predicting gas hydrate saturations.

58 GEOSCIENCES↗
DOE OSTI2023

Using the Shallow Strain Tensor to Characterize Deep Geologic Reservoirs

Abstract Storing and recovering water, carbon, and heat from geologic reservoirs is central to managing resources in a changing climate. We tested the hypothesis that the strain tensor caused by injecting or producing fluids can be measured at shallow depths and interpreted to advance understanding of underlying deep aquifers or reservoirs. Geodetic‐grade strainmeters were deployed at 30 m depth overlying the Bartlesville Formation, a 500‐m‐deep sandstone near Tulsa, OK. The strainmeters are 220 m east of injection well 9A completed in a permeable lens at the base of the Bartlesville Formation. Water was injected into well 9A at approximately 1.0 L/s during four tests that ranged in duration from a few hours to a few weeks. The horizontal strain increased (tension) and the circumferential strain was a few times larger than the radial strain. The vertical strain decreased (compression) during injection. Strain rates were approximately 100 nε/day during the first few hours, but the rates decreased and were approximately 10 nε/day during most of the tests. Four independent methods of poroelastic simulation and inversion predict reservoir properties and geometries that are similar to each other and consistent with independent information about the reservoir. All strain interpretations predict that a boundary to the permeable lens occurs beneath the vicinity of the strainmeters, which is consistent with core data from the site. The boundary of the permeable lens is located by matching the vertical, radial and circumferential strains, which demonstrates the value of measuring the strain tensor.

Murdoch, Lawrence C.↗