Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reservoir Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Brine Extraction and Treatment Strategies to Enhance Pressure Management and Control of CO 2 Plumes in Deep Geologic Formations

The overall goal of the this project is to develop and validate pressure management and carbon dioxide (CO 2 ) plume control strategies that can address technical and economic barriers to commercial deployment of CO 2 storage technologies, based on computational and field demonstration work at the Archer Daniels Midland Company (ADM) facility where the Illinois Basin–Decatur Project (IBDP) and the Illinois-Industrial Carbon Capture and Storage (IL-ICCS) projects are located. To accomplish the overall goal, the ISGS designed a brine extraction storage test (BEST) that could be completed in two phases. The goal of BEST Phase I was to evaluate the feasibilities of extraction well(s) placement, the brine extraction to CO 2 injection rate ratio, extraction well completion, and brine treatment and handling. The goal of BEST Phase II would be to validate the brine extraction and treatment options deemed feasible in Phase I by (1) demonstrating the efficacy of brine extraction (BE) in managing pressure (i.e., formation) and the CO 2 plume, and (2) demonstrating treatment of extracted brine with high total dissolved solids (TDS; >200,000 mg/L) using multiple advanced treatment technologies. This report details work done in Phase I. Several brine extraction and treatment scenarios were tested, simulated, and analyzed for their effectiveness in extracting brine. Initially a vertical well was studied; however, geologic modeling, reservoir modeling, and the existing facility and wellbore infrastructure dictated that the location of a vertical brine extraction well was limited to an area with no existing monitoring wells and where the well would be in relative proximity to an existing CO 2 plume. Consequently, a vertical well was excluded, and a horizontal brine extraction well placed above the existing CO 2 plume near two existing wells was studied. The horizontal well option allows the project to leverage the availability of cased-hole logs and cross-well tomography to monitor CO 2 saturation and plume distribution, respectively. Because of the proximity of the horizontal well option to two existing wells, no additional monitoring well (or caprock penetration) is required. The recommended brine extraction pilot design options are (1) a horizontal extraction well at the base of the Middle Mt. Simon, which is 350–520 ft (107–158 m) above the CO 2 plume at CCS#1 and VW#1; or (2) a vertical extraction well 0.5 mi (0.8 km) from CCS#2 in a direction approximately southeast of CCS#2, perpendicular to the direction of high hydraulic connectivity. A horizontal extraction well has advantages over a vertical extraction well, including less risk of drilling into an existing CO 2 plume and it can be located between two other wells that can be used for monitoring. Thus, because the two existing wells can serve as monitoring wells, it eliminates the need for a third verification well and allows for a lower extraction rate to control the CO 2 plume and pressure. Managing pressure and the CO 2 plume distribution via brine extraction creates the obvious and important challenge of handling and treating the extracted brine. There were three options for brine disposal: (1) underground injection control (UIC) disposal well, (2) brine treatment and industrial use, and (3) brine pretreatment and discharge into municipal wastewater system. The primary design elements were budget and permitting requirements. The disposal well would be a vertical well drilled and completed into the Potosi Dolomite. For the range of extraction rates anticipated, the cost of this well is relatively constant. The cost of brine treatment is highly depends on the extraction rate, which depends on the well orientation. If relatively high rates are required, the vertical disposal well option is more favorable; for relatively lower rates, the two brine treatment options have lower costs. Life-cycle-analysis studies on extracted brine handling options suggest that a UIC well has a lower environmental impact than brine treatment. Both brine disposal options using brine treatment require removal of suspended solids from the extracted brine. The most suitable commercially available technology and the most promising emerging and innovative technology are recommended for implementation in Phase II. Though the challenges of this project are written specific to Decatur, every CO 2 storage site considering the use of brine extraction integrated with CO 2 storage will have similar, if not identical, technical and logistical challenges.

58 GEOSCIENCES↗

Carbonated Brine Injection Pilot Plan

This is a three-year effort to develop a plan for carbonated brine injection, with an end goal of a path for pilot scale implementation. Carbonated brine injection (CBI) strategy was planned for a potential pilot site through simulation study. Methods include geology model, reservoir modeling, wellbore materials compatibility and corrosion modeling, reactive transport modeling.

Xiong, Wei↗

From core-scale experiment to reservoir-scale modeling: A scale-up approach to investigate reaction-induced permeability evolution of CO2 storage reservoir and caprock at a U.S. CO2 storage site

Mineral dissolution and secondary mineral precipitation can cause porosity and permeability changes of CO 2 storage reservoirs and caprocks after injection of CO 2 . In this paper, a 3-step approach (core-scale experiment →core-scale modeling →reservoir-scale modeling) is developed to simulate reservoir-scale porosity and permeability evolution of CO 2 storage formation and caprock at a model CO 2 storage site. The model site is based on characteristics of a real site in Mississippi, USA. Important chemical and permeability modeling parameters in the reservoir-scale model are validated by core-scale experimental and reactive transport modeling results. The reservoir-scale model predicts a maximum 3.2% permeability increase of the CO 2 storage formation and a maximum 1.1% permeability increase of the caprock after 1000 years of exposure to CO 2 -rich brine, while the core-scale model predicts 7% permeability decrease for a small CO 2 storage formation core and 296% permeability increase for a small caprock core after 180-day exposure to CO 2 -rich brine. The discrepancy between permeability results of reservoir-scale model and core-scale model is attributed to strong pH buffering effect of CO 2 storage formation with large mass of H+-consuming minerals. Therefore, using core-scale experiments/models only is not sufficient to elucidate reservoir-scale permeability evolution. Variations of key model parameters have a small effect on permeability evolution of both CO 2 storage formation and caprock, except for variations of K eq (SiO 2 (am)) and the exponent n in permeability-porosity correlation. SiO 2 (am) is a key mineral that governs permeability evolution of CO 2 storage formation and caprock, given the characteristics of the model CO 2 storage site.

58 GEOSCIENCES↗

T2Well/ECO2N Version 1.0: Multiphase and Non-Isothermal Model for Coupled Wellbore-Reservoir Flow of Carbon Dioxide and Variable Salinity Water

T2Well/ECO2N is a coupled wellbore and reservoir model for simulating the dynamics of CO2 injection and leakage through wellbores. It can be seen as an extension to standard TOUGH/ECO2N V2.0, and can be applied to situations relevant to geologic CO2 storage involving upward flow (e.g., leakage) and downward flow (injection). The new simulator integrates a wellbore-reservoir system by assigning the wellbore and reservoir to two different sub-domains in which flow is controlled by appropriate physical laws. In the reservoir, we model flow using a standard multiphase Darcy flow approach. In the wellbores, we use the Drift-Flux Model and related conservation equations for describing transient two-phase non-isothermal wellbore flow of CO2-water mixtures. The mass and thermal energy balance equations are solved numerically by a finite difference scheme with wellbore heat transmission to the surrounding rock handled either semi-analytically or numerically. The momentum balance equation for the flow in the wellbore is solved numerically with a semi-explicit scheme.

Oldenburg, CurtM↗

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations

Active Management of Integrated Geothermal–CO2 Storage Reservoirs in Sedimentary Formations: An Approach to Improve Energy Recovery and Mitigate Risk : FY1 Final Report The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal energy production. Phase 1 includes reservoir analyses to determine injector/producer well schemes that balance the generation of economically useful flow rates at the producers with the need to manage reservoir overpressure to reduce the risks associated with overpressure, such as induced seismicity and CO2 leakage to overlying aquifers. This submittal contains input and output files of the reservoir model analyses. A reservoir-model "index-html" file was sent in a previous submittal to organize the reservoir-model input and output files according to sections of the FY1 Final Report to which they pertain. The recipient should save the file: Reservoir-models-inputs-outputs-index.html in the same directory that the files: Section2.1.*.tar.gz files are saved in.

15 GEOTHERMAL ENERGY↗

Integrated Geothermal-CO2 Storage Reservoirs: FY1 Final Report

The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal energy production. Phase 1 includes reservoir analyses to determine injector/producer well schemes that balance the generation of economically useful flow rates at the producers with the need to manage reservoir overpressure to reduce the risks associated with overpressure, such as induced seismicity and CO2 leakage to overlying aquifers. This submittal contains input and output files of the reservoir model analyses. A reservoir-model "index-html" file was sent in a previous submittal to organize the reservoir-model input and output files according to sections of the FY1 Final Report to which they pertain. The recipient should save the file: Reservoir-models-inputs-outputs-index.html in the same directory that the files: Section2.1.*.tar.gz files are saved in.

15 GEOTHERMAL ENERGY↗

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations

Active Management of Integrated Geothermal–CO2 Storage Reservoirs in Sedimentary Formations: An Approach to Improve Energy Recovery and Mitigate Risk : FY1 Final Report The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal energy production. Phase 1 includes reservoir analyses to determine injector/producer well schemes that balance the generation of economically useful flow rates at the producers with the need to manage reservoir overpressure to reduce the risks associated with overpressure, such as induced seismicity and CO2 leakage to overlying aquifers. This submittal contains input and output files of the reservoir model analyses. A reservoir-model "index-html" file was sent in a previous submittal to organize the reservoir-model input and output files according to sections of the FY1 Final Report to which they pertain. The recipient should save the file: Reservoir-models-inputs-outputs-index.html in the same directory that the files: Section2.1.*.tar.gz files are saved in.

15 GEOTHERMAL ENERGY↗

Modeling Subsurface Performance of a Geothermal Reservoir Using Machine Learning

Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells—increasing or decreasing the fluid flow rates across the wells—and drilling new wells at appropriate locations. The latter is expensive, time-consuming, and subject to many engineering constraints, but the former is a viable mechanism for periodic adjustment of the available fluid allocations. In this study, we describe a new approach combining reservoir modeling and machine learning to produce models that enable such a strategy. Our computational approach allows us, first, to translate sets of potential flow rates for the active wells into reservoir-wide estimates of produced energy, and second, to find optimal flow allocations among the studied sets. In our computational experiments, we utilize collections of simulations for a specific reservoir (which capture subsurface characterization and realize history matching) along with machine learning models that predict temperature and pressure timeseries for production wells. We evaluate this approach using an “open-source” reservoir we have constructed that captures many of the characteristics of Brady Hot Springs, a commercially operational geothermal field in Nevada, USA. Selected results from a reservoir model of Brady Hot Springs itself are presented to show successful application to an existing system. In both cases, energy predictions prove to be highly accurate: all observed prediction errors do not exceed 3.68% for temperatures and 4.75% for pressures. In a cumulative energy estimation, we observe prediction errors that are less than 4.04%. A typical reservoir simulation for Brady Hot Springs completes in approximately 4 h, whereas our machine learning models yield accurate 20-year predictions for temperatures, pressures, and produced energy in 0.9 s. This paper aims to demonstrate how the models and techniques from our study can be applied to achieve rapid exploration of controlled parameters and optimization of other geothermal reservoirs.

15 GEOTHERMAL ENERGY↗

CO 2 storage and potential fault instability in the St. Lawrence Lowlands sedimentary basin (Quebec, Canada): Insights from coupled reservoir-geomechanical modeling

In this paper, coupled reservoir-geomechanical (TOUGH-FLAC) modeling is applied for the first time to the St. Lawrence Lowlands region to evaluate the potential for shear failure along pre-existing high-angle normal faults, as well as the potential for tensile failure in the caprock units (Utica Shale and Lorraine Group). This activity is part of a general assessment of the potential for safe CO 2 injection into a sandstone reservoir (the Covey Hill Formation) within an Early Paleozoic sedimentary basin. Field and subsurface data are used to estimate the sealing properties of two reservoir-bounding faults (Yamaska and Champlain faults). The spatial variations in fluid pressure, effective minimum horizontal stress, and shear strain are calculated for different injection rates, using a simplified 2D geological model of the Becancour area, located ~110 km southwest of Quebec City. The simulation results show that initial fault permeability affects the timing, localization, rate, and length of fault shear slip. Contrary to the conventional view, our results suggest that shear failure may start earlier for a permeable fault than for a sealing fault, depending on the site-specific geologic setting. In simulations of a permeable fault, shear slip is nucleated along a 60 m long fault segment in a thin and brittle caprock unit (Utica Shale) trapped below a thicker and more ductile caprock unit (Lorraine Group) – and then subsequently progresses up to the surface. In the case of a sealing fault, shear failure occurs later in time and is localized along a fault segment (300 m) below the caprock units. The presence of the inclined low-permeable Yamaska Fault close to the injection well causes asymmetric fluid-pressure buildup and lateral migration of the CO 2 plume away from the fault, reducing the overall risk of CO 2 leakage along faults. Finally, fluid-pressure-induced tensile fracturing occurs only under extremely high injection rates and is localized below the caprock units, which remain intact, preventing upward CO 2 migration.

58 GEOSCIENCES↗

Machine Learning Assisted Reservoir Operation Model for Long–Term Water Management Simulation

This study explores strategies for long-term reservoir simulations by combining generic rule-based reservoir management model (RMM) and machine learning (ML) models for two major multipurpose reservoirs — Allatoona Lake and Lake Sidney Lanier in the southeastern United States. First, a standalone RMM is developed to simulate daily release and storage during Water Year 1981–2015. Next, using Long-Short Term Memory (LSTM) as the ML technique, a standalone LSTM model is trained based on reservoir inflow and meteorological observations to simulate reservoir release and estimate reservoir storage through water balance calculation. Three hybrid modeling strategies are developed, one using RMM output as an additional LSTM input (H1), another using LSTM as the initial release estimate in RMM (H2), and the third combining the first two strategies (H3). The Nash–Sutcliffe efficiency (NSE) for release (NSE-r), storage (NSE-s), and their mean (NSE-avg) are used for model evaluation. Overall, H1 improves NSE-r to 0.65 and 0.54 for Allatoona and Lanier, respectively, compared to standalone RMM (0.44 and 0.21); however, its storage trajectory did not produce a physically feasible solution, similar to LSTM. H2 and especially H3 show that they can retain the best features from RMM and LSTM, with H3 NSE-avg being 0.695 and 0.55 for Allatoona and Lanier outperforming RMM (0.615 and 0.29). In conclusion, the findings suggest a robust simulation capacity for large-scale water management in future studies.

54 ENVIRONMENTAL SCIENCES↗

T2Well/ECO2N Version 1.0: Multiphase and Non-Isothermal Model for Coupled Wellbore-Reservoir Flow of Carbon Dioxide and Variable Salinity Water

At its most basic level, the injection of CO{sub 2} into geologic CO{sub 2} storage sites involves a system comprising the wellbore and the target reservoir. The wellbore is the only conduit available to emplace CO{sub 2} into reservoirs for long-term storage. At the same time, wellbores in general have been identified as the most likely conduit for CO{sub 2} and brine leakage from geologic carbon sequestration (GCS) sites, especially those in sedimentary basins with historical hydrocarbon production. We have developed a coupled wellbore and reservoir model for simulating the dynamics of CO{sub 2} injection and leakage through wellbores. The model describes the following processes: (1) upward or downward wellbore flow of CO{sub 2} and variable salinity water with transition from supercritical to gaseous CO{sub 2} including Joule-Thomson cooling, (2) exsolution of CO{sub 2} from the aqueous phase as pressure drops, and (3) cross flow into or interaction with layers of surrounding rock (reservoirs). We use the Drift-Flux Model and related conservation equations for describing transient two-phase non-isothermal wellbore flow of CO{sub 2}-water mixtures under different flow regimes and interacting with surrounding rock. The mass and thermal energy balance equations are solved numerically by a finite difference scheme with wellbore heat transmission to the surrounding rock handled either semi-analytically or numerically. The momentum balance equation for the flow in the wellbore is solved numerically with a semi-explicit scheme. This manual provides instructions for compilation and use of the new model, and presents some example problems to demonstrate its use.

54 ENVIRONMENTAL SCIENCES↗

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs: Preprint

Subsurface data analysis, reservoir modeling, and machine learning (ML) techniques have been applied to the Brady Hot Springs (BHS) geothermal field in Nevada, USA to further characterize the subsurface and assist with optimizing reservoir management. Hundreds of reservoir simulations have been conducted in TETRAD-G and CMG STARS to explore different injection and production fluid flow rates and allocations and to develop a training data set for ML. This process included simulating the historical injection and production since 1979 and prediction of future performance through 2040. ML networks were created and trained using TensorFlow based on multilayer perceptron (MLP), long short-term memory (LSTM), and convolutional neural network (CNN) architectures. These networks took as input selected flow rates, injection temperatures, and historical field operation data and produced estimates of future production temperatures. This approach was first successfully tested on a simplified single fracture doublet system, followed by the application to the BHS reservoir. Using an initial BHS dataset with 37 simulated scenarios, the trained and validated network predicted the production temperature for 6 production wells with the mean absolute percentage error of less than 8%. In a complementary analysis effort, the principal component analysis applied to 13 BHS geological parameters revealed that vertical fracture permeability shows the strongest correlation with fault density and fault intersection density. A new BHS reservoir model was developed considering the fault intersection density as proxy for permeability. This new reservoir model helps to explore under-exploited zones in the reservoir. A data gathering plan to obtain additional subsurface data was developed; it includes temperature surveying for three idle injection wells, at which the reservoir simulations indicate high bottom-hole temperatures. The collected data assist with calibrating the reservoir model and may lead to converting these wells to producers to access under-exploited zones in the reservoir. Data gathering activities are planned for the first quarter of 2021.

40 EE - Geothermal Technologies Office (EE-4G)↗

Comparison of greenhouse gas emission estimates from six hydropower reservoirs using modeling versus field surveys

As with most aquatic ecosystems, reservoirs play an important role in the global carbon (C) cycle and emit greenhouse gases (GHG) as carbon dioxide (CO 2 ) and methane (CH 4 ). However, GHG emissions from reservoirs are poorly quantified, especially in temperate systems, resulting in high uncertainty. We compared reservoir C emission estimates and uncertainty of diffusive, ebullitive, and degassing pathways in six hydropower reservoirs in the southeastern United States among four data sources: two field-based surveys and two models (including the GHG Reservoir “G-res” Tool). We found that CH 4 diffusion was most similar across data sources (modeled minus observed, bias = - 21 g CO 2-eq m -2 y -1 ) and had low relative uncertainty (coefficient of variation, CV = 0.98). On the other hand, CO 2 diffusion was least consistent across data sources (bias = - 518 g CO 2-eq m -2 y -1 ). Both field surveys indicated strong negative CO 2 diffusion (i.e., CO 2 uptake) at all reservoirs, while G-res estimated positive CO 2 diffusion. By extension, total C emissions showed similar discrepancies, leading to high uncertainty in upscaling and interpreting reservoir source-sink dynamics. Finally, CH 4 ebullition had the highest relative uncertainty (CV = 2.77) due to high variability across sites. We discuss limitations of field surveys and these models, including temperature-based annualization methods, varying definitions of ebullition zones, low sampling resolution, and lack of dynamism. Future field efforts focused on capturing variability in CO 2 diffusion and CH 4 ebullition will be especially valuable in reducing uncertainty and improving models to advance our understanding reservoir GHG emissions.

54 ENVIRONMENTAL SCIENCES↗

Illinois State Geological Survey (ISGS), Illinois Basin - Decatur Project (IBDP) Geological Models, July 7, 2021. Midwest Geological Sequestration Consortium (MGSC) Phase III Data Sets. DOE Cooperative Agreement No. DE-FC26-05NT42588.

Three geological models in Petrel (Mark of Schlumberger) and data output from shallow groundwater modeling using TOUGH Codes from Lawrence Berkeley National Laboratory, included under folders: Static_Geologic_Model, Dynamic_Reservoir_Model, Geomechanical_Model, and Groundwater_Model.

3D Geological Model↗

Improving deep learning performance for predicting large-scale geological ${{CO}_{2}}$ sequestration modeling through feature coarsening

Physics-based reservoir simulation for fluid flow in porous media is a numerical simulation method to predict the temporal-spatial patterns of state variables (e.g. pressure p) in porous media, and usually requires prohibitively high computational expense due to its non-linearity and the large number of degrees of freedom (DoF). This work describes a deep learning (DL) workflow to predict the pressure evolution as fluid flows in large-scale 3-dimensional(3D) heterogeneous porous media. In particular, we develop an efficient feature coarsening technique to extract the most representative information and perform the training and prediction of DL at the coarse scale, and further recover the resolution at the fine scale by spatial interpolation. We validate the DL approach to predict pressure field against physics-based simulation data for a field-scale 3D geologic CO 2 sequestration reservoir model. We evaluate the impact of feature coarsening on DL performance, and observe that the feature coarsening not only decreases the training time by >74% and reduces the memory consumption by >75%, but also maintains temporal error 0.63% on average. Besides, the DL workflow provides predictive efficiency with 1406 times speedup compared to physics-based numerical simulation. The key findings from this research significantly improve the training and prediction efficiency of deep learning model to deal with large-scale heterogeneous reservoir models, and thus it can also be further applied to accelerate workflows of history matching and reservoir optimization for close-loop reservoir management.

58 GEOSCIENCES↗

The Kimberlina synthetic multiphysics dataset for CO 2 monitoring investigations

Abstract We present a synthetic multi‐scale, multi‐physics dataset constructed from the Kimberlina 1.2 CO 2 reservoir model based on a potential CO 2 storage site in the Southern San Joaquin Basin of California. Among 300 models, one selected reservoir‐simulation scenario produces hydrologic‐state models at the onset and after 20 years of CO 2 injection. Subsequently, these models were transformed into geophysical properties, including P‐ and S‐wave seismic velocities, saturated density where the saturating fluid can be a combination of brine and supercritical CO 2 , and electrical resistivity using established empirical petrophysical relationships. From these 3D distributions of geophysical properties, we have generated synthetic time‐lapse seismic, gravity and electromagnetic responses with acquisition geometries that mimic realistic monitoring surveys and are achievable in actual field situations. We have also created a series of synthetic well logs of CO 2 saturation, acoustic velocity, density and induction resistivity in the injection well and three monitoring wells. These were constructed by combining the low‐frequency trend of the geophysical models with the high‐frequency variations of actual well logs collected at the potential storage site. In addition, to better calibrate our datasets, measurements of permeability and pore connectivity have been made on cores of Vedder Sandstone, which forms the primary reservoir unit. These measurements provide the range of scales in the otherwise synthetic dataset to be as close to a real‐world situation as possible. This dataset consisting of the reservoir models, geophysical models, simulated time‐lapse geophysical responses and well logs forms a multi‐scale, multi‐physics testbed for designing and testing geophysical CO 2 monitoring systems as well as for imaging and characterization algorithms. The suite of numerical models and data have been made publicly available for downloading on the National Energy Technology Laboratory's (NETL) Energy Data Exchange (EDX) website.

58 GEOSCIENCES↗

Alternative CAES Technology Using Depleted Unconventional Gas Wells and Subsurface Thermal Energy Storage (GeoCAES)

This project assessed the technical viability of a process called GeoCAES. The process stores electrical energy by injecting natural gas into shale gas formations using a compressor, storing it, and producing it through an expander to generate electricity. This data submission includes the models of temperature and pressure changes in the wellbore, surface plant equipment (compressor and expander), and the code used in CMG GEM reservoir modeling software to simulate injection and production. Note - the wellbore and surface plant equipment models use the REFPROP Excel Add-in from NIST (linked in submission) to calculate natural gas properties. Note - the reservoir model code requires a license for the Computer Modeling Group (CMG) GEM reservoir modeling software (linked in submission) to run it.

15 GEOTHERMAL ENERGY↗

Mimetic Finite Differences and Algebraic Multilevel Methods for Reservoir Performance Predictions: CRADA Final Report

The need to better predict and control reservoir performance is driving the development of increasingly sophisticated reservoir models that use unstructured general polyhedral grids to capture highly detailed stratigraphy. However, both discretization methods and scalable iterative solution algorithms for these situations are an active area of research. In this work we compared the performance of a new Mimetic Finite Difference (MFD) method with two new Mixed Finite Element methods, and LANL and the CRADA Participant investigated the performance of Los Alamos National Laboratory’s algebraic multigrid code on realistic flow problems. Furthermore, uncertainty quantification requires rapid evaluations of reservoir models. To do this, fine-scale reservoir models need to be coarsened and yet important fine-scale features and processes that have a significant impact on flows need to be preserved. To this end, we investigated the use of multi-resolution methods, such as the Multilevel Multiscale Mimetic (M3) method, to coarsen reservoir models.

97 MATHEMATICS AND COMPUTING↗