Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPECTRAL RESOLUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Adaptation of the University of Wisconsin High Spectral Resolution Lidar for Polarization and Multiple Scattering Measurements

A new implementation of the High Spectral Resolution Lidar (HSRL) in an instrument van which allows measurements during field experiments is described. The instrument was modified to provide measurements of depolarization. In addition, both the signal amplitude and depolarization variations with receiver field of view are simultaneously measured. These modifications allow discrimination of ice clouds from water clouds and observation of multiple scattering contributions to the lidar return.

Eloranta, E. W.↗

Spatial and spectral resolution necessary for remotely sensed vegetation studies

An outline is presented of the required spatial and spectral resolution needed for accurate vegetation discrimination and mapping studies as well as for determination of state of health (i.e., detection of stress symptoms) of actively growing vegetation. Good success was achieved in vegetation discrimination and mapping of a heterogeneous forest cover in the ridge and valley portion of the Appalachians using multispectral data acquired with a spatial resolution of 15 m (IFOV). A sensor system delivering 10 to 15 m spatial resolution is needed for both vegetation mapping and detection of stress symptoms. Based on the vegetation discrimination and mapping exercises conducted at the Lost River site, accurate products (vegetation maps) are produced using broad-band spectral data ranging from the .500 to 2.500 micron portion of the spectrum. In order of decreasing utility for vegetation discrimination, the four most valuable TM simulator VNIR bands are: 6 (1.55 to 1.75 microns), 3 (0.63 to 0.69 microns), 5 (1.00 to 1.30 microns) and 4 (0.76 to 0.90 microns).

Rock, B. N.↗

High resolution spectral analyses of the Jovian decametric radiation. I - Burst morphology and drift rates

Morphological analyses of high-resolution spectral recordings of Jovian decametric radiation show a regime of phenomena not seen at lower resolutions. Observed emissions range from narrow-band (50 kHz) simple quasi-periodic bursts to wide-band emissions (extending over a 500-kHz passband) exhibiting complex structural detail. Assuming gyroemission from electrons in a dipole field for which the magnetic moment is 10 Gauss Jupiter-radius-cubed, drift-rate measurements of the bursts indicate that the source size is of the order of 600 km and its location is near 1.3 Jupiter radii at a colatitude of 27.3 deg. The measurements suggest that the emitting electrons belong to a population having a very specific equatorial pitch angle near 3.5 deg. This study concludes that it may be possible to verify gyroemission as the mechanism responsible for the decametric radiation.

Krausche, D. S.↗

High Spectral Resolution Lidar Measurements of Extinction and Particle Size in Clouds

The University of Wisconsin High Spectral Resolution Lidar (HSRL) measures optical properties of the atmosphere by separating the Doppler broadened molecular backscatter return from the unbroadened aerosol return. In the past, the HSRL employed a 150 mm diameter Fabry-Perot etalon to separate the aerosol and molecular signals. The replacement of the etalon with an I2 absorption filter significantly improved the ability of the HSRL to separate weak molecular signals inside dense clouds.

Eloranta, E. W.↗

NASA Langley Airborne High Spectral Resolution Lidar Instrument Description

NASA Langley Research Center (LaRC) recently developed the LaRC Airborne High Spectral Resolution Lidar (HSRL) to make measurements of aerosol and cloud distribution and optical properties. The Airborne HSRL has undergone as series of test flights and was successfully deployed on the Megacity Initiative: Local and Global Research Observations (MILAGRO) field mission in March 2006 (see Hair et al. in these proceedings). This paper provides an overview of the design of the Airborne HSRL and descriptions of some key subsystems unique to this instrument.

Harper, David B.↗

Airborne High Spectral Resolution Lidar Measurements of Aerosols over Major Metropolitan Areas

NASA Langley Research Center airborne High Spectral Resolution Lidars have participated in several NASA field missions designed to study air quality over major metropolitan regions. Data from these instruments reveal the temporal and spatial variabilities of aerosol distributions over these urban areas, quantify aerosol backscatter, extinction, and depolarization near the surface, and provide additional relevant information regarding aerosol optical thickness, mixed layer height, and aerosol type. We show that measurements of surface PM2.5 concentrations typically are more directly related to coincident near-surface measurements of aerosol extinction than coincident measurements of aerosol optical thickness.

lidar↗

High-spectral-resolution measurements of the H I 1216 and Mg II 2800 emissions from Arcturus

High-spectral-resolution scans of H I 1216 and Mg II 2796, 2803 obtained using the ultraviolet spectrometer abroad the Copernicus satellite show broad and very asymmetrical emission profiles. The ratio of the line widths to the solar values is consistent with a law similar to the Wilson-Bappu relation for the calcium K reversal. A fit of the interstellar absorption profile indicates that the average H density toward this nearby star is low, 0.02-0.1 per cu cm.

Moos, H. W.↗

High spectral resolution lidar to measure optical scattering properties of atmospheric aerosols. I - Theory and instrumentation

A high spectral resolution lidar technique to measure optical scattering properties of atmospheric aerosols is described. Light backscattered by the atmosphere from a narrowband optically pumped oscillator-amplifier dye laser is separated into its Doppler broadened molecular and elastically scattered aerosol components by a two-channel Fabry-Perot polyetalon interferometer. Aerosol optical properties, such as the backscatter ratio, optical depth, extinction cross section, scattering cross section, and the backscatter phase function, are derived from the two-channel measurements.

Shipley, S. T.↗

High spectral resolution reflectance spectroscopy of minerals

The reflectance spectra of minerals are studied as a function of spectral resolution in the range from 0.2 to 3.0 microns. Selected absorption bands were studied at resolving powers as high as 2240. At resolving powers of approximately 1000, many OH-bearing minerals show diagnostic sharp absorptions at the resolution limit. At low resolution, some minerals may not be distinguishable, but as the resolution is increased, most can be easily identified. As the resolution is increased, many minerals show fine structure, particularly in the OH-stretching overtone region near 1.4 micron. The fine structure can enhance the ability to discriminate between minerals, and in some cases the fine structure can be used to determine elemental composition.

Clark, Roger N.↗

The 27-28 October 1986 FIRE IFO Cirrus Case Study: Cloud Optical Properties Determined by High Spectral Resolution Lidar

During the First ISCCP Region Experiment (FIRE) cirrus intensive field observation (IFO) the High Spectral Resolution Lidar was operated from a roof top site on the University of Wisconsin-Madison campus. Because the HSRL technique separately measures the molecular and cloud particle backscatter components of the lidar return, the optical thickness is determined independent of particle backscatter. This is accomplished by comparing the known molecular density distribution to the observed decrease in molecular backscatter signal with altitude. The particle to molecular backscatter ratio yields calibrated measurements of backscatter cross sections that can be plotted ro reveal cloud morphology without distortion due to attenuation. Changes in cloud particle size, shape, and phase affect the backscatter to extinction ratio (backscatter-phase function). The HSRL independently measures cloud particle backscatter phase function. This paper presents a quantitative analysis of the HSRL cirrus cloud data acquired over an approximate 33 hour period of continuous near zenith observations. Correlations between small scale wind structure and cirrus cloud morphology have been observed. These correlations can bias the range averaging inherent in wind profiling lidars of modest vertical resolution, leading to increased measurement errors at cirrus altitudes. Extended periods of low intensity backscatter were noted between more strongly organized cirrus cloud activity. Optical thicknesses ranging from 0.01-1.4, backscatter phase functions between 0.02-0.065 sr (exp -1) and backscatter cross sections spanning 4 orders of magnitude were observed. the altitude relationship between cloud top and bottom boundaries and the cloud optical center altitude was dependent on the type of formation observed Cirrus features were observed with characteristic wind drift estimated horizontal sizes of 5-400 km. The clouds frequently exhibited cellular structure with vertical to horizontal dimension ratios of 1:5-1:1.

Grund, C. J.↗

High spectral resolution lidar to measure optical scattering properties of atmospheric aerosols. II - Calibration and data analysis

The high spectral resolution lidar (HSRL) measures optical properties of atmospheric aerosols by interferometically separating the elastic aerosol backscatter from the Doppler broadened molecular contribution. Calibration and data analysis procedures developed for the HSRL are described. Data obtained during flight evaluation testing of the HSRL system are presented with estimates of uncertainties due to instrument calibration. HSRL measurements of the aerosol scattering cross section are compared with in situ integrating nephelometer measurements.

Sroga, J. T.↗

Remotely-Sensed Aerosol Optical Properties Retrieved from a High Spectral Resolution Lidar (HSRL) During the FIREX-AQ Field Campaign

The NASA Langley Research Center’s High Spectral Resolution Lidar with Differential Absorption Lidar (HSRL-DIAL) instrument was flown on the NASA DC-8 aircraft during the Fire Influence on Region to Global Environments and Air Quality (FIREX-AQ; https://www.esrl.noaa.gov/csl/projects/firex-aq/) field campaign. The airborne HSRL-DIAL system retrieves aerosol backscatter and depolarization at 3 wavelengths (355, 532, and 1064 nm), aerosol extinction at 532 nm, and ozone concentration (differential at 290 and 300 nm). Additionally, the HSRL-DIAL system incorporates both a zenith and nadir telescope allowing for retrievals from in-smoke sampling to be integrated through the plume. During the first portion of the FIREX-AQ campaign, the DC8 aircraft sampled more than ten large-scale fires with varying fuels, combustion stages, and metrological conditions, with some fires being sampled multiple times across separate days. This presentation focuses on the retrievals of aerosol backscatter (at 532 and 1064 nm), aerosol depolarization (at 532 nm and 1064 nm), aerosol optical thickness (at 532 nm), lidar ratio, and color ratio to examine the changes in these properties in the smoke plume as they are advected downwind.

Taylor Shingler↗

Airborne High Spectral Resolution Lidar-2 Measurements of Enhanced Depolarization in Marine Aerosols

Airborne NASA Langley Research Center (LaRC) High Spectral Resolution Lidar-2 (HSRL-2) measurements acquired during the recent NASA EVS-3 Aerosol Cloud Meteorology Interactions over the Western Atlantic Experiment (ACTIVATE) revealed enhanced particulate linear depolarization associated with aerosols within the marine boundary layer. These HSRL-2 observations were acquired off the east coast of the United States in February and March 2020 when this lidar was deployed on the NASA LaRC UC-12 aircraft. HSRL-2 measured profiles of aerosol backscattering, extinction,and depolarization at 355 and 532nm and aerosol backscattering and depolarization at 1064nm. Typically HSRL-2 measures low (<5%) linear particulate depolarization associated with marine sea salt aerosols. However, during several ACTIVATE flights, particularly those that occurred with outbreaks of cold, dry air, linear particulate depolarization exceeded 15-20% (532nm) for aerosols within a few hundred meters above the surface. These high values indicated that these particles were nonspherical. Elevated depolarization values were also observed at 355 and 1064 nm. HSRL-2 measured aerosol extinction/backscatter ratio (“lidar ratio”) values around 20-25 sr (355 and 532 nm) that are typically associated with sea salt particles. Coincident measurements of relative humidity from dropsondes released from the UC-12and in situ Diode Laser Hygrometer (DLH) measurements flown on the NASA HU-25 aircraft showed that highest depolarization values of these nonspherical particles were found when the relative humidity (RH)was below 50-60%.These lidar observations of elevated depolarization associated with sea salt aerosol are consistent with previous lidar measurements of sea salt aerosols in dry conditions. We discuss these HSRL-2 measurements also in the context of coincident airborne in situ measurements of particle size and composition acquired on the HU-25 aircraft. We also found that CALIOP satellite measurements observed elevated depolarization during some similar cold air outbreaks. In such cases, the operational CALIOP algorithms attributed the elevated depolarization to nonspherical dust particles rather than the more likely scenario of nonspherical sea salt particles associated with low RH.

aerosols↗

Raman Interferometry between Autoionizing States to Probe Ultrafast Wave-Packet Dynamics with High Spectral Resolution

Photoelectron interferometry with femtosecond and attosecond light pulses is a powerful probe of the fast electron wave-packet dynamics, albeit it has practical limitations on the energy resolution. We show that one can simultaneously obtain both high temporal and spectral resolution by stimulating Raman interferences with one light pulse and monitoring the modification of the electron yield in a separate step. Applying this spectroscopic approach to the autoionizing states of argon, we experimentally resolved its electronic composition and time evolution in exquisite detail. Theoretical calculations show remarkable agreement with the observations and shed light on the light-matter interaction parameters. Using appropriate Raman probing and delayed detection steps, this technique enables highly sensitive probing and control of electron dynamics in complex systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Aerosol Profile Measurements from the NASA Langley Research Center Airborne High Spectral Resolution Lidar

Since achieving first light in December of 2005, the NASA Langley Research Center (LaRC) Airborne High Spectral Resolution Lidar (HSRL) has been involved in seven field campaigns, accumulating over 450 hours of science data across more than 120 flights. Data from the instrument have been used in a variety of studies including validation and comparison with the Cloud- Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite mission, aerosol property retrievals combining passive and active instrument measurements, aerosol type identification, aerosol-cloud interactions, and cloud top and planetary boundary layer (PBL) height determinations. Measurements and lessons learned from the HSRL are leading towards next-generation HSRL instrument designs that will enable even further studies of aerosol intensive and extensive parameters and the effects of aerosols on the climate system. This paper will highlight several of the areas in which the NASA Airborne HSRL is making contributions to climate science.

Obland, Michael D.↗

An Intercomparison of High Spectral Resolution Lidar and Satellite Ocean Color Backscatter Retrievals

We present an intercomparison of satellite ocean color and high spectral resolution lidar (HSRL) retrievals of upper ocean particulate backscattering (bbp) and diffuse attenuation coefficients (Kd). Ocean retrievals of bbp and Kd have been performed over a wide variety of optical and ecological domains using the NASA Langley Research Center HSRL-1 (532 nm) and the recently upgraded HSRL-2 (532 & 355 nm). These datasets provide a unique opportunity to perform a critical assessment of the HSRL technique and to explore the utility of HSRL measurements for evaluating the quality of ocean color remote sensing retrievals on regional scales. A matchup dataset of co-located and high-quality HSRL and ocean color remote sensing measurements was created using data from research flights conducted over the western North Atlantic Ocean during the NASA sponsored SABOR, NAAMES, and ACTIVATE campaigns. Overall, comparisons showed a strong agreement between HSRL and ocean color retrievals of bbp and Kd, providing confidence in our ability to retrieve upper ocean optical properties using oceanographic lidar. However, comparisons from individual flights can exhibit deviations that were not attributed to shifts in water column optical domains. In one of these cases, the simultaneous HSRL atmosphere-ocean retrievals from two consecutive days and within the same region were used to identify ocean color atmospheric correction errors resulting from the presence of absorbing aerosols. These results highlight the utility of airborne HSRL as a standalone ocean observing technology and as an independent and calibrated technique for assessing the quality of ocean color remote sensing retrievals.

Brian Collister↗

Cirrus cloud characteristics derived from volume imaging lidar, high spectral resolution lidar, HIS radiometer, and satellite

Preliminary measurement results are presented from the Cirrus Remote Sensing Pilot Experiment which used a unique suite of instruments to simultaneously retrieve cirrus cloud visible and IR optical properties, while addressing the disparities between satellite volume averages and local point measurements. The experiment employed a ground-based high resolution interferometer sounder (HIS) and a second Fourier transform spectrometer to measure the spectral radiance in the 4-20 micron band, a correlated high spectral resolution lidar, a volume imaging lidar, a CLASS radiosonde system, the Scripps Whole Sky Imager, and multispectral VAS, HIRS, and AVHRR satellite data from polar orbiting and geostationary satellites. Data acquired during the month long experiment included continuous daytime monitoring with the Whole Sky Imager.

Grund, Christian J.↗