SEARCH · Search NASA

Results for “STABILITY CALCULATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Experimental on-stream elimination of resonant whirl in a large centrifugal compressor

Resonant whirl condition during operation of a multi-stage centrifugal compressor at higher than anticipated speeds and loads was reported. The condition was diagnosed by a large scale computerized Machinery Condition Monitoring System (MACMOS). This computerized system verified that the predominant subsynchronous whirl frequency locked in on the first resonant frequency of the compressor rotor and did not vary with compressor speed. Compressor stability calculations showed the rotor system had excessive hearing stiffness and inadequate effective damping. An optimum bearing design which was developed to minimize the unbalance response and to maximize the stability threshold is presented.

Bhat, G. I.↗

NASA NTRS1992

The relationship between pressure-based and density-based algorithms

The PISO, pressure-based algorithm, is compared with implicit time-marching systems to ascertain their similarities and differences. Both methods are expressed in vector form for comparison purposes. The vector form of the PISO method is triangular, allowing an uncoupled solution procedure, while the Euler implicit method requires the simultaneous solution of all equations. Upwind differencing is performed according to the direction of the eigenvalues in both systems, but this is the particle velocity in the PISO method and the acoustic velocity in the Euler method. Vector stability calculations show that the PISO method is conditionally stable depending on the time step, but that it provides adequate damping at small time steps to enable good convergence. Unconditional stability can be provided by retaining the energy coupling terms in the time derivative. Transforming the Euler implicit equations to the PISO variables along with a modification of the time derivatives gives the density-based method the same amplification factors at low speeds as the pressure-based method without affecting their behavior at high speeds.

Merkle, Charles L.↗

NASA NTRS1954

A Transonic Wind-Tunnel Investigation of the Longitudinal Aerodynamic Characteristics of a Model of the Lockheed XF-104 Airplane

The transonic longitudinal aerodynamic characteristics of a 0.0858-scale model of the Lockheed XF-104 airplane have been obtained from tests at the Langley 16-foot transonic tunnel. The results of the investigation provide some general information applicable to the transonic properties of thin, low-aspect-ratio, unswept wing configurations utilizing a high horizontal tail . The model employs a horizontal tail mounted at the top of the vertical tail and a wing with an aspect ratio of 2.5, a taper ratio of 0.385, and 3.4-percent-thick airfoil sections. The lift, drag, and static longitudinal pitching moment were measured at Mach numbers from 0.80 t o 1.09 and angles of attack from -2.5 deg to 22.5 deg. Some of the dynamic longitudinal stability properties of the airplane have been predicted from the test results. In addition, some visual flow studies on the wing surfaces obtained at Mach numbers of 0.80 and 1.00 are included. Results of the investigation show that the transonic rise in drag coefficient at zero lift is about 0.030. At high angles of attack, the model becomes longitudinally unstable at Mach numbers from 0.80 t o 0.90, whereas a reduction in static stability is experienced when very high angles of attack are reached at Mach numbers above 0.90. Longitudinal dynamic stability calculations show that the longitudinal control is good at angles of attack below the unstable break in the static pitching-moment curves, but a typical corrective control applied after the occurrence of neutral stability has little effect in averting pitch-up.

Hieser, Gerald↗

NASA NTRS1974

Convection in the moon - Effect of variable viscosity

This work determines criteria for stability of the lunar interior to thermal convection in the case of variable viscosity. The conditions necessary for solid convection to play an important role in the moon's revolution are determined by application of the calculated stability criteria to a variety of thermal history models. Most thermal history temperature profiles would be unstable to solid convection at the present time, if currently used estimates of the viscosity function are applicable. A possible explanation of lunar seismic data is that temperatures near the melting point of silicates exist at depths greater than 800 km. If this is the case, either the lunar interior is stable, or solid convection is occurring at a rate insufficient to cool the lunar interior substantially. If the former is true, the viscosity of lunar material is higher than that usually assumed.

Cassen, P.↗

NASA NTRS1977

Phase relations in the Fe-Ni-Cr-S system and the sulfidation of an austenitic stainless steel

The stability fields of various sulfide phases that form on Fe-Cr, Fe-Ni, Ni-Cr and Fe-Cr-Ni alloys were developed as a function of temperature and the partial pressure of sulfur. The calculated stability fields in the ternary system were displayed on plots of log P sub S sub 2 versus the conjugate extensive variable which provides a better framework for following the sulfidation of Fe-Cr-Ni alloys at high temperatures. Experimental and estimated thermodynamic data were used in developing the sulfur potential diagrams. Current models and correlations were employed to estimate the unknown thermodynamic behavior of solid solutions of sulfides and to supplement the incomplete phase diagram data of geophysical literature. These constructed stability field diagrams were in excellent agreement with the sulfide phases and compositions determined during a sulfidation experiment.

Jacob, K. T.↗

NASA NTRS1988

The possible role of meridional flows in suppressing magnetic buoyancy

The equation of motion for a toroidal flux ring in a stellar convective envelope is derived, and the equilibrium of such a ring is considered. Necessary conditions for the stability of toroidal flux rings are derived, and results of stability calculations for a particular model of the meridional flow are presented. The motions of the flux rings when the rings are far from their equilibrium position or when equilibrium does not exist are considered. The results confirm the linear stability analysis, and show that in the absence of stable equilibrium, the rings move toward the solar surface along a trajectory which is parallel to the rotation axis. It is expected that viscosity will tend to reduce the rotational velocity difference between the flux ring and its surroundings, thus reducing the Coriolis force and altering the equilibrium. The storage time of toroidal flux rings is estimated, and some implications for the sun are discussed.

Van Ballegooijen, A. A.↗

NASA NTRS1992

Genesis of mobile troughs in the upper westerlies

Stability calculations on basic-state velocity profiles representative of the preferred regions for the development of the upper-level disturbances active in Type B cyclogenesis show that conditions in these regions (weak low-level baroclinicity, large low-level static stability, and large surface roughness) are favorable for the growth of baroclinic waves with maximum amplitude near the tropopause. The structure of these waves compares favorably with observations of developing short-wavelength upper-level troughs in the atmosphere. Basic states characteristic of the storm track regions (strong low-level baroclinicity and small surface roughness) favor the development of baroclinic waves with maximum amplitude at the surface. The dynamics of both the surface-trapped and the upper-tropospheric waves can be interpreted concisely using concepts of potential vorticity. Based on these results, a possible mechanism for Type B cyclogenesis in the storm track regions is proposed that involves the propagation and structural modification of baroclinic wave packets in a zonally varying basic flow.

Whitaker, Jeffrey S.↗

NASA NTRS1959

Effect of Artificial Pitch Damping on the Longitudinal and Rolling Stability of Aircraft with Negative Static Margins

A preliminary theoretical investigation has been made of the short-period longitudinal and steady-rolling (inertia coupling) stability of a hypersonic glider configuration for center-of-gravity locations rear-ward of the airplane neutral point. Such center-of-gravity positions for subsonic flight would improve performance by reducing supersonic and hypersonic static margins and trim drag. Results are presented of stability calculations and a simulator study for a velocity of 700 ft/sec and an altitude of 401,000 feet. With no augmentation, the airplane was rapidly divergent and was considered unsatisfactory in the simulator study. When a pitch damper was employed as a stability augmenter, the short-period mode became overdamped, and the airplane was easily controlled on the simulator. A steady-rolling analysis showed that the airplane can be made free of rolling divergence for all roll rates with an appropriate damper gain.

Moul, Martin T.↗

NASA NTRS1992

Aeroelastic stability analyses of two counter rotating propfan designs for a cruise missile model

Aeroelastic stability analyses were performed to insure structural integrity of two counterrotating propfan blade designs for a NAVY/Air Force/NASA cruise missile model wind tunnel test. This analysis predicted if the propfan designs would be flutter free at the operating conditions of the wind tunnel test. Calculated stability results are presented for the two blade designs with rotational speed and Mach number as the parameters. A aeroelastic analysis code ASTROP2 (Aeroelastic Stability and Response of Propulsion Systems - 2 Dimensional Analysis), developed at LeRC, was used in this project. The aeroelastic analysis is a modal method and uses the combination of a finite element structural model and two dimensional steady and unsteady cascade aerodynamic models. This code was developed to analyze single rotation propfans but was modified and applied to counterrotating propfans for the present work. Modifications were made to transform the geometry and rotation of the aft rotor to the same reference frame as the forward rotor, to input a non-uniform inflow into the rotor being analyzed, and to automatically converge to the least stable aeroelastic mode.

Mahajan, Aparajit J.↗

DOE OSTI2021

Numerical study of coronal plasma jet formation

A new scenario for solar flare eruption in the coronal holes is analyzed by using MHD stability concepts for a spheromak configuration. The stability properties of a spheromak partially embedded into a conducting surface are studied using three dimensional MHD simulations. In agreement with the analytical theory, a large degree of line-tying stabilizes the spheromak's tilt instability, while the elongation has a destabilizing effect. High-resolution nonlinear simulations also demonstrate current sheet formation at the upper surface of the spheromak, where the tilted magnetic field of the spheromak reconnects with the background magnetic field. The calculated stability threshold and the observed magnetic reconnection support a model of coronal jet eruptions where a dome-like magnetic structure grows through flux emergence on the solar surface, tilts, reconnects, and erupts. Countering the effect from elongation, line-tying strongly stabilizes a spheromak growing from a flux-emergence process, suggesting that to accelerate the onset of eruptive coronal jets, there must be magnetic reconnection at the bottom of the spheromak to detach the structure from the solar surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Accelerated Discovery of Solar Thermochemical Hydrogen Production Materials via High-Throughput Computational and Experimental Methods

In this project, combinatorial synthesis and testing methods were combined with high-throughput materials theory calculations to greatly accelerate the discovery of thermodynamically suitable candidates for green hydrogen production via a two-stage solar thermochemical water splitting (STCH) process. Over the course of the project, more than 8000 quinary and higher oxide compositions were computationally screened for STCH viability, and detailed stability calculations were performed for more than 30 of the most promising identified compositional archetypes. As a result, three new STCH capable compositional families were discovered and experimentally verified. The first, Ce x Sr 2-x MnO 4 (CSM), represents the first known Ruddlesden-Popper compound to show STCH activity, and thus demonstrates that perovskite-related structures may hold promise for this application. The second family, Sr 1-x Ce x MnO 3 (SCM), is the simple perovskite sister-analog to CSM. Sr 0.7 Ce 0.3 MnO 3 (SCM30), a member of this compositional family, was found to produce the highest hydrogen yields of any compound tested in this project, exceeding the end of project milestone target of > 150 μmol H 2 /gram oxide at a reduction temperature of 1350 °C, although only at steam-to-hydrogen ratios greater than 1000:1. Finally, we proved that a third novel Sr-and Mn-containing family, Sr 1-x Ca x Ti 1-y Mn y O 3 (SCTM), which was identified by Materials Project tools, also splits water. The behavior of the SCTM system was found to be similar to the previously discovered Sr 1-x La x Al 1-y Mn y O 3 (SLMA) family, albeit with lower H 2 yields. Across the three thrusts of the project (computational, combinatorial, and bulk testing), five journal articles were published. As part of Program End Analysis and Data Dissemination, relevant data used for the publications was uploaded to the HydroGEN Data Hub for public access, and in certain cases, results were added to public materials databases.

08 HYDROGEN↗

NASA NTRS1992

Streamline-curvature effect in three-dimensional boundary layers

The effect of including wall and streamline curvature terms in swept-wing boundary-layer stability calculations is studied. The linear disturbance equations are cast on a fixed, body-intrinsic, curvilinear coordinate system. Those nonparallel terms which contribute mainly to the streamline-curvature effect are retained in this formulation and approximated by their local finite-difference values. Convex-wall curvature has a stabilizing effect, while streamline curvature is destabilizing if the curvature exceeds a critical value.

Reed, Helen L.↗

NASA NTRS1993

Linear stability of streamwise developing longitudinal vortices

The linear stability of numerical solutions to the quasicylindrical equations of motion for swirling flows is investigated. Initial conditions are derived from Batchelor's similarity solution for a trailing line vortex. The stability calculations are performed using a 2nd-order accurate finitedifference scheme on a staggered grid with the accuracy of the computed eigenvalues enhanced through Richardson extrapolation. The streamwise development of both viscous and inviscid instability modes is discussed for low and high swirl cases. The effect of adverse and favorable pressure gradients on the viscous stability of a longitudinal vortex is also investigated.

Spall, Robert E.↗

DOE OSTI2021

Pellet triggering of edge localized modes in low collisionality pedestals at DIII-D

Edge localized modes (ELMs) are triggered using deuterium pellets injected into plasmas with ITER-relevant low collisionality pedestals, and the resulting peak ELM energy fluence is reduced by approximately 25%–50% relative to natural ELMs destabilized at similar pedestal pressures. Cryogenically frozen deuterium pellets are injected from the low-field side of the DIII-D tokamak at frequencies lower than the natural ELM frequency, and heat flux is measured by infrared cameras. Ideal MHD pedestal stability calculations show that without pellet injection, these low collisionality pedestals were limited by their current density (peeling-limited) rather than their pressure gradient (ballooning-limited). ELM triggering success correlates strongly with pellet mass, consistent with the theory that a large pressure perturbation is required to trigger an ELM in low collisionality discharges that are far from the ballooning stability boundary. For sufficiently large pellets, both instantaneous and time-integrated ELM energy deposition measured by infrared cameras is reduced with respect to naturally occurring ELMs at the inner strike point, which is the position where it is largest for natural ELMs. Energy fluence at the outer strike point is less effected. Cameras observing both heat flux and D-alpha emission often find significant toroidally asymmetric striations in the outboard far scrape-off layer resulting from ELMs that are triggered by pellets. Toroidal asymmetries at the inner strike point are similar between natural and pellet-triggered ELMs, indicating that the reduction in peak heat flux and total fluence at that location is robust for the conditions reported here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Validation of the GFS model for gyrokinetic stability of NSTX pedestal data

This study presents a large database validation of the gyro fluid system (GFS) model for linear gyrokinetic stability for high-mode (H-mode) edge transport barrier conditions in the national spherical torus experiment (NSTX) tokamak. The database of linear stability calculations with the CGYRO gyrokinetic code was produced using plasma profile measurements from NSTX discharges to identify kinetic ballooning modes (KBM), trapped electron modes (TEM), and micro-tearing modes (MTM) that limit the pressure profile gradient in the H-mode barrier. A novel Bayesian optimization approach determines optimal resolution parameters for GFS specifically for spherical tokamak pedestal conditions. Our results demonstrate that GFS, with optimized resolution, can achieve accurate linear stability analysis in NSTX pedestal conditions for reduced resolution compared to CGYRO. GFS can accurately find the KBM, TEM, and MTM instability branches. Parametric analysis reveals that GFS accuracy in this extreme pedestal parameter range is degraded for low magnetic shear and near the separatrix conditions. These findings establish GFS as a fast linear eigenmode solver for spherical tokamak pedestal gyrokinetic stability and demonstrate a systematic methodology for determining the optimum resolution settings.

Yang, Minglei [Oak Ridge National Laboratory (ORNL↗

NASA NTRS1993

Comparison of predictions with measurements for a quiet supersonic tunnel

Navier-Stokes and boundary layer calculations were made to study the mean flow through the Montana State University Mach 3 supersonic wind tunnel. Two-dimensional results along the nozzle surface are found to be in good agreement with experiment. For the sidewalls a 3D solution was necessary because of a skew-induced secondary flow that produced significant crossflows in the sidewall boundary layer and thickening of the boundary layer near the sidewall centerline. Boundary layer stability calculations revealed Goertler instabilities in the nozzle producing N factors up to 6. Preliminary results for the crossflow instability on the tunnel sidewall show a maximum N factor of about 2.5 under test conditions for which laminar flow was observed experimentally.

King, Lyndell S.↗

NASA NTRS2014

Effects of Forward- and Backward-Facing Steps on the Crossflow Receptivity and Stability in Supersonic Boundary Layers

The effects of forward- and backward-facing steps on the receptivity and stability of three-dimensional supersonic boundary layers over a swept wing with a blunt leading edge are numerically investigated for a freestream Mach number of 3 and a sweep angle of 30 degrees. The flow fields are obtained by solving the full Navier-Stokes equations. The evolution of instability waves generated by surface roughness is simulated with and without the forward- and backward-facing steps. The separation bubble lengths are about 5-10 step heights for the forward-facing step and are about 10 for the backward-facing step. The linear stability calculations show very strong instability in the separated region with a large frequency domain. The simulation results show that the presence of backward-facing steps decreases the amplitude of the stationary crossflow vortices with longer spanwise wavelengths by about fifty percent and the presence of forward-facing steps does not modify the amplitudes noticeably across the steps. The waves with the shorter wavelengths grow substantially downstream of the step in agreement with the linear stability prediction.

Balakumar, P.↗

NASA NTRS1943

The Effect of Mass Distribution on the Lateral Stability and Control Characteristics of an Airplane as Determined by Tests of a Model in the Free-flight Tunnel

The effects of mass distribution on lateral stability and control characteristics of an airplane have been determined by flight tests of a model in the NACA free-flight tunnel. In the investigation, the rolling and yawing moments of inertia were increased from normal values to values up to five times normal. For each moment-of-inertia condition, combinations of dihedral and vertical-tail area representing a variety of airplane configurations were tested. The results of the flight tests of the model were correlated with calculated stability and control characteristics and, in general, good agreement was obtained.

Campbell, John P↗