Search NASA⌕ Search

SEARCH · Search NASA

Results for “SURFACE TYPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Role of Non-Local Effects on Surface Sensible Heat Flux Under Different Types of Thermal Structures Over the Arctic Sea-Ice Surface

The effects of atmospheric thermal structure on the surface energy flux are poorly understood over the Arctic sea-ice surface. Here, we explore the mechanism of sensible heat exchange under different types of thermal structures over the Arctic sea-ice surface by using data collected during the Multidisciplinary drifting Observatory for the Study of Arctic Climate expedition. The quadrant analysis indicates that strong surface temperature inversions below 100 m enhance non-local effects on the positive (upward) sensible heat flux ($\overline{w'θ'}$) through entrainment of large eddies from the convective boundary layer aloft. However, strong surface inversions restrict the contributions of large eddies to the negative (downward) $\overline{w'θ'}$ due to intensified surface stability. By inspecting the existing parameterization schemes, we found that the European Center for Medium-Range Weather Forecasts Integrated Forecasting System scheme fails to predict the impacts of non-local processes on the positive $\overline{w'θ'}$, and an adjustment term to correct the bias of parameterized $\overline{w'θ'}$ is proposed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Bulk Fermi surfaces of the Dirac type-II semimetallic candidate NiTe 2

Here, we present a study on the Fermi surface of the Dirac type-II semimetallic candidate NiTe 2 via the temperature and angular dependence of the de Haas–van Alphen (dHvA) effect measured in single crystals grown through Te flux. In contrast to its isostructural compounds like PtSe 2 , band-structure calculations predict NiTe 2 to display a tilted Dirac node very close to its Fermi level that is located along the Γ to A high-symmetry direction within its first Brillouin zone. The angular dependence of the dHvA frequencies is found to be in agreement with the first-principles calculations when the electronic bands are slightly shifted with respect to the Fermi level (ε F ), and therefore provide support for the existence of a Dirac type-II node in NiTe 2 . Nevertheless, we observed mild disagreements between experimental observations and density functional theory (DFT) calculations as, for example, nearly isotropic and light experimental effective masses. This indicates that the dispersion of the bands is not well captured by DFT. Despite the coexistence of Dirac-like fermions with topologically trivial carriers, samples of the highest quality display an anomalous and large either linear or sublinear magnetoresistivity. Finally, this suggests that Lorentz invariance breaking Dirac-like quasiparticles dominate the carrier transport in this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Enhanced passivation and stability of negative charge injected SiN x with higher nitrogen content on the boron diffused surface of n-type Si solar cells

This paper explores the potential of the negatively charged SiN x using plasma charge injection technology to passivate the front textured boron-diffused emitter of n-type Si solar cells. The high-x value single SiN x layer with x ≥ 1.30 (x = N/Si) previously developed for the planarized rear-side passivation of p-type silicon solar cells, with an excellent passivation and charge stability, was found to be unacceptable for the passivation on the front textured boron emitter of n-type cells due to a severe bulk lifetime degradation issue. Therefore, in this study, we investigated a new concept of depositing a dual-x SiN x with a low-x SiN x layer (x~1.01) on top of a high-x SiN x layer (x~1.30) for passivation of the front textured rough surface of boron diffused emitter in n-type cells. Here, the optimized dual-x SiN x stack reveals the promise of charge retention for more than 25 years in field operation as well as excellent passivation of boron-doped emitter without bulk lifetime degradation. N-type cells with the optimized dual-x SiN x after charge injection show comparable cell performance to Al 2 O 3 passivated reference cells. The results of cell-level light stability tests using one-cell minimodules exhibit cell performance decay characteristics similar to the traditional Al 2 O 3 /SiN x passivated reference module.

14 SOLAR ENERGY↗
DOE OSTI2026

WHONDRS Surface Water and Sediment Geochemistry and Organic Matter Characterization Data from Streams across HJ Andrews Experimental Forest, Oregon (v2)

This dataset supports a broader study developing conceptual models for river corridor critical zone processes across spatial scales and was generated in collaboration with the HJ Andrews River Corridor Critical Zone Workshop in 2025. The dataset provides surface water geochemistry (dissolved organic carbon, total dissolved nitrogen) from 48 sites across the HJ Andrews Experimental Forest, Oregon (https://andrewsforest.oregonstate.edu). Some of the sites have been impacted by the Holiday Farm Fire and the Lookout Fire in 2020 and 2023, respectively. Related data were collected as part of the workshop and will be published separately in collaboration with other workshop attendees and available at http://www.hydroshare.org/resource/b274c4a234bf4b12b7cb8a54a696c629. Related genomic data can be found on the National Center for Biotechnology Information (NCBI) under BioProject PRJNA1503030 (see critical details section below for more information). Additional related data collected in 2016 from a similar effort can be found at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/3377027 and http://www.hydroshare.org/resource/ea6c0832885a46c3939e7bb22e48e754 and are described within https://doi.org/10.5194/essd-11-1-2019 (Ward et al., 2019). This data package was originally published in March 2026. It was updated in August 2026 (v2; new and modified files). See the change history section in the readme for more details. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) a folder of field photos, (2) a folder of raw Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data, (3) a data checks report, (4) a folder of sample data, (5) file-level metadata, (6) data dictionary, (7) field metadata, (8) readme, (9) international generic sample number (IGSN) mapping file; and (10) field protocol. The sample data subfolder contains surface water and sediment (1) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data and averages, (2) total dissolved nitrogen data and averages, (3) methods codes, (4) FTICR-MS methods; and (5) a subfolder of 9.4 Tesla (9.4T) FTICR-MS data. This folder contains the CoreMS processed data and seven subfolders, thee containing .xml files for each sample type (sediment, surface water and blank samples), three containing the sediment CoreMS output files for each sample type (sediment, surface water and blank samples), and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .Rmd, .py, .cal, .json, .jpg, or .jpeg.

Biogeochemistry↗
DOE OSTI2021

Integrating Arctic Plant Functional Types in a Land Surface Model Using Above‐ and Belowground Field Observations

Abstract Accurate simulations of high‐latitude ecosystems are critical for confident Earth system model (ESM) projections of carbon cycle feedbacks to global climate change. Land surface model components of ESMs, including the E3SM Land Model (ELM), simulate vegetation growth and ecosystem responses to changing climate and atmospheric CO 2 concentrations by grouping heterogeneous vegetation into like sets of plant functional types (PFTs). Many such models represent high‐latitude vegetation using only two PFTs (shrub and grass), thereby missing the diversity of vegetation growth forms and functional traits in the Arctic. Here, we use field observations of biomass and leaf traits across a gradient of plant communities on the Seward Peninsula in northwest Alaska to replace the original ELM configuration for the first time with nine Arctic‐specific PFTs. The newly developed PFTs include: (1) nonvascular mosses and lichens, (2) deciduous and evergreen shrubs of various height classes, including an alder PFT, (3) graminoids, and (4) forbs. Improvements relative to the original model configuration included greater belowground biomass allocation, persistent fine roots and rhizomes of nonwoody plants, and better representation of variability in total plant biomass across sites with varying plant communities and depth to bedrock. Simulations through 2100 using the RCP8.5 climate scenario and constant PFT fractional areas showed alder‐dominated plant communities gaining more biomass and lichen‐dominated communities gaining less biomass compared to default PFTs. Our results highlight how representing the diversity of arctic vegetation and confronting models with measurements from varied plant communities improves the representation of arctic vegetation in terrestrial ecosystem models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Density Functional Tight-Binding Simulations Reveal the Presence of Surface Defects on the Quartz (101)–Water Interface

Understanding the structure and reactivity of quartz–water interfaces is critical for numerous applications in the geological, environmental, and biological sciences. However, disagreements on the atomic-level structure of the interfaces between experiments and simulations are hampering our ability to predict the surface reactivity. Here, we used density functional tight-binding (DFTB)-based molecular dynamics to simulate a series of quartz (101) surfaces having different types and densities of surface defects in water and compared them with the structures determined by X-ray reflectivity measurements. The DFTB simulations are able to reproduce previous classical and quantum mechanical predictions of the pristine quartz (101)–water interface that disagree with experimental observations. To remedy this situation, a set of defective quartz surfaces having various surface silicon (Si) vacancies were built as indicated by recent experimental studies. We found that the rotation of surface [SiO 4 ] tetrahedra near Si vacancies can lead to outward displacements of Si atoms similar to those observed in the experiments. The presence of additional surface Si vacancies caused inward relaxations of terminal oxygens through the formation of hydrogen bonds. Finally, the overall results indicate that the quartz (101)–water interface may include a mixture of geminal (≡Si–(OH) 2 )- and vicinal (≡Si–OH)-type silanol groups together with the presence of surface Si vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding surfaces and interfaces in nanocomposites of silicone and barium titanate through experiments and modeling

Barium titanate (BTO) is a ferroelectric perovskite used in electronics and energy storage systems because of its high dielectric constant. Decreasing the BTO particle size was shown to increase the dielectric constant of the perovskite, which is an intriguing but contested result. We investigated this result by fabricating silicone-matrix nanocomposite specimens containing BTO particles of decreasing diameter. Furthermore, density functional theory modeling was used to understand the interactions at the BTO particle surface. Combining results from experiments and modeling indicated that polymer type, particle surface interactions, and particle surface structure can influence the dielectric properties of polymer-matrix nanocomposites containing BTO.

composite↗
DOE OSTI2020

Colorimetric Detection and Surface Decontamination of Metal Ions by Using Strippable Polymers - 20024

Strippable coating is a low cost and efficient decontamination method far more compatible for the cleaning of surfaces. This method allows contaminant entrapment and removal from different types of surfaces and also characterized by low-secondary waste generation after decontamination. The present work deals with the elaboration and testing of a new composition of Polyvinyl alcohol (PVA) aqueous solutions utilize the TTA (Thenoyl trifluoroacetone) ligand, employed as a strippable coating for the removal of metal ions e.g., UO{sub 2}{sup +2}, Ni{sup +2}, Cu{sup +2}, Fe{sup +3}, V{sup +5}, Eu{sup +3} and Cs{sup +} from 'contaminated' surfaces. The study aims at developing contaminant-sensing and decontaminating coatings for the detection and removal of metal ions from non porous surfaces. This 'smart' coating is shown to exhibit a clear contaminant dependent response in the form of color variation, and a detection sensitivity less than 0.5 μg per cm{sup 2}. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

The Effect of Surface Terminations on the Initial Stages of TiO 2 Deposition on Functionalized Silicon

As atomic layer deposition (ALD) emerges as a method to fabricate architectures with atomic precision, emphasis is placed on understanding surface reactions and nucleation mechanisms. ALD of titanium dioxide with TiCl 4 and water has been used to investigate deposition processes in general, but the effect of surface termination on the initial TiO 2 nucleation lacks needed mechanistic insights. Here, this work examines the adsorption of TiCl 4 on Cl–, H–, and HO– terminated Si(100) and Si(111) surfaces to elucidate the general role of different surface structures and defect types in manipulating surface reactivity of growth and non-growth substrates. The surface sites and their role in the initial stages of deposition are examined by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Density functional theory (DFT) computations of the local functionalized silicon surfaces suggest oxygen-containing defects are primary drivers of selectivity loss on these surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Microstructural characterization and equibiaxial flexural strength of CeO 2 and Ti-doped CeO 2

In this study, the synthesis of CeO 2 and titanium dioxide (TiO 2 ) doped CeO 2 (TDC) monoliths are investigated, and their fracture strength is assessed using an equibiaxial flexure testing technique at room temperature. Pellets were synthesized using conventional powder processing and sintering methods to produce the desired characteristics. The TiO 2 dopant concentration was optimized at 0.1 wt % TiO 2 to obtain dense, solid-solution pellets with an enhanced grain microstructure. A ball-on-ring fixture was used to obtain the TRS and Weibull parameters of over 30 pellets for CeO 2 and 0.1 wt % TDC to compare fracture behavior. The TRS of CeO 2 pellets ranged from 88 to 160 MPa and the TRS of 0.1 wt % TDC pellets ranged from 102 to 171 MPa, both being consistent with published values. Weibull parameters, such as characteristic strength and Weibull modulus, were extracted as 129 MPa and 8.5 for CeO 2 and 150 MPa and 9.3 for 0.1 wt % TDC, respectively. Although Hertzian contact damage was observed on compressive surfaces, failure initiation occurred on the tensile surfaces of both types of samples. Fracture surface analysis for CeO 2 indicated a predominantly intergranular fracture while 0.1 wt % TDC had a predominantly transgranular fracture mode. Finally, the TRS of 0.1 wt % TDC resulted in increased Weibull parameters when compared to CeO 2 , indicating sample chemistry and microstructure impact mechanical behavior for these samples.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Type-I CdS/ZnS Core/Shell Quantum Dot-Gold Heterostructural Nanocrystals for Enhanced Photocatalytic Hydrogen Generation

Developing Type-I core/shell quantum dots is of great importance toward fabricating stable and sustainable photocatalysts. However, the application of Type-I systems has been limited due to the strongly confined photogenerated charges by the energy barrier originating from the wide-bandgap shell material. In this project, we found that through the decoration of Au satellite-type domains on the surface of Type-I CdS/ZnS core/shell quantum dots, such an energy barrier can be effectively overcome and an over 400-fold enhancement of photocatalytic H(2) evolution rate was achieved compared to bare CdS/ZnS quantum dots. Transient absorption spectroscopic studies indicated that the charges can be effectively extracted and subsequently transferred to surrounding molecular substrates in a subpicosecond time scale in such hybrid nanocrystals. Based on density functional theory calculations, the ultrafast charge separation rates were ascribed to the formation of intermediate Au2S layer at the semiconductor-metal interface, which can successfully offset the energy confinement introduced by the ZnS shell. In conclusion, our findings not only provide insightful understandings on charge carrier dynamics in semiconductor-metal heterostructural materials but also pave the way for the future design of quantum dot-based hybrid photocatalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Role of Surface Features on the Initial Dissolution of CH 3 NH 3 PbI 3 Perovskite in Liquid Water: An Ab Initio Molecular Dynamics Study

In this study, the degradation of CH 3 NH 3 PbI 3 (MAPbI 3 ) hybrid organic inorganic perovskite (HOIP) by water has been the major issue hampering its use in commercial perovskites solar cells (PSCs) as MAPbI 3 HOIP have been known to easily degrade in the presence of water molecules. However, even though there have been numerous studies investigating this phenomenon, there is still no consensus on the mechanisms of initial stages of dissolution. Here, we attempt to consolidate differing mechanistic interpretations previously reported in the literature through the use of the first-principles constrained ab-initio molecular dynamics (AIMD) to study the mechanisms, kinetics, and thermodynamics that accompany the degradation of MAPbI 3 HOIP in liquid water. We consider not only the dissolution of the species found on the pristine MAPbI 3 HOIP surfaces, but also the dissolution from defect sites to imitate the successive degradation steps, and propose a sequence of events in the initial phase of MAPbI 3 HOIP dissolution. By comparing the dissolution free energy barrier between surface species of different surficial types, we find that the dominant dissolution mechanisms of surface species varies widely based on the specific surface features adjacent to the dissolving ion. The high sensitivity of dissolution mechanism to surface features has contributed to the many dissolution mechanisms proposed in the literature. In contrast, the dissolution free energy barriers are mainly determined by the dissolving species rather than the type of surfaces, and the type of surfaces the ions are dissolving from are inconsequential toward the dissolution free energy barrier. However, the presence of surface defects such as vacancy sites are found to significantly lower the dissolution free energy barriers. Based on the estimated dissolution free energy barriers from different types of surfaces that we investigated in this study, we proposed that the dissolution of MAPbI 3 HOIP in liquid water originates from surface defect sites that propagate laterally along the surface layer of the MAPbI 3 HOIP crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Non-contact imaging of terahertz surface currents with aperture-type near-field microscopy

Terahertz (THz) near-field imaging and spectroscopy provide valuable insights into the fundamental physical processes occurring in THz resonators and metasurfaces on the subwavelength scale. However, so far, the mapping of THz surface currents has remained outside the scope of THz near-field techniques. In this study, we demonstrate that aperture-type scanning near-field microscopy enables non-contact imaging of THz surface currents in subwavelength resonators. Through extensive near-field mapping of an asymmetric D-split-ring THz resonator and full electromagnetic simulations of the resonator and the probe, we demonstrate the correlation between the measured near-field images and the THz surface currents. The observed current dynamics in the interval of several picoseconds reveal the interplay between several excited modes, including dark modes, whereas broadband THz near-field spectroscopy analysis enables the characterization of electromagnetic resonances defined by the resonator geometry.

Norman, Sarah↗
DOE OSTI2026

Atomic‐Scale Surface Imaging of Bulk Epitaxial CsPbBr 3 Perovskite Single Crystals on Mica Using Light Assisted Scanning Tunneling Microscopy at Low‐Temperature (80 K)

Epitaxial single-crystalline CsPbBr 3 perovskite films on mica, prepared ex situ, are explored using a low-temperature scanning tunneling microscope (STM) by probing the unoccupied electronic states of their surface in ultra-high vacuum (UHV) at 80 K. Light-assisted STM measurements under a broadband illumination with visible light were employed to enhance and stabilize surface conductivity. STM imaging across the surface of macroscopic bulk CsPbBr 3 films reveals large flat terraces characterized by a specific type of surface reconstruction, consisting of parallel rows of U-shaped atomic nanostructures. These structures are spaced by 12 Å and exhibit an internal feature size of 5.1 Å. Density functional theory (DFT) calculations reproduce the experimental observations and reveal a competition between different orthorhombic CsPbBr 3 (110) surface reconstructions: a Cs-rich structure, identified as the most energetically stable, and three alternative Pb–Br-rich reconstructions, which are slightly higher in energy yet remain consistent with the STM data. Additional analyses that explicitly account for the mica substrate exclude the cubic CsPbBr 3 phase and other orthorhombic surface orientations, while showing that variations in the mica surface termination do not alter the preferred CsPbBr 3 (110) reconstruction. In conclusion, this combined approach thereby confirms our assignment and resolves previous STM interpretations of CsPbBr 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Rewritable Surface‐Grafted Polymer Brushes with Dynamic Covalent Linkages

Abstract Surface grafting of polymer brushes drastically modifies surface properties, including wettability, compatibility, responsiveness, etc. A broad variety of functionalities can be introduced to the surface via different types of polymers. Bringing together properties of two or more types of polymer brushes to one surface opens up even more possibilities in brush‐modified materials. However, while it is generally feasible to introduce several chemical compositions along the brushes via copolymerization, it is challenging to vary the types of polymer brushes along a surface. Although previous studies have demonstrated binary brushes via orthogonal polymerization techniques or partial deactivation/regrafting, they commonly limit the number of polymer types to two. Here, we propose a strategy to introduce dynamic covalent diketoenamine linkages at the root of polymer brushes. The grafting density could be precisely tuned during surface functionalization. The surface‐anchored polymer brushes were cleaved by the addition of small molecule amines. New polymer brushes can be regrafted from the surface following refunctionalization of exposed sites. The maneuverability allows tuning of the types and densities of the polymer brushes, pointing the way to the preparation of a new generation of well‐defined brush‐modified materials with mixed grafts, with potential applications in the design of smart materials and surfaces.

Cui, Feichen↗