Search NASA⌕ Search

SEARCH · Search NASA

Results for “Secondary amines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Multi-functionalized basic immobilized amine sorbents for removal of metal contaminants from wastewater

This disclosure provides polyamine sorbent compositions for the separation of metals from aqueous solutions. The polyamine sorbent compositions comprise a silica support, an aminosilane bound to the silica support, an epoxysilane bound to the silica support, and a polyamine where the polyamine is chemically tethered onto a solid silica support through via the epoxysilane. The polyamine may be further stabilized within the bulk sorbent through hydrogen bonding interactions with the aminosilane. The sorbent compositions resist leaching by H 2 O in an aqueous stream containing heavy oxyanion-based (and other) metals and demonstrate stability over a pH range of 2-14. The sorbent compositions are useful for the separation of metals from aqueous solutions. The cationic heavy metals are captured by the co-existing amine groups (—NH 2 , —NH, —N) from the polymeric network while additional metal capture capacity is derived from the introduction of a secondary silane linker.

Gray, McMahan L.↗
NASA NTRS1987

Surface characterization in composite and titanium bonding: Carbon fiber surface treatments for improved adhesion to thermoplastic polymers

The effect of anodization in NaOH, H2SO4, and amine salts on the surface chemistry of carbon fibers was examined by X-ray photoelectron spectroscopy (XPS). The surfaces of carbon fibers after anodization in NaOH and H2SO4 were examined by scanning transmission electron microscopy (STEM), angular dependent XPS, UV absorption spectroscopy of the anodization bath, secondary ion mass spectrometry, and polar/dispersive surface energy analysis. Hercules AS-4, Dexter Hysol XAS, and Union Carbide T-300 fibers were examined by STEM, angular dependent XPS, and breaking strength measurement before and after commercial surface treatment. Oxygen and nitrogen were added to the fiber surfaces by anodization in amine salts. Analysis of the plasmon peak in the carbon 1s signal indicated that H2SO4 anodization affected the morphological structure of the carbon fiber surface. The work of adhesion of carbon fibers to thermoplastic resins was calculated using the geometric mean relationship. A correlation was observed between the dispersive component of the work of adhesion and the interfacial adhesion.

Devilbiss, T. A.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-31522-DND

Currently, there are limitations in launch capability regarding requisite payload volume and mass for long duration extra-terrestrial missions. In-space additive manufacturing may provide a solution to this challenge and is applicable for articles ranging from large system and subsystem architectures to small consumables and replacement articles. For small articles, additive manufacturing is becoming more feasible through advances in instrumentation and novel manufacturing strategies capable of generating complex shapes. Many approaches, however, utilize feedstock materials that, once consumed, must be replenished before additional architectures can be generated. Thus, although promising, a major challenge with additive manufacturing is the required starting materials to support on-demand article generation. This presentation describes research toward reversibly assembling materials that can revert to the starting material state for subsequent fabrication. Polyimides were synthesized with thermally reversible Diels-Alder reaction functionalities, furan or maleimide moieties. These materials were characterized utilizing typical spectroscopic, thermal, and mechanical techniques. Amine hardener-enriched epoxy microparticles were synthesized for use as a mechanically robust substrate. Integration of these technologies into a single system and application toward generation of secondary structures on a launch vehicle as a means of in-situ resource utilization will be described.

Christopher J. Wohl↗
DOE OSTI2022

Shape memory polymers

New shape memory polymer compositions, methods for synthesizing new shape memory polymers, and apparatus comprising an actuator and a shape memory polymer wherein the shape memory polymer comprises at least a portion of the actuator. A shape memory polymer comprising a polymer composition which physically forms a network structure wherein the polymer composition has shape-memory behavior and can be formed into a permanent primary shape, re-formed into a stable secondary shape, and controllably actuated to recover the permanent primary shape. Polymers have optimal aliphatic network structures due to minimization of dangling chains by using monomers that are symmetrical and that have matching amine and hydroxl groups providing polymers and polymer foams with clarity, tight (narrow temperature range) single transitions, and high shape recovery and recovery force that are especially useful for implanting in the human body.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Shape memory polymers

New shape memory polymer compositions, methods for synthesizing new shape memory polymers, and apparatus comprising an actuator and a shape memory polymer wherein the shape memory polymer comprises at least a portion of the actuator. A shape memory polymer comprising a polymer composition which physically forms a network structure wherein the polymer composition has shape-memory behavior and can be formed into a permanent primary shape, re-formed into a stable secondary shape, and controllably actuated to recover the permanent primary shape. Polymers have optimal aliphatic network structures due to minimization of dangling chains by using monomers that are symmetrical and that have matching amine and hydroxl groups providing polymers and polymer foams with clarity, tight (narrow temperature range) single transitions, and high shape recovery and recovery force that are especially useful for implanting in the human body.

Wilson, Thomas S.↗
NASA NTRS1995

Use of phosphoimidazolide-activated guanosine to investigate the nucleophilicity of spermine and spermidine

Guanosine 5'-phosphate 2-methylimidazolide (2-MeImpG), a labile phosphoimidazolide analog of guanosine triphosphate, was used to test the reactivity of the natural polyamines (PAs), spermine (spm) and spermidine (spd). The products are the guanosine 5'-phosphate-polyamine derivatives (PA-pG: spd-pG and spm-pG) which are quite stable in the range 4 < pH < 11. Our study is the first of which we are aware that reports on the nucleophilicity of these amines. The main findings are as follows. (i) HPLC analysis of the products indicates the formation of only two of the three possible spd products and only one of the two possible spm products. These results can be explained if only the primary amino groups of the two polyamines are reactive, while the secondary amino groups are rendered unreactive by a steric effect. The reactions of 2-MeImpG and other phosphoimidazolide derivatives of nucleosides (ImpNs) with primary and secondary monoamines support this interpretation (Kanavarioti et al. J. Org. Chem. 1995, 60, 632). (ii) The product ratio of the two spd-pG adducts derived from the primary amino groups varies between 2.40 and 0.71 in the range 6.1 < or equal to pH < or equal to 11.9. Such small variation in the product ratio can only be rationalized by the similar, but not identical, basicity of the two primary amino groups and provides strong support for a previously reported model for polyamine ionization (Onasch et. al. Biophys. Chem. 1984, 19, 245). (iii) On the basis of our kinetic determinations conditions at which the nucleophilicity of these amines is at a minimum and at which other interactions with ImpNs could be tested can be chosen.

NASA Discipline Exobiology↗
DOE OSTI2023

Cathode active materials for secondary batteries

A cathode active material of formula LiNi x Mn y Al z M α O 2-ε B ε or NaNi x′ Mn y′ Al z′ M′ α′ O 2-ε′ B ε′ , wherein M is a combination of Ti, and Mg; M′ is Ti, Mg, or a combination of thereof; B is selected from the group of F, S, Se, or Cl; 0.8<x<1, 0<y<0.2, 0<z≤0.2, 0≤α≤0.2, 0≤ε≤0.1, 0.5<x′<1, 0<y′<0.5, 0<z′≤0.2, 0≤α′≤0.2, and 0≤ε′≤0.1. The particle is a single crystal, a single particle, or a secondary particle comprising a plurality of primary particles; and the particle is a uniform composition or a concentration gradient composition.

Liu, Tongchao↗
DOE OSTI2025

Bypassing sulfides: comparing the morphology and performance of solution processed Cu(In,Ga)Se 2 films prepared via two selenide molecular precursor routes

Solution-processing of thin-film photovoltaics offers an alternative to vacuum-deposition based approaches. The amine–thiol reactive solvent system has become a focal point for the solution-processing of chalcogenide species, owing to the convenience of precursor preparation and comparatively high performance of prepared devices. Selenide species prepared via the amine–thiol route typically progress through a sulfide intermediate phase, and as such are commonly afflicted with sulfur and carbon impurities along- side the presence of a carbonaceous fine-grained layer. Here, two routes of preparing films directly to a selenide phase are examined; first by the co-dissolution of selenium in an amine–thiol solution and second via the novel use of reactive alkylammonium polyselenides. Lamella are cut from these selenide precursor films and final devices, and STEM-EDX and TEM are used to characterize film morphology and secondary phases. A champion device efficiency of 11.2% is reported for the novel polyselenide route, and clear paths of improvement are identified.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pushing Lithium–Sulfur Batteries towards Practical Working Conditions through a Cathode–Electrolyte Synergy

Abstract The commercialization of lithium–sulfur (Li−S) batteries is still hindered by the unsatisfactory cell performance under practical working conditions, which is mainly caused by the sluggish cathode redox kinetics, severe polysulfide shuttling, and poor Li stripping/plating reversibility. Herein, we report an effective strategy by combining Se‐doped S hosted in an ordered macroporous framework with a highly fluorinated ether (HFE)‐based electrolyte to simultaneously address the aforementioned issues in both cathode and anode. A reversible and stable high areal capacity of >5.4 mAh cm −2 with high Coulombic efficiency >99.2 % can be achieved under high areal Se/S loading (5.8 mg cm −2 ), while the underlying mechanism was further revealed through synchrotron X‐ray probes and Time‐of‐Flight Secondary Ion Mass Spectrometry (ToF‐SIMS). The practical application potential was further evaluated at low (0 °C) and high (55 °C) temperatures under high areal Se/S loading (>5.0 mg cm −2 ) and thin Li metal (40 μm).

Zhao, Chen↗
DOE OSTI2023

Accumulation mechanisms for contaminants on weak-base hybrid ion exchange resins

Mechanism of hexavalent chromium removal (Cr(VI) as CrO 4 2- ) by the weak-base ion exchange (IX) resin ResinTech® SIR-700-HP (SIR-700) from simulated groundwater is assessed in the presence of radioactive contaminants iodine-129 (as IO 3 - ), uranium (U as uranyl UO 2 2+ ), and technetium-99 (as TcO 4 - ), and common environmental anions sulfate (SO 4 2- ) and chloride (Cl-). Batch tests using the acid sulfate form of SIR-700 demonstrated Cr(VI) and U(VI) removal exceeded 97%, except in the presence of high SO 4 2- concentrations (536 mg/L) where Cr(VI) and U(VI) removal decreased to ≥ 80%. However, Cr(VI) removal notably improved with co-mingled U(VI) that complexes with SO 4 2- at the protonated amine sites. These U–SO 4 2- complexes are integral to U(VI) removal, as confirmed by the decrease in U(VI) removal (<40%) when the acid chloride form of SIR-700 was used instead. Solid phase characterization revealed that CrO 4 2- is removed by IX with SO 4 2- complexes and/or reduced to amorphous Cr(III)(OH) 3 at secondary alcohol sites. Tc(VII)O 4 - and I(V)O 3 - also undergo chemical reduction, following a similar removal mechanism. Oxyanion removal preference is determined by the anion reduction potential (CrO 4 2 - >TcO 4 - >IO 3 - ), geometry, and charge density. For these reasons, 39% and 69% of TcO 4 - and 17% and 39% of IO 3 - are removed in the presence and absence of Cr(VI), respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2024

Short Exploration Extravehicular Mobility Unit Testing Setup: Evaluation Under Realistic Pressure and Thermal Conditions

The purpose of Short Exploration Extravehicular Mobility Unit (SxEMU) thermal vacuum testing was to verify the functionality of the Design Verification Testing (DVT) prototype xEMU (SxEMU for this test) at vacuum pressures and extreme space and lunar surface temperature conditions. The SxEMU Thermal Vacuum Test was the culmination of the DVT xEMU project. This paper’s focus is on the pre-Extravehicular Activity (EVA) test setup, and general performance of the SxEMU Portable Life Support Subsystem (xPLSS), with focus on the performance of the Primary Oxygen Assembly (POA) and Secondary Oxygen Assembly (SOA), including Secondary Oxygen Regulator (SOR) takeover and the POA and SOA low-setpoint change inhibit. The initial pre-EVA test preparation included recharging the batteries and replenishing consumables, including test-system water, oxygen assemblies (with gaseous nitrogen), and the integrated thermal loops, including the Feedwater Supply Assemblies. xPLSS functionality testing included carbon dioxide (CO2) removal via the Rapid Cycle Amine swingbed system, thermal loop temperature control, and monitoring of suit ventilation loop pressure, temperature, and CO2 percentages. Testing evaluated automatic takeover of suit pressure control by the SOR after the primary oxygen supply is depleted. The Primary Oxygen Regulator and SOR low-setpoint change inhibit function prevents the crewmember from inadvertently setting the primary regulator to a low pressure setpoint during an EVA.

xPLSS↗
DOE OSTI2022

Pushing Lithium–Sulfur Batteries towards Practical Working Conditions through a Cathode–Electrolyte Synergy

The commercialization of lithium-sulfur (Li-S) batteries is still hindered by the unsatisfactory cell performance under practical working conditions, which is mainly caused by the sluggish cathode redox kinetics, severe polysulfide shuttling, and poor Li striping/platting reversibility. We reported an effective strategy by combining Se-doped S hosted in an ordered macroporous framework with highly fluorinated ether (HFE)-based electrolyte to simultaneously address the aforementioned issues in both cathode and anode. A reversible and stable high areal capacity of > 5.4 mAh cm -2 with high coulombic efficiency > 99.2% can be achieved under high areal Se/S loading (5.8 mg cm -2 ), while the underlying mechanism was further revealed through synchrotron X-ray probes and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The practical application potential was further evaluated at low (0 °C) and high (55 °C) temperatures under high areal Se/S loading (> 5.0 mg cm -2 ) and thin Li metal (40 µm).

25 ENERGY STORAGE↗
NASA NTRS1991

Design concepts for pressurized lunar shelters utilizing indigenous materials

The objective is to design a pressurized shelter build of indigenous lunar material. The topics are presented in viewgraph form and include the following: lunar conditions which impact design; secondary factors; review of previously proposed concepts; cross section of assembly facility; rationale for indigenous materials; indigenous material choices; cast basalt properties; design variables; design 1, cylindrical segments; construction sequence; design 2, arch-slabs with post-tensioned ring girders; and future research.

Happel, John Amin↗
DOE OSTI2022

Electroactive materials for secondary batteries

A [P x Sb y M z ]p/[carbon] q composite where x, y, and z represent atomic percentage values and are x>0; y>0; and z≥0, M is an electrically conductive metal, p and q represent the weight percentage values of the composite wherein p and q are in the range of 0-100%, and is p>0.

25 ENERGY STORAGE↗
DOE OSTI2026

Evaluation of UKESM aerosol size and composition using ATom measurements indicates missing marine aerosol formation mechanisms

Atmospheric aerosols influence climate through their interactions with radiation and clouds, yet large uncertainties remain in their simulation by global models. This study evaluates the United Kingdom Earth System Model version 1.1 (UKESM1.1) using global-scale aircraft observations from the Atmospheric Tomography (ATom) mission, focusing on aerosol lifecycle processes in the remote marine atmosphere. We assess model performance in simulating aerosol precursor vapours, number size distributions, chemical composition, and environmental conditions. Several process improvements are tested, including sulfuric acid-ammonia nucleation, ammonium nitrate scheme, methanesulfonic acid condensation, and low-temperature isoprene-derived secondary organic aerosol formation. Model biases differ significantly between the upper troposphere (UT) and the marine boundary layer (MBL). In the UT, UKESM1.1 overestimates nucleation and Aitken mode particles while underestimating accumulation mode, indicating insufficient growth. In the MBL, the model overestimates primary aerosols (e.g. seasalt) and precursor gases but underestimates nucleation and Aitken mode particles, even after incorporating updated nucleation and ammonium nitrate scheme. The persistence of low aerosol number concentrations, despite overestimated precursors, suggests missing formation pathways likely involving other species such as iodine, amines, and organic vapours. These limitations result in an unbalanced cloud condensation nuclei budget that over-relies on primary emissions. Sensitivity tests reveal that model outputs are strongly influenced by dimethyl sulfide emissions and vapour condensation schemes. Our results highlight the need for future model development to prioritise mechanistic representation of currently missing aerosol sources, rather than relying on empirical tuning, to improve aerosol-climate interaction estimates.

He, Xu-Cheng [Univ. of Cambridge (United Kingdom);↗
DOE OSTI2021

Overview and technology opportunities for thermochemically-produced bio-blendstocks

Global demand for transportation fuels is projected to increase 40% by 2040, and biomass-derived fuels (biofuels) play a crucial role in substituting fossil fuels and mitigating greenhouse gas emissions. Currently, biofuels are mainly consumed as blendstocks combined with petroleum-based fuels, and effective conversion technologies can address the quality challenges for offering standalone biofuels. Thermochemical conversion process is one of the most promising pathways among existing technologies for biofuel production. However, the major barriers are unwanted characteristics (e.g., thermal instability) of intermediate products, such as bio-oil, and required upgrading treatments for producing compatible fuels. Here, this study highlights the merits and critical challenges of thermochemical conversion and physicochemical upgrading technologies for bio-blendstock production from lignocellulosic biomass. The novelty of this study lies in potential directions for future research through both critical and systematic literature reviews, and the proposed intensified process for lignocellulosic-based fuel blendstocks production. It is concluded that recovery and fractionation strategies (e.g., quenching and stripping) can maximize process yields and add values in the efficient conversion pathways. Effective quenching can stop secondary free radical reactions and improve liquid yields over gas and solid yields. Stripping process can improve process yield, catalyst lifespan, and thermal stability. It is further concluded that physicochemical treatments are not as effective as thermochemical treatments, but have advantages of mild operating conditions and potential for integrated solutions in conjunction with other treatments.

09 BIOMASS FUELS↗
DOE OSTI2021

A Machine Learning-Based Method to Estimate Transformer Primary-Side Voltages with Limited Customer-Side AMI Measurements

Distribution control applications such as volt/var optimization, network reconfiguration, and distribution automation require accurate knowledge of the distribution system state. The lack of sufficient sensors on the primary side of distribution networks often limits the accuracy of the control decisions by these applications. The deployment of advanced metering infrastructure (AMI) provides utilities an opportunity to translate the AMI data on the secondary onto the primary so that it can be used as pseudo-measurements to augment the limited existing measurements on the primary. This paper develops a machine learning based approach for estimating service transformer primary-side voltages by using limited secondary-side AMI measurement. The machine learning model is developed by using random forest algorithm. The estimated primary-side voltages can be used by utilities as pseudo-measurements for distribution control applications. The detailed secondary model topology, which is an essential input data for many existing algorithms, is not required for the proposed method. The performance of the proposed method is validated by using AMI measurements from the field and an actual distribution feeder model of San Diego Gas & Electric Company.

advanced metering infrastructure↗